Download or read book Condition Monitoring and Control for Intelligent Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2006-08-02 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition modelling and control is a technique used to enable decision-making in manufacturing processes of interest to researchers and practising engineering. Condition Monitoring and Control for Intelligent Manufacturing will be bought by researchers and graduate students in manufacturing and control and engineering, as well as practising engineers in industries such as automotive and packaging manufacturing.
Download or read book Proceedings of the 6th CIRP Sponsored International Conference on Digital Enterprise Technology written by George Q. Huang and published by Springer Science & Business Media. This book was released on 2009-12-12 with total page 1754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings volume contains articles presented at the CIRP-Sponsored Inter- tional Conference on Digital Enterprise Technology (DET2009) that takes place December 14–16, 2009 in Hong Kong. This is the 6th DET conference in the series and the first to be held in Asia. Professor Paul Maropoulos initiated, hosted and chaired the 1st International DET Conference held in 2002 at the University of D- ham. Since this inaugural first DET conference, DET conference series has been s- cessfully held in 2004 at Seattle, Washington USA, in 2006 at Setubal Portugal, in 2007 at Bath England, and in 2008 at Nantes France. The DET2009 conference continues to bring together International expertise from the academic and industrial fields, pushing forward the boundaries of research kno- edge and best practice in digital enterprise technology for design and manufacturing, and logistics and supply chain management. Over 120 papers from over 10 countries have been accepted for presentation at DET2009 and inclusion in this Proceedings volume after stringent refereeing process. On behalf of the organizing and program committees, the Editors are grateful to the many people who have made DET2009 possible: to the authors and presenters, es- cially the keynote speakers, to those who have diligently reviewed submissions, to members of International Scientific Committee, Organizing Committee and Advisory Committes, and to colleagues for their hard work in sorting out all the arrangements. We would also like to extend our gratitude to DET2009 sponsors, co-organizers, and supporting organizations.
Download or read book Data Driven Modeling for Additive Manufacturing of Metals written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-11-09 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is the process in which a three-dimensional object is built by adding subsequent layers of materials. AM enables novel material compositions and shapes, often without the need for specialized tooling. This technology has the potential to revolutionize how mechanical parts are created, tested, and certified. However, successful real-time AM design requires the integration of complex systems and often necessitates expertise across domains. Simulation-based design approaches, such as those applied in engineering product design and material design, have the potential to improve AM predictive modeling capabilities, particularly when combined with existing knowledge of the underlying mechanics. These predictive models have the potential to reduce the cost of and time for concept-to-final-product development and can be used to supplement experimental tests. The National Academies convened a workshop on October 24-26, 2018 to discuss the frontiers of mechanistic data-driven modeling for AM of metals. Topics of discussion included measuring and modeling process monitoring and control, developing models to represent microstructure evolution, alloy design, and part suitability, modeling phases of process and machine design, and accelerating product and process qualification and certification. These topics then led to the assessment of short-, immediate-, and long-term challenges in AM. This publication summarizes the presentations and discussions from the workshop.
Download or read book Proceedings of 5th International Conference on the Industry 4 0 Model for Advanced Manufacturing written by Lihui Wang and published by Springer Nature. This book was released on 2020-05-15 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing (AMP 2020), held in Belgrade, Serbia, on 1–4 June 2020. The event marks the latest in a series of high-level conferences that bring together experts from academia and industry to exchange knowledge, ideas, experiences, research findings, and information in the field of manufacturing. The book addresses a wide range of topics, including: design of smart and intelligent products, developments in CAD/CAM technologies, rapid prototyping and reverse engineering, multistage manufacturing processes, manufacturing automation in the Industry 4.0 model, cloud-based products, and cyber-physical and reconfigurable manufacturing systems. By providing updates on key issues and highlighting recent advances in manufacturing engineering and technologies, the book supports the transfer of vital knowledge to the next generation of academics and practitioners. Further, it will appeal to anyone working or conducting research in this rapidly evolving field.
