Download or read book Sliding Modes in Control and Optimization written by Vadim I. Utkin and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to systems with discontinuous control. The study of discontinuous dynamic systems is a multifacet problem which embraces mathematical, control theoretic and application aspects. Times and again, this problem has been approached by mathematicians, physicists and engineers, each profession treating it from its own positions. Interestingly, the results obtained by specialists in different disciplines have almost always had a significant effect upon the development of the control theory. It suffices to mention works on the theory of oscillations of discontinuous nonlinear systems, mathematical studies in ordinary differential equations with discontinuous righthand parts or variational problems in nonclassic statements. The unremitting interest to discontinuous control systems enhanced by their effective application to solution of problems most diverse in their physical nature and functional purpose is, in the author's opinion, a cogent argument in favour of the importance of this area of studies. It seems a useful effort to consider, from a control theoretic viewpoint, the mathematical and application aspects of the theory of discontinuous dynamic systems and determine their place within the scope of the present-day control theory. The first attempt was made by the author in 1975-1976 in his course on "The Theory of Discontinuous Dynamic Systems" and "The Theory of Variable Structure Systems" read to post-graduates at the University of Illinois, USA, and then presented in 1978-1979 at the seminars held in the Laboratory of Systems with Discontinous Control at the Institute of Control Sciences in Moscow.

Download or read book Recent Advances in Sliding Modes From Control to Intelligent Mechatronics written by Xinghuo Yu and published by Springer. This book was released on 2015-04-10 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is dedicated to Professor Okyay Kaynak to commemorate his life time impactful research and scholarly achievements and outstanding services to profession. The 21 invited chapters have been written by leading researchers who, in the past, have had association with Professor Kaynak as either his students and associates or colleagues and collaborators. The focal theme of the volume is the Sliding Modes covering a broad scope of topics from theoretical investigations to their significant applications from Control to Intelligent Mechatronics.

Download or read book Sliding Mode Control and Observation written by Yuri Shtessel and published by Springer Science & Business Media. This book was released on 2013-06-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sliding mode control methodology has proven effective in dealing with complex dynamical systems affected by disturbances, uncertainties and unmodeled dynamics. Robust control technology based on this methodology has been applied to many real-world problems, especially in the areas of aerospace control, electric power systems, electromechanical systems, and robotics. Sliding Mode Control and Observation represents the first textbook that starts with classical sliding mode control techniques and progresses toward newly developed higher-order sliding mode control and observation algorithms and their applications. The present volume addresses a range of sliding mode control issues, including: *Conventional sliding mode controller and observer design *Second-order sliding mode controllers and differentiators *Frequency domain analysis of conventional and second-order sliding mode controllers *Higher-order sliding mode controllers and differentiators *Higher-order sliding mode observers *Sliding mode disturbance observer based control *Numerous applications, including reusable launch vehicle and satellite formation control, blood glucose regulation, and car steering control are used as case studies Sliding Mode Control and Observation is aimed at graduate students with a basic knowledge of classical control theory and some knowledge of state-space methods and nonlinear systems, while being of interest to a wider audience of graduate students in electrical/mechanical/aerospace engineering and applied mathematics, as well as researchers in electrical, computer, chemical, civil, mechanical, aeronautical, and industrial engineering, applied mathematicians, control engineers, and physicists. Sliding Mode Control and Observation provides the necessary tools for graduate students, researchers and engineers to robustly control complex and uncertain nonlinear dynamical systems. Exercises provided at the end of each chapter make this an ideal text for an advanced course taught in control theory.

