Download or read book Modifying the Aerodynamics of Your Road Car written by Julian Edgar and published by Veloce Publishing. This book was released on 2019-01-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modifying the Aerodynamics of Your Road Car is a unique handbook that assumes no starting knowledge of vehicle aerodynamics. It begins with simple ideas and finishes with sophisticated and effective aerodynamic modifications that work. Three major chapters cover on-road testing techniques that give you all the information you need to decide what modifications you should make - and, after you’ve made them, how well they work. Low-cost techniques allow you to visualize the patterns of airflow over your car so that you can actually see the problem areas that need improvement. Uniquely, you’re also shown how to measure aerodynamic pressures, so you can determine which body surfaces are creating lift, drag and downforce. Want to work out where a wing should be placed? On-road testing to find that out is covered as well. The book also shows you how to measure downforce to see if that wing is actually working! If you wish to reduce drag, more than ten different areas are covered. Reducing frontal area, lowering cooling system drag, optimizing vehicle ride height and rake, reducing the strength of the wake, achieving clean airflow separation and optimizing wheel designs are all covered using the latest research findings. And if you’re a performance driver, there’s a major chapter devoted to reducing lift and improving stability. This chapter includes the design and development of undertrays and diffusers, wings and spoilers. The example car developed measurable downforce when fitted with an undertray and rear diffuser, something that transformed its on-road handling. The author has been writing about the aerodynamics of road cars for more than 25 years. He is also an experienced and proficient car modifier who has performed numerous aerodynamic modifications and upgrades to his own cars. The book’s technical consultant, RH Barnard, is an acknowledged world leading automotive aerodynamicist. If you want a practical, hands-on guide that demystifies and explains car aerodynamics, and shows you how to make effective aerodynamic modifications to your car, this book is for you.

Download or read book Aerodynamics of Road Vehicles written by Wolf-Heinrich Hucho and published by Elsevier. This book was released on 2013-10-22 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerodynamics of Road Vehicles details the aerodynamics of passenger cars, commercial vehicles, sports cars, and race cars; their external flow field; as well as their internal flow field. The book, after giving an introduction to automobile aerodynamics and some fundamentals of fluid mechanics, covers topics such as the performance and aerodynamics of different kinds of vehicles, as well as test techniques for their aerodynamics. The book also covers other concepts related to automobiles such as cooling systems and ventilations for vehicles. The text is recommended for mechanical engineers and phycisists in the automobile industry who would like to understand more about aerodynamics of motor vehicles and its importance on the field of road safety and automobile production.

Download or read book Race Car Aerodynamics written by J Katz and published by Robert Bentley, Incorporated. This book was released on 1996-03-08 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to summarize the secrets of the rapidly developing field of high-speed vehicle design. From F1 to Indy Car, Drag and Sedan racing, this book provides clear explanations for engineers who want to improve their design skills and enthusiasts who simply want to understand how their favorite race cars go fast. Explains how aerodynamics win races, why downforce is more important than streamlining and drag reduction, designing wings and venturis, plus wind tunnel designs and more.

Download or read book Theory and Applications of Aerodynamics for Ground Vehicles written by T Yomi Obidi and published by SAE International. This book was released on 2014-03-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to ground vehicle aerodynamics and methodically guides the reader through the various aspects of the subject. Those needing specific information or a refresher can easily jump to the material of interest. There is a particular emphasis on various vehicle types (passenger cars, trucks, trains, motorcycles, race cars, etc.). However, the book is focused on cars and trucks, which are the most common vehicles in the speed range in which the study of ground vehicle aerodynamics is beneficial. Readers will gain a fundamental understanding of the topic, which will help them design vehicles that have improved aerodynamics; this will lead to better fuel efficiency, improved performance, and increased passenger comfort. The author’s basic approach to the presentation of the material is complemented with review questions, application questions, exercises, and suggested projects at the end of most of the chapters, which helps the reader apply the information presented, either in the classroom or for self-study. Aside from offering a solid understanding of ground vehicle aerodynamics, the book also offers more thorough study of several key topics. One such topic is car-truck interaction, when one vehicle (usually the smaller one) is overtaking the other. There is a direct and instant benefit in terms of safety on the highway from understanding the forces at play when one vehicle passes the other in the same direction and sense. Chapters examine: • Drag • Noise and vehicle soiling • Wind tunnels and road/track testing • Numerical methods • Vehicle stability and control • Vehicle sectional design • Large vehicles: trucks, trailers, buses, trains • Severe service and off-road vehicles • Race cars and convertibles • Motorcycles • Concept vehicles

