Download or read book Computer Simulations of Liquid Crystals and Polymers written by Paolo Pasini and published by Springer Science & Business Media. This book was released on 2005-02-15 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid crystals, polymers and polymer liquid crystals are soft condensed matter systems of major technological and scientific interest. An understanding of the macroscopic properties of these complex systems and of their many and interesting peculiarities at the molecular level can nowadays only be attained using computer simulations and statistical mechanical theories. Both in the Liquid Crystal and Polymer fields a considerable amount of simulation work has been done in the last few years with various classes of models at different special resolutions, ranging from atomistic to molecular and coarse-grained lattice models. Each of the two fields has developed its own set of tools and specialized procedures and the book aims to provide a state of the art review of the computer simulation studies of polymers and liquid crystals. This is of great importance in view of a potential cross-fertilization between these connected areas which is particularly apparent for a number of experimental systems like, e.g. polymer liquid crystals and anisotropic gels where the different fields necessarily merge. An effort has been made to assess the possibilities of a coherent description of the themes that have developed independently, and to compare and extend the theoretical and computational techniques put forward in the different areas.

Download or read book Flexible Polymer Chains in Elongational Flow written by Tuan Q. Nguyen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: The behavior of polymer solutions in simple shear flows has been the subject of considerable research in the past. On the other hand, reports on polymers in elongational flow have appeared comparatively recently in the literature. Elongational flow with an inherent low vorticity is known to be more effective in extending polymer chains than simple shear flow and thus is more interesting from the point of view of basic (molecular chain dynamics at high deformation) and applied polymer science (rheology, fiber extrusion, drag reduction, flow through porous media). Undoubtly, one landmark in the field of polymer dynamics in elongational flow was the notion of critical strain-rate for chain extension, initially put forward by A. Peterlin (1966) and later refined into the "coil-stretching" transition by P. G. de Gennes and H. Hinch (1974). In the two decades which followed, significant progress in the understanding of chain conformation in "strong" flow has been accomplished through a combination of advances in instrumentation, computation techniques and theoretical studies. As a result of the multidisciplinary nature of the field, information on polymer chains in "strong" flow is accessible only from reviews and research papers scattered in disparate scientific journals. An important objective of this book is to remedy that situation by providing the reader with up-to-date knowledge in a single volume. The editors therefore invited leading specialists to provide both fundamental and applied information on the multiple facets of chain deformation in elongational flow.

Download or read book The Mesoscopic Theory of Polymer Dynamics written by Vladimir Nikolaevich Pokrovskiĭ and published by Springer Science & Business Media. This book was released on 2000 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our brutal century of atom bombs and spaceships can also be called the century ofpolymers. In any case, the broad spreading ofsynthetic polymer materials is one of thesigns of our time. A look at the various aspects of our life is enough to convince us that polymeric materials (textiles, pl- tics, rubbers) are as widely spread and important in our life as are other materials (metals and non-metals) derived from small molecules. Polymers have entered the life of the twentieth century as irreplaceable construction materials. Polymers differ from other substances by the size of their molecules which, appropriately enough, are referred to as macromolecules, since they consist of thousands or tens of thousands of atoms (molecular weight up to -4 6 10 ormore) andhave a macroscopic rectilinear length (upto 10 cm). The atoms ofa macromolecule are firmly held together by valence bonds, fo- ing a single entity. In polymeric substances, the weaker van der Waals forces have an effect on the components of the macromolecules which form the system. The structure of polymeric systems is more complicated than that oflow-molecular solids or liquids, but there are some common features: the atoms within a given macromolecule are ordered, but the centres ofmass of the individual macromolecules and parts of them are distributed randomly. Remarkably, the mechanical response of polymeric systems combines the elasticity of a solid with the fluidity of a liquid.