Download or read book Monitoring and Control for Manufacturing Processes written by Steven Y. Liang and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Artificial Neural Networks for Intelligent Manufacturing written by C.H. Dagli and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The quest for building systems that can function automatically has attracted a lot of attention over the centuries and created continuous research activities. As users of these systems we have never been satisfied, and demand more from the artifacts that are designed and manufactured. The current trend is to build autonomous systems that can adapt to changes in their environment. While there is a lot to be done before we reach this point, it is not possible to separate manufacturing systems from this trend. The desire to achieve fully automated manufacturing systems is here to stay. Manufacturing systems of the twenty-first century will demand more flexibility in product design, process planning, scheduling and process control. This may well be achieved through integrated software and hardware archi tectures that generate current decisions based on information collected from manufacturing systems environment, and execute these decisions by converting them into signals transferred through communication network. Manufacturing technology has not yet reached this state. However, the urge for achieving this goal is transferred into the term 'Intelligent Systems' that we started to use more in late 1980s. Knowledge-based systems, our first efforts in this endeavor, were not sufficient to generate the 'Intelligence' required - our quest still continues. Artificial neural network technology is becoming an integral part of intelligent manufacturing systems and will have a profound impact on the design of autonomous engineering systems over the next few years.
Download or read book Manufacturing Systems Theory and Practice written by George Chryssolouris and published by Springer Science & Business Media. This book was released on 2006-02-28 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overviews manufacturing systems from the ground up, following the same concept as in the first edition. Delves into the fundamental building blocks of manufacturing systems: manufacturing processes and equipment. Discusses all topics from the viewpoint of four fundamental manufacturing attributes: cost, rate, flexibility and quality.
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book Monitoring and Control for Manufacturing Processes written by American Society of Mechanical Engineers. Winter Annual Meeting and published by . This book was released on 1990 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Twin Control written by Mikel Armendia and published by Springer. This book was released on 2019-01-05 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book summarizes the results of the European research project “Twin-model based virtual manufacturing for machine tool-process simulation and control” (Twin-Control). The first part reviews the applications of ICTs in machine tools and manufacturing, from a scientific and industrial point of view, and introduces the Twin-Control approach, while Part 2 discusses the development of a digital twin of machine tools. The third part addresses the monitoring and data management infrastructure of machines and manufacturing processes and numerous applications of energy monitoring. Part 4 then highlights various features developed in the project by combining the developments covered in Parts 3 and 4 to control the manufacturing processes applying the so-called CPSs. Lastly, Part 5 presents a complete validation of Twin-Control features in two key industrial sectors: aerospace and automotive. The book offers a representative overview of the latest trends in the manufacturing industry, with a focus on machine tools.
Download or read book Expanding the Vision of Sensor Materials written by Committee on New Sensor Technologies: Materials and Applications and published by National Academies Press. This book was released on 1995-07-06 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in materials science and engineering have paved the way for the development of new and more capable sensors. Drawing upon case studies from manufacturing and structural monitoring and involving chemical and long wave-length infrared sensors, this book suggests an approach that frames the relevant technical issues in such a way as to expedite the consideration of new and novel sensor materials. It enables a multidisciplinary approach for identifying opportunities and making realistic assessments of technical risk and could be used to guide relevant research and development in sensor technologies.
Download or read book Bioprocessing Technology for Production of Biopharmaceuticals and Bioproducts written by Claire Komives and published by John Wiley & Sons. This book was released on 2018-12-27 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for industrial and academic researchers and development scientists in the life sciences industry, Bioprocessing Technology for Production of Biopharmaceuticals and Bioproducts is a guide to the tools, approaches, and useful developments in bioprocessing. This important guide: • Summarizes state-of-the-art bioprocessing methods and reviews applications in life science industries • Includes illustrative case studies that review six milestone bio-products • Discuses a wide selection of host strain types and disruptive bioprocess technologies
Download or read book Information Technology for Balanced Manufacturing Systems written by Weiming Shen and published by Springer. This book was released on 2007-03-07 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: BASYS conferences were initially organized to promote the development of balanced automation systems. The first BASYS conference was successfully launched in Victoria, Brazil, in 1995. BASYS'06 is the 7th edition in this series. This book comprises three invited keynote papers and forty-nine regular papers accepted for presentation at the conference. All together, these papers will make significant contributions to the literature of Intelligent Technology for Balanced Manufacturing Systems.
