Download or read book Monolithic Materials written by F. Svec and published by Elsevier. This book was released on 2003-04-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade, monolithic materials in the shape of discs, stacked layers, rolled sheets, sponges, irregular chunks, tubes, and cylinders have all been successfully demonstrated. These formats were prepared from a wide variety of materials including natural polymers such as cellulose, synthetic polymers that involved porous styrene-, methacrylate-, and acrylamide-based polymers, and inorganic materials, mainly silica. Each approach is interesting from the point of view of both preparation and application.Although the current papers and patents concerned with monolithic separation media are quite numerous, the information is scattered throughout a vast number of journals. This book therefore fills the gap in the market for a comprehensive reference book on this subject.Monolithic materials concerns all of the current formats of monolithic materials and provides an integrated view of this novel format of separation media. Since the flow pattern in monolithic devices is different from that in packed beds, the hydrodynamics of the system and mass transport differ considerably from those derived for packed columns. Therefore, this book presents contributions concerned with both flow and mass transfer in the monolithic materials. A significant proportion of the book is devoted to the applications of monolithic materials. It also provides the reader with valuable information about the sources of the specific materials, their properties, and potential applications. · Monolithic materials are currently very popular within several scientific areas such as chromatography, optics, catalysis, diagnostics, genomics, proteomics, and microfluidics.· Provides valuable information about the sources of the specific materials, their properties, and potential applications.· Chapters written by leading experts in the area.
Download or read book Studies on Porous Monolithic Materials Prepared via Sol Gel Processes written by George Hasegawa and published by Springer Science & Business Media. This book was released on 2012-10-03 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis focuses on porous monolithic materials that are not in the forms of particles, fibers, or films. In particular, the synthetic strategy of porous monolithic materials via the sol–gel method accompanied by phase separation, which is characterized as the non-templating method for tailoring well-defined macropores, is described from the basics to actual synthesis. Porous materials are attracting more and more attention in various fields such as electronics, energy storage, catalysis, sensing, adsorbents, biomedical science, and separation science. To date, many efforts have been made to synthesize porous materials in various chemical compositions—organics, inorganics including metals, glasses and ceramics, and organic-inorganic hybrids. Also demonstrated in this thesis are the potential applications of synthesized porous monolithic materials to separation media as well as to electrodes for electric double-layer capacitors (EDLCs) and Li-ion batteries (LIBs). This work is ideal for graduate students in materials science and is also useful to engineers or scientists seeking basic knowledge of porous monolithic materials.
Download or read book Monolithic Silicas in Separation Science written by Klaus K. Unger and published by John Wiley & Sons. This book was released on 2010-11-29 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by the experts and pioneers in the field, this is the first monograph to cover the topic, containing the must-have information hitherto only scattered among journals. Clearly divided into sections on preparation, characterization and modeling, and applications, this is essential reading for chemists, chromatographers, analytical chemists, biochemists and biologists.
Download or read book Ceramic Materials for Energy Applications V written by Josef Matyas and published by John Wiley & Sons. This book was released on 2015-12-23 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Ceramic Engineering and Science Proceeding has been published by The American Ceramic Society since 1980. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Handbook of Smart Materials in Analytical Chemistry written by Miguel de la Guardia and published by John Wiley & Sons. This book was released on 2019-01-24 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to smart materials and how they are used in sample preparation, analytical processes, and applications This comprehensive, two-volume handbook provides detailed information on the present state of new materials tailored for selective sample preparation and the legal frame and environmental side effects of the use of smart materials for sample preparation in analytical chemistry, as well as their use in the analytical processes and applications. It covers both methodological and applied analytical aspects, relating to the development and application of new materials for solid-phase extraction (SPE) and solid-phase microextraction (SPME), their use in the different steps and techniques of the analytical process, and their application in specific fields such as water, food, air, pharmaceuticals, clinical sciences and forensics. Every chapter in Handbook of Smart Materials in Analytical Chemistry is written by experts in the field to provide a comprehensive picture of the present state of this key area of analytical sciences and to summarize current applications and research literature in a critical way. Volume 1 covers New Materials for Sample Preparation and Analysis. Volume 2 handles Analytical Processes and Applications. Focuses on the development and applications of smart materials in analytical chemistry Covers both, methodological and applied analytical aspects, for the development of new materials and their use in the different steps and techniques of the analytical process and their application in specific fields Features applications in key areas including water, air, environment, pharma, food, forensic, and clinical Presents the available tools for the use of new materials suitable to aid recognition process to the sample preparation and analysis A key resource for analytical chemists, applied laboratories, and instrument companies Handbook of Smart Materials in Analytical Chemistry, 2V Set is an excellent reference book for specialists and advanced students in the areas of analytical chemistry, including both research and application environments.
