Download or read book Molecular Beam Epitaxial Growth and Characterization of Single Crystal Ferromagnetic Shape Memory Nickel manganese gallium Films written by Jianwei Dong and published by . This book was released on 2004 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Molecular Beam Epitaxial Growth Characterization and Devices of Modulated Semiconductor Structures written by Wen I. Wang and published by . This book was released on 1990 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substrate stabilized metastable single crystal germanium (1-x) stannide (x) films can be grown by molecular beam epitaxy (MBE). We have grown for the first time single crystal Ge (1-x) Sn(x) alloys on lattice matched gallium antimonide (with x=0.5) and indium phosphides substrates up to a thickness of 0.3 micrometer. Reflection high energy electron diffraction (RHEED) observations and x-ray measurements show that even at very small lattice mismatch, single crystal Ge(1-x)Sn(x) films cannot be grown thicker than 0.3 micrometer. Our x-ray results suggest that the critical thickness of alpha-Sn and Ge(1-x)Sn(x) single crystal films is mainly determined by a phase transition mechanism, and the dislocation generation equivalent critical thickness is an overestimate. Under practical MBE growth conditions, it is very difficult to grow thick films, due to the sensitivity of the critical thickness to composition fluctuations. We have shown that even under an exact lattice match between substrate and film, the critical film thickness is limited. Keywords: Metastable alloys; Single crystals; Germanium; Antimony; X-Ray diffraction; Aluminum; Gallium; Tin; Surface structure; Infrared detectors. (jg).

Download or read book Fabrication and Crystallographic Features of Epitaxial NiMnGa Ferromagnetic Shape Memory Alloy Thin Films written by Bo Yang and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Epitaxial Ni-Mn-Ga thin films have attracted considerable attention, since they are promising candidates for magnetic sensors and actuators in micro-electro-mechanical systems. Comprehensive information on the microstructural and crystallographic features of the NiMnGa films and their relationship with the constraints of the substrate is essential for further property optimization. In the present work, epitaxial Ni-Mn-Ga thin films were produced by DC magnetron sputtering and then characterized by x-ray diffraction technique (XRD) and backscatter electron diffraction equipped in scanning electron microscope (SEM-EBSD). Epitaxial NiMnGa thin films with nominal composition of Ni50Mn30Ga20 and thickness of 1.5 μm were successfully fabricated on MgO monocrystalline substrate by DC magnetron sputtering, after the optimization of sputtering parameters such as sputtering power, substrate temperature and seed layer by the present work. XRD diffraction measurements demonstrate that the epitaxial NiMnGa thin films are composed of three phases: austenite, NM martensite and 7M martensite. With the optimized measurement geometries, maximum number of diffraction peaks of the concerning phases, especially of the low symmetrical 7M martensite, are acquired and analyzed. The lattice constants of all the three phases under the constraints of the substrate in the films are fully determined. These serve as prerequisites for the subsequent EBSD crystallographic orientation characterizations. SEM-EBSD in film depth analyses further verified the co-existence situation of the three constituent phases: austenite, 7M martensite and NM martensite. NM martensite is located near the free surface of the film, austenite above the substrate surface, and 7M martensite in the intermediate layers between austenite and NM martensite. Microstructure characterization shows that both the 7M martensite and NM martensite are of plate morphology and organized into two characteristic zones featured with low and high relative second electron image contrast. Local martensite plates with similar plate morphology orientation are organized into plate groups or groups or variant colonies. Further EBSD characterization indicates that there are four distinct martensite plates in each variant groups for both NM and 7M martensite. Each NM martensite plate is composed of paired major and minor lamellar variants in terms of their thicknesses having a coherent interlamellar interface, whereas, each 7M martensite plate contains one orientation variant. Thus, there are four orientation 7M martensite variants and eight orientation NM martensite variants in one variant group. According to the crystallographic orientation of martensites and the crystallographic calculation, for NM martensite, the inter-plate interfaces are composed of compound twins in adjacent NM plates. The symmetrically distribution of compound twins results in the long and straight plate interfaces in the low relative contrast zone. The asymmetrically distribution leads to the change of inter-plate interface orientation in the high relative contrast zone. For 7M martensite, both Type-I and Type-II twin interfaces are nearly perpendicular to the substrate surface in the low relative contrast zones. The Type-I twin pairs appear with much higher frequency, as compared with that of the Type-II twin pairs. However, there are two Type-II twin interface trace orientations and one Type-I twin interface trace orientation in the high relative contrast zones. The Type-II twin pairs are more frequent than the Type-I twin pairs. The inconsistent occurrences of the different types of twins in different zones are originated from the substrate constrain. The crystallographic calculation also indicates that the martensitic transformation sequence is from Austenite to 7M martensite and then transform into NM martensite (A→7M→NM). [...].

