Download or read book Modification of Titania with Gold Copper Bimetallic Nanoparticles and Preparation of Copper Based Photocatalysts written by Hai Zibin and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photocatalysis is recently extensively studied because it implies a variety of potential industrial applications ranging from the hydrogen generation of water splitting to the treatment of waste water. Among all the semiconductors, TiO2 has attracted the most attention. But the rate of the electron-hole recombinations is very important and TiO2 is active only under UV light. Various methods are developed to enhance the photoactivity of TiO2. Other semiconductors like copper oxides and copper sulfides also attracted attention due to their lower band-gaps which allow applications in solar photocatalysis. In this work, different kinds of photocatalysts were developed and studied: surface modified TiO2 with metal nanoparticles and copper sulfides and oxides. The nanostructures were characterized by different techniques: HRTEM, SEM, XRD, XPS, HAADF-SEM, and TRMC. Their photocatalytic activity was studied for degradation of model pollutants: phenol, rhodamine B and methyl orange. Different chemical and radiolytic methods have been investigated to modify the surface of TiO2 by mono- and bimetallic (Au, Cu and Au-Cu) nanoparticles in the aim to improve its photocatalytic activity. The best results in term of photocatalytic activity have been obtained with reduction of THPC (tetrakis (hydroxymethyl) phosphonium chloride) and with radiolytic reduction after deposition with urea. Titania surface modification with Au, Cu and bimetallic Au-Cu NPs enables the increase of the photocatalytic activity under UV light. We have found that very small amounts of metal (0.5% wt.) can activate titania for photocatalytic applications, thus the costs of photocatalyst preparation are relatively low. Radiolytic syntheses of non-TiO2 photocatalysts including Cu2O and CuS nanostructures with different morphologies have been developed. The photocatalytic activity of the synthesized photocatalysts has been studied. Truncated octahedral Cu2O exhibit an excellent photocatalytic activity under visible illumination. CuS nanotubes (NTs) exhibit both a high ability to adsorb dyes and a photocatalytic activity under visible light.
Download or read book Microemulsions written by Reza Najjar and published by BoD – Books on Demand. This book was released on 2012-03-16 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly increasing number of applications for microemulsions has kept this relatively old topic still at the top point of research themes. This book provides an assessment of some issues influencing the characteristics and performance of the microemulsions, as well as their main types of applications. In chapter 1 a short introduction about the background, various aspects and applications of microemulsions is given. In Part 2 some experimental and modeling investigations on microstructure and phase behavior of these systems have been discussed. The last two parts of book is devoted to discussion on different types of microemulsion's applications, namely, use in drug delivery, vaccines, oil industry, preparation of nanostructured polymeric, metallic and metal oxides materials for different applications.
Download or read book Nanocatalysis written by Vivek Polshettiwar and published by John Wiley & Sons. This book was released on 2013-09-06 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exhibiting both homogeneous and heterogeneous catalytic properties, nanocatalysts allow for rapid and selective chemical transformations, with the benefits of excellent product yield and ease of catalyst separation and recovery. This book reviews the catalytic performance and the synthesis and characterization of nanocatalysts, examining the current state of the art and pointing the way towards new avenues of research. Moreover, the authors discuss new and emerging applications of nanocatalysts and nanocatalysis, from pharmaceuticals to fine chemicals to renewable energy to biotransformations. Nanocatalysis features contributions from leading research groups around the world. These contributions reflect a thorough review of the current literature as well as the authors’ first-hand experience designing and synthesizing nanocatalysts and developing new applications for them. The book’s nineteen chapters offer a broad perspective, covering: Nanocatalysis for carbon-carbon and carbon-heteroatom coupling reactions Nanocatalysis for various organic transformations in fine chemical synthesis Nanocatalysis for oxidation, hydrogenation, and other related reactions Nanomaterial-based photocatalysis and biocatalysis Nanocatalysts to produce non-conventional energy such as hydrogen and biofuels Nanocatalysts and nano-biocatalysts in the chemical industry Readers will also learn about the latest spectroscopic and microscopy tools used in advanced characterization methods that shed new light on nanocatalysts and nanocatalysis. Moreover, the authors offer expert advice to help readers develop strategies to improve catalytic performance. Summarizing and reviewing all the most important advances in nanocatalysis over the last two decades, this book explains the many advantages of nanocatalysts over conventional homogeneous and heterogeneous catalysts, providing the information and guidance needed for designing green, sustainable catalytic processes.
