Download or read book Monitoring Fluid Injection Using Seismic Time lapse Analysis written by Hannah Ng and published by . This book was released on 2005 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Applications of Time lapse Seismic Data written by David H. Johnston and published by SEG Books. This book was released on 2013 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time-lapse (4D) seismic technology is a key enabler for improved hydrocarbon recovery and more cost-effective field operations. This book shows how 4D data are used for reservoir surveillance, add value to reservoir management, and provide valuable insight on dynamic reservoir properties such as fluid saturation, pressure, and temperature.
Download or read book Time Lapse Approach to Monitoring Oil Gas and CO2 Storage by Seismic Methods written by Junzo Kasahara and published by Gulf Professional Publishing. This book was released on 2016-10-14 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time Lapse Approach to Monitoring Oil, Gas, and CO2 Storage by Seismic Methods delivers a new technology to geoscientists, well logging experts, and reservoir engineers, giving them a new basis on which to influence decisions on oil and gas reservoir management. Named ACROSS (Accurately Controlled and Routinely Operated Signal System), this new evaluation method is presented to address more complex reservoirs, such as shale and heavy oil. The book also discusses prolonged production methods for enhanced oil recovery. The monitoring of storage zones for carbon capture are also included, all helping the petroleum and reservoir engineer to fully extend the life of a field and locate untapped pockets of additional oil and gas resources. Rounded out with case studies from locations such as Japan, Saudi Arabia, and Canada, this book will help readers, scientists, and engineers alike to better manage the life of their oil and gas resources and reservoirs. - Benefits both geoscientists and reservoir engineers to optimize complex reservoirs such as shale and heavy oil - Explains a more accurate and cost efficient reservoir monitoring technology called ACROSS (Accurately Controlled and Routinely Operated Signal System) - Illustrates real-world application through multiple case studies from around the world
Download or read book Time lapse Seismic Monitoring of Subsurface Fluid Flow written by Sung H. Yuh and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Time-lapse seismic monitoring repeats 3D seismic imaging over a reservoir to map fluid movements in a reservoir. During hydrocarbon production, the fluid saturation, pressure, and temperature of a reservoir change, thereby altering the acoustic properties of the reservoir. Time-lapse seismic analysis can illuminate these dynamic changes of reservoir properties, and therefore has strong potential for improving reservoir management. However, the response of a reservoir depends on many parameters and can be diffcult to understand and predict. Numerical modeling results integrating streamline fluid flow simulation, rock physics, and ray-Born seismic modeling address some of these problems. Calculations show that the sensitivity of amplitude changes to porosity depend on the type of sediment comprising the reservoir. For consolidated rock, high-porosity models show larger amplitude changes than low porosity models. However, in an unconsolidated formation, there is less consistent correlation between amplitude and porosity. The rapid time-lapse modeling schemes also allow statistical analysis of the uncertainty in seismic response associated with poorly known values of reservoir parameters such as permeability and dry bulk modulus. Results show that for permeability, the maximum uncertainties in time-lapse seismic signals occur at the water front, where saturation is most variable. For the dry bulk-modulus, the uncertainty is greatest near the injection well, where the maximum saturation changes occur. Time-lapse seismic methods can also be applied to monitor CO2 sequestration. Simulations show that since the acoustic properties of CO2 are very different from those of hydrocarbons and water, it is possible to image CO2 saturation using seismic monitoring. Furthermore, amplitude changes after supercritical fluid CO2 injection are larger than liquid CO2 injection. Two seismic surveys over Teal South Field, Eugene Island, Gulf of Mexico, were acquired at different times, and the numerical models provide important insights to understand changes in the reservoir. 4D seismic differences after cross-equalization show that amplitude dimming occurs in the northeast and brightening occurs in the southwest part of the field. Our forward model, which integrates production data, petrophysicals, and seismic wave propagation simulation, shows that the amplitude dimming and brightening can be explained by pore pressure drops and gas invasion, respectively.
Download or read book Time lapse Seismic in Reservoir Management written by Ian Jack and published by . This book was released on 1997 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geophysics and Geosequestration written by Thomas L. Davis and published by Cambridge University Press. This book was released on 2019-05-09 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the geophysical techniques and analysis methods for monitoring subsurface carbon dioxide storage for researchers and industry practitioners.
Download or read book Geophysics for Petroleum Engineers written by Fred Aminzadeh and published by Elsevier Inc. Chapters. This book was released on 2013-12-09 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monitoring or surveillance of reservoir fluids during the producing life of a field and mapping of oil–water and gas–oil interface are necessary for understanding the fluid dynamics. This information would allow improving developmental plans, locate production and injection wells, and optimize reservoir management. Engineers would like to have information between the well control for field-wide surveillance of fluid front. This would permit forecasting arrival of water in a producing well or understanding the effectiveness of sweep from the injected water or gas. Geophysical monitoring could have major impact on ultimate recovery and drilling efficiency.