Download or read book Sol Gel Methods for Materials Processing written by Yuriy L. Zub and published by Springer Science & Business Media. This book was released on 2008-07-01 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-gel processing is a soft-chemistry method to obtain functional materials at low temperatures. This route can be used to produce very sophisticated nanomaterials and to tailor the materials to very specific applications. Adsorption and detection of pollutants, water purification and soil remediation represent challenging fields of application that can be exploited by sol-gel materials. In this volume several contributions from invited speakers and participants at the NATO advanced research workshop on "Sol-gel approaches to materials for pollution control, water purification and soil remediation", which has been held in Kiev, Ukraine on October 2007, are reported. The book offers a wide and updated overview of the most advanced sol-gel methods for materials processing and at the same time presents several case studies concerning possible solutions for environmental issues. General articles on sol-gel from the invited speakers and focused research articles allow getting inside sol-gel applications on this very important field.
Download or read book Multicomponent Polymeric Materials written by Jin Kuk Kim and published by Springer. This book was released on 2016-08-26 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers an in-depth review of the materials design and manufacturing processes employed in the development of multi-component or multiphase polymer material systems. This field has seen rapid growth in both academic and industrial research, as multiphase materials are increasingly replacing traditional single-component materials in commercial applications. Many obstacles can be overcome by processing and using multiphase materials in automobile, construction, aerospace, food processing, and other chemical industry applications. The comprehensive description of the processing, characterization, and application of multiphase materials presented in this book offers a world of new ideas and potential technological advantages for academics, researchers, students, and industrial manufacturers from diverse fields including rubber engineering, polymer chemistry, materials processing and chemical science. From the commercial point of view it will be of great value to those involved in processing, optimizing and manufacturing new materials for novel end-use applications. The book takes a detailed approach to the description of process parameters, process optimization, mold design, and other core manufacturing information. Details of injection, extrusion, and compression molding processes have been provided based on the most recent advances in the field. Over two comprehensive sections the book covers the entire field of multiphase polymer materials, from a detailed description of material design and processing to the cutting-edge applications of such multiphase materials. It provides both precise guidelines and general concepts for the present and future leaders in academic and industrial sectors.
Download or read book Materials Science and Engineering written by William D. Callister and published by John Wiley & Sons. This book was released on 2019-01-03 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Electromagnetic Materials written by P. S. Neelakanta and published by CRC Press. This book was released on 1995-06-27 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook explains basic concepts underlying electromagnetic properties of materials, addresses ways of deploying them in modern applications, and supplies pertinent data compiled for the first time in a single volume. Examples, including tables, charts, and graphs, are furnished from a practical applications view point of electromagnetic materials in various fields. These applications have grown enormously in recent years, pertinent to electromagnetic shields, radar absorbing materials, bioelectromagnetic phantoms, smart materials, electromagnetically active surfaces, exotic magnets, application-specific electrodes, and ferrites, etc.
Download or read book Monolithic Chromatography and Its Modern Applications written by Perry G. Wang and published by ILM Publications. This book was released on 2010 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title describes monolithic chromatography and its applications in the analytical field.
Download or read book Bridging the Centuries with SAMPE s Materials and Processes Technology written by Steve Loud and published by Taylor & Francis. This book was released on 2000 with total page 2381 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Materials Selection written by Myer Kutz and published by John Wiley & Sons. This book was released on 2002-07-22 with total page 1524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erstmals in einem Band werden Werkstoffe hier (in zwei getrennten Systemen) sowohl nach ihrer technischen Anwendung als auch nach ihren Eigenschaften geordnet. - Benutzer können deshalb zunächst nach der Gruppe von Materialen suchen, die für eine spezielle Anwendung geeignet sind, und anschließend Details über jedes einzelne Material finden - Suchkriterien sind Eigenschaften wie Wärmeleitfähigkeit, optisches Reflexionsvermögen, Elastizität usw. und Anwendungsgebiete wie Bauwesen, Biomedizin, Fahrzeugbau, Luftfahrttechnik, Elektrotechnik usw. - berücksichtigt werden sowohl herkömmliche Werkstoffe (Eisen- und Nichteisenmetalle, Kunststoffe, Klebstoffe) als auch Kompositwerkstoffe und synthetische Materialen wie Laminate, Fasern und Keramiken
Download or read book The Behavior of Structures Composed of Composite Materials written by Jack R. Vinson and published by Springer. This book was released on 2006-04-11 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite structures and products have developed tremendously since the publication of the first edition of this work in 1986. This new edition of the now classic 1986 text has been written to educate the engineering reader in the various aspects of mechanics for using composite materials in the design and analysis of composite structures and products. Areas dealt with include manufacture, micromechanical properties, structural design, joints and bonding and a much needed introduction to composite design philosophy. Each chapter is concluded by numerous problems suitable for home assignments or examination. A solution guide is available on request from the authors.