Download or read book A Real Time Approach to Process Control written by William Y. Svrcek and published by John Wiley & Sons. This book was released on 2013-03-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Real- Time Approach to Process Control provides the reader with both a theoretical and practical introduction to this increasingly important approach. Assuming no prior knowledge of the subject, this text introduces all of the applied fundamentals of process control from instrumentation to process dynamics, PID loops and tuning, to distillation, multi-loop and plant-wide control. In addition, readers come away with a working knowledge of the three most popular dynamic simulation packages. The text carefully balances theory and practice by offering readings and lecture materials along with hands-on workshops that provide a 'virtual' process on which to experiment and from which to learn modern, real time control strategy development. As well as a general updating of the book specific changes include: A new section on boiler control in the chapter on common control loops A major rewrite of the chapters on distillation column control and multiple single-loop control schemes The addition of new figures throughout the text Workshop instructions will be altered to suit the latest versions of HYSYS, ASPEN and DYNSIM simulation software A new solutions manual for the workshop problems

Download or read book Fault Detection and Fault Tolerant Control Using Sliding Modes written by Halim Alwi and published by Springer Science & Business Media. This book was released on 2011-06-07 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Detection and Fault-tolerant Control Using Sliding Modes is the first text dedicated to showing the latest developments in the use of sliding-mode concepts for fault detection and isolation (FDI) and fault-tolerant control in dynamical engineering systems. It begins with an introduction to the basic concepts of sliding modes to provide a background to the field. This is followed by chapters that describe the use and design of sliding-mode observers for FDI using robust fault reconstruction. The development of a class of sliding-mode observers is described from first principles through to the latest schemes that circumvent minimum-phase and relative-degree conditions. Recent developments have shown that the field of fault tolerant control is a natural application of the well-known robustness properties of sliding-mode control. A family of sliding-mode control designs incorporating control allocation, which can deal with actuator failures directly by exploiting redundancy, is presented. Various realistic case studies, specifically highlighting aircraft systems and including results from the implementation of these designs on a motion flight simulator, are described. A reference and guide for researchers in fault detection and fault-tolerant control, this book will also be of interest to graduate students working with nonlinear systems and with sliding modes in particular. Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Download or read book Feedback Control Theory written by John C. Doyle and published by Courier Corporation. This book was released on 2013-04-09 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent introduction to feedback control system design, this book offers a theoretical approach that captures the essential issues and can be applied to a wide range of practical problems. Its explorations of recent developments in the field emphasize the relationship of new procedures to classical control theory, with a focus on single input and output systems that keeps concepts accessible to students with limited backgrounds. The text is geared toward a single-semester senior course or a graduate-level class for students of electrical engineering. The opening chapters constitute a basic treatment of feedback design. Topics include a detailed formulation of the control design program, the fundamental issue of performance/stability robustness tradeoff, and the graphical design technique of loopshaping. Subsequent chapters extend the discussion of the loopshaping technique and connect it with notions of optimality. Concluding chapters examine controller design via optimization, offering a mathematical approach that is useful for multivariable systems.

Download or read book Advances in Sliding Mode Control written by B Bandyopadhyay and published by Springer. This book was released on 2013-03-15 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sliding mode control paradigm has become a mature technique for the design of robust controllers for a wide class of systems including nonlinear, uncertain and time-delayed systems. This book is a collection of plenary and invited talks delivered at the 12th IEEE International Workshop on Variable Structure System held at the Indian Institute of Technology, Mumbai, India in January 2012. After the workshop, these researchers were invited to develop book chapters for this edited collection in order to reflect the latest results and open research questions in the area. The contributed chapters have been organized by the editors to reflect the various themes of sliding mode control which are the current areas of theoretical research and applications focus; namely articulation of the fundamental underpinning theory of the sliding mode design paradigm, sliding modes for decentralized system representations, control of time-delay systems, the higher order sliding mode concept, results applicable to nonlinear and underactuated systems, sliding mode observers, discrete sliding mode control together with cutting edge research contributions in the application of the sliding mode concept to real world problems. This book provides the reader with a clear and complete picture of the current trends in Variable Structure Systems and Sliding Mode Control Theory.