Download or read book Design of Clothing Manufacturing Processes written by Jelka Geršak and published by Elsevier. This book was released on 2013-07-31 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: The era of mass manufacturing of clothing and other textile products is coming to an end; what is emerging is a post-industrial production system that is able to achieve the goal of mass-customised, low volume production, where the conventional borders between product design, production and user are beginning to merge. To continue developing knowledge on how to design better products and services, we need to design better clothing manufacturing processes grounded in science, technology, and management to help the clothing industry to compete more effectively. Design of clothing manufacturing processes reviews key issues in the design of more rapid, integrated and flexible clothing manufacturing processes.The eight chapters of the book provide a detailed coverage of the design of clothing manufacturing processes using a systematic approach to planning, scheduling and control. The book starts with an overview of standardised clothing classification systems and terminologies for individual clothing types. Chapter 2 explores the development of standardised sizing systems. Chapter 3 reviews the key issues in the development of a garment collection. Chapters 4 to 7 discuss particular aspects of clothing production, ranging from planning and organization to monitoring and control. Finally, chapter 8 provides an overview of common quality requirements for clothing textile materials.Design of clothing manufacturing processes is intended for R&D managers, researchers, technologists and designers throughout the clothing industry, as well as academic researchers in the field of clothing design, engineering and other aspects of clothing production. Considers in detail the design of sizing and classification systems Discusses the planning required in all aspects of clothing production from design and pattern making to manufacture Overviews the management of clothing production and material quality requirements
Download or read book Monitoring Diagnosis and Control for Manufacturing Processes Via Artificial Neural Networks written by Edward James Ko and published by . This book was released on 1990 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monitoring and Evaluation of Production Processes written by Anton Panda and published by Springer. This book was released on 2016-04-07 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents topics on monitoring and evaluation of production processes in the automotive industry. Regulation of production processes is also described in details. The text deals with the implementation and evaluation of these processes during the mass production of components useful in the automotive industry. It evaluates the effects and results achieved after implementation in practice. The book takes into account the different methodologies of the world's automakers and applicable standards, such as standard EN ISO 9001 and the requirements of VDA and ISO/TS 16949. The content is used to those working with the development, production and quality control of new products in the demanding automotive industry. The information provided may also be useful to engineers and technical staff in organizations working with series production and production of spare parts for the automotive and other demanding industries. The content presented was written based on discussions with various companies and organizations, such as Magna Steyr (Graz, Austria), Ford (Cologne, Germany; Prague, CZ), GM Powertrain (Győr, Hungary), VW (Škoda), ZF (Passau, Friedrichshafen, Germany), Bosch-Rexroth AG (Fellbach, Germany), John Deere (Mannheim, Germany; USA), Claas (Paderborn, Germany), Allison Transmission (USA), Landini (Reggio Emilia, Milan, Italy), Timken Polska (Sosnowiec, Poland), SNR France (Annecy, France), Sweden SKF Group (Lutsk, Ukraine), ZVL Ltd. (Hattingen, Germany), ZVL SpA (Milano, Italy), FAG Schaeffler Group (Debrecen, Hungary), VPZ (Vologda, Russia), ZKL OJSC (Brno, CZ), ZVL Auto Company Ltd. (Prešov, Slovakia), ZVL (Žilina, Slovakia), MAN (Munich, Germany), FTE Automotive (Kerpen, Germany), Rösler (Untermerzbach, Germany; Vienna, Austria), Spaleck (Bocholt, Germany) and Caterpillar (USA). This comprehensive study was supported by grant VEGA 1/0409/13.
Download or read book Manufacturing Process Controls for the Industries of the Future written by National Research Council and published by National Academies Press. This book was released on 1998-08-14 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing process controls include all systems and software that exert control over production processes. Control systems include process sensors, data processing equipment, actuators, networks to connect equipment, and algorithms to relate process variables to product attributes. Since 1995, the U.S. Department of Energy Office of Industrial Technology 's (OIT) program management strategy has reflected its commitment to increasing and documenting the commercial impact of OIT programs. OIT's management strategy for research and development has been in transition from a "technology push" strategy to a "market pull" strategy based on the needs of seven energy-and waste-intensive industries-steel, forest products, glass, metal casting, aluminum, chemicals, and petroleum refining. These industries, designated as Industries of the Future (IOF), are the focus of OIT programs. In 1997, agriculture, specifically renewable bioproducts, was added to the IOF group. The National Research Council Panel on Manufacturing Process Controls is part of the Committee on Industrial Technology Assessments (CITA), which was established to evaluate the OIT program strategy, to provide guidance during the transition to the new IOF strategy, and to assess the effects of the change in program strategy on cross-cutting technology programs, that is, technologies applicable to several of the IOF industries. The panel was established to identify key processes and needs for improved manufacturing control technology, especially the needs common to several IOF industries; identify specific research opportunities for addressing these common industry needs; suggest criteria for identifying and prioritizing research and development (R&D) to improve manufacturing controls technologies; and recommend means for implementing advances in control technologies.
