Download or read book Polymer Modified Asphalt Binders written by Kenneth R. Wardlaw and published by ASTM International. This book was released on 1992 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: "ASTM Publication Code Number (PCN) 04-011080-08. - "Sponsored by ASTM Committee D-4 on Road and Paving Materials."-- Foreword. - Includes bibliographical references and indexes. - Electronic reproduction; W. Conshohocken, Pa; ASTM International; 2011; Mode of access: World Wide Web; System requirements: Web browser; Access may be restricted to users at subscribing institutions.

Download or read book Modified Asphalt written by Jose Luis Rivera Armenta and published by BoD – Books on Demand. This book was released on 2018-09-19 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt modification is an important area in the development of new road and pavement materials. There is an urgent demand for road materials that can minimize fracture at low temperatures and increase resistance to deformation at high temperatures. The function of asphalt is to bind aggregate to protect it from water and other harmful agents. In the beginning asphalt was ideal for this purpose, but recently traffic loads have increased and environmental factors have deteriorated more rapidly than before. Asphalt is a byproduct of crude oil in the refining process, and it is considered a complex heterogeneous mixture of hydrocarbons. Asphalt modification has become an important research area, using several methods and new materials as modifiers.

Download or read book Polymer Modified Bitumen written by Tony McNally and published by Elsevier. This book was released on 2011-09-15 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The addition of polymers to bitumen allows the modification of certain physical properties, such as softening point, brittleness and ductility, of the bitumen. Polymer modified bitumen: Properties and characterisation provides a valuable and in-depth coverage of the science and technology of polymer modified bitumen.After an initial introduction to bitumen and polymer modified bitumen, the book is divided into two parts. Chapters in part one focus on the preparation and properties of a range of polymer modified bitumen, including polymer bitumen emulsions, modification of bitumen with poly (urethanes), waste rubber and plastic and polypropylene fibres. Part two addresses the characterisation and properties of polymer modified bitumen. Chapter topics covered include rheology, simulated and actual long term ageing studies; the solubility of bituminous binders in fuels and the use of Fourier transform infrared spectroscopy to study ageing/oxidation of polymer modified bitumen.Polymer modified bitumen is an essential reference for scientists and engineers, from both academia and the civil engineering and transport industries, interested in the properties and characterisation of polymer modified bitumen. - Provides a comprehensive and in-depth coverage of the science and technology of polymer modified bitumen - Focuses on the preparation and properties of a range of polymer modified bitumen, including emulsions, modification of bitumen with poly(urethanes), waste rubber and plastic as well as polypropylene fibres - Addresses the characterization and properties of polymer modified bitumen, including rheology, simulated and actual long term ageing studies, and the solubility of bituminous binders in fuels

Download or read book Sustainable Designed Pavement Materials written by Yue Xiao and published by MDPI. This book was released on 2020-12-02 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue “Sustainable Designed Pavement Materials” has been proposed and organized as a means to present recent developments in the field of environmentally-friendly designed pavement materials. For this reason, articles included in this special issue relate to different aspects of pavement materials, from industry solid waste recycling to pavement materials recycling, from pavement materials modification to asphalt performance characterization, from pavement defect detection to pavement maintenance, and from asphalt pavement to cement concrete pavement.

Download or read book Rapra Review Reports written by and published by iSmithers Rapra Publishing. This book was released on with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2023 North Carolina PSI Roofing Contractor Exam Prep written by Upstryve Inc and published by Brown Technical Publications Inc. This book was released on with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get one step closer to becoming a North Carolina Roofing contractor with a prep course designed by 1 Exam Prep to help you conquer the required North Carolina PSI Roofing computer based examination. 1-hour test-taking techniques and practice exams Exams similar to the actual test with hundreds of questions Book overview with Highlight and Tab Assistance

