Download or read book Microwave Circuit Design Using Linear and Nonlinear Techniques written by George D. Vendelin and published by John Wiley & Sons. This book was released on 2005-10-03 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate handbook on microwave circuit design with CAD. Full of tips and insights from seasoned industry veterans, Microwave Circuit Design offers practical, proven advice on improving the design quality of microwave passive and active circuits-while cutting costs and time. Covering all levels of microwave circuit design from the elementary to the very advanced, the book systematically presents computer-aided methods for linear and nonlinear designs used in the design and manufacture of microwave amplifiers, oscillators, and mixers. Using the newest CAD tools, the book shows how to design transistor and diode circuits, and also details CAD's usefulness in microwave integrated circuit (MIC) and monolithic microwave integrated circuit (MMIC) technology. Applications of nonlinear SPICE programs, now available for microwave CAD, are described. State-of-the-art coverage includes microwave transistors (HEMTs, MODFETs, MESFETs, HBTs, and more), high-power amplifier design, oscillator design including feedback topologies, phase noise and examples, and more. The techniques presented are illustrated with several MMIC designs, including a wideband amplifier, a low-noise amplifier, and an MMIC mixer. This unique, one-stop handbook also features a major case study of an actual anticollision radar transceiver, which is compared in detail against CAD predictions; examples of actual circuit designs with photographs of completed circuits; and tables of design formulae.
Download or read book Microwave Integrated Circuit Components Design through MATLAB written by S Raghavan and published by CRC Press. This book was released on 2019-11-11 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: MICROWAVE INTEGRATED CIRCUIT COMPONENTS DESIGN THROUGH MATLAB® This book teaches the student community microwave integrated circuit component design through MATLAB®, helping the reader to become conversant in using codes and, thereafter, commercial software for verification purposes only. Microwave circuit theory and its comparisons, transmission line networks, S-parameters, ABCD parameters, basic design parameters of planar transmission lines (striplines, microstrips, slot lines, coplanar waveguides, finlines), filter theory, Smith chart, inverted Smith chart, stability circles, noise figure circles and microwave components, are thoroughly explained in the book. The chapters are planned in such a way that readers get a thorough understanding to ensure expertise in design. Aimed at senior undergraduates, graduates and researchers in electrical engineering, electromagnetics, microwave circuit design and communications engineering, this book: • Explains basic tools for design and analysis of microwave circuits such as the Smith chart and network parameters • Gives the advantage of realizing the output without wiring the circuit by simulating through MATLAB code • Compares distributed theory with network theory • Includes microwave components, filters and amplifiers S. Raghavan was a Senior Professor (HAG) in the Department of Electronics and Communication Engineering, National Institute of Technology (NIT), Trichy, India and has 39 years of teaching and research experience at the Institute. His interests include: microwave integrated circuits, RF MEMS, Bio MEMS, metamaterial, frequency selective surfaces (FSS), substrate integrated waveguides (SIW), biomedical engineering and microwave engineering. He has established state-of-the-art MICs and microwave research laboratories at NIT, Trichy with funding from the Indian government. He is a Fellow/Senior Member in more than 24 professional societies including: IEEE (MTT, EMBS, APS), IETE, IEI, CSI, TSI, ISSS, ILA and ISOI. He is twice a recipient of the Best Teacher Award, and has received the Life Time Achievement Award, Distinguished Professor of Microwave Integrated Circuit Award and Best Researcher Award.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Millimeter Wave Antennas Configurations and Applications written by Jaco du Preez and published by Springer. This book was released on 2016-06-20 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively reviews the state of the art in millimeter-wave antennas, traces important recent developments and provides information on a wide range of antenna configurations and applications. While fundamental theoretical aspects are discussed whenever necessary, the book primarily focuses on design principles and concepts, manufacture, measurement techniques, and practical results. Each of the various antenna types scalable to millimeter-wave dimensions is considered individually, with coverage of leaky-wave and surface-wave antennas, printed antennas, integrated antennas, and reflector and lens systems. The final two chapters address the subject from a systems perspective, providing an overview of supporting circuitry and examining in detail diverse millimeter-wave applications, including high-speed wireless communications, radio astronomy, and radar. The vast amount of information now available on millimeter-wave systems can be daunting for researchers and designers entering the field. This book offers readers essential guidance, helping them to gain a thorough understanding based on the most recent research findings and serving as a sound basis for informed decision-making.
