Download or read book Modifications of Passive Films written by P. Marcus and published by CRC Press. This book was released on 2023-06-09 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modification of passive films is a promising method of improving the corrosion resistance of metallic materials. As well as reviewing a wide spectrum of film modifications and their effects on passivity and to corrosion resistance, papers presented at this international symposium deal with chemical composition, chemical states and electronic properties of passive films.
Download or read book Modifications of Passive Films written by Paul M. Marcus and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modification of passive films is a promising method of improving the corrosion resistance of metallic materials. As well as reviewing a wide spectrum of film modifications and their effects on passivity and to corrosion resistance, papers presented at this international symposium deal with chemical composition, chemical states and electronic properties of passive films.
Download or read book Modifications of Passive Films written by P. Marcus and published by CRC Press. This book was released on 1994 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Working Party on Surface Science and Mechanisms of Corrosion and Protection The modification of passive films is a promising method of improving the corrosion resistance of metallic materials. As well as reviewing a wide spectrum of film modifications and their effects on passivity and to corrosion resistance, papers presented at this international symposium deal with chemical composition, chemical states and electronic properties of passive films.
Download or read book Modification of Passive Films written by and published by . This book was released on 2001 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Photo induced Modifications of Protective Passive Films written by Amy Rudd and published by . This book was released on 2000 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrochemical Surface Modification written by Richard C. Alkire and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this topical volume, the authors provide in-depth coverage of the vital relationship between electrochemistry and the morphology of thin films and surfaces. Clearly divided into four major sections, the book covers nanoscale dielectric films for electronic devices, superconformal film growth, electrocatalytic properties of transition metal macrocycles, and the use of synchrotron techniques in electrochemistry. All the chapters offer a concise introduction to the relevant topic, as well as supplying numerous references for easy access to further reading and the original literature. The result is must-have reading for electrochemists, physical and surface chemists and physicists, as well as materials scientists and engineers active in the field of spectroscopic methods in electrochemistry.
Download or read book Modified Atmosphere and Active Packaging Technologies written by Ioannis Arvanitoyannis and published by CRC Press. This book was released on 2012-06-12 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many factors are relevant in making the proper choice of food packaging material, including those related to shelf life and biodegradability. To meet these demands, new processing and preservation techniques have arisen, most notably modified atmosphere packaging (MAP) and active packaging (AP). Modified Atmosphere and Active Packaging Technologies presents an overview of the current status of MAP and AP, exploring techniques, methodologies, applications, and relevant legislation. For clarity and easy reference, the book is divided into seven convenient sections: Principles, Materials, Gases, and Machinery for MAP provides a basic overview of the topic and defines modified atmosphere, controlled atmosphere, and active packaging. Safety and Quality Control of MAP Products examines the effect of MAP on various foods and discusses governmental control mechanisms to ensure food safety. Applications of MAP in Foods of Animal Origin explores how MAP can be used in fish, meat, poultry and dairy products. Applications of MAP in Foods of Plant Origin discusses MAP for cereals, minimally processed vegetables, fruits, and bakery products. Other Applications of MAP reviews MAP’s use in ready-to-eat (RTE) foods and coffee, tea, beer, and snack foods. Active Packaging and its New Trends examines issues related to nanotechnology and bioactive packaging. Consumer Behavior/Sensory Analysis and Legislation covers legislation in the European Union, the United States, and Canada and presents conclusions and new issues on the horizon. From the very basics (films, gases, techniques, and applications) up to the latest advances (nanotechnology and bioactive compounds), this book covers nearly all issues related to MAP and AP, providing an essential reference for food scientists and engineers, agriculturalists, chemists, and all those on the cutting edge of food packaging.
Download or read book Proceedings of the Symposium on Corrosion Protection by Coatings and Surface Modification written by Martin W. Kendig and published by . This book was released on 1993 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Mechanisms in Theory and Practice written by Philippe Marcus and published by CRC Press. This book was released on 2011-08-18 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to include recent results from intensive worldwide research efforts in materials science, surface science, and corrosion science, Corrosion Mechanisms in Theory and Practice, Third Edition explores the latest advances in corrosion and protection mechanisms. It presents a detailed account of the chemical and electrochemical surface reactions
Download or read book Marine Corrosion of Stainless Steels written by D. Féron and published by CRC Press. This book was released on 2021-04-14 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is Number 33 of the Marine Corrosion of Stainless Steels, a publication of the European Federation of Corrosion (EFC). Part I of this volume on the "Marine Corrosion of Stainless Steels" consists of five chapters and is concerned with tests that were conducted in the 1990s on the corrosivity of European sea waters (Atlantic, Baltic, English Channel, Mediterranean, and North Sea) towards three types of stainless steels. Results from these two test programmes were presented at a European Workshop on Sea Water Corrosion of Stainless Steels in Trondheim in 1996 and at various corrosion conferences, mostly in Europe. The other four chapters in Part I describe experimental procedures, critical pitting temperature data, crevice corrosion results and results from the MAST biofilm studies. The remaining 23 chapters of the book are concerned with reviews and reports that develop the above topics.