Download or read book Innovative Developments of Advanced Multifunctional Nanocomposites in Civil and Structural Engineering written by Kenneth Loh and published by Woodhead Publishing. This book was released on 2016-02-03 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Developments of Advanced Multifunctional Nanocomposites in Civil and Structural Engineering focuses on nanotechnology, the innovation and control of materials at 100 nm or smaller length scales, and how they have revolutionized almost all of the various disciplines of science and engineering study. In particular, advances in synthesizing, imaging, and manipulating materials at the nano-scale have provided engineers with a broader array of materials and tools for creating high-performance devices. Nanomaterials possess drastically different properties than those of their bulk counterparts mainly because of their high surface-to-mass ratios and high surface energies/reactivity. For instance, carbon nanotubes have been shown to possess impressive mechanical strength, stiffness, and electrical conductivity superior to that of bulk carbon. Whilst nanotechnology has become deeply rooted in electrical, chemical, and materials engineering disciplines, its proliferation into civil engineering did not begin until fairly recently. This book covers that proliferation and the main challenges associated with the integration of nanomaterials and nano-scale design principles into civil and structural engineering. - Examines nanotechnology and its application to not only structural engineering, but also transportation, new infrastructure materials, and the applications of nanotechnology to existing structural systems - Focuses on how nanomaterials can provide enhanced sensing capabilities and mechanical reinforcement of the original structural material - Analyzes experimental and computational work carried out by world-renowned researchers

Download or read book Functional Pavement Design written by Sandra Erkens and published by CRC Press. This book was released on 2016-10-14 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functional Pavement Design is a collections of 186 papers from 27 different countries, which were presented at the 4th Chinese-European Workshops (CEW) on Functional Pavement Design (Delft, the Netherlands, 29 June-1 July 2016). The focus of the CEW series is on field tests, laboratory test methods and advanced analysis techniques, and cover analysis, material development and production, experimental characterization, design and construction of pavements. The main areas covered by the book include: - Flexible pavements - Pavement and bitumen - Pavement performance and LCCA - Pavement structures - Pavements and environment - Pavements and innovation - Rigid pavements - Safety - Traffic engineering Functional Pavement Design is for contributing to the establishment of a new generation of pavement design methodologies in which rational mechanics principles, advanced constitutive models and advanced material characterization techniques shall constitute the backbone of the design process. The book will be much of interest to professionals and academics in pavement engineering and related disciplines.

Download or read book Frontier Research Road and Traffic Engineering written by Teik-Hua Law and published by CRC Press. This book was released on 2022-11-01 with total page 1189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers resulting from the 2020 International Conference on Road and Traffic Engineering (CRTE 2020) covering Road Engineering and Traffic Engineering, aiming to provide an academic and technical communication platform for scholars and engineers engaged in scientific research and engineering practice in the field of Road Engineering and Materials, Traffic Engineering and Management and Transportation Engineering. By sharing the research status of scientific research achievements and cutting-edge technologies, it helps scholars and engineers all over the world to comprehend the academic development trends and broaden research ideas. So as to strengthen international academic research, academic topics exchange and discussion, and promote the industrialization cooperation of academic achievements.

Download or read book Development and Application of Bituminous Materials for Civil Infrastructures written by Hui Yao and published by Frontiers Media SA. This book was released on 2021-10-22 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydraulic and Civil Engineering Technology VII written by M. Yang and published by IOS Press. This book was released on 2022-12-23 with total page 1428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering technology is of crucial importance to the infrastructure on which modern societies depend, and keeping abreast of the latest research and developments in the field is of vital importance. This book presents the proceedings of HCET 2022, the 7th International Technical Conference on Frontiers of Hydraulic and Civil Engineering Technology, originally due to be held, in Sanya, China, from 25-27 September 2022, but instead held as a fully virtual event on Zoom due to continued uncertainty related to the Covid 19 pandemic. HCET is a platform for the dissemination of research results on the latest advances in the areas of hydraulic and civil engineering technology and environmental engineering, and provides an opportunity for scientists, researchers and engineers from around the world to exchange their findings, discuss developments, and possibly establish a basis for collaboration. A total of 275 submissions were received from international contributors, and all were subjected to a rigorous peer-review process, with each paper reviewed by a minimum of two experts. Papers were also checked for quality and plagiarism, after which, 163 papers were accepted for presentation and publication. Topics covered include the research and development of concrete structure design and analysis, structural mechanics and structural engineering, geological exploration and earthquake engineering, building technology, urban planning, energy, environment and advanced engineering science and applications. The book offers a state-of-the-art overview of recent developments, and will be of interest to all those working in the fields of hydraulic and civil engineering technology.