Download or read book Epitaxial Growth and Characterization of Narrow Bandgap III V Semiconductors and Related Semimetals written by Sukgeun Choi and published by . This book was released on 2006 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thin Film Growth Techniques for Low Dimensional Structures written by R.F.C. Farrow and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work represents the account of a NATO Advanced Research Workshop on "Thin Film Growth Techniques for Low Dimensional Structures", held at the University of Sussex, Brighton, England from 15-19 Sept. 1986. The objective of the workshop was to review the problems of the growth and characterisation of thin semiconductor and metal layers. Recent advances in deposition techniques have made it possible to design new material which is based on ultra-thin layers and this is now posing challenges for scientists, technologists and engineers in the assessment and utilisation of such new material. Molecular beam epitaxy (MBE) has become well established as a method for growing thin single crystal layers of semiconductors. Until recently, MBE was confined to the growth of III-V compounds and alloys, but now it is being used for group IV semiconductors and II-VI compounds. Examples of such work are given in this volume. MBE has one major advantage over other crystal growth techniques in that the structure of the growing layer can be continuously monitored using reflection high energy electron diffraction (RHEED). This technique has offered a rare bonus in that the time dependent intensity variations of RHEED can be used to determine growth rates and alloy composition rather precisely. Indeed, a great deal of new information about the kinetics of crystal growth from the vapour phase is beginning to emerge.

Download or read book Crystal and Epitaxial Growth written by V. Alexander Stefan, Editor and published by Stefan University Press. This book was released on 2002 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Atomistic Aspects of Epitaxial Growth written by Miroslav Kotrla and published by Springer Science & Business Media. This book was released on 2002-07-31 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Research Workshop, held in Dasia, Corfu, Greece, June 25-30, 2001

Download or read book Growth and Characterization of Epitaxial Oxide Thin Films written by Ashish Garg and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Epitaxial oxide thin films are used in many technologically important device applications. This work deals with the deposition and characterization of epitaxial WO3 and SrBi2Ta2O9 (SBT) thin films on single crystal oxide substrates. WO3 thin films were chosen as a subject of study because of recent findings of superconductivity at surfaces and twin boundaries in the bulk form of this oxide. Highly epitaxial thin films would be desirable in order to be able to create a device within a film without patterning it, by locally creating superconducting regions (e.g. twins) within an otherwise defect free film by reducing or doping the film with Na. Films were deposited by reactive magnetron sputtering at various temperatures on single crystal SrTiO3 (100) and R-sapphire substrates. X-ray diffraction studies showed that the optimised films were highly (001) oriented, quality of epitaxy improving with decreasing deposition temperature. AFM studies revealed columnar growth of these films. Films were heat treated with Na vapour in order to reduce or dope them with Na. Low temperature measurements of the reduced films did not show existence of any superconductivity. SBT is a ferroelectric oxide and its thin films are attractive candidates for non-volatile ferroelectric random access memory (FRAM) applications. High structural anisotropy leads to a high degree of anisotropy in its ferroelectric properties which makes it essential to study epitaxial SBT films of different orientations. In this study, SBT films of different orientations were deposited on different single crystal substrates by pulsed laser ablation. Highly epitaxial c-axis oriented and smooth SBT films were deposited on SrTiO3 (100) substrates. AFM studies revealed the growth of these films by 3-D Stranski-Krastanov mode. However, these films did not exhibit any ferroelectric activity. Highly epitaxial (116)-oriented films were deposited on SrTiO3 (110) substrates. These films were also very smooth with root mean square (RMS) roughness of 15-20 Å. Films deposited on TiO2 (110) were partially a-/b-axis oriented and showed the formation of c-axis oriented SBT and many impurities. Completely a-/b-axis oriented SBT films were deposited on LaSrAlO4 (110) substrates. Films deposited at non-optimal growth temperatures showed the formation of many impurities. Attempts were also made towards depositing Sr2RuO4 films on LaSrAlO4 (110) substrates, which can act as a bottom electrode for ferroelectric SBT films.