Download or read book Recent Progress in Antimicrobial Nanomaterials written by Ana María Díez-Pascual and published by MDPI. This book was released on 2021-01-20 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a fundamental understanding of the interaction between bacteria and nanomaterials, this book highlights the latest research on the antimicrobial properties of nanomaterials and provides an invaluable blueprint for improving the antimicrobial performance of devices and products. This book introduces the reader to the progress being made in the field, followed by an outline of applications in different areas. Various methods and techniques of synthesis and characterization are detailed. The content provides insight into the ongoing research, current trends, and technical challenges in this rapidly progressing field. Therefore, this book is highly suitable for materials scientists, engineers, biologists, and technologists.
Download or read book Design of Advanced Photocatalytic Materials for Energy and Environmental Applications written by Juan M. Coronado and published by Springer Science & Business Media. This book was released on 2013-05-27 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research for the development of more efficient photocatalysts has experienced an almost exponential growth since its popularization in early 1970’s. Despite the advantages of the widely used TiO2, the yield of the conversion of sun power into chemical energy that can be achieved with this material is limited prompting the research and development of a number of structural, morphological and chemical modifications of TiO2 , as well as a number of novel photocatalysts with very different composition. Design of Advanced Photocatalytic Materials for Energy and Environmental Applications provides a systematic account of the current understanding of the relationships between the physicochemical properties of the catalysts and photoactivity. The already long list of photocatalysts phases and their modifications is increasing day by day. By approaching this field from a material sciences angle, an integrated view allows readers to consider the diversity of photocatalysts globally and in connection with other technologies. Design of Advanced Photocatalytic Materials for Energy and Environmental Applications provides a valuable road-map, outlining the common principles lying behind the diversity of materials, but also delimiting the imprecise border between the contrasted results and the most speculative studies. This broad approach makes it ideal for specialist but also for engineers, researchers and students in related fields.
Download or read book Synthesis and Applications of Gold and Gold copper Alloy Nanoparticles written by Nathan E. Motl and published by . This book was released on 2012 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanostructured Materials for Energy Related Applications written by Saravanan Rajendran and published by Springer. This book was released on 2019-02-11 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the role and fundamental aspects of the diverse ranges of nanostructured materials for energy applications in a comprehensive manner. Advanced nanomaterial is an important and interdisciplinary field which includes science and technology. This work thus gives the reader an in depth analysis focussed on particular nanomaterials and systems applicable for technologies such as clean fuel, hydrogen generation, absorption and storage, supercapacitors, battery applications and more. Furthermore, it not only aims to exploit certain nanomaterials for technology transfer, but also exploits a wide knowledge on avenues such as biomass-derived nanomaterials, carbon dioxide conversions into renewable fuel chemicals using nanomaterials. These are the areas with lacunae that demand more research and application.
Download or read book Green Photocatalytic Semiconductors written by Seema Garg and published by Springer Nature. This book was released on 2021-09-20 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a detailed overview on the role of photocatalysts for environmental remediation, hydrogen production and carbon dioxide reduction. Effective ways to enhance the photocatalytic activity of the material via doping, hybrid material, laser light and nanocomposites have been discussed in this book. The book also further elaborates the role of metal nanoparticles, rare earth doping, sensitizers, surface oxygen vacancy, interface engineering and band gap engineering for enhancing the photocatalytic activity. An approach to recover the photocatalytic material via immobilization is also presented. This book brings to light much of the recent research in the development of such semiconductor photocatalytic systems. The book will thus be of relevance to researchers in the field of: material science, environmental science & technology, photocatalytic applications, newer methods of energy generation & conversion and industrial applications.
