Download or read book Intumescent Coatings for Fire Protection of Building Structures and Materials written by Olga Zybina and published by Springer Nature. This book was released on 2020-11-04 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides practical recommendations for creation of fire retardant materials with an increased service life. The enhanced fire resistance seen in these materials is based on the regularities of the chemical and physicochemical interaction of the components of intumescent composition in the process of thermolytic synthesis of heat-insulating char-foamed layers. The aim of fire protection of various objects with intumescent materials is to create a heat-insulating charred layer on the surface of structural elements; this layer can withstand high temperatures and mechanical damage which are typical during fires. The authors describe the contribution of basic components (melamine, pentaerythritol, ammonium polyphosphate), additional components (chlorinated paraffin, urea, cellulose, carbon nano additives, etc.) and polymer binders of intumescent compositions on the process of charring. The technological aspects of manufacturing, application and operation of fire retardant intumescent compositions, which can be useful for organizations that produce and use fire retardant materials, are also described.
Download or read book The Non halogenated Flame Retardant Handbook written by Alexander B. Morgan and published by John Wiley & Sons. This book was released on 2014-04-07 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-stop, practical handbook containing all of the current commercial non-halogenated flame retardant technologies as well as experimental systems near commercialization In response to the emphasis on replacing halogenated flame retardants with alternate technologies, this handbook focuses on existing non-halogenated flame retardants and the experimental close-to-production systems that are available today. The Non-Halogenated Flame Retardant Handbook starts with an overview of the regulations and customer perceptions driving non-halogenated flame retardant selections over older halogenated technologies. It then moves on to cover the known major classes of non-halogenated flame retardants, before concluding with the current niche-performing technologies and untried commercial contenders of the future. The Non-Halogenated Flame Retardant Handbook: Takes a practical approach to addressing the narrow subject of non-halogenated flame retardancy—placing more emphasis on flame retardant selection for specific plastics, practical considerations in flame retardant material design, and the various technologies’ strengths and limits Focuses on the proper use of non-halogenated flame retardants, rather than the mechanics of how they work Discusses important future trends in flame retardancy Features sections written by industrial and chemical experts who know how to apply the technology to polymers for fire safety needs
Download or read book Fire Retardancy of Polymeric Materials written by Charles A. Wilkie and published by CRC Press. This book was released on 2024-07-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Fire Retardancy of Polymeric Materials provides a single source for all aspects of this highly challenging field of applied research. This authoritative book covers design and non-fire requirements that drive how these materials are fire protected. Detailed study and consideration of chemistry, physics, materials science, economic issues and fire safety science is necessary to address considerations of mechanical, thermal, environmental, and end-use requirements on top of fire protection means that the field requires. This thoroughly revised new edition continues to offer comprehensive coverage of the scientific approach for those developing fire safe materials. It covers new topics such as bio-based materials, regulatory issues, recycling, newer flame retardant chemical classes, and more details on how to flame retard materials for specific market applications. Written by a team of experts, this book covers the fundamentals of polymer burning and combustion and how to apply fire protection or flame-retardant chemistries to specific material classes and applications. The book is written for material scientists and fire safety scientists who seek to develop new fire safe materials or understand why materials burn in our modern environment. Features Connects fundamentals of material flammability to practical fire safety needs Covers current fire safety requirements and regulations affecting flame retardant selection Provides information on chemical structure-property relationships for flame retardancy Provides practical guidance on how to design fire safe materials for specific fire risk scenarios The new edition is expanded to 32 chapters and all chapters are updated and revised with the newest information
Download or read book Fire Safety Engineering Design of Structures Third Edition written by John A. Purkiss and published by CRC Press. This book was released on 2013-12-05 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing structures to withstand the effects of fire is challenging, and requires a series of complex design decisions. This third edition of Fire Safety Engineering Design of Structures provides practising fire safety engineers with the tools to design structures to withstand fires. This text details standard industry design decisions, and offers expert design advice, with relevant historical data. It includes extensive data on materials’ behaviour and modeling -- concrete, steel, composite steel-concrete, timber, masonry, and aluminium. While weighted to the fire sections of the Eurocodes, this book also includes historical data to allow older structures to be assessed. It extensively covers fire damage investigation, and includes as far back as possible, the background to code methods to enable the engineer to better understand why certain procedures are adopted. What’s new in the Third Edition? An overview in the first chapter explains the types of design decisions required for optimum fire performance of a structure, and demonstrates the effect of temperature rise on structural performance of structural elements. It extends the sections on less common engineering materials. The section on computer modelling now includes material on coupled heat and mass transfer, enabling a better understanding of the phenomenon of spalling in concrete. It includes a series of worked examples, and provides an extensive reference section. Readers require a working knowledge of structural mechanics and methods of structural design at ambient conditions, and are helped by some understanding of thermodynamics of heat transfer. This book serves as a resource for engineers working in the field of fire safety, consultants who regularly carry out full fire safety design for structure, and researchers seeking background information. Dr John Purkiss is a chartered civil and structural engineer/consultant and former lecturer in structural engineering at Aston University, UK. Dr Long-Yuan Li is Professor of Structural Engineering at Plymouth University, UK, and a Fellow of the Institution of Structural Engineers.