Download or read book Epitaxial Growth written by J. W. Matthews and published by Elsevier. This book was released on 2013-10-22 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Epitaxial Growth Part B is the second part of a collection of review articles that describe various aspects of the growth of single-crystal films on single-crystal substrates. The topics discussed are the nucleation of thin films, the structure of the interface between film and substrate, and the generation of defects during film growth. The methods used to prepare and examine thin films are described and a list of the overgrowth-substrate combinations studied so far is given.

Download or read book Epitaxial Nd Fe B films Growth texture magnetism and the influence of mechanical elongation written by Ah Ram Kwon and published by Cuvillier Verlag. This book was released on 2009-07-20 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work in this thesis focuses on the preparation of epitaxial Nd-Fe-B thin films using pulsed laser deposition for good hard magnetic properties. They are suitable for a basic understanding of the intrinsic magnetic properties. Compositional control was necessary to achieve phase formation with improved magnetic properties. Nd-Fe-B samples were prepared on single crystal MgO (001) substrates with different buffer layers in order to obtain good textures with different surface morphology. The smooth and continuous epitaxial films were suitable for performing magnetization measurements under stress. Although the magnetostriction is easily neglected in the Nd2Fe14B compound, distinguishable inverse magnetostriction was observed by conventional tensile elongation with a flexible substrate. As a result, anisotropic strain in the film, which breaks the in-plane symmetry, affected the opening angle during the spin reorientation. Therefore an elliptical distortion of the in-plane anisotropy below the spin reorientation temperature of Nd2Fe14B was obtained, whereas the transition temperature itself was not influenced significantly.

Download or read book MBE Growth of Alinn and Bi2se3 Thin Films and Hetero Structures written by ZIYAN. WANG and published by . This book was released on 2017-01-26 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation, "MBE Growth of AlInN and Bi2Se3 Thin Films and Hetero-structures" by Ziyan, Wang, 王子砚, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract:  Molecular Beam Epitaxy is an advanced method for the synthesis of single-crystal thin-film structures. However, the growth behavior varies case by case due to the complicated kinetic process. In this thesis, the epitaxial growth processes of AlxIn1-xN alloy and Bi2Se3 thin-films are studied. Heteroepitaxial growth of AlxIn1-xN alloy on GaN(0001) substrate is carried out in the Nitrogen-rich flux conditions. A series of transient growth stages are identified from the initiation of the deposition. A significant effect of source beam-flux on the incorporation rate of Indium atoms is observed and measured. A correlation between the incorporation rate and the growth conditions (flux ratio and growth temperature) is revealed by the dependence of the growth-rate of the film on beam fluxes. A mathematic model is then suggested to explain the effect, through which the measured results indicating a surface diffusing and trapping process is indicated. Unexpected behavior of the lattice-parameter evolution of the growth front during deposition is also observed, indicating a complex strain-relaxation process of the epilayers. For three-dimensional (3D) topological insulator of Bi2Se3, growths are attempted on various substrate surfaces, including clean Si(111)-(7x7), Hydrogen terminated Si(111), Bismuth induced Si(111) reconstructed surfaces, GaN(0001), and some selenide "psudo-substrates." The specific formation process of this quintuple-layered material in MBE is investigated, from which the Van der Waals epitaxy growth characteristics inherent to deposition of Bi2Se3 is determined, and the mechanism of the "two-step growth" technique for this material is further clarified. Among the various substrates, those that are inert to chemical reaction with Bi/Se are important for the growth. The epilayers' lattice-misfit with the substrate is also a crucial factor to the structural quality of the Bi2Se3 epifilms, such as the defects density and the single-crystalline domain size. The effect of a vicinal substrate on suppressing the twin-defects in film is also addressed. Using a suitable substrate and adapting an optimal condition, ultra-thin films of Bi2Se3 with a superior structural quality have been achieved. Multilayered Bi2Se3 structures with ZnSe and In2Se3 spacers are attempted. Finally the high-quality superlattices of Bi2Se3/In2Se3 are successfully synthesized. The hetero-interfaces in the superlattice structure of Bi2Se3/In2Se3 are sharp, and the individual layers are uniform with thicknesses being strictly controlled. The behaviors of strain evolution during the hetero-growth process are finally investigated. An exponential relaxation of misfit strain is observed. And the correlation between the residual strain and the starting surface in the initial growth stage is also identified. DOI: 10.5353/th_b4716348 Subjects: Aluminum alloys Indium alloys Bismuth compounds Selenium compounds Thin films Heterostructures Molecular beam epitaxy