Download or read book Proceedings of the 10th International Conference on Maintenance and Rehabilitation of Pavements written by Paulo Pereira and published by Springer Nature. This book was released on with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiscale Characterization of Advanced Pavement Materials written by Dawei Wang and published by Frontiers Media SA. This book was released on 2023-10-20 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Evaluation of Modified Asphalt Using Chlorinated and Maleated Waste Polymers written by and published by . This book was released on 2002 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt modification using polymeric additives derived from solid wastes, i.e. polyolefins, is reported. Chlorination of polyethylene can be controlled to produce semicrystalline polymeric additives. Differential scanning calorimetry can be used to determine the asphalt crystallinity and the distribution components among phases in asphalt/polymer blends. To enhance the resolution of a given thermogram, a several-step annealing process is required to experimentally realize a near-equilibrium state. Introducing chlorine atoms on polyethylene chains can improve the compatibility of the asphaltlpolymer blends by adjusting the interaction between the components of asphalt and polymer. Maleation of polyolefins at very low levels (one to two percent) is an effective means for enhancing the polarity of the additive without influencing the degree of crystallization.

Download or read book Green and Intelligent Technologies for Sustainable and Smart Asphalt Pavements written by Xueyan Liu and published by CRC Press. This book was released on 2021-12-24 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green and Intelligent Technologies for Sustainable and Smart Asphalt Pavements contains 124 papers from 14 different countries which were presented at the 5th International Symposium on Frontiers of Road and Airport Engineering (IFRAE 2021, Delft, the Netherlands, 12-14 July 2021). The contributions focus on research in the areas of "Circular, Sustainable and Smart Airport and Highway Pavement" and collects the state-of-the-art and state-of-practice areas of long-life and circular materials for sustainable, cost-effective smart airport and highway pavement design and construction. The main areas covered by the book include: • Green and sustainable pavement materials • Recycling technology • Warm & cold mix asphalt materials • Functional pavement design • Self-healing pavement materials • Eco-efficiency pavement materials • Pavement preservation, maintenance and rehabilitation • Smart pavement materials and structures • Safety technology for smart roads • Pavement monitoring and big data analysis • Role of transportation engineering in future pavements Green and Intelligent Technologies for Sustainable and Smart Asphalt Pavements aims at researchers, practitioners, and administrators interested in new materials and innovative technologies for achieving sustainable and renewable pavement materials and design methods, and for those involved or working in the broader field of pavement engineering.

Download or read book Functional Pavement and Advanced Material Testing Technology written by Han-Cheng Dan and published by Frontiers Media SA. This book was released on 2023-02-07 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Uses of Recycled Rubber Tires in Highways written by Jon A. Epps and published by Transportation Research Board. This book was released on 1994 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis on the use of recycled rubber tires in highways will be of interest to administrators and policy-makers; pavement, materials, geotechnical, environmental, and traffic operations engineers; and research engineers involved with highway design and construction issues. Information is provided on the uses of rubber tires in asphalt paving materials as well as other uses, such as on fills and embankments, for erosion control and on railroad grade crossings. Specifically, information is included which identifies the agencies using or implementing applications for recycled rubber tires and defines the design parameters, technical and construction limitations, performance, costs, benefits, environmental limitations, specifications, and availability. This synthesis of information defines the use of recycled rubber tires in highways and is based on a review of nearly 500 references and on information recorded from state highway agency responses to a 1991 survey of practice. Updates are included for as much of the state practice information possible through 1993. The use of scrap tires for highway applications is dynamic with regard to policy and technical issues. Therefore, the reader should keep in mind that the information presented reflects the best available data at a particular time. The synthesis also identifies current research in the topic area, critical research needs, and legislative issues that affect application and use of recycled rubber tires.