Download or read book Monodisperse Highly Ordered and Polydisperse Biobased Solid Foams written by Sébastien Andrieux and published by Springer Nature. This book was released on 2019-08-23 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the synthesis of chitosan-based solid foams using foam templating. Solid foams with pore sizes between a few micrometres and a few millimetres are widely used in a range of established and emerging applications, including filtration, catalysis, sound and thermal insulation, human protection, and tissue engineering. They are lightweight with large surface-to-volume ratios, and have excellent mechanical, acoustic, and thermal properties. However, most foaming processes are extremely complex, and there remains a lack of sound scientific understanding of—and therefore control over—the parameters that determine the properties of the material. One route towards tailor-made solid foams is liquid foam templating, where the liquid foam is generated first (with the desired structure) before being solidified into a solid foam with the desired structure. This book describes how liquid foam templating can be used to synthesise monodisperse solid foams as well as solid foams with a tuneable polydispersity.

Download or read book Photonic Band Gap Materials written by C.M. Soukoulis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photonic band gap crystals offer unique ways to tailor light and the propagation of electromagnetic waves. In analogy to electrons in a crystal, EM waves propagating in a structure with a periodically-modulated dielectric constant are organized into photonic bands separated by gaps in which propagating states are forbidden. Proposed applications of such photonic band gap crystals, operating at frequencies from microwave to optical, include zero- threshold lasers, low-loss resonators and cavities, and efficient microwave antennas. Spontaneous emission is suppressed for photons in the photonic band gap, offering novel approaches to manipulating the EM field and creating high-efficiency light-emitting structures. Photonic Band Gap Materials identifies three most promising areas of research. The first is materials fabrication, involving the creation of high quality, low loss, periodic dielectric structures. The smallest photonic crystals yet fabricated have been made by machining Si wafers along (110), and some have lattice constants as small as 500 microns. The second area is in applications. Possible applications presented are microwave mirrors, directional antennas, resonators (especially in the 2 GHz region), filters, waveguides, Y splitters, and resonant microcavities. The third area covers fundamentally new physical phenomena in condensed matter physics and quantum optics. An excellent review of recent development, covering theoretical, experimental and applied aspects. Interesting and stimulating reading for active researchers, as well as a useful reference for non-specialists.

Download or read book Theory of Electrophoresis and Diffusiophoresis of Highly Charged Colloidal Particles written by Eric Lee and published by Academic Press. This book was released on 2018-11-30 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of Electrophoresis and Diffusiophoresis of Highly Charged Colloidal Particles discusses the electrophoretic and diffusiophoretic motions of various colloidal entities, such as rigid particles, liquid droplets, gas bubbles, and porous particles, focusing on the motion-deterring double-layer polarization effect pertinent to highly charged particles, with the lowly charged ones serving as the limiting cases. Boundary effects such as those from a cylindrical pore, a solid plane, or an air-water interface are analyzed as well for the electrophoretic motion of the various particles considered. Dynamic electrophoresis is also explored and treated.The contents are suitable for researchers, graduate students, or senior college students with some basic background of colloid science and transport phenomena. As there is no closed-form analytical formula in general for the situation of highly charged particles, the results are presented with extensive figures and plots as well as tables under various electrokinetic situations of interest to facilitate the possible use of interested readers. - Provides a reliable quantitative prediction of highly charged particles motion with easy-to-apply charts and in-depth understanding of the underlying mechanisms - Offers an extensive treatment of direct quantitative predication for non-rigid systems, such as porous particles, liquid drops, and gels, which is especially valuable in proteins and DNA research - Discusses highly charged systems with a nearby boundary of practical interests, such as a pore, a solid plane, or an air-water interface, which is of vital interest in fields such as microfluidic operations and biomedical engineering - Affords special attention to the polarization effect

Download or read book Porous Polymers written by Michael S. Silverstein and published by John Wiley & Sons. This book was released on 2011-04-19 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the various aspects of the porous polymer field into one volume. It not only presents a fundamental description of the field, but also describes the state of the art for such materials and provides a glimpse into the future. Emphasizing a different aspect of the ongoing research and development in porous polymers, the book is divided into three sections: Synthesis, Characterization, and Applications. The first part of each chapter presents the basic scientific and engineering principles underlying the topic, while the second part presents the state of the art results based on those principles. In this fashion, the book connects and integrates topics from seemingly disparate fields, each of which embodies different aspects inherent in the diverse field of porous polymeric materials.