Download or read book Directory of Graduate Research written by American Chemical Society. Committee on Professional Training and published by . This book was released on 2005 with total page 1932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Faculties, publications and doctoral theses in departments or divisions of chemistry, chemical engineering, biochemistry and pharmaceutical and/or medicinal chemistry at universities in the United States and Canada.

Download or read book Epitaxial Growth of Thin Nickel Films on Single Crystal Copper written by Elaine Cohen Felder and published by . This book was released on 1981 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the Second International Symposium on Silicon Molecular Beam Epitaxy written by John Condon Bean and published by . This book was released on 1988 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Growth and Characterization of Epitaxial Films and Magnetic Multilayers Grown by Dc Sputtering written by Reza Loloee and published by . This book was released on 2000 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Epitaxial Growth Characterization and Application of Novel Wide Bandgap Oxide Semiconductors written by Jeremy West Mares and published by . This book was released on 2010 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work, a body of knowledge is presented which pertains to the growth, characterization and exploitation of high quality, novel II-IV oxide epitaxial films and structures grown by plasma-assisted molecular beam epitaxy. The two compounds of primary interest within this research are the ternary films Ni[subscript x]Mg1[subscript x]O and Zn[subscript x]Mg1[subscript x]0 and the investigation focuses predominantly on the realization, assessment and implementation of these two oxides as optoelectronic materials. The functioning hypothesis for this largely experimental effort has been that these cubic ternary oxides can be exploited--and possibly even juxtaposed--to realize novel wide band gap optoelectronic technologies. The results of the research conducted presented herein overwhelmingly support this hypothesis in that they confirm the possibility to grow these films with sufficient quality by this technique, as conjectured. Ni[subscript x]Mg1−[subscript x]O films with varying Nickel concentrations ranging from x = 0 to x = 1 have been grown on lattice matched MgO substrates (lattice mismatch [epsilon][less than]0.01) and characterized structurally, morphologically, optically and electrically. Similarly, cubic Zn[subscript x]Mg1−[subscript x]0 films with Zinc concentrations ranging from x = 0 to x[almost equal to]0.53, as limited by phase segregation, have also been grown and characterized. Photoconductive devices have been designed and fabricated from these films and characterized. Successfully engineered films in both categories exhibit the desired deep ultraviolet photoresponse and therefore verify the hypothesis. While the culminating work of interest here focuses on the two compounds discussed above, the investigation has also involved the characterization or exploitation of related films including hexagonal phase Zn[subscript x]Mg1−[subscript x]O, ZnO, Cd[subscript x]Zn1−[subscript x]O and hybrid structures based on these compounds used in conjunction with GaN. These works were critical precursors to the growth of cubic oxides, however, and are closely relevant. Viewed in its entirety, this document can therefore be considered a multifaceted interrogation of several novel oxide compounds and structures, both cubic and wurtzite in structure. The conclusions of the research can be stated succinctly as a quantifiably successful effort to validate the use of these compounds and structures for wide bandgap optoelectronic technologies.

Download or read book Epitaxial Crystal Growth written by E. Lendvay and published by Trans Tech Publications Ltd. This book was released on 1991-01-01 with total page 979 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 1st International Conference on Epitaxial Crystal Growth, Budapest, Hungary, April 1990