Download or read book Motion and Vibration Control written by Heinz Ulbrich and published by Springer Science & Business Media. This book was released on 2008-12-23 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motion and vibration control is a fundamental technology for the development of advanced mechanical systems such as mechatronics, vehicle systems, robots, spacecraft, and rotating machinery. Often the implementation of high performance, low power consumption designs is only possible with the use of this technology. It is also vital to the mitigation of natural hazards for large structures such as high-rise buildings and tall bridges, and to the application of flexible structures such as space stations and satellites. Recent innovations in relevant hardware, sensors, actuators, and software have facilitated new research in this area. This book deals with the interdisciplinary aspects of emerging technologies of motion and vibration control for mechanical, civil and aerospace systems. It covers a broad range of applications (e.g. vehicle dynamics, actuators, rotor dynamics, biologically inspired mechanics, humanoid robot dynamics and control, etc.) and also provides advances in the field of fundamental research e.g. control of fluid/structure integration, nonlinear control theory, etc. Each of the contributors is a recognised specialist in his field, and this gives the book relevance and authority in a wide range of areas.

Download or read book Active Control of Vibration written by Christopher C. Fuller and published by Academic Press. This book was released on 1996-02-08 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a companion text to Active Control of Sound by P.A. Nelson and S.J. Elliott, also published by Academic Press. It summarizes the principles underlying active vibration control and its practical applications by combining material from vibrations, mechanics, signal processing, acoustics, and control theory. The emphasis of the book is on the active control of waves in structures, the active isolation of vibrations, the use of distributed strain actuators and sensors, and the active control of structurally radiated sound. The feedforward control of deterministic disturbances, the active control of structural waves and the active isolation of vibrations are covered in detail, as well as the more conventional work on modal feedback. The principles of the transducers used as actuateors and sensors for such control strategies are also given an in-depth description. The reader will find particularly interesting the two chapters on the active control of sound radiation from structures: active structural acoustic control. The reason for controlling high frequency vibration is often to prevent sound radiation, and the principles and practical application of such techniques are presented here for both plates and cylinders. The volume is written in textbook style and is aimed at students, practicing engineers, and researchers. Combines material from vibrations, signal processing, mechanics, and controls Summarizes new research in the field

Download or read book Vibration with Control written by Daniel J. Inman and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced look at vibration analysis with a focus on active vibration suppression As modern devices, from cell phones to airplanes, become lighter and more flexible, vibration suppression and analysis becomes more critical. Vibration with Control, 2nd Edition includes modelling, analysis and testing methods. New topics include metastructures and the use of piezoelectric materials, and numerical methods are also discussed. All material is placed on a firm mathematical footing by introducing concepts from linear algebra (matrix theory) and applied functional analysis when required. Key features: Combines vibration modelling and analysis with active control to provide concepts for effective vibration suppression. Introduces the use of piezoelectric materials for vibration sensing and suppression. Provides a unique blend of practical and theoretical developments. Examines nonlinear as well as linear vibration analysis. Provides Matlab instructions for solving problems. Contains examples and problems. PowerPoint Presentation materials and digital solutions manual available for instructors. Vibration with Control, 2nd Edition is an ideal reference and textbook for graduate students in mechanical, aerospace and structural engineering, as well as researchers and practitioners in the field.

Download or read book Vibration Damping Control and Design written by Clarence W. de Silva and published by CRC Press. This book was released on 2007-04-05 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reducing and controlling the level of vibration in a mechanical system leads to an improved work environment and product quality, reduced noise, more economical operation, and longer equipment life. Adequate design is essential for reducing vibrations, while damping and control methods help further reduce and manipulate vibrations when design strat

Download or read book Handbook of Noise and Vibration Control written by Malcolm J. Crocker and published by John Wiley & Sons. This book was released on 2007-10-05 with total page 1594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two of the most acclaimed reference works in the area of acoustics in recent years have been our Encyclopedia of Acoustics, 4 Volume set and the Handbook of Acoustics spin-off. These works, edited by Malcolm Crocker, positioned Wiley as a major player in the acoustics reference market. With our recently published revision of Beranek & Ver's Noise and Vibration Control Engineering, Wiley is a highly respected name in the acoustics business. Crocker's new handbook covers an area of great importance to engineers and designers. Noise and vibration control is one largest areas of application of the acoustics topics covered in the successful encyclopedia and handbook. It is also an area that has been under-published in recent years. Crocker has positioned this reference to cover the gamut of topics while focusing more on the applications to industrial needs. In this way the book will become the best single source of need-to-know information for the professional markets.

Download or read book Noise and Vibration Control Engineering written by István L. Vér and published by John Wiley & Sons. This book was released on 2005-11-11 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise and Vibration Control Engineering: Principles and Applications, Second Edition is the updated revision of the classic reference containing the most important noise control design information in a single volume of manageable size. Specific content updates include completely revised material on noise and vibration standards, updated information on active noise/vibration control, and the applications of these topics to heating, ventilating, and air conditioning.