Download or read book Introduction to Industrial Polypropylene written by Dennis B. Malpass and published by John Wiley & Sons. This book was released on 2012-07-02 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory text is an important resource for new engineers, chemists, students, and chemical industry personnel to understand the technical aspects of polypropylene which is the 2nd largest synthetics polymer in manufactured output. The book considers the following topics: What are the principal types of polypropylene and how do they differ? What catalysts are used to produce polypropylene and how do they function? What is the role of cocatalysts and how have they evolved over the years? How are industrial polypropylene catalysts tested and the resultant polymer evaluated? What processes are used in the manufacture of polypropylene? What are the biopolymer alternatives to polypropylene? What companies are the major industrial manufacturers of polypropylene? What is the environmental fate of polypropylene?

Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.

Download or read book Natural Chelating Polymers written by Riccardo A. A. Muzzarelli and published by Pergamon. This book was released on 1973 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.

Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.

Download or read book Rheology and Non Newtonian Fluids written by Fridtjov Irgens and published by Springer Science & Business Media. This book was released on 2013-07-25 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a brief but thorough introduction to the fascinating subject of non-Newtonian fluids, their behavior and mechanical properties. After a brief introduction of what characterizes non-Newtonian fluids in Chapter 1 some phenomena characteristic of non-Newtonian fluids are presented in Chapter 2. The basic equations in fluid mechanics are discussed in Chapter 3. Deformation kinematics, the kinematics of shear flows, viscometric flows, and extensional flows are the topics in Chapter 4. Material functions characterizing the behavior of fluids in special flows are defined in Chapter 5. Generalized Newtonian fluids are the most common types of non-Newtonian fluids and are the subject in Chapter 6. Some linearly viscoelastic fluid models are presented in Chapter 7. In Chapter 8 the concept of tensors is utilized and advanced fluid models are introduced. The book is concluded with a variety of 26 problems. Solutions to the problems are ready for instructors

Download or read book Eco Friendly Adhesives for Wood and Natural Fiber Composites written by Mohammad Jawaid and published by Springer Nature. This book was released on 2021-01-21 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of eco-friendly resins and their composite materials covering their synthesis, sources, structures and properties for different industrial applications to support the ongoing research and development in eco-friendly and renewable commercial products. It provides comparative discussions on the properties of eco-friendly resins with other polymer composites. It is a useful reference on bio-based eco-friendly polymer resins, wood-based composites, natural fibers and biomass materials for the polymer scientists, engineers and material scientists.

Download or read book Colloidal Particles at Liquid Interfaces written by Bernard P. Binks and published by Cambridge University Press. This book was released on 2006-08-17 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The understanding of how small solid particles operate at liquid interfaces is minimal. This book brings together the topics actively being investigated, with contributions from experts in the field. It will be of interest to researchers in chemistry, physics, chemical engineering, pharmacy, food science and materials science.

Download or read book Cellulose Chemistry and Properties Fibers Nanocelluloses and Advanced Materials written by Orlando J. Rojas and published by Springer. This book was released on 2016-02-25 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vincent Bulone et al.: Cellulose sources and new understanding of synthesis in plants Thomas Heinze et al.:Cellulose structure and properties Thomas Rosenau, Antje Potthast, Ute Henniges et al.: Recent developments in cellulose aging (degradation / yellowing / chromophore formation) Sunkyu Park et al.:Cellulose crystallinity Lina Zhang et al.:Gelation and dissolution behavior of cellulose Yoshiyuki Nishio et al.:Cellulose and derivatives in liquid crystals Alessandro Gandini, Naceur Belgacem et al.:The surface and in-depth modification of cellulose fibers Emily D. Cranston et al.:Interfacial properties of cellulose Herbert Sixta, Michael Hummel et al.Cellulose Fibers Regenerated from Cellulose Solutions in Ionic Liquids Qi Zhou et al.:Cellulose-based biocomposites Orlando Rojas et al.:Films of cellulose nanocrystals and nanofibrils Pedro Fardim et al.:Functional cellulose particles Wadood Hamad et al.:Cellulose Composites

