Download or read book Advances in Molten Slags Fluxes and Salts written by Ramana Reddy and published by Springer. This book was released on 2017-01-10 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on ferrous and non-ferrous metallurgy where ionic melts, slags, fluxes, or salts play important roles in industrial growth and economy worldwide. Technical topics included are: thermodynamic properties and phase diagrams and kinetics of slags, fluxes, and salts; physical properties of slags, fluxes, and salts; structural studies of slags; interfacial and process phenomena involving foaming, bubble formation, and drainage; slag recycling, refractory erosion/corrosion, and freeze linings; and recycling and utilization of metallurgical slags and models and their applications in process improvement and optimization. These topics are of interest to not only traditional ferrous and non-ferrous metal industrial processes but also new and upcoming technologies.

Download or read book Proceedings of the 8th International Symposium on Superalloy 718 and Derivatives written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2014-12-02 with total page 951 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization of Minerals Metals and Materials 2014 written by John S. Carpenter and published by John Wiley & Sons. This book was released on 2014-01-29 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on the characterization of minerals, metals, and materials as well as the application of characterization results on the processing of these materials. Focused sessions within the symposia include those centered on ferrous metals, non-ferrous metals, soft materials, ceramics, clays, composites, and minerals. In addition, sessions will focus exclusively on characterization concerns in the extraction, processing, and environmental application of materials. Finally, method development in characterization will be explored.

Download or read book Advances in Processing Technology of Flat Steel Products APT FS 2024 written by Santosh Kumar and published by Allied Publishers. This book was released on 2024-09-12 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flat steel products are fundamental to modern manufacturing and construction, serving as crucial materials in a wide array of industries. From automotive components and household appliances to building structures and packaging materials, flat steel’s versatility and strength make it indispensable. The flat steel industry has seen numerous technological advancements that have enhanced product quality and production efficiency. Key developments include: · Advanced Coating Technologies · Precision Manufacturing · High-Strength and Specialty Steels · Sustainability Initiatives The advancements in flat steel products have had a profound impact on both industry and society. In the industrial realm, these products have enabled the creation of safer, more efficient, and more durable materials. The automotive industry’s use of high-strength steel, for example, has led to safer vehicles with improved fuel efficiency. On a societal level, the widespread use of flat steel products has contributed to improved living standards. Household appliances and infrastructure developments have enhanced everyday life by providing reliable and durable solutions. Additionally, the impact of flat steel products on the economy cannot be overstated; they support numerous jobs and contribute significantly to global trade.

Download or read book Treatise on Process Metallurgy Volume 3 Industrial Processes written by and published by Newnes. This book was released on 2013-12-09 with total page 1810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process metallurgy provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. Coverage is divided into three volumes, entitled Process Fundamentals, encompassing process fundamentals, extractive and refining processes, and metallurgical process phenomena; Processing Phenomena, encompassing ferrous processing; non-ferrous processing; and refractory, reactive and aqueous processing of metals; and Industrial Processes, encompassing process modeling and computational tools, energy optimization, environmental aspects and industrial design. The work distils 400+ years combined academic experience from the principal editor and multidisciplinary 14-member editorial advisory board, providing the 2,608-page work with a seal of quality. The volumes will function as the process counterpart to Robert Cahn and Peter Haasen's famous reference family, Physical Metallurgy (1996)--which excluded process metallurgy from consideration and which is currently undergoing a major revision under the editorship of David Laughlin and Kazuhiro Hono (publishing 2014). Nevertheless, process and extractive metallurgy are fields within their own right, and this work will be of interest to libraries supporting courses in the process area. - Synthesizes the most pertinent contemporary developments within process metallurgy so scientists have authoritative information at their fingertips - Replaces existing articles and monographs with a single complete solution, saving time for busy scientists - Helps metallurgists to predict changes and consequences and create or modify whatever process is deployed

Download or read book Metallurgical Slags written by Nadine M. Piatak and published by Royal Society of Chemistry. This book was released on 2021-08-13 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a definitive reference on the environmental geochemistry and resource potential of metallurgical slags

Download or read book Fluid Mechanics and Fluid Power Volume 7 written by Krishna Mohan Singh and published by Springer Nature. This book was released on 2023-12-15 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed proceedings of the 9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP 2022). This book brings together scientific ideas and engineering solutions put forth by researchers and practitioners from academia and industry in the important and ubiquitous field of fluid mechanics. The contents of this book focus on fundamental issues and perspective in fluid mechanics, measurement techniques in fluid mechanics, computational fluid and gas dynamics, instability, transition and turbulence, fluid-structure interaction, multiphase flows, microfluidics, bio-inspired fluid mechanics, aerodynamics, turbomachinery, propulsion and power and other miscellaneous topics in the broad domain of fluid mechanics. This book is a useful reference to researchers and professionals working in the broad field of mechanics.