Download or read book Inverse Heat Conduction written by James V. Beck and published by James Beck. This book was released on 1985-10-02 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is the only commercially published work to deal with the engineering problem of determining surface heat flux and temperature history based on interior temperature measurements. Provides the analytical techniques needed to arrive at otherwise difficult solutions, summarizing the findings of the last ten years. Topics include the steady state solution, Duhamel's Theorem, ill-posed problems, single future time step, and more.
Download or read book Applications of Fire Engineering written by Martin Gillie and published by CRC Press. This book was released on 2017-09-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book holds the proceedings of the Conference on Applications of Structural Fire Engineering (ASFE 2017), held on September 7-8, 2017, in Manchester, UK. The ASFE’17 conference will be the next in a series (2009, 2011, 2013, 2015) of successful conferences that aim to bring together experts and specialists in design against fire from all over the world to share ideas and to acquire knowledge in the field of structural fire engineering. Practice in structural engineering increasingly accepts the benefits of performancebased approaches to the design of structures for fire resistance. This conference will focus on the application of design methods, both manual and computational, for structures to resist fire. Particularly relevant themes will be fire modelling, simulation of the heat transfer between fire and structures, and modelling of structural behaviour at elevated temperatures using numerical methods or software implementations of design codes.
Download or read book Polymer Composites with Functionalized Nanoparticles written by Krzysztof Pielichowski and published by Woodhead Publishing. This book was released on 2018-09-22 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Composites with Functional Nanoparticles: Synthesis, Properties, and Applications reviews the latest research in the area of polymer nanocomposites and functionalized nanoparticles, providing an introduction for those new to the field, and supporting further research and development. The book helps researchers and practitioners better understand the key role of nanoparticle functionalization for improving the compatibility of inorganic metallic nanomaterials with organic polymers, and for the fabrication of nanostructured materials with special properties. A range of nanoparticles, such as carbon nanotubes are covered, along with descriptions of the methods of functionalization to support better compatibility with polymer matrices. The book also discusses the various applications of this technology, including uses in electronics and the medical and energy industries. - Summarizes the latest research in functionalized nanoparticles for modification of polymer matrices, providing a valuable platform for further research - Includes functionalization of a range of nanoparticles for incorporation into nanocomposites, including carbon nanotubes, graphene, gold and silver, silica and clay - Provides detailed coverage of application areas, including energy, electronics, biomedical applications, and end-of-life considerations
Download or read book Polymer Green Flame Retardants written by Constantine D. Papaspyrides and published by Newnes. This book was released on 2014-08-14 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Green Flame Retardants covers key issues regarding the response of polymers during fire, the mechanisms of their flame retardation, the regulations imposed on their use, and the health hazards arising from their combustion. Presenting the latest research developments, the book focuses in particular on nanocomposites, believed to be the most promising approach for producing physically superior materials with low flammability and ecological impact. The fire properties of nanocomposites of various matrixes and fillers are discussed, the toxicological characteristics of these materials are analyzed, addressing also their environmental sustainability. Edited by distinguished scientists, including an array of international industry and academia experts, this book will appeal to chemical, mechanical, environmental, material and process engineers, upper-level undergraduate and graduate students in these disciplines, and generally to researchers developing commercially attractive and environmentally friendly fire-proof products. - Provides recent findings on the manufacture of environmentally sustainable flame retardant polymeric materials - Covers legislation and regulations concerning flame retarded polymeric material use - Includes tables containing the fire properties of the most common polymeric materials
Download or read book Fire Retardancy of Polymers written by M Le Bras and published by Elsevier. This book was released on 1998-01-01 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the following topics: Strategies; Intumescence: Mechanism studies; New intumescent polymetric materials; Flame retarded intumescent textiles; Intumescence - an environmentally friendly process?
