Download or read book Modern Problems of Robotics written by Arkady Yuschenko and published by Springer Nature. This book was released on 2021-10-08 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the post-conference proceedings of the 2nd International Conference on Modern Problems of Robotics, MPoR 2020, held in Moscow, Russia, in March 2020. The 16 revised full papers were carefully reviewed and selected from 21 submissions. The volume includes the following topical sections: Collaborative Robotic Systems, Robotic Systems Design and Simulation, and Robots Control. The papers are devoted to the most interesting today’s investigations in Robotics, such as the problems of the human–robot interaction, the problems of robot design and simulation, and the problems of robot and robotic complexes control.
Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.
Download or read book Modern Problems of Robotics written by Arkady Yuschenko and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the post-conference proceedings of the 2nd International Conference on Modern Problems of Robotics, MPoR 2020, held in Moscow, Russia, in March 2020. The 16 revised full papers were carefully reviewed and selected from 21 submissions. The volume includes the following topical sections: Collaborative Robotic Systems, Robotic Systems Design and Simulation, and Robots Control. The papers are devoted to the most interesting today's investigations in Robotics, such as the problems of the human-robot interaction, the problems of robot design and simulation, and the problems of robot and robotic complexes control. .
Download or read book Living with Robots written by Ruth Aylett and published by MIT Press. This book was released on 2021-09-21 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The truth about robots: two experts look beyond the hype, offering a lively and accessible guide to what robots can (and can't) do. There’s a lot of hype about robots; some of it is scary and some of it utopian. In this accessible book, two robotics experts reveal the truth about what robots can and can’t do, how they work, and what we can reasonably expect their future capabilities to be. It will not only make you think differently about the capabilities of robots; it will make you think differently about the capabilities of humans. Ruth Aylett and Patricia Vargas discuss the history of our fascination with robots—from chatbots and prosthetics to autonomous cars and robot swarms. They show us the ways in which robots outperform humans and the ways they fall woefully short of our superior talents. They explain how robots see, feel, hear, think, and learn; describe how robots can cooperate; and consider robots as pets, butlers, and companions. Finally, they look at robots that raise ethical and social issues: killer robots, sexbots, and robots that might be gunning for your job. Living with Robots equips readers to look at robots concretely—as human-made artifacts rather than placeholders for our anxieties. Find out: •Why robots can swim and fly but find it difficult to walk •Which robot features are inspired by animals and insects •Why we develop feelings for robots •Which human abilities are hard for robots to emulate
Download or read book Modern Robotics written by Julian Evans and published by Larsen and Keller Education. This book was released on 2019-06-27 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of robotics is involved in the design, construction and use of robots and their control systems. These are developed with the objective of minimizing human effort or substituting for humans in environments, which are dangerous for human survival such as bomb detection and deactivation, in space, etc. Robotics integrates the techniques of electrical engineering, artificial intelligence, mechanical engineering, etc. for the conception, operation and manufacture of robots. Some common areas where robots are being used include medicine, surgery, military, and manufacturing, where efficiency and precision is of the utmost essence. The components of a robot are a power source, actuators, sensors and manipulators. Solar, nuclear and hydraulic power can be used to drive a robot. This book elucidates the concepts and innovative models around prospective developments in the field of robotics in the modern scenario. Some of the diverse topics covered in this book address the mechanics, systems and control of robotic systems. It aims to serve as a resource guide for students and experts alike and contribute to the growth of the disciplines.
Download or read book Industrial robots and cobots written by Michał Gurgul and published by Michał Gurgul. This book was released on 2018-12-08 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the modern world, highly repetitive and tiresome tasks are being delegated to machines. The demand for industrial robots is growing not only because of the need to improve production efficiency and the quality of the end products, but also due to rising employment costs and a shortage of skilled professionals. The industrial robot market is projected to grow by 16% year-on-year in the immediate future. The industry’s progressing automation is increasing the demand for specialists who can operate robots. If you would like to join this sought-after and well-paid professional group, it’s time to learn how to operate and program robots using modern methods. This book provides all the information you will need to enter the industry without spending money on training or looking for someone willing to introduce you to the world of robotics. You will learn about all aspects of programming and implementing robots in a company. The book consists of four parts: general introduction to robotics for non-technical people; part two describes industry robotisation; part three depicts the principles and methods of programming robots; the final part touches upon the safety of industrial robots and cobots. Are you a student of a technical faculty, or even a manager of a plant who would like to robotise production? If you are interested in this subject, you won’t find a better book!
Download or read book Modern Robotics written by Harry Henderson and published by Infobase Publishing. This book was released on 2006 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Profiles eleven notable scientists in the field of robotics, discussing their research, accomplishments, ethical and professional obstacles, and contributions. Includes photographs, illustrations, chronology of notable events, and a list of resources.
Download or read book Robotics Industry 4 0 Issues New Intelligent Control Paradigms written by Alla G. Kravets and published by Springer Nature. This book was released on 2020-01-06 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on open issues of new intelligent control paradigms and their usage. Industry 4.0 requires new approaches in the context of secure connection, control, and maintenance of robotic systