Download or read book Monitoring of the BTA Deep Hole Drilling Process Using Residual Control Charts written by Franz Hering and published by . This book was released on 2004 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deep hole drilling methods are used for producing holes with a high lengthto- diameter ratio, good surface finish and straightness. The process is subject to dynamic disturbances usually classified as either chatter vibration or spiralling. In this work, we propose to monitor the BTA drilling process using control charts to detect chatter as early as possible and to secure production with high quality. These control charts use the residuals obtained from a model which describes the variation in the amplitude of the relevant frequencies of the process. The results showed that chatter is detected and some alarm signals are related to changing physical conditions of the process.

Download or read book Application and Use of Multivariate Control Charts in a BTA Deep Hole Drilling Process written by Franz Hering and published by . This book was released on 2004 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Application and Use of Multivariate Control Charts in a BTA Deep Hole Drilling Process written by and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Classification the Ubiquitous Challenge written by Claus Weihs and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions in this volume represent the latest research results in the field of Classification, Clustering, and Data Analysis. Besides the theoretical analysis, papers focus on various application fields as Archaeology, Astronomy, Bio-Sciences, Business, Electronic Data and Web, Finance and Insurance, Library Science and Linguistics, Marketing, Music Science, and Quality Assurance.

Download or read book Statistics Dynamics and Quality written by Winfried Theis and published by . This book was released on 2004 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control of Whirling Vibrations in BTA Deep Hole Boring Process Using Fuzzy Logic Modeling and Active Suppression Technique written by Hussien Al-Wedyan and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Need for increased productivity has motivated interest in drilling equipment for high speed and high precision drilling. However, long drills exhibit aggressive and self-excited vibrations known as whirling motions. These vibrations deteriorate the outcome drilled surface qualities, i.e., finish, geometrical dimensioning and tolerances. Deep hole boring is the most complex and expensive drilling operation in terms of expertise needed, operating conditions and size. The present research is to study the whirling vibrations of the boring bar workpiece system in the BTA deep hole boring process. After a review of the literature, a set of objectives is outlined for the thesis. The objectives are to formulate an analytical model, which will include the self-excited motion caused by the internal cutting forces in the Z and Y directions and the active suppression forces used to counteract the cutting forces. This model will be used to carry out simulation studies on the whirling vibrations of the boring bar-workpiece system and to carry out some experiments in order to validate the analytical model. In view of the large number of machining parameters that influence the system dynamics and the resulting surface finish, geometrical dimensioning and tolerancing on the workpiece, a fuzzy logic model is proposed for off line modeling. Such a model will be used to examine the results obtained in the experiments and to predict the best parametric combinations that will provide the required surface finish. This will constitute an open loop control of the vibrations. An active vibration suppression is carried out to reduce the whirling motion of the boring bar-workpiece system, which in turn will improve the surface finish. Two electrodynamic shakers are used in Z-Y plane to overcome the displacement of the boring bar while drilling. The experimental investigations are carried out in the deep hole boring laboratory. Instrumentation involving proximity pickups, oscillator, amplifiers and demodulator are used to measure the displacement response and the orbital motion of the boring bar-workpiece system, and two electrodynamic shakers to suppress the motion. The surface roughness, straightness and circularity are measured which are related to the whirling vibrations and the machining parameters.

Download or read book Applied Science Technology Index written by and published by . This book was released on 1996 with total page 1618 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cutting Tool Technology written by Graham T. Smith and published by Springer Science & Business Media. This book was released on 2008-07-03 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is a well acknowledged fact that virtually all of our modern-day components and assemblies rely to some extent on machining operations in their manufacturing process. Thus, there is clearly a substantive machining requirement which will continue to be of prime importance for the foreseeable future. Cutting Tool Technology provides a comprehensive guide to the latest developments in the use of cutting tool technology. The book covers new machining and tooling topics such as high-speed and hard-part machining, near-dry and dry-machining strategies, multi-functional tooling, ‘diamond-like’ and ‘atomically-modified’ coatings, plus many others. Also covered are subjects important from a research perspective, such as micro-machining and artificial intelligence coupled to neural network tool condition monitoring. A practical handbook complete with troubleshooting tables for common problems, Cutting Tool Technology is an invaluable reference for researchers, manufacturers and users of cutting tools.

Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.