Download or read book International Advanced Researches Engineering Congress 2017 Proceeding Book written by Recep HALICIOGLU and published by Dr. R. HALICIOGLU. This book was released on 2017-12-29 with total page 2770 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTERNATIONAL WORKSHOPS (at IAREC'17) (This book inclueds English (main) and Turkish languages) International Workshop on Mechanical Engineering International Workshop on Mechatronics Engineering International Workshop on Energy Systems Engineering International Workshop on Automotive Engineering and Aerospace Engineering International Workshop on Material Engineering International Workshop on Manufacturing Engineering International Workshop on Physics Engineering International Workshop on Electrical and Electronics Engineering International Workshop on Computer Engineering and Software Engineering International Workshop on Chemical Engineering International Workshop on Textile Engineering International Workshop on Architecture International Workshop on Civil Engineering International Workshop on Geomatics Engineering International Workshop on Industrial Engineering International Workshop on Food Engineering International Workshop on Aquaculture Engineering International Workshop on Agriculture Engineering International Workshop on Mathematics Engineering International Workshop on Bioengineering Engineering International Workshop on Biomedical Engineering International Workshop on Genetic Engineering International Workshop on Environmental Engineering International Workshop on Other Engineering Science

Download or read book Mathematical Modeling and Simulation of Systems written by Volodymyr Kazymyr and published by Springer Nature. This book was released on with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 5th International Symposium on High Temperature Metallurgical Processing written by Tao Jiang and published by John Wiley & Sons. This book was released on 2014-01-10 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analysis, development, and/or operation of high temperature processes that involve the production of ferrous and nonferrous metals, alloys, and refractory and ceramic materials are covered in the book. The innovative methods for achieving impurity segregation and removal, by-product recovery, waste minimization, and/or energy efficiency are also involved. Eight themes are presented in the book: 1: High Efficiency New Metallurgical Technology 2: Fundamental Research of Metallurgical Process 3: Alloy and Materials Preparation 4: Roasting, Reduction, and Smelting 5: Sintering of Ores and Powder 6: Simulation and Modeling 7: Treatment of Solid Slag/Wastes and Complex Ores 8: Microwave Heating, Energy, and Environment

Download or read book Treatise on Process Metallurgy written by Roderick Guthrie and published by Elsevier. This book was released on 2024-01-25 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Process Metallurgy: Volume One, Process Fundamentals provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. In these fully updated volumes, coverage is expanded into four volumes, including Process Fundamentals, encompassing process fundamentals, structure and properties of matter; thermodynamic aspects of process metallurgy, and rate phenomena in process metallurgy; Processing Phenomena, encompassing interfacial phenomena in high temperature metallurgy, metallurgical process phenomena, and metallurgical process technology; Metallurgical Processes, encompassing mineral processing, aqueous processing, electrochemical material and energy processes, and iron and steel technology, non-ferrous process principles and production technologies, and more. The work distills the combined academic experience from the principal editor and the multidisciplinary four-member editorial board. Provides the entire breadth of process metallurgy in a single work Includes in-depth knowledge in all key areas of process metallurgy Approaches the topic from an interdisciplinary perspective, providing broad range coverage on topics

Download or read book High Electrical Resistant Materials written by Muktikanta Panigrahi and published by John Wiley & Sons. This book was released on 2024-02-23 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: HIGH ELECTRICAL RESISTANT MATERIALS The book describes how the utilization of high-carbon slag/pond ash/fly ash for making value-added ceramics is useful for the electrical sectors. Since waste materials are currently endangering our environment, ways of utilizing them have become a global challenge. Currently, R&D work is being carried out to utilize these materials for producing value-added products. This book details the investigations to utilize fly ash (FA) and pond ash (PA) - both waste materials from thermal power plants - with high-carbon ferrochrome (HCFC) slag (by-product of the ferrochrome industry), for producing a novel material for ceramics. Kaolin/K-feldspar is mixed with PA/HCFC slag to produce ceramics with the formation of mullite. The FA/PA/HCFC slag-based ceramics can replace porcelain-based ceramics, and some permanent ceramic structures can be constructed with such wastes. Properties and structures made with ceramics are found to be comparable with those made with porcelain-based ceramics. Performances of these materials above ambient temperature have been evaluated and results indicate the possible replacement of porcelain with these newly invented ceramics. Audience The book will be used by electrical and civil engineers in the electrical, construction, and ceramic industries as well as the industrial waste sector. Researchers in materials science, structural, civil and electrical engineering, environmental science, and ceramic engineering, will also have high interest.