Download or read book Research in Progress written by and published by . This book was released on 1990 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Nanofabrication Techniques and Applications written by Bo Cui and published by BoD – Books on Demand. This book was released on 2011-12-02 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology has experienced a rapid growth in the past decade, largely owing to the rapid advances in nanofabrication techniques employed to fabricate nano-devices. Nanofabrication can be divided into two categories: "bottom up" approach using chemical synthesis or self assembly, and "top down" approach using nanolithography, thin film deposition and etching techniques. Both topics are covered, though with a focus on the second category. This book contains twenty nine chapters and aims to provide the fundamentals and recent advances of nanofabrication techniques, as well as its device applications. Most chapters focus on in-depth studies of a particular research field, and are thus targeted for researchers, though some chapters focus on the basics of lithographic techniques accessible for upper year undergraduate students. Divided into five parts, this book covers electron beam, focused ion beam, nanoimprint, deep and extreme UV, X-ray, scanning probe, interference, two-photon, and nanosphere lithography.
Download or read book Technology for the United States Navy and Marine Corps 2000 2035 Becoming a 21st Century Force written by National Research Council and published by National Academies Press. This book was released on 1997-12-19 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The future national security environment will present the naval forces with operational challenges that can best be met through the development of military capabilities that effectively leverage rapidly advancing technologies in many areas. The panel envisions a world where the naval forces will perform missions in the future similar to those they have historically undertaken. These missions will continue to include sea control, deterrence, power projection, sea lift, and so on. The missions will be accomplished through the use of platforms (ships, submarines, aircraft, and spacecraft), weapons (guns, missiles, bombs, torpedoes, and information), manpower, materiel, tactics, and processes (acquisition, logistics,and so on.). Accordingly, the Panel on Technology attempted to identify those technologies that will be of greatest importance to the future operations of the naval forces and to project trends in their development out to the year 2035. The primary objective of the panel was to determine which are the most critical technologies for the Department of the Navy to pursue to ensure U.S. dominance in future naval operations and to determine the future trends in these technologies and their impact on Navy and Marine Corps superiority. A vision of future naval operations ensued from this effort. These technologies form the base from which products, platforms, weapons, and capabilities are built. By combining multiple technologies with their future attributes, new systems and subsystems can be envisioned. Technology for the United States Navy and Marine Corps, 2000-2035 Becoming a 21st-Century Force:Volume 2: Technology indentifies those technologies that are unique to the naval forces and whose development the Department of the Navy clearly must fund, as well as commercially dominated technologies that the panel believes the Navy and Marine Corps must learn to adapt as quickly as possible to naval applications. Since the development of many of the critical technologies is becoming global in nature, some consideration is given to foreign capabilities and trends as a way to assess potential adversaries' capabilities. Finally, the panel assessed the current state of the science and technology (S&T) establishment and processes within the Department of the Navy and makes recommendations that would improve the efficiency and effectiveness of this vital area. The panel's findings and recommendations are presented in this report.
Download or read book Broadband RF and Microwave Amplifiers written by Andrei Grebennikov and published by CRC Press. This book was released on 2017-07-12 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadband RF and Microwave Amplifiers provides extensive coverage of broadband radio frequency (RF) and microwave power amplifier design, including well-known historical and recent novel schematic configurations, theoretical approaches, circuit simulation results, and practical implementation strategies. The text begins by introducing two-port networks to illustrate the behavior of linear and nonlinear circuits, explaining the basic principles of power amplifier design, and discussing impedance matching and broadband power amplifier design using lumped and distributed parameters. The book then: Shows how dissipative or lossy gain-compensation-matching circuits can offer an important trade-off between power gain, reflection coefficient, and operating frequency bandwidth Describes the design of broadband RF and microwave amplifiers using real frequency techniques (RFTs), supplying numerous examples based on the MATLAB® programming process Examines Class-E power amplifiers, Doherty amplifiers, low-noise amplifiers, microwave gallium arsenide field-effect transistor (GaAs FET)-distributed amplifiers, and complementary metal-oxide semiconductor (CMOS) amplifiers for ultra-wideband (UWB) applications Broadband RF and Microwave Amplifiers combines theoretical analysis with practical design to create a solid foundation for innovative ideas and circuit design techniques.