Download or read book Fire Retardancy of Polymers written by T. Richard Hull and published by Royal Society of Chemistry. This book was released on 2009 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Globally, fire retardants are needed to satisfy a multibillion dollar market and fire retardancy of polymetric materials is an important component of fire safety. This book covers the latest developments in new fire retardancy systems for engineers needing to use fire safe materials in their projects.
Download or read book Fixed Offshore Platforms Structural Design for Fire Resistance written by Mavis Sika Okyere and published by CRC Press. This book was released on 2018-06-19 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the fire-resistant design of fixed offshore platforms. It describes the required loading, load combinations, strength and stability checks for structural elements. It also explains the design of tubular joints, fatigue analysis, dynamic analysis, and impact analysis, Fire resistance, fire, explosion and blast effect analysis, fire protection materials, and safety.
Download or read book Structures in Fire written by Venkatesh Kodur and published by DEStech Publications, Inc. This book was released on 2010 with total page 1047 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tubular Structures VIII written by Y.S. Choo and published by Routledge. This book was released on 2022-03-31 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1998. Looking at the architecture and engineering of tubular structures, and the behaviour of section joints, members and frames under different loads and conditions, this book provides a reference point for both civil and mechanical engineers.
Download or read book Tubular Structures XIV written by Leroy Gardner and published by CRC Press. This book was released on 2012-08-24 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tubular Structures XIV contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the 14th International Symposium on Tubular Structures (ISTS14, Imperial College London, UK, 12-14 September 2012). The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for b
Download or read book Metals Abstracts written by and published by . This book was released on 1996 with total page 1622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Material Science and Engineering written by Mokhtar Awang and published by Springer Nature. This book was released on 2021-07-05 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 6th International Conference on Mechanical, Manufacturing and Plant Engineering (ICMMPE 2020), held virtually via Google Meet. It highlights the latest advances in the emerging area, brings together researchers and professionals in the field and provides a valuable platform for exchanging ideas and fostering collaboration. Joining technologies could be changed to manufacturing technologies. Addressing real-world problems concerning joining technologies that are at the heart of various manufacturing sectors, the respective papers present the outcomes of the latest experimental and numerical work on problems in soldering, arc welding and solid-state joining technologies.
Download or read book Fire Protection Engineering Applications for Large Transportation Systems in China written by Fang Li and published by Springer Nature. This book was released on 2020-11-11 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid development of China’s transportation system brings huge challenges to fire safety issues. Fire Protection Engineering Applications for Large Transportation Systems in Chinaanalyzes key fire issues for large transportation systems in rail, airport, tunnels, etc. and offers solutions and best practices for similar projects throughout the world. The first monograph to look at transportation hub fire issues in China looks at architecture features, occupancy and area classification, fire hazard and design difficulties based on local code design. The book then provides case studies to identity the common problems and introduces possible solutions in order to develop a best practice for future design and improvement. The authors worked directly on the case studies provided, which include the Hongqiao airport transportation hub, Beijing and Pudoing airport PBD study, subways in different cities and the high speed train system Cross China. They use their research and investigation to form the theoretical basis for the fire design of urban large transportation hubs and the establishment of corresponding fire codes. The cutting-edge technologies discussed include: Smoke control strategy in complicated multiple function space, assistant evacuation performance based study new technology on fire separation new fire products for smoke detection and intelligent guiding system for evacuation BIM and internet of things used to improve fire management