Download or read book Surface Integrity in Machining written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2010-01-10 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Surface Integrity in Machining" describes the fundamentals and recent advances in the study of surface integrity in machining processes. "Surface Integrity in Machining" gathers together research from international experts in the field. Topics covered include: the definition of surface integrity and its importance in functional performance; surface topography characterization and evaluation; microstructure modification and the mechanical properties of subsurface layers; residual stresses; surface integrity characterization methods; and surface integrity aspects in machining processes. A useful reference for researchers in tribology and materials, mechanical and materials engineers, and machining professionals, "Surface Integrity in Machining" can be also used as a textbook by advanced undergraduate and postgraduate students.

Download or read book Design of Experiments in Production Engineering written by J. Paulo Davim and published by Springer. This book was released on 2015-11-06 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers design of experiments (DoE) applied in production engineering as a combination of manufacturing technology with applied management science. It presents recent research advances and applications of design experiments in production engineering and the chapters cover metal cutting tools, soft computing for modelling and optmization of machining, waterjet machining of high performance ceramics, among others.

Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2018-09-03 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.

Download or read book Integrated Solid Waste Management A Lifecycle Inventory written by P.R. White and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life is often considered to be a journey. The lifecycle of waste can similarly be considered to be a journey from the cradle (when an item becomes valueless and, usually, is placed in the dustbin) to the grave (when value is restored by creating usable material or energy; or the waste is transformed into emissions to water or air, or into inert material placed in a landfill). This preface provides a route map for the journey the reader of this book will undertake. Who? Who are the intended readers of this book? Waste managers (whether in public service or private companies) will find a holistic approach for improving the environmental quality and the economic cost of managing waste. The book contains general principles based on cutting edge experience being developed across Europe. Detailed data and a computer model will enable operations managers to develop data-based improvements to their systems. Producers oj waste will be better able to understand how their actions can influence the operation of environmentally improved waste management systems. Designers oj products and packages will be better able to understand how their design criteria can improve the compatibility of their product or package with developing, environmentally improved waste management systems. Waste data specialists (whether in laboratories, consultancies or environ mental managers of waste facilities) will see how the scope, quantity and quality of their data can be improved to help their colleagues design more effective waste management systems.

Download or read book Advanced Surface Enhancement written by Sho Itoh and published by Springer Nature. This book was released on 2019-08-30 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the first INCASE conference, organised by ARTC at A*STAR, Singapore. It provides a comprehensive review of recent advances in surface enhancement processes and strategies employed to assess their impact on materials properties and performance. As cyber-physical systems are becoming more and more relevant in manufacturing, it focuses on assessing the readiness of current technologies for future transformations, such as Industry 4.0, identifying the opportunities and challenges, and exploring ways to address them. Written by researchers, practising engineering and industry experts, the book bridges the gap between research and manufacturing, promoting technology adoption in industry and innovative ideas to prepare it for the future.

Download or read book Banking in Africa Delivering on Financial Inclusion Supporting Financial Stability written by European Investment Bank and published by European Investment Bank. This book was released on 2018-11-21 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: In its fourth edition, this report focuses on recent developments in Africa's banking sectors and the policy options for all stakeholders. The study of banking sectors across all African sub-regions includes the results of the EIB survey of banking groups operating in Africa. Three thematic chapters address challenges and opportunities for financing investment in Africa: Crowding out of private sector lending by public debt issuance The state of bank recovery and resolution laws in Africa Policy options on how to finance infrastructure development. The report finds that in many African banking markets, the last two years saw a pause in financial deepening. However, a rising share of banking groups report improving market conditions and plan a structural expansion of their operations in Africa and a continued push for new technologies.