Download or read book Fault Tolerant Control Schemes Using Integral Sliding Modes written by Mirza Tariq Hamayun and published by Springer. This book was released on 2016-04-29 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The key attribute of a Fault Tolerant Control (FTC) system is its ability to maintain overall system stability and acceptable performance in the face of faults and failures within the feedback system. In this book Integral Sliding Mode (ISM) Control Allocation (CA) schemes for FTC are described, which have the potential to maintain close to nominal fault-free performance (for the entire system response), in the face of actuator faults and even complete failures of certain actuators. Broadly an ISM controller based around a model of the plant with the aim of creating a nonlinear fault tolerant feedback controller whose closed-loop performance is established during the design process. The second approach involves retro-fitting an ISM scheme to an existing feedback controller to introduce fault tolerance. This may be advantageous from an industrial perspective, because fault tolerance can be introduced without changing the existing control loops. A high fidelity benchmark model of a large transport aircraft is used to demonstrate the efficacy of the FTC schemes. In particular a scheme based on an LPV representation has been implemented and tested on a motion flight simulator.

Download or read book Sliding Mode Control in Electro Mechanical Systems written by Vadim Utkin and published by CRC Press. This book was released on 2017-12-19 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Apply Sliding Mode Theory to Solve Control Problems Interest in SMC has grown rapidly since the first edition of this book was published. This second edition includes new results that have been achieved in SMC throughout the past decade relating to both control design methodology and applications. In that time, Sliding Mode Control (SMC) has continued to gain increasing importance as a universal design tool for the robust control of linear and nonlinear electro-mechanical systems. Its strengths result from its simple, flexible, and highly cost-effective approach to design and implementation. Most importantly, SMC promotes inherent order reduction and allows for the direct incorporation of robustness against system uncertainties and disturbances. These qualities lead to dramatic improvements in stability and help enable the design of high-performance control systems at low cost. Written by three of the most respected experts in the field, including one of its originators, this updated edition of Sliding Mode Control in Electro-Mechanical Systems reflects developments in the field over the past decade. It builds on the solid fundamentals presented in the first edition to promote a deeper understanding of the conventional SMC methodology, and it examines new design principles in order to broaden the application potential of SMC. SMC is particularly useful for the design of electromechanical systems because of its discontinuous structure. In fact, where the hardware of many electromechanical systems (such as electric motors) prescribes discontinuous inputs, SMC becomes the natural choice for direct implementation. This book provides a unique combination of theory, implementation issues, and examples of real-life applications reflective of the authors’ own industry-leading work in the development of robotics, automobiles, and other technological breakthroughs.

Download or read book Sliding Mode Control written by Andrzej Bartoszewicz and published by BoD – Books on Demand. This book was released on 2011-04-11 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this monograph is to present a broad range of well worked out, recent application studies as well as theoretical contributions in the field of sliding mode control system analysis and design. The contributions presented here include new theoretical developments as well as successful applications of variable structure controllers primarily in the field of power electronics, electric drives and motion steering systems. They enrich the current state of the art, and motivate and encourage new ideas and solutions in the sliding mode control area.

Download or read book Sliding Modes after the first Decade of the 21st Century written by Leonid Fridman and published by Springer. This book was released on 2011-09-28 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the newest results of the major world research groups working in the area of Variable Structure Systems and Sliding Mode Control (VSS/SMC). The research activity of these groups is coordinated by the IEEE Technical Committee on Variable Structure Systems (VSS) and Sliding Modes (SM). The presented results include the reports of the research groups collaborating in a framework of the Unión European Union – México project of Fondo de Cooperación Internacional en Ciencia y Tecnología (FONCICyT) 93302 titled "Automatization and Monitoring of Energy Production Processes via Sliding Mode Control". The book starts with the overview of the sliding mode control concepts and algorithms that were developed and discussed in the last two decades The research papers are combined in three sections: Part I: VSS and SM Algorithms and their Analysis Part II: SMC Design Part III: Applications of VSS and SMC The book will be of interests of engineers, researchers and graduate students working in the area of the control systems design. Novel mathematical theories and engineering concepts of control systems are rigorously discussed and supported by numerous applications to practical tasks.