Download or read book Car Aerodynamic Testing for Road and Track written by Julian Edgar and published by . This book was released on 2020-09-24 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: At last - a book that shows you how to test the aerodynamics of your road or track car. Measure downforce, lift and drag - all with low cost and easily obtained equipment. See airflow behavior, measure aerodynamic pressures causing lift and drag, and measure airflow speed - even under the car. No more guessing, using rules of thumb or just copying what others have done. Develop undertrays and diffusers that work, set wing angles to give the right results, and optimise drag.Practical, down to earth and low in cost, the techniques covered in this book will revolutionize how you modify the aero of your road or track car.

Download or read book Aerodynamics of Road Vehicles written by Thomas Christian Schuetz and published by SAE International. This book was released on 2015-12-30 with total page 1312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The detailed presentation of fundamental aerodynamics principles that influence and improve vehicle design have made Aerodynamics of Road Vehicles the engineer’s “source” for information. This fifth edition features updated and expanded information beyond that which was presented in previous releases. Completely new content covers lateral stability, safety and comfort, wind noise, high performance vehicles, helmets, engine cooling, and computational fluid dynamics. A proven, successful engineering design approach is presented that includes: • Fundamentals of fluid mechanics related to vehicle aerodynamics • Essential experimental results that are the ground rules of fluid mechanics • Design strategies for individual experimental results • General design solutions from combined experimental results The aerodynamics of passenger cars, commercial vehicles, motorcycles, sports cars, and race cars is dealt with in detail, inclusive of systems, testing techniques, measuring and numerical aerodynamics methods and simulations that significantly contribute to vehicle development. Aerodynamics of Road Vehicles is an excellent reference tool and an indispensable source for the industry’s vehicle engineers, designers, and researchers, as well as for enthusiasts, students, and those working in academia or government regulatory agencies.

Download or read book Optimising Car Performance Modifications written by Julian Edgar and published by David and Charles. This book was released on 2022-01-11 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modifying your car for increased performance? You need this book! It shows you how to easily measure on the road the gains and losses of changing air intakes, exhausts, cams and turbos. Also learn how to test suspension, brakes and car aerodynamics - accurately and at low cost.

Download or read book Amateur Car Aerodynamics Sourcebook written by Julian Edgar and published by Createspace Independent Publishing Platform. This book was released on 2013-03-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: At last - a book for those who like to modify the aerodynamics of their road cars!In this book author Julian Edgar explores a host of practical and low-cost techniques that you can do yourself without spending a lot of money or needing special facilities. Section 1 introduces aerodynamic drag and lift. The language is simple and straightforward - but still includes concepts such as drag co-efficients, lift co-efficients and the different types of drag that affect road cars. Section 2 is devoted to aerodynamic testing - directly measuring aerodynamic pressures, and seeing airflow patterns by the use of on-road wool-tuft testing. Section 3, the largest part in the book, covers aerodynamic modification. Fitting vortex generators, testing different undertrays, reducing drag, using turning vanes in intercooler ducting - all are covered in detail. In addition, techniques are described for reducing wind noise, building an effective engine intake that breathes high-pressure cold air, siting bonnet vents in the correct location, and testing airflow through intercoolers. With nearly 300 full-colour photos and diagrams, this book is practical and down to earth - and uses techniques able to be carried out on the road.

Download or read book A Life in Car Design Jaguar Lotus TVR written by Oliver Winterbottom and published by David and Charles. This book was released on 2020-02-04 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gives a unique insight into design and project work for a number of companies in the motor industry. It is aimed at both automobile enthusiasts and to encourage upcoming generations to consider a career in the creative field. Written in historical order, it traces the changes in the car design process over nearly 50 years.