Download or read book Seismic Time lapse Monitoring of Subsurface Fluid Flow written by David E. Lumley and published by . This book was released on 1995 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quantitative Seismic Interpretation written by Per Avseth and published by Cambridge University Press. This book was released on 2010-06-10 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantitative Seismic Interpretation demonstrates how rock physics can be applied to predict reservoir parameters, such as lithologies and pore fluids, from seismically derived attributes. The authors provide an integrated methodology and practical tools for quantitative interpretation, uncertainty assessment, and characterization of subsurface reservoirs using well-log and seismic data. They illustrate the advantages of these new methodologies, while providing advice about limitations of the methods and traditional pitfalls. This book is aimed at graduate students, academics and industry professionals working in the areas of petroleum geoscience and exploration seismology. It will also interest environmental geophysicists seeking a quantitative subsurface characterization from shallow seismic data. The book includes problem sets and a case-study, for which seismic and well-log data, and MATLAB® codes are provided on a website (http://www.cambridge.org/9780521151351). These resources will allow readers to gain a hands-on understanding of the methodologies.
Download or read book Time lapse Seismic Monitoring for Enhanced Oil Recovery and Carbon Capture and Storage Field Site at the Cranfield Field Mississippi written by Julie Nicole Ditkof and published by . This book was released on 2013 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cranfield field, located in southwest Mississippi, is an enhanced oil recovery and carbon sequestration project that has been under a continuous supercritical CO2 injection by Denbury Onshore LLC since 2008. Two 3D seismic surveys were collected in 2007, pre-CO2 injection, and in 2010 after > 2 million tons of CO2 was injected into the subsurface. The goal of this study is to characterize a time-lapse response between two seismic surveys to understand where injected CO2 is migrating and to map the injected CO2 plume edge. In order to characterize a time-lapse response, the seismic surveys were cross equalized using a trace-by-trace time shift. A normalized root-mean-square (NRMS) difference value was then calculated to determine the repeatability of the data. The data were considered to have "good repeatability," so a difference volume was calculated and showed a coherent seismic amplitude anomaly located through the area of interest. A coherent seismic amplitude anomaly was also present below the area of interest, so a time delay analysis was performed and calculated a significant added velocity change. A Gassmann-Wood fluid substitution workflow was then performed at two well locations to predict a saturation profile and observe post-injection expected changes in compressional velocity values at variable CO2 saturations. Finally, acoustic impedance inversions were performed on the two seismic surveys and an acoustic impedance difference volume was calculated to compare with the fluid substitution results. The Gassmann-Wood fluid substitution results predicted smaller changes in acoustic impedance than those observed from acoustic impedance inversions. At the Cranfield field, time-lapse seismic analysis was successful in mapping and quantifying the acoustic impedance change for some seismic amplitude anomalies associated with injected CO2. Additional well log data and refinement of the fluid substitution workflow and the model-based inversion performed is necessary to obtain more accurate impedance changes throughout the field instead of at a single well location.
Download or read book Seismic Data Analysis written by Özdoğan Yilmaz and published by SEG Books. This book was released on 2001 with total page 2065 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanding the author's original work on processing to include inversion and interpretation, and including developments in all aspects of conventional processing, this two-volume set is a comprehensive and complete coverage of the modern trends in the seismic industry - from time to depth, from 3D to 4D, from 4D to 4C, and from isotropy to anisotropy.
Download or read book A Data estimation based Approach for Quasi continuous Seismic Reservoir Monitoring written by Adeyemi Temitope Arogunmati and published by Stanford University. This book was released on 2011 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current strategies and logistics for seismic data acquisition impose restrictions on the calendar-time temporal resolution obtainable for a given time-lapse monitoring program. One factor that restricts the implementation of a quasi-continuous monitoring program using conventional strategies is the time it takes to acquire a complete survey. Here quasi-continuous monitoring describes the process of reservoir monitoring at short time intervals. This dissertation describes an approach that circumvents the restriction by requiring only a subset of a complete survey data each time an image of the reservoir is needed. Ideally, the time interval between survey subset acquisitions should be short so that changes in the reservoir properties are small. The accumulated data acquired are used to estimate the unavailable data at the monitor survey time, and the combined known and estimated data are used to produce an image of the subsurface for monitoring. Quasi-continuous seismic monitoring can be used to monitor geologic reservoirs during the injection phase of a carbon dioxide sequestration project. It can also be used to monitor reservoir changes between injector and producer wells during the secondary recovery phase in an oil field. The primary advantage of a quasi-continuous monitoring strategy over the conventional strategy is the high temporal resolution of the reservoir changes obtainable. Naturally, the spatial resolution of the image obtained using a subset of the data from a full survey will be worse than the spatial resolution of the image obtained using the complete data from a full survey. However, if the unavailable data are estimated perfectly, the spatial resolution is not lost. The choice of estimation algorithm and the size of the known data play an important role in the success of the approach presented in this dissertation.