Download or read book The Role of Catalysis for the Sustainable Production of Bio fuels and Bio chemicals written by Kostas Triantafyllidis and published by Newnes. This book was released on 2013-03-19 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Role of Catalysis for the Sustainable Production of Bio-fuels and Bio-chemicals describes the importance of catalysis for the sustainable production of biofuels and biochemicals, focused primarily on the state-of-the-art catalysts and catalytic processes expected to play a decisive role in the "green" production of fuels and chemicals from biomass. In addition, the book includes general elements regarding the entire chain of biomass production, conversion, environment, economy, and life-cycle assessment. Very few books are available on catalysis in production schemes using biomass or its primary conversion products, such as bio-oil and lignin. This book fills that gap with detailed discussions of: Catalytic pyrolysis of lignocellulosic biomass Hybrid biogasoline by co-processing in FCC units Fischer-Tropsch synthesis to biofuels (biomass-to-liquid process) Steam reforming of bio-oils to hydrogen With energy prices rapidly rising, environmental concerns growing, and regulatory apparatus evolving, this book is a resource with tutorial, research, and technological value for chemists, chemical engineers, policymakers, and students. Includes catalytic reaction mechanism schemes and gives a clear understanding of catalytic processes Includes flow diagrams of bench-, pilot- and industrial-scale catalytic processing units and demonstrates the various process technologies involved, enabling easy selection of the best process Incorporates many tables, enabling easy comparison of data based on a critical review of the available literature
Download or read book Titanium Dioxide written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2018-06-27 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide is currently being used in many industrial products. It provides unique photocatalytic properties for water splitting and purification, bacterial inactivation, and organics degradation. It has also been widely used as the photoanode for dye-sensitized solar cells and coatings for self-cleaning surfaces, biomedical implants, and nanomedicine. This book covers various aspects of titanium dioxide nanomaterials including their unique one-dimensional, two-dimensional, mesoporous, and hierarchical nanostructures and their synthetic methods such as sol-gel, hydrothermal, anodic oxidation, and electrophoretic deposition, as well as its key applications in environmental and energy sectors. Through these 24 chapters written by experts from the international scientific community, readers will have access to a comprehensive overview of the recent research and development findings on the titanium dioxide nanomaterials.
Download or read book Microemulsion Systems written by Henri L. Rosano and published by CRC Press. This book was released on 1987-03-27 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Green Carbon Dioxide written by Gabriele Centi and published by John Wiley & Sons. This book was released on 2014-01-17 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: PROMISING NEW APPROACHES TO RECYCLE CARBON DIOXIDE AND REDUCE EMISSIONS With this book as their guide, readers will learn a variety of new approaches and methods to recycle and reuse carbon dioxide (CO2) in order to produce green fuels and chemicals and, at the same time, minimize CO2 emissions. The authors demonstrate how to convert CO2 into a broad range of essential products by using alternative green energy sources, such as solar, wind, and hydro-power as well as sustainable energy sources. Readers will discover that CO2 can be a driving force for the sustainable future of both the chemical industry and the energy and fuels industry. Green Carbon Dioxide features a team of expert authors, offering perspectives on the latest breakthroughs in CO2 recycling from Asia, Europe, and North America. The book begins with an introduction to the production of CO2-based fuels and chemicals. Next, it covers such topics as: Transformation of CO2 to useable products through free-radical-induced reactions Hydrogenation of CO2 to liquid fuels Direct synthesis of organic carbonates from CO2 and alcohols using heterogeneous oxide catalysts Electrocatalytic reduction of CO2 in methanol medium Fuel production from photocatalytic reduction of CO2 with water using TiO2-based nanocomposites Use of CO2 in enhanced oil recovery and carbon capture and sequestration More than 1,000 references enable readers to explore individual topics in greater depth. Green Carbon Dioxide offers engineers, chemists, and managers in the chemical and energy and fuel industries a remarkable new perspective, demonstrating how CO2 can play a significant role in the development of a sustainable Earth.
Download or read book Multifunctional Nanocomposites for Energy and Environmental Applications written by Zhanhu Guo and published by John Wiley & Sons. This book was released on 2018-01-02 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses klar strukturierte Fachbuch legt den Schwerpunkt auf praktische Anwendungen von Nanokompositen und Nanotechnologien im Rahmen einer nachhaltigen Entwicklung. Es zeigt, wie Nanokomposite zur Lösung von Energie- und Umweltproblemen beitragen können, bietet zusätzlich einen breiten Überblick über Anwendungen im Energiebereich und behandelt eine einzigartige Auswahl an Umweltthemen. Der erste Teil beschäftigt sich mit Anwendungen wie Lithium-Ionen-Batterien, Solarzellen, Katalyse, Gewinnung von Wärme und Energie aus Abfällen mithilfe der Thermoelektrizität und Wasserspaltung. Der zweite Teil beleuchtet in einzigartiger Weise ökologische Themen, darunter Atommüllmanagement sowie die Abscheidung und Speicherung von Kohlendioxid. Dieses Fachbuch vermittelt auf erfolgreiche Weise Grundlagenwissen für Einsteiger als auch die neuesten Erkenntnisse für erfahrene Wissenschaftler, Ingenieure und Forscher aus der Industrie.
Download or read book Homogeneous Gold Catalysis written by LeGrande M. Slaughter and published by Springer. This book was released on 2015-03-30 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Current Chemistry presents critical reviews of the present and future trends in modern chemical research. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field. Review articles for the individual volumes are invited by the volume editors. Readership: research chemists at universities or in industry, graduate students.