Download or read book Vibration Control For Optomechanical Systems written by Vyacheslav M Ryaboy and published by World Scientific. This book was released on 2021-11-29 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration presents a major challenge to advanced experiments and technological processes in engineering, physics and life sciences that rely on optics and optoelectronics. This compendium discusses ways in which vibration may affect optical performance and describes methods and means of reducing this impact. Principal methods of vibration control, namely, damping and isolation are highlighted using mathematical models and real-life examples.The unique text covers some topics that are important for optomechanical applications but are lacking in general vibration texts, such as dynamics and stability of elastically supported systems with high centers of gravity, physics of pneumatic isolators, and application of dynamic absorbers to vibration-isolated systems.This useful reference book enables the reader to apply the vibration control tools properly and perform basic analytical and experimental tasks of estimating and verifying their performance. It is also a must-have textbook for undergraduate or graduate-level courses in vibration control and optomechanics.Related Link(s)

Download or read book Precision Motion Control written by Kok K. Tan and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision manufacturing is a development that has been gathering momentum over the last century and accelerating over the last 25 years in terms of research, development, and application to product innovation. The driving force in this development arises from requirements for much higher performance of products, higher reliability, longer life, lower cost, and miniaturization. This development is widely known as precision engineering and, today, it is generally defined as manufacturing to tolerances which are better than one part in 105. Applications are abound and can be found in various semiconductor processes (e.g., lithography, wafer probing, inspection), Coordinate Measuring Machines (CMMs) and precision metrology systems (e.g., Scanning Probe Microscopy (SPM)), and robot/machine tools to carry out micro-assembly (e.g., MEMS) and delicate short wavelength laser processes. As an enabling technology for precision engineering, precision instrumentation and measurement, geometrical calibration and compensation, and motion control are directly important issues to be addressed in the overall system design and realization. This book is focused on these aspects of precision engineering. It is a compilation of the major results and publications from a major project which develop a state-of-the-art high-speed, ultra-precision robotic system. A comprehensive and thorough treatment of the subject matter is provided in a manner that is amenable to a broad base of readers, ranging from the academics to the practitioners, by providing detailed experimental verifications of the developed materials.

Download or read book Vibration Control and Actuation of Large Scale Systems written by Hamid Reza Karimi and published by Academic Press. This book was released on 2020-05-20 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration Control and Actuation of Large-Scale Systems gives a systematically and self-contained description of the many facets of envisaging, designing, implementing, or experimentally exploring advanced vibration control systems. The book is devoted to the development of mathematical methodologies for vibration analysis and control problems of large-scale systems, including structural dynamics, vehicle dynamics and wind turbines, for example. The research problems addressed in each chapter are well motivated, with numerical and simulation results given in each chapter that reflect best engineering practice. Provides a series of the latest results in vibration control, structural control, actuation, component failures, and more Gives numerical and simulation results to reflect best engineering practice Presents recent advances of theory, technological aspects, and applications of advanced control methodologies in vibration control

Download or read book IUTAM Symposium on Vibration Control of Nonlinear Mechanisms and Structures written by H. Ulbrich and published by Springer Science & Business Media. This book was released on 2006-01-28 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decades, the growth of micro-electronics has reduced the cost of computing power to a level acceptable to industry and has made possible sophisticated control strategies suitable for many applications. Vibration c- trol is applied to all kinds of engineering systems to obtain the desired dynamic behavior, improved accuracy and increased reliability during operation. In this context, one can think of applications related to the control of structures’ vib- tion isolation, control of vehicle dynamics, noise control, control of machines and mechanisms and control of ?uid-structure-interaction. One could continue with this list for a long time. Research in the ?eld of vibration control is extremely comprehensive. Pr- lems that are typical for vibration control of nonlinear mechanisms and str- tures arise in the ?elds of modeling systems in such a way that the model is suitable for control design, to choose appropriate actuator and sensor locations and to select the actuators and sensors. Theobjective of the Symposium was to present anddiscuss methodsthat contribute to thesolution of such problems and to demonstrate the state of the art inthe ?eld shown by typical examples. The intention was to evaluate the limits of performance that can beachievedby controlling the dynamics, and to point out gaps in present research and give links for areas offuture research.Mainly, it brought together leading experts from quite different areas presenting theirpoints of view.

Download or read book Responsive Systems for Active Vibration Control written by A. Preumont and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural vibrations have become the critical factor limiting the performance of many engineering systems, typical amplitudes ranging from meters to a few nanometers. Many acoustic nuisances in transportation systems and residential and office buildings are also related to structural vibrations. The active control of such vibrations involves nine orders of magnitude of vibration amplitude, which exerts a profound influence on the technology. Active vibration control is highly multidisciplinary, involving structural vibration, acoustics, signal processing, materials science, and actuator and sensor technology. Chapters 1-3 of this book provide a state-of-the-art introduction to active vibration control, active sound control, and active vibroacoustic control, respectively. Chapter 4 discusses actuator/sensor placement, Chapter 5 deals with robust control of vibrating structures, Chapter 6 discusses finite element modelling of piezoelectric continua and Chapter 7 addresses the latest trends in piezoelectric multiple-degree-of-freedom actuators/sensors. Chapters 8-12 deal with example applications, including semi-active joints, active isolation and health monitoring. Chapter 13 addresses MEMS technology, while Chapter 14 discusses the design of power amplifiers for piezoelectric actuators.