Download or read book Sliding Mode Control In Engineering written by Wilfrid Perruquetti and published by CRC Press. This book was released on 2002-01-29 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of the most recent developments in the theory of non-Archimedean pseudo-differential equations and its application to stochastics and mathematical physics--offering current methods of construction for stochastic processes in the field of p-adic numbers and related structures. Develops a new theory for parabolic equat

Download or read book Variable Structure Systems written by Asif Sabanovic and published by IET. This book was released on 2004-10-08 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book fulfils the definite need for an accessible book on variable structure systems and also provides the very latest results in research on this topic. Divided into three parts - basics of sliding mode control, new trends in sliding mode control, and applications of sliding mode control - the book contains many numerical design examples, so that readers can quickly understand the design methodologies and their applications to practical problems. Primarily aimed at students and researchers in the field, the book will also be useful for practising control engineers.

Download or read book Control Aspects of Prosthetics and Orthotics written by R. M. Campbell and published by Elsevier. This book was released on 2014-05-23 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Aspects of Prosthetics and Orthotics covers the proceedings of the International Federation of Automatic Control (IFAC) Symposium that tackles issues relating to the control systems of prosthetics and orthotics device. The book organizes topics according to the sessions of the symposium. Session 1 deals with the functional muscle and nerve simulation, while Session 2 discusses the man-machine mechanical and information interface. The third session covers sensory replacement and artificial organs, while the fourth session tackles instrumentation, medical devices, and clinical procedures. The last session discusses robotics and mechanics. The text will be of great interest to physicians, physical therapists, orthotists, and prosthetists, whose line of work involves prosthetics and orthotics systems.

Download or read book Sliding Mode Control of PEM Fuel Cells written by Cristian Kunusch and published by Springer Science & Business Media. This book was released on 2012-01-15 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sliding-mode Control of PEM Fuel Cells demonstrates the application of higher-order sliding-mode control to PEMFC dynamics showing the advantages of sliding modes. The book introduces the theory of fuel cells and sliding-mode control. It contextualises PEMFCs both in terms of their development and within the hydrogen economy and today’s energy production situation as a whole. It then discusses fuel-cell operation principles, the mathematical background of high-order sliding-mode control and to a feasibility study for the use of sliding modes in the control of an automotive fuel stack. Part II presents experimental results of sliding-mode-control application to laboratory fuel cells and deals with subsystem-based modelling, detailed design, and observability and controllability. Simulation results are contrasted with empirical data and performance, robustness and implementation issues are treated in depth. Possibilities for future research are also laid out.

Download or read book Discrete time sliding mode control strategies applied to a multiphase brushless DC machine written by Godoi Dias, Milena Sabrina and published by kassel university press GmbH. This book was released on 2017 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, environmental issues motivates the replacement of mechanical, hydraulic and pneumatic system by electrical system in the transport sector aiming to reduce emissions generated by burning of fossil fuels in vehicles. The electrical system must ensure high electrical efficiency and should not exceed the weight of the substituted components. To attend these high performance requirements a fault-tolerant multiphase brushless DC machine was chosen for this research. The present work introduces a six-phase 600W brushless DC machine with 8 poles. The main challenge for the control issues of this machine is the mutual magnetic coupling between the phases due to the wave winding machine configuration. In this context, theoretical and practical investigations of different current control strategies based on the sliding mode control approach applied to the six-phase brushless DC machine are presented.

Download or read book Applications of Sliding Mode Control written by Nabil Derbel and published by Springer. This book was released on 2016-10-14 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents essential studies and applications in the context of sliding mode control, highlighting the latest findings from interdisciplinary theoretical studies, ranging from computational algorithm development to representative applications. Readers will learn how to easily tailor the techniques to accommodate their ad hoc applications. To make the content as accessible as possible, the book employs a clear route in each paper, moving from background to motivation, to quantitative development (equations), and lastly to case studies/illustrations/tutorials (simulations, experiences, curves, tables, etc.). Though primarily intended for graduate students, professors and researchers from related fields, the book will also benefit engineers and scientists from industry.