Download or read book Critical Factors in Localized Corrosion 6 in Honor of Professor Shibata written by J. Weidner and published by The Electrochemical Society. This book was released on 2009-08 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers included in this issue of ECS Transactions were originally presented in the symposium ¿Critical Factors in Localized Corrosion 6, in Honor of Professor Shibata¿, held during the PRiME 2008 joint international meeting of The Electrochemical Society and The Electrochemical Society of Japan, with the technical cosponsorship of the Japan Society of Applied Physics, the Korean Electrochemical Society, the Electrochemistry Division of the Royal Australian Chemical Institute, and the Chinese Society of Electrochemistry. This meeting was held in Honolulu, Hawaii, from October 12 to 17, 2008.
Download or read book Laser Surface Modification of Alloys for Corrosion and Erosion Resistance written by C T Kwok and published by Elsevier. This book was released on 2012-03-20 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and erosion processes often occur synergistically to cause serious damage to metal alloys. Laser surface modification techniques such as laser surface melting or alloying are being increasingly used to treat surfaces to prevent corrosion or repair corroded or damaged components. Laser surface modification of alloys for corrosion and erosion resistance reviews the wealth of recent research on these important techniques and their applications. After an introductory overview, part one reviews the use of laser surface melting and other techniques to improve the corrosion resistance of stainless and other steels as well as nickel-titanium and a range of other alloys. Part two covers the use of laser surface modification to prevent different types of erosion, including liquid impingement, slurry (solid particle) and electrical erosion as well as laser remanufacturing of damaged components. With its distinguished editor and international team of contributors, Laser surface modification of alloys for corrosion and erosion resistance is a standard reference for all those concerned with preventing corrosion and erosion damage in metallic components in sectors as diverse as energy production and electrical engineering. Reviews recent research on the use of laser surface modification techniques, including the prevention of corrosion and repair of corroded or damaged components Discusses the techniques for improving the corrosion resistance of steels, nickel-titanium and a range of alloys Analyses the use of laser surface modification to prevent different types of erosion, including liquid impingement and laser remanufacturing of damaged components
Download or read book Surface Modification of Magnesium and its Alloys for Biomedical Applications written by T.S.N. Sankara Narayanan and published by Elsevier. This book was released on 2015-01-30 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of biodegradable implants which can remain in the human body to fix a problem and subsequently dissolve, or be absorbed, consumed or excreted, without warranting a secondary surgery, is very appealing to scientists. Due to their excellent biocompatibility and biodegradability, magnesium implants provide a viable option many problems associated with permanent metallic implants such as, restenosis, thrombosis, permanent physical irritation, and inability to adapt to growth and changes in human body. Volume 2 of this important new book explores practical issues of magnesium and magnesium alloys, physical and mechanical modification and coatings to enhance this material for biomedical applications. Includes expert analysis on chemical solution deposition of hydroxyapatite (HAp) and octacalcium (OCP) phosphate coatings for magnesium Comprehensive coverage of biomimetic modifications, surface functionalization of biomolecules, natural, conducting and biodegradable polymeric coatings Lucid dissection of chemical, physical, mechanical and electromechanical modifications of magnesium and its alloys for biomedical applications
Download or read book Proceedings of the Symposium on Surface Oxide Films written by Jennifer A. Bardwell and published by The Electrochemical Society. This book was released on 1996 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Symposium on Passivity and Its Breakdown written by Paul M. Natishan and published by The Electrochemical Society. This book was released on 1998 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling Aqueous Corrosion written by Kenneth R. Threthewey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: All significant studies agree that aqueous corrosion continues to cost nations dearly in almost every area of technological endeavour. Over the past ten years, microcomputers have facilitated an explosion in the power of modelling as a technique in science and engineering. In corrosion they have enabled better understanding of polarization curves, they have transformed the scope of electrochemical impedance measurements and they have placed a large range of electrochemistry at the fingertips of the corrosion scientist. This book focuses on the models, rather than the computing, which have been made possible during the past decade. Aimed at all those with an interest in corrosion and its control, the book draws together the range of new modelling strands, suggests new avenues of approach and generates further momentum for improvements to corrosion management, whether by increased understanding of atomistic processes or by control of large plant.
Download or read book Surface Modification and Mechanisms written by George E. Totten and published by CRC Press. This book was released on 2004-04-30 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Navigating through an extensive compilation of surface modification reactions and processes for specific tribological results, this reference compiles detailed studies, many not found in other texts, on various residual stresses, reaction processes and mechanisms, heat treatment methods, plasma-based techniques, laser impingement, nanometer scale surface modification, and more. Surface Modification and Mechanisms: Friction, Stress, and Reaction Engineering offers guidelines for the consideration and design of wear and frictional performance and provides a unique understanding of surface structural changes that occur during various engineering procedures.