Download or read book Physics Briefs written by and published by . This book was released on 1992 with total page 1406 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rheo Physics of Multiphase Polymer Systems written by Kai Sondergaard and published by CRC Press. This book was released on 1995-06-02 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE PREFACE Almost all polymeric systems are subjected to a flow field at least once along the route between preparation and application. . . . There is also an increased interest in predictive models on phase behavior and suitable techniques for characterizing the structure of these systems when subjected to flow. Multiphase polymeric systems are particularly susceptible to flow, which may cause orientation of species, morphological changes, and phase transitions. All these events may, in turn, affect the end product properties, such as permeability, electrical conductivity, [and] mechanical properties. In processing, escalating needs have evolved for optimization and development of novel and more uniform product properties and increased productivity. In order to arrive at an understanding of processing polymeric systems under elastic flow conditions, it is convenient to analyze the basic physical mechanisms under conditions that enable development of predictive models in conjunction with controlled experimentation. . . . In recent years, the science of rheo-physics has evolved and now involves both advanced theories and experimental techniques. Rheo-physics means the rheological, morphological, and thermodynamic behavior of structured polymer systems during flow. . . . In this monograph, the rheo-optical techniques are . . . emphasized. The book gives an introduction to rheo-physics, including fundamentals of theories, and a representative selection of applications of rheo-optical techniques for analyzing multiphase systems. The chapters contain both practical advice for the new experimenter . . . as well as review material for the experienced scientist.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1971 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Phase Behavior of Polymer Blends written by Karl Freed and published by Springer Science & Business Media. This book was released on 2005-09-01 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamics and Patterns in Complex Fluids written by Akira Onuki and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth Nishinomiya-Yukawa Memorial Symposium, devoted to the topic of dynamics and patterns in complex fluids, was held on October 26 and 27, 1989, in Nishinomiya City, Japan, where ten invited speakers gave their lectures. A one-day meeting, comprising short talks and poster sessions, was then held on the same topic on October 28 at the Research Institute for Fundamental Physics, Kyoto University. The present volume contains the 10 invited papers and 38 contributed papers presented at these two meetings. The symposium was sponsored by Nishinomiya City, where Prof. Hideki Yukawa once lived and where he wrote the celebrated paper describing the work that was later honored by a Nobel prize. The topic of the fourth symposium was chosen from one of the most vigorously evolving and highly interdisciplinary fields in condensed matter physics. The field of complex fluids is very diverse and still in its infancy and, as a result, the definition of a complex fluid varies greatly from one researcher to the next. One of the objectives of the symposium was to clarify its definition by explicitly posing a number of potentially rich problems waiting to be explored. Indeed, experimentalists are disclosing a variety of intriguing dynamical phenomena in complex systems such as polymers, liquid crystals, gels, colloids, and surfactant systems. We, the organizers, hope that the symposium will contribute to the increasing importance of the field in the coming years.

Download or read book Transport Phenomena in Complex Fluids written by Teodor Burghelea and published by Springer Nature. This book was released on 2019-12-10 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough overview of transport phenomena in complex fluids, based on the latest research results and the newest methods for their analytical prediction and numerical simulation. The respective chapters cover several topics, including: a description of the structural features of the most common complex fluids (polymer and surfactant solutions, colloidal suspensions); an introduction to the most common non-Newtonian constitutive models and their relationship with the fluid microstructure; a detailed overview of the experimental methods used to characterise the thermophysical properties, bulk rheology, and surface properties of complex fluids; a comprehensive introduction to heat, mass, and momentum transport, and to hydrodynamic instabilities in complex fluids; and an introduction to state-of-the-art numerical methods used to simulate complex fluid flows, with a focus on the Smoothed Particle Hydrodynamics (SPH) and the Dissipative Particle Dynamics (DPD) techniques. Subsequent chapters provide in-depth descriptions of phenomena such as thermal convection, elastic turbulence, mixing of complex fluids, thermophoresis, sedimentation, and non-Newtonian drops and sprays. The book addresses research scientists and professionals, engineers, R&D managers and graduate students in the fields of engineering, chemistry, biology, medicine, and the applied and fundamental sciences.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Journal of Rheology written by and published by . This book was released on 2009 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes abstracts from the Journal of the Society of Rheology, Japan.