Download or read book IEICE Transactions on Electronics written by and published by . This book was released on 2005 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Research of the National Institute of Standards and Technology written by and published by . This book was released on 1997 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microwave De embedding written by Giovanni Crupi and published by Academic Press. This book was released on 2013-11-09 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This groundbreaking book is the first to give an introduction to microwave de-embedding, showing how it is the cornerstone for waveform engineering. The authors of each chapter clearly explain the theoretical concepts, providing a foundation that supports linear and non-linear measurements, modelling and circuit design. Recent developments and future trends in the field are covered throughout, including successful strategies for low-noise and power amplifier design. This book is a must-have for those wishing to understand the full potential of the microwave de-embedding concept to achieve successful results in the areas of measurements, modelling, and design at high frequencies. With this book you will learn: - The theoretical background of high-frequency de-embedding for measurements, modelling, and design - Details on applying the de-embedding concept to the transistor's linear, non-linear, and noise behaviour - The impact of de-embedding on low-noise and power amplifier design - The recent advances and future trends in the field of high-frequency de-embedding - Presents the theory and practice of microwave de-embedding, from the basic principles to recent advances and future trends - Written by experts in the field, all of whom are leading researchers in the area - Each chapter describes theoretical background and gives experimental results and practical applications - Includes forewords by Giovanni Ghione and Stephen Maas
Download or read book Conference Proceedings written by and published by . This book was released on 1996 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Signal written by and published by . This book was released on 1993 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Distributed Power Amplifiers for RF and Microwave Communications written by Narendra Kumar and published by Artech House. This book was released on 2015-06-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new resource presents readers with all relevant information and comprehensive design methodology of wideband amplifiers. This book specifically focuses on distributed amplifiers and their main components, and presents numerous RF and microwave applications including well-known historical and recent architectures, theoretical approaches, circuit simulation, and practical implementation techniques. A great resource for practicing designers and engineers, this book contains numerous well-known and novel practical circuits, architectures, and theoretical approaches with detailed description of their operational principles.
Download or read book The Electrical Engineering Handbook Second Edition written by Richard C. Dorf and published by CRC Press. This book was released on 1997-09-26 with total page 2758 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1993, the first edition of The Electrical Engineering Handbook set a new standard for breadth and depth of coverage in an engineering reference work. Now, this classic has been substantially revised and updated to include the latest information on all the important topics in electrical engineering today. Every electrical engineer should have an opportunity to expand his expertise with this definitive guide. In a single volume, this handbook provides a complete reference to answer the questions encountered by practicing engineers in industry, government, or academia. This well-organized book is divided into 12 major sections that encompass the entire field of electrical engineering, including circuits, signal processing, electronics, electromagnetics, electrical effects and devices, and energy, and the emerging trends in the fields of communications, digital devices, computer engineering, systems, and biomedical engineering. A compendium of physical, chemical, material, and mathematical data completes this comprehensive resource. Every major topic is thoroughly covered and every important concept is defined, described, and illustrated. Conceptually challenging but carefully explained articles are equally valuable to the practicing engineer, researchers, and students. A distinguished advisory board and contributors including many of the leading authors, professors, and researchers in the field today assist noted author and professor Richard Dorf in offering complete coverage of this rapidly expanding field. No other single volume available today offers this combination of broad coverage and depth of exploration of the topics. The Electrical Engineering Handbook will be an invaluable resource for electrical engineers for years to come.
Download or read book Conference Digest written by and published by . This book was released on 1984 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ICCWCS 2019 written by Jamal Zbitou and published by European Alliance for Innovation. This book was released on 2019 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, computer science engineering and telecommunications are two important areas linked and even inseparable. This is obvious for the user who connects the modem of his computer on his mobile phone or telephone line to access, via the global data network, the information available on the servers. The both domains are evolving rapidly and the development of new architectures of systems dedicated to telecommunications and computing becomes essential. Especially, wireless transmission systems with high data rate. Two parts of these systems should be developed software and hardware. Another area that is renewable energies becomes more attractive for researchers in order to develop new conversion systems with good performances, and a good optimization of energy. For example, in wireless sensor systems, we try to develop new protocols permitting to have a good autonomy in terms of energy.