Download or read book The 4th International Workshop on Structural Control written by Andrew Smyth and published by DEStech Publications, Inc. This book was released on 2005 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the research and applications on sensing technologies to monitor and control the structure and health of buildings, bridges, installations, and other constructed facilities.

Download or read book Vibration Control for Building Structures written by Aiqun Li and published by Springer Nature. This book was released on 2020-03-11 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive introduction to the field of structural vibration reduction control, but may also be used as a reference source for more advanced topics. The content is divided into four main parts: the basic principles of structural vibration reduction control, structural vibration reduction devices, structural vibration reduction design methods, and structural vibration reduction engineering practices. As the book strikes a balance between theoretical and practical aspects, it will appeal to researchers and practicing engineers alike, as well as graduate students.

Download or read book The Fifth International Conference on Motion and Vibration Control written by Bijan Samali and published by . This book was released on 2000 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vibration Control Engineering written by Ernesto Novillo and published by CRC Press. This book was released on 2021-12-09 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book applies vibration engineering to turbomachinery, covering installation, maintenance and operation. With a practical approach based on clear theoretical principles and formulas, the book is an essential how-to guide for all professional engineers dealing with vibration issues within turbomachinery. Vibration problems in turbines, large fans, blowers, and other rotating machines are common issues within turbomachinery. Applicable to industries such as oil and gas mining, cement, pharmaceutical and naval engineering, the ability to predict vibration based on frequency spectrum patterns is essential for many professional engineers. In this book, the theory behind vibration is clearly detailed, providing an easy to follow methodology through which to calculate vibration propagation. Describing lateral and torsional vibration and how this impacts turbine shaft integrity, the book uses mechanics of materials theory and formulas alongside the matrix method to provide clear solutions to vibration problems. Additionally, it describes how to carry out a risk assessment of vibration fatigue. Other topics covered include vibration control techniques, the design of passive and active absorbers and rigid, non-rigid and Z foundations. The book will be of interest to professionals working with turbomachinery, naval engineering corps and those working on ISO standards 10816 and 13374. It will also aid mechanical engineering students working on vibration and machine design.

Download or read book Dynamic Modeling and Active Vibration Control of Structures written by Moon Kyu Kwak and published by Springer Nature. This book was released on 2021-08-14 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the active vibration control techniques which have been developed to suppress excessive vibrations of structures. It covers the fundamental principles of active control methods and their applications and shows how active vibration control techniques have replaced traditional passive vibration control. The book includes coverage of dynamic modeling, control design, sensing methodology, actuator mechanism and electronic circuit design, and the implementation of control algorithms via digital controllers. An in-depth approach has been taken to describe the modeling of structures for control design, the development of control algorithms suitable for structural control, and the implementation of control algorithms by means of Simulink block diagrams or C language. Details of currently available actuators and sensors and electronic circuits for signal conditioning and filtering have been provided based on the most recent advances in the field. The book is used as a textbook for students and a reference for researchers who are interested in studying cutting-edge technology. It will be a valuable resource for academic and industrial researchers and professionals involved in the design and manufacture of active vibration controllers for structures in a wide variety of fields and industries including the automotive, rail, aerospace, and civil engineering sectors.

Download or read book Nonlinear Dynamics and Vibration Control of Flexible Systems written by JIE HUANG and published by CRC Press. This book was released on 2022-10-04 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an essential guide to nonlinear dynamics and vibration control, detailing both the theory and the practical industrial applications within all aspects of engineering. Demonstrating how to improve efficiency through reducing unwanted vibration, it will aid both students and engineers in practically and safely improving flexible structures through control methods. Increasing demand for light-weight robotic systems and space applications has actuated the design and construction of more flexible structures. These flexible structures, involving numerous dynamic systems, experience unwanted vibrations, impacting accuracy, operating speed, safety and, importantly, efficiency. This book aids engineers in assuaging this issue through vibration control methods, including nonlinear dynamics. It covers topics such as dynamic modeling of nonlinear system, nonlinear oscillators, and modal analyses of multiple-mode system. It also looks at vibration control methods including linear control, nonlinear control, intelligent control, and command smoothers. These control methods are effective and reliable methods to counteract unwanted vibrations. The book is practically minded, using industrial applications throughout, such as bridge cranes, tower cranes, aerial cranes and liquid sloshing. It also discusses cable-suspension structures, light-weight links, and fluid motions which exhibit flexible-structure dynamics. The book will be of interest to students and engineers alike, in the field of mechatronics, mechanical systems and signal processing, nonlinear dynamics, vibration, and control engineering.