Download or read book The Lattice Boltzmann Method written by Timm Krüger and published by Springer. This book was released on 2016-11-07 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the theory, practice, and implementation of the Lattice Boltzmann (LB) method, a powerful computational fluid dynamics method that is steadily gaining attention due to its simplicity, scalability, extensibility, and simple handling of complex geometries. The book contains chapters on the method's background, fundamental theory, advanced extensions, and implementation. To aid beginners, the most essential paragraphs in each chapter are highlighted, and the introductory chapters on various LB topics are front-loaded with special "in a nutshell" sections that condense the chapter's most important practical results. Together, these sections can be used to quickly get up and running with the method. Exercises are integrated throughout the text, and frequently asked questions about the method are dealt with in a special section at the beginning. In the book itself and through its web page, readers can find example codes showing how the LB method can be implemented efficiently on a variety of hardware platforms, including multi-core processors, clusters, and graphics processing units. Students and scientists learning and using the LB method will appreciate the wealth of clearly presented and structured information in this volume.

Download or read book Nonequilibrium Molecular Dynamics written by Billy D. Todd and published by Cambridge University Press. This book was released on 2017-03-10 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This coherent collection of theory, algorithms, and illustrative results presents the field of nonequilibrium molecular dynamics in detail.

Download or read book Polymer Mechanochemistry written by Roman Boulatov and published by Springer. This book was released on 2015-10-17 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Current Chemistry presents critical reviews of the present and future trends in modern chemical research. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field. Review articles for the individual volumes are invited by the volume editors. Readership: research chemists at universities or in industry, graduate students.

Download or read book Fast Scanning Calorimetry written by Christoph Schick and published by Springer. This book was released on 2016-06-28 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decades, the scan rate range of calorimeters has been extended tremendously at the high end, from approximately 10 up to 10 000 000 °C/s and more. The combination of various calorimeters and the newly-developed Fast Scanning Calorimeters (FSC) now span 11 orders of magnitude, by which many processes can be mimicked according to the time scale(s) of chemical and physical transitions occurring during cooling, heating and isothermal stays in case heat is exchanged. This not only opens new areas of research on polymers, metals, pharmaceuticals and all kinds of substances with respect to glass transition, crystallization and melting phenomena, it also enables in-depth study of metastability and reorganization of samples on an 1 to 1000 ng scale. In addition, FSC will become a crucial tool for understanding and optimization of processing methods at high speeds like injection molding. The book resembles the state-of-the art in Thermal Analysis & Calorimetry and is an excellent starting point for both experts and newcomers in the field.

Download or read book Nonlinear Polymer Rheology written by Shi-Qing Wang and published by John Wiley & Sons. This book was released on 2018-02-06 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating latest research results and characterization techniques, this book helps readers understand and apply fundamental principles in nonlinear polymer rheology. The author connects the basic theoretical framework with practical polymer processing, which aids practicing scientists and engineers to go beyond the existing knowledge and explore new applications. Although it is not written as a textbook, the content can be used in an upper undergraduate and first year graduate course on polymer rheology. • Describes the emerging phenomena and associated conceptual understanding in the field of nonlinear polymer rheology • Incorporates details on latest experimental discoveries and provides new methodology for research in polymer rheology • Integrates latest research results and new characterization techniques like particle tracking velocimetric method • Focuses on the issues concerning the conceptual and phenomenological foundations for polymer rheology • Has a companion website for readers to access with videos complementing the content within several chapters

Download or read book Gels Structures Properties and Functions written by Masayuki Tokita and published by Springer. This book was released on 2009-10-08 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes 28 contributions to the Toyoichi Tanaka Memorial Symposium on Gels which took place at Arcadia Ichigaya on September 10th-12th, 2008. The contributions from leading scientists cover a broad spectrum of topics concerning: Structure and Functional Properties of Gels - Swelling of Gels - Industrial and Biomedical Application. The symposium was held in the style of Faraday Discussions, which stimulated the active discussion. After the symposium, each manuscript was rewritten based on the discussion and the critical review. Since the research on gels is becoming more and more important both for academia and industry, this book will be an essential source of information.