Download or read book Application of Time Lapse Seismic Monitoring for the Control and Optimization of CO2 Enhanced Oil Recovery Operations written by Brian E. Toelle and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The ''Application of Time-Lapse Seismic Monitoring for the Control and Optimization of CO{sub 2} Enhanced Oil Recovery Operations'' project is investigating the potential for monitoring CO{sub 2} floods in carbonate reservoirs through the use of standard p-wave seismic data. This project will involve the use of 4D seismic (time lapse seismic) to try to observe the movement of the injected CO{sub 2} through the reservoir. The differences between certain seismic attributes, such as amplitude, will be used to detect and map the movement of CO{sub 2} within the reservoir. This technique has recently been shown to be effective in CO{sub 2} monitoring in EOR projects such as Weyborne. The project is being conducted in the Charlton 30/31 field in northern Michigan Basin which is a Silurian pinnacle reef that has completed its primary production. This field is now undergoing enhanced oil recovery using CO{sub 2}. The CO{sub 2} flood was initiated the end of 2005 when the injection of small amounts of CO{sub 2} begin in the A1 Carbonate. This injection was conducted for 2 months before being temporarily halted in order for pressure measurements to be conducted. The determination of the reservoir's porosity distribution is proving to be a significant portion of this project. In order to relate the differences observed between the seismic attributes seen on the multiple surveys and the actual location of the CO{sub 2}, a predictive reservoir simulation model had to be developed. From this model, an accurate determination of porosity within the carbonate reservoir must be obtained. For this certain seismic attributes have been investigated. The study reservoirs in the Charlton 30/31 field range from 50 to 400 acres in size. The relatively small area to image makes 3-D seismic data acquisition reasonably cost effective. Permeability and porosity vary considerably throughout the reef, thus it is essential to perform significant reservoir characterization and modeling prior to implementing a CO{sub 2} flood to maximize recovery efficiency. Should this project prove successful, the same technique could be applied across a large spectrum of the industry. In Michigan alone, the Niagaran reef play is comprised of over 700 Niagaran reefs with reservoirs already depleted by primary production. These reservoirs range in thickness from 200 to 400 ft and are at depths of 2000 to 5000 ft. Approximately 113 of these Niagaran oil fields have produced over 1 million bbls each and the total cumulative production is in excess of 300 million bbls and 1.4 Tcf. There could potentially be over 1 billion bbls of oil remaining in reefs in Michigan much of which could be mobilized utilizing techniques similar to those employed in this study.
Download or read book Active Geophysical Monitoring written by and published by Elsevier. This book was released on 2010-03-05 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Active geophysical monitoring is an important new method for studying time-evolving structures and states in the tectonically active Earth's lithosphere. It is based on repeated time-lapse observations and interpretation of rock-induced changes in geophysical fields periodically excited by controlled sources. In this book, the results of strategic systematic development and the application of new technologies for active geophysical monitoring are presented. The authors demonstrate that active monitoring may drastically change solid Earth geophysics, through the acquisition of substantially new information, based on high accuracy and real-time observations. Active monitoring also provides new means for disaster mitigation, in conjunction with substantial international and interdisciplinary cooperation. - Introduction of a new concept - Most experienced authors in the field - Comprehensiveness
Download or read book M moire pour le coll ge Mazarin touchant la d duction faire de ce qui a t donn par le dit coll ge en rues et places pour la commodit du public 31 juillet 1693 written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Rock Physics Handbook written by Gary Mavko and published by Cambridge University Press. This book was released on 2009-04-30 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: A significantly expanded new edition of this practical guide to rock physics and geophysical interpretation for reservoir geophysicists and engineers.
Download or read book Soft Computing and Intelligent Data Analysis in Oil Exploration written by M. Nikravesh and published by Elsevier. This book was released on 2003-04-22 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book highlights soft computing and geostatistics applications in hydrocarbon exploration and production, combining practical and theoretical aspects.It spans a wide spectrum of applications in the oil industry, crossing many discipline boundaries such as geophysics, geology, petrophysics and reservoir engineering. It is complemented by several tutorial chapters on fuzzy logic, neural networks and genetic algorithms and geostatistics to introduce these concepts to the uninitiated. The application areas include prediction of reservoir properties (porosity, sand thickness, lithology, fluid), seismic processing, seismic and bio stratigraphy, time lapse seismic and core analysis.There is a good balance between introducing soft computing and geostatistics methodologies that are not routinely used in the petroleum industry and various applications areas. The book can be used by many practitioners such as processing geophysicists, seismic interpreters, geologists, reservoir engineers, petrophysicist, geostatistians, asset mangers and technology application professionals. It will also be of interest to academics to assess the importance of, and contribute to, R&D efforts in relevant areas.