Download or read book Science and Conservation for Museum Collection written by Bruno Fabbri and published by Nardini Editore. This book was released on 2017-06-06 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of the book “Science and Conservation for Museum Collections” was born as a result of the experience made by CNR-ISTEC (Faenza) in the implementation of a course for Syrian restorers at the National Museum in Damascus. The book takes into consideration archaeological artefacts made out of the most common materials, like stones (both natural and artificial), mosaics, ceramics, glass, metals, wood and textiles, together with less diffuse artefacts and materials, like clay tablets, goldsmith artefacts, icons, leather and skin objects, bones and ivory, coral and mother of pearl. Each type of material is treated from four different points of view: composition and processing technology; alteration and degradation causes and mechanisms; procedures for conservative intervention; case studies and/or examples of conservation and restoration. Due to the high number of materials and to the great difference between their conservation problems, all the subjects are treated in a schematic, but precise and complete way. The book is mainly addressed to students, young restorers, conservators and conservation scientists all around the world. But the book can be usefully read by expert professionals too, because nobody can know everything and the experts often need to learn something of the materials not included in their specific knowledge. Twenty- two experts in very different fields of activity contributed with their experience for obtaining a good product. All they are Italian experts, or working in Italy, so that the book can be seen as an exemplification on how the conservation problem of Cultural Heritage is received and tackled in Italy. —————————————————— SCIENCE AND CONSERVATION FOR MUSEUM COLLECTIONS INTRODUCTION 1 – PREVENTIVE CONSERVATION 1.1 Introduction 1.2 International standards and guidelines 1.3 Environment-material interaction 1.4 Microclimate and monitoring 1.5 Handling works of art 1.6 Exhibition criteria 1.7 MUSA project: intermuseum network for conservation of artistic heritage Bibliography Acknowledgements 2 – STONE ARTEFACTS 2.1 What conservation means 2.2 Natural Stones 2.3 Artificial stones 2.4 Deterioration of the stone 2.5 Cleaning of stone artefacts 2.6 Consolidation and Protection 2.7 Case studies Bibliography 3 – MOSAICS 3.1 Manufacturing techniques 3.2 History of the mosaic 3.3 Degradation of mosaic 3.4 Restoration of mosaics 3.5 Case study Bibliography 4 – CERAMICS 4.1 Ceramic technology 4.2 Technological classification of ceramics 4.3 Alteration and degradation processes 4.4 Ceramic conservation and restoration 4.5 Case studies 4.6 Examples of restoration Bibliography Acknowledgements 5 – CLAY TABLETS 5.1 Defnition 5.2 Deterioration 5.3 Conservative intervention 5.4 Case study: Syrian tablets Bibliography Acknowledgements 6 – GLASS 6.1 General information 6.2 Processing techniques 6.3 Glass deterioration 6.4 Glass conservation and restoration 6.5 Case studies Bibliography Acknowledgements 7 – METALS 7.1 Origin of metals 7.2 Manufacturing techniques 7.3 Conservation state of metals 7.4 Conservative intervention for metals 7.5 Case studies: Recovery of metallic artefacts from terracotta containers Bibliography Acknowledgements 8 – GOLDSMITH ARTEFACTS 8.1 Goldsmith’s metals 8.2 Enamels 8.3 Precious stones 8.4 Alteration and degradation 8.5 Conservative intervention 8.6 Case studies Bibliography 9 – WOOD ARTEFACTS 9.1 Characteristics of the wood 9.2 Working techniques 9.3 Degradation of wood 9.4 How to start restoring 9.5 Restoration of a small inlaid table 9.6 Restoration of a commemorating wooden tablet 9.7 The restoration of a seventeenth-century wooden crucifix Bibliography 10 – ICONS 10.1 The construction of icons 10.2 Degradation and damages of icons 10.3 Methods of conservation and restoration of icons 10.4 Examples of conservative interventions Bibliography 11 – TEXTILE FINDS 11.1 Morphology, characteristics and properties of textiles 11.2 Decay of textile fibres 11.3 Conservation treatments of archaeological textiles 11.4 Conservation practice: two case histories Bibliography Acknowledgements 12 – LEATHER AND ANIMAL SKIN OBJECTS 12.1 Introduction 12.2 Skin 12.3 The tanning process 12.4 Parchment 12.5 Leather degradation 12.6 Conservative intervention 12.7 Examples of conservative interventions Bibliography 13 – INORGANIC MATERIALS OF ORGANIC ORIGIN 13.1 The materials 13.2 The restoration operations 13.3 Cases of study Bibliography Acknowledgements 14 – ANALYTICAL TECHNIQUES 14.1 General information 14.2 Optical microscopy 14.3 Spectroscopic techniques 14.4 Radiochemical techniques 14.5 Chromatography 14.6 Electron microscopy 14.7 Thermal analyses 14.8 Open porosity measurements 14.9 Analysis of microbial colonization Bibliography Acknowledgements

Download or read book Cognitive Social Mining Applications in Data Analytics and Forensics written by Haldorai, Anandakumar and published by IGI Global. This book was released on 2018-12-14 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, there has been a rapid increase in interest regarding social network analysis in the data mining community. Cognitive radios are expected to play a major role in meeting this exploding traffic demand on social networks due to their ability to sense the environment, analyze outdoor parameters, and then make decisions for dynamic time, frequency, space, resource allocation, and management to improve the utilization of mining the social data. Cognitive Social Mining Applications in Data Analytics and Forensics is an essential reference source that reviews cognitive radio concepts and examines their applications to social mining using a machine learning approach so that an adaptive and intelligent mining is achieved. Featuring research on topics such as data mining, real-time ubiquitous social mining services, and cognitive computing, this book is ideally designed for social network analysts, researchers, academicians, and industry professionals.