Download or read book How to Make Your Car Handle written by Fred Puhn and published by Penguin. This book was released on 1987-01-01 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: To make your car handle, design a suspension system, or just learn about chassis, you’ll find what you need here. Basic suspension theory is thoroughly covered: roll center, roll axis, camber change, bump steer, anti-dive, ride rate, ride balance and more. How to choose, install and modify suspensions and suspension hardware for best handling: springs, sway bars, shock absorbers, bushings, tired and wheels. Regardless of the basic layout of your car—front engine/rear drive, front engine/front drive, or rear engine/rear drive—it is covered here. Aerodynamic hardware and body modifications for reduced drag, high-speed stability and increased cornering power: spoilers, air dams, wings and ground-effects devices. How to modify and set up brakes for maximum stopping power and handling. The most complete source of handling information available. “Suspension secrets” explained in plain, understandable language so you can be the expert.

Download or read book Encyclopedia of Automotive Engineering written by and published by John Wiley & Sons. This book was released on 2015-03-23 with total page 3888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erstmals eine umfassende und einheitliche Wissensbasis und Grundlage für weiterführende Studien und Forschung im Bereich der Automobiltechnik. Die Encyclopedia of Automotive Engineering ist die erste umfassende und einheitliche Wissensbasis dieses Fachgebiets und legt den Grundstein für weitere Studien und tiefgreifende Forschung. Weitreichende Querverweise und Suchfunktionen ermöglichen erstmals den zentralen Zugriff auf Detailinformationen zu bewährten Branchenstandards und -verfahren. Zusammenhängende Konzepte und Techniken aus Spezialbereichen lassen sich so einfacher verstehen. Neben traditionellen Themen des Fachgebiets beschäftigt sich diese Enzyklopädie auch mit "grünen" Technologien, dem Übergang von der Mechanik zur Elektronik und den Möglichkeiten zur Herstellung sicherer, effizienterer Fahrzeuge unter weltweit unterschiedlichen wirtschaftlichen Rahmenbedingungen. Das Referenzwerk behandelt neun Hauptbereiche: (1) Motoren: Grundlagen; (2) Motoren: Design; (3) Hybrid- und Elektroantriebe; (4) Getriebe- und Antriebssysteme; (5) Chassis-Systeme; (6) Elektrische und elektronische Systeme; (7) Karosserie-Design; (8) Materialien und Fertigung; (9) Telematik. - Zuverlässige Darstellung einer Vielzahl von Spezialthemen aus dem Bereich der Automobiltechnik. - Zugängliches Nachschlagewerk für Jungingenieure und Studenten, die die technologischen Grundlagen besser verstehen und ihre Kenntnisse erweitern möchten. - Wertvolle Verweise auf Detailinformationen und Forschungsergebnisse aus der technischen Literatur. - Entwickelt in Zusammenarbeit mit der FISITA, der Dachorganisation nationaler Automobil-Ingenieur-Verbände aus 37 Ländern und Vertretung von über 185.000 Ingenieuren aus der Branche. - Erhältlich als stets aktuelle Online-Ressource mit umfassenden Suchfunktionen oder als Print-Ausgabe in sechs Bänden mit über 4.000 Seiten. Ein wichtiges Nachschlagewerk für Bibliotheken und Informationszentren in der Industrie, bei Forschungs- und Schulungseinrichtungen, Fachgesellschaften, Regierungsbehörden und allen Ingenieurstudiengängen. Richtet sich an Fachingenieure und Techniker aus der Industrie, Studenten höherer Semester und Studienabsolventen, Forscher, Dozenten und Ausbilder, Branchenanalysen und Forscher.

Download or read book Aerodynamic Drag Mechanisms of Bluff Bodies and Road Vehicles written by Gino Sovran and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings contain the papers and oral discussions presented at the Symposium on AERODYNAMIC DRAG MECHANISMS of Bluff Bodies and Road Vehides held at the General Motors Research Laboratories in Warren, Michigan, on September 27 and 28, 1976. This international, invitational Symposium was the twentieth in an annual series, each one having been in a different technical discipline. The Symposia provide a forum for areas of science and technology that are of timely interest to the Research Laboratories as weIl as the technical community at large, and in which personnel of the Laboratories are actively involved. The Symposia furnish an opportunity for the exchange of ideas and current knowledge between participating research specialists from educational, industrial arid governmental institutions and serve to stimulate future research activity. The present world-wide energy situation makes it highly desirable to reduce the force required to move road vehicles through the atmosphere. A significant amount of the total energy consumed for transportation is expended in overcoming the aerodynamic resistance to motion of these vehicles. Reductions in this aerodynamic drag can therefore have a large impact on ground transportation energy requirements. Although aerodynamic development work on road vehides has been performed for many years, it has not been widely reported or accompanied by much basic research.