Download or read book Photo and Electro Catalytic Processes written by Jianmin Ma and published by John Wiley & Sons. This book was released on 2022-01-25 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore green catalytic reactions with this reference from a renowned leader in the field Green reactions—like photo-, photoelectro-, and electro-catalytic reactions—offer viable technologies to solve difficult problems without significant damage to the environment. In particular, some gas-involved reactions are especially useful in the creation of liquid fuels and cost-effective products. In Photo- and Electro-Catalytic Processes: Water Splitting, N2 Fixing, CO2 Reduction, award-winning researcher Jianmin Ma delivers a comprehensive overview of photo-, electro-, and photoelectron-catalysts in a variety of processes, including O2 reduction, CO2 reduction, N2 reduction, H2 production, water oxidation, oxygen evolution, and hydrogen evolution. The book offers detailed information on the underlying mechanisms, costs, and synthetic methods of catalysts. Filled with authoritative and critical information on green catalytic processes that promise to answer many of our most pressing energy and environmental questions, this book also includes: Thorough introductions to electrocatalytic oxygen reduction and evolution reactions, as well as electrocatalytic hydrogen evolution reactions Comprehensive explorations of electrocatalytic water splitting, CO2 reduction, and N2 reduction Practical discussions of photoelectrocatalytic H2 production, water splitting, and CO2 reduction In-depth examinations of photoelectrochemical oxygen evolution and nitrogen reduction Perfect for catalytic chemists and photochemists, Photo- and Electro-Catalytic Processes: Water Splitting, N2 Fixing, CO2 Reduction also belongs in the libraries of materials scientists and inorganic chemists seeking a one-stop resource on the novel aspects of photo-, electro-, and photoelectro-catalytic reactions.
Download or read book Recent Applications in Sol Gel Synthesis written by Usha Chandra and published by BoD – Books on Demand. This book was released on 2017-07-05 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Versatility, extended compositional ranges, better homogeneity, lesser energy consumption, and requirement of nonexpensive equipments have boosted the use of sol-gel process on top of the popularity in the synthesis of nanosystems. The sol-gel technique has not only revolutionized oxide ceramics industry and/or material science but has also extended widely into multidimensional applications. The book Recent Applications in Sol-Gel Synthesis comprises 14 chapters that deal mainly with the application-oriented aspects of the technique. Sol-gel prepared metal oxide (MO) nanostructures like nanospheres, nanorods, nanoflakes, nanotubes, and nanoribbons have been employed in biomedical applications involving drug deliveries, mimicking of natural bone, and antimicrobial activities. The possibility of controlling grain size in aerogel and preparation of ultrahigh-temperature ceramic (UHTC)-based materials, fluorescent glasses, ultraviolet photosensors, and photocatalysts have been discussed in detail by the experts in the field. The usefulness of sol-gel materials as active GRIN, as textile finisher, and as leather modifier with water-repellent and oil-resistive properties would be an incentive for researchers keen to pursue the field.
Download or read book Modified Cyclodextrins Scaffolds And Templates For Supramolecular Chemistry written by Chris J Easton and published by World Scientific. This book was released on 1999-04-29 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through modification, the natural cyclodextrins are effective templates for the generation of a wide range of molecular hosts. This makes it possible to tailor a cyclodextrin host to a particular guest, to meet specific requirements in the host-guest complex, and opens the way to diverse new areas of supramolecular chemistry. Metallocyclodextrins, rotaxanes and catenanes, as well as surface monolayers of modified cyclodextrins, are readily obtained. The native cyclodextrins serve as scaffolds on which functional groups and other substituents can be assembled, with controlled geometry. This results in substantially improved molecular recognition and procedures for chemical separation, including enantiomer discrimination, through guest binding. Access to the gamut of functional groups greatly expands the utility of cyclodextrins in chemical synthesis and provides catalysts which mimic the entire range of enzymic activity. Modifications to the cyclodextrins also lead to a wide range of photochemistry of cyclodextrin complexes, through which the enhancement of guest reactivity occurs; in addition, light harvesting molecular devices and photochemical frequency switches may be constructed. In solution, modified cyclodextrins have been used to construct molecular reactors, as well as molecular, temperature and pH sensors. At surfaces, they form semipermeable membranes and sensor electrodes. Such exciting fields of chemistry, made possible only through modifications to the natural cyclodextrins, are the subject of this book.