Download or read book Metal Nanoparticles in Microbiology written by Mahendra Rai and published by Springer Science & Business Media. This book was released on 2011-04-02 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following an introduction to biogenic metal nanoparticles, this book presents how they can be biosynthesized using bacteria, fungi and yeast, as well as their potential applications in biomedicine. It is shown that the synthesis of nanoparticles using microbes is eco-friendly and results in reproducible metal nanoparticles of well-defined sizes, shapes and structures. This biotechnological approach based on the process of biomineralization exploits the effectiveness and flexibility of biological systems. Chapters include practical protocols for microbial synthesis of nanoparticles and microbial screening methods for isolating a specific nanoparticle producer as well as reviews on process optimization, industrial scale production, biomolecule-nanoparticle interactions, magnetosomes, silver nanoparticles and their numerous applications in medicine, and the application of gold nanoparticles in developing sensitive biosensors.

Download or read book Nanoemulsions written by Seid Mahdi Jafari and published by Academic Press. This book was released on 2018-02-24 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoemulsions: Formulation, Applications, and Characterization provides detailed information on the production, application and characterization of food nanoemulsion as presented by experts who share a wealth of experience. Those involved in the nutraceutical, pharmaceutical and cosmetic industries will find this a useful reference as it addresses findings related to different preparation and formulation methods of nanoemulsions and their application in different fields and products. As the last decade has seen a major shift from conventional emulsification processes towards nanoemulsions that both increase the efficiency and stability of emulsions and improve targeted drug and nutraceutical delivery, this book is a timely resource. - Summarizes general aspects of food nanoemulsions and their formulation - Provides detailed information on the production, application, and characterization of food nanoemulsion - Reveals the potential of nanoemulsions, as well as their novel applications in functional foods, nutraceutical products, delivery systems, and cosmetic formulations - Explains preparation of nanoemulsions by both low- and high-energy methods

Download or read book Polymeric Foams written by Shau-Tarng Lee and published by CRC Press. This book was released on 2004-05-27 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the inaugural volume a series entitled Polymeric Foams: Technology and Applications. Generally, thermoplastic and thermoset foams have been treated as two separate practices in industry. Polymeric Foams: Mechanisms and Materials presents the basics of foaming in general build a strong foundation to those working in both thermoplastic a

Download or read book Nanoengineering written by Patricia I. Dolez and published by Elsevier. This book was released on 2015-05-26 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoengineering: Global Approaches to Health and Safety Issues provides a global vision on the impact of engineered nanomaterials both for the consumer/general public and in occupational settings. The book also presents a hint on what can be expected for the future from nanomaterials and their effects on our lives, both at home and at work. In addition, users will find valuable information on nanomaterials' irreplaceable value and their risks for health, safety, and environmental issues. Case studies illustrate key points and provide information on important processes. - Provides a global vision on the different aspects related to nanosafety and a synthesis of the information available - Gives all the information required for precision decision-making in a single book, offering both general public and occupational aspects - Contains separate chapters on each subject written by world-renowned contributors - Presents a complete vision of the problem, with perspectives on global approaches - Includes case studies that illustrate important processes

Download or read book Nano Antimicrobials written by Nicola Cioffi and published by Springer Science & Business Media. This book was released on 2012-02-26 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a high demand for antimicrobials for the treatment of new and emerging microbial diseases. In particular, microbes developing multidrug resistance have created a pressing need to search for a new generation of antimicrobial agents, which are effective, safe and can be used for the cure of multidrug-resistant microbial infections. Nano-antimicrobials offer effective solutions for these challenges; the details of these new technologies are presented here. The book includes chapters by an international team of experts. Chemical, physical, electrochemical, photochemical and mechanical methods of synthesis are covered. Moreover, biological synthesis using microbes, an option that is both eco-friendly and economically viable, is presented. The antimicrobial potential of different nanoparticles is also covered, bioactivity mechanisms are elaborated on, and several applications are reviewed in separate sections. Lastly, the toxicology of nano-antimicrobials is briefly assessed.