Download or read book Art Deco and British Car Design written by Barrie Down and published by Veloce Publishing. This book was released on 2020-02-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Art Deco and British Car Design is a book about automotive styling, in particular the streamlined styling that defined what are now known as Airline cars. During the mid-1930s, the majority of British car manufacturers and coach builders experimented with streamlined styling. This fashion was the result of Art Deco, an international movement that influenced design and marketing in many different industries, and produced some of the most unique and visually exhilarating cars ever produced in Britain. Part One of the book explains and illustrates the Art Deco styling elements that link these streamlined car designs, and describes their development, their commonality, and their unique aeronautical names. The stories of the individual cars, their designers, and their development, are told in Part Two. Here, Barrie Down has collected examples of all the significant British streamlined production cars made between 1933 and 1936, many of them still represented by beautifully restored survivors. The book is well illustrated with over 200 contemporary pictures and colour photographs of existing cars, many of which have never before been published. Art Deco and British Car Design is an instructive and visual feast for all car lovers.

Download or read book Road Vehicle Aerodynamic Design written by R. H. Barnard and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction for students, practising automotive engineers and designers, and anyone with a general interest in the subject. Intended to be affordable by students. Unnecessary details or highly vehicle-specific information has been omitted, but a comprehensive list of references is given, usually with a summary.

Download or read book Competition Car Aerodynamics written by Simon McBeath and published by Haynes Publishing UK. This book was released on 2011-04-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerodynamics is a science in itself, and is one of the most important factors in modern competition car design. This fully updated second edition covers all aspects of aerodynamics, including both downforce and drag. This complex subject is explained in down-to-earth terms, with the aid of numerous illustrations, including color CFD (Computational Fluid Dynamics) diagrams to demonstrate how aerodynamic devices work, as well as wind-tunnel studies.

Download or read book Inspired to Design written by Nigel Bennett and published by Veloce Publishing. This book was released on 2013-12-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The differences between running an Indy car on a road circuit and an oval are covered, as is the struggle to get the best from a car for the Indy 500 - a task which is described with unusual clarity. Nigel also describes the story of the ‘Big Beast’ – the Mercedes pushrod engine that won the 1994 Indy 500. Sharing in detail his own view of the importance of suspension geometry, and how it deviates from present practices, this book also includes personal views on the Penske years from a number of motor sport figures, and those of a rival Indy car designer Bruce Ashmore. A fascinating first-hand behind-the-scenes insight. Included in the story is considerable detail of Nigel’s eight years spent with the Firestone European Racing Division, covering an area vital to racing car performance, plus the relationship between a tyre company and its leading contracted team. The 60s and 70s were rife with tyre wars, and many interesting stories unfolded during those decades. With descriptions of the importance of the Race Engineer to the driver, and to a team’s competitiveness, Nigel Bennett draws on his years of experience to offer detailed insight to how an engineer worked with a car and tuned its set-up in an era before computer readouts and telemetry came to dominate.

Download or read book Competition Car Aerodynamics 3rd Edition written by Simon McBeath and published by Veloce Publishing. This book was released on 2017-03-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of aerodynamics has had an increasingly significant effect on performance enhancement over the past 50 years. Competition Car Aerodynamics 3rd Edition continues the practical, hands-on approach of its popular predecessors to cover all aspects of motorsport aerodynamics, with more CFD and wind tunnel project material and case studies. Author Simon McBeath tackles aerodynamic theory in a comprehensive, yet comprehensible, way with his unprecedented access to state of the art computational fluid dynamics (CFD) techniques. McBeath also explores aerodynamics with the MIRA full-scale wind tunnel in the UK. Photographs, graphs, CFD-generated images, and wind tunnel data--much of which has appeared in the successful Aerobytes series in Racecar Engineering--are used to explain with unrivaled clarity how aerodynamic performance benefits are obtained in practice. With case studies from Formula 1, sports prototypes, Formula 3, GT and saloon cars, club single seaters, and karts, this book will appeal to anyone, whether a designer, competitor, student, or armchair enthusiast, wishing to gain an understanding of aerodynamics, and how it can benefit the performance of all types of competition cars.