Download or read book Proceedings of the TMS Middle East Mediterranean Materials Congress on Energy and Infrastructure Systems MEMA 2015 written by Ibrahim Karaman and published by Springer. This book was released on 2016-12-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at The TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015), a conference organized by The Minerals, Metals & Materials Society (TMS) and held in Doha, Qatar. The event focused on new materials research and development in applications of interest for Qatar and the entire Middle East and Mediterranean region. The papers in this collection are divided into five sections: (1) Sustainable Infrastructure Materials; (2) Computational Materials Design; (3) Materials for Energy Conversion and Storage; (4) Lightweight and High Performance Materials; and (5) Materials for Energy Extraction and Storage: Shape Memory Alloys.
Download or read book Nanostructure Control of Materials written by R H J Hannink and published by Taylor & Francis US. This book was released on 2006-02-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Nanotechnology is an area of science and technology where dimensions and tolerances in the range of 0.1 nm to 100nm play a critical role. Nanotechnology has opened up new worlds of opportunity. It encompasses precision engineering as well as electronics, electromechanical systems and mainstream biomedical applications in areas as diverse as gene therapy, drug delivery and novel drug discovery techniques. Nanostructured materials present exciting opportunities for manipulating structure and properties on the nanometer scale. The ability to engineer novel structures at the molecular level has led to unprecedented opportunities for materials design. This new book provides detailed insights into the synthesis/structure and property relationships of nanostructured materials. A valuable book for materials scientists, mechanical and electronic engineers and medical researchers. CONTENTS Special properties resulting from nanodimensionality; Nanoparticle technologies; Control of molecular assemblies; Functional organic inorganic nanocomposites; Molecular modelling of nanomorphology in polymers; Nanodimensionality and ionic transport; Multi scale simulation of nanionic polymer systems; Nanoengineering in metallic systems; Characterisation of nanometallic systems with NMR; Mechanical behaviour of metallic nanolaminates; Mechanics of nanocomposite structures; Preparation, properties and performance of Nanocrystalline ceramics; Novel properties from nanoceramics; Hydrogen storage in nanostructured materials; Nanofabrication.
Download or read book Ceramic Catalysts written by Manju Kurian and published by Elsevier. This book was released on 2023-04-27 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Catalysts: Materials, Strategies and Applications focuses on synthesis techniques and applications of ceramic materials in heterogenous catalysis. In order to enable an affordable, sustainable, low-carbon economy, research activities have been intensified in this area over recent years. The rapid accumulation of results has been evaluated and summarized by recognized experts working in their respective fields in the form of separate and complementary chapters. The first part of the book is dedicated to synthesis and catalytic applications of different categories of ceramics that include both porous ceramics and ceramic composites. Catalytic applications of ceramics mainly involving waste-water treatment, combustion reactions, and fine chemical synthesis are also discussed. Use of ceramics as catalyst supports is also given importance in the book. The book is intended to act as a valuable reference resource for both researchers and postgraduate students with key emphasis on the following areas of research: Recent techniques for the synthesis of different ceramics; specific characteristics of each type of ceramics for catalytic applications; different types of catalyzed reactions based on inherent chemical characteristics and sustainable technologies based on ceramic catalysts.The book will be an essential reference resource for industrial and academic researchers, materials scientists, chemists, and environmental scientists. Provides an extensive overview of ceramic materials involved in catalysis Presents the current state of art as tremendous progress has been achieved over recent years Contributors are at the forefront of research Provides an evaluation and comparison of the different types of ceramic materials available, including structure, properties and performance
Download or read book Joining of Materials and Structures written by Robert W. Messler and published by Elsevier. This book was released on 2004-08-24 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joining of Materials and Structures is the first and only complete and highly readable treatment of the options for joining conventional materials and the structures they comprise in conventional and unconventional ways, and for joining emerging materials and structures in novel ways. Joining by mechanical fasteners, integral designed-or formed-in features, adhesives, welding, brazing, soldering, thermal spraying, and hybrid processes are addressed as processes and technologies, as are issues associated with the joining of metals, ceramics (including cement and concrete) glass, plastics, and composites (including wood), as well as, for the first time anywhere, living tissue. While focused on materials issues, issues related to joint design, production processing, quality assurance, process economics, and joint performance in service are not ignored. The book is written for engineers, from an in-training student to a seasoned practitioner by an engineer who chose to teach after years of practice. By reading and referring to this book, the solutions to joining problems will be within one’s grasp.Key Features:· Unprecedented coverage of all joining options (from lashings to lasers) in 10 chapters· Uniquely complete coverage of all materials, including living tissues, in 6 chapters· Richly illustrated with 76 photographs and 233 illustrations or plots· Practice Questions and Problems for use as a text of for reviewing to aid for comprehension * Coverage all of major joining technologies, including welding, soldering, brazing, adhesive and cement bonding, pressure fusion, riveting, bolting, snap-fits, and more* Organized by both joining techniques and materials types, including metals, non-metals, ceramics and glasses, composites, biomaterials, and living tissue* An ideal reference for design engineers, students, package and product designers, manufacturers, machinists, materials scientists