Download or read book Sustainable Utilization of Metals written by Bernd Friedrich and published by MDPI. This book was released on 2020-05-23 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The high demand for advanced metallic materials raises the need for an extensive recycling of metals and such a sustainable use of raw materials. "Sustainable Utilization of Metals - Processing, Recovery and Recycling" comprises the latest scientific achievements in efficient production of metals and such addresses sustainable resource use as part of the circular economy strategy. This policy drives the present contributions, aiming on the recirculation of EoL-streams such as Waste Electric and Electronic Equipment (WEEE), multi-metal alloys or composite materials back into metal production. This needs a holistic approach, resulting in the maximal avoidance of waste. Considering both aspects, circular economy and material design, recovery and use of minor metals play an essential role, since their importance for technological applications often goes along with a lack of supply on the world market. Additionally, their ignoble character and low concentration in recycling materials cause an insufficient recycling rate of these metals, awarding them the status of “critical metals”. In order to minimize losses and energy consumption, this issue explores concepts for the optimization concerning the interface between mechanical and thermal pre-treatment and metallurgical processes. Such new approaches in material design, structural engineering and substitution are provided in the chapters.

Download or read book Electric Arc Furnace Methods to Decrease Energy Consumption written by Alberto N. Conejo and published by Springer Nature. This book was released on with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applications of Process Engineering Principles in Materials Processing Energy and Environmental Technologies written by Shijie Wang and published by Springer. This book was released on 2017-02-07 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection offers new research findings, innovations, and industrial technological developments in extractive metallurgy, energy and environment, and materials processing. Technical topics included in the book are thermodynamics and kinetics of metallurgical reactions, electrochemical processing of materials, plasma processing of materials, composite materials, ionic liquids, thermal energy storage, energy efficient and environmental cleaner technologies and process modeling. These topics are of interest not only to traditional base ferrous and non-ferrous metal industrial processes but also to new and upcoming technologies, and they play important roles in industrial growth and economy worldwide.

Download or read book Energy Technology 2023 written by Shafiq Alam and published by Springer Nature. This book was released on 2023-02-07 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clean and sustainable energy is of paramount importance for industrial activities, economic development, environment, and public welfare. Aiming to reach NetZero, researchers in both academia and industry as well as policymakers are now putting tremendous efforts into the generation, storage, and applications of clean energy. This collection focuses on new and efficient energy technologies including innovative ore beneficiation, smelting technologies, recycling and waste heat recovery, and emerging novel energy solutions. The volume also covers a broad range of mature and new technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal intensity and pollutants, and reduce carbon dioxide and other greenhouse emissions. Topics include, but are not limited to:• Energy efficient technologies for minerals, metals & materials processing • Clean energy technologies, such as biomass, solar, wind, geothermal, nuclear including SMRs, hydrogen, etc. • Renewable energy resources to reduce the consumption of traditional fossil fuels • Emerging technologies for renewable energy harvesting, conversion, and storage • New concepts or devices for energy generation, conversion, and distribution • Waste heat recovery and other industrial energy efficient technologies • Energy education and energy regulation • Scale-up, stability, and life-cycle analysis of energy technologies and improvement of existing energy-intensive processes • Theory and simulation in energy harvesting, conversion, and storage • Design, operation, and optimization of processes for energy generation (e.g., carbon capture) and conversion of energy carriers • Energy efficiency improvement in process engineering (e.g., for biomass conversion and improved combustion) and electrical engineering (e.g., for power conversion and developing smart grids) • Thermo-electric/electrolysis/photo-electrolysis/fundamentals of PV • Emission control, CO2 capture, and conversion • Carbon sequestration techniques • CO2 and other greenhouse gas reduction metallurgy in ferrous (iron & steel making and forming), non-ferrous and reactive metals including critical rare-earth metals • Sustainability and life cycle assessment of energy systems • Thermodynamics and modelling for sustainable metallurgical processes • 'Smart cool materials' for urban heat island mitigation (such as cool roof infrared reflecting material, and low-temperature heat absorbers for use in air conditioner condensers - like 'endothermic materials') • Methodologies for reducing the cost of energy materials production • Circular economy and developing resource efficiency model for cutting down the transport from remote places • Materials extraction and processing steps for enhancing energy efficiencies in batteries, supercapacitors, and energy efficient cells • Foundational industry (metals-alloys, chemicals, refractories, cement) and energy economy and role of mineral extraction

Download or read book Civil Engineering and Materials written by Catalina Spataru and published by Trans Tech Publications Ltd. This book was released on 2012-11-12 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICCEM 2012 Selected, peer reviewed papers from the 2012 International Conference on Civil Engineering and Materials (ICCEM 2012), July 7-8, 2012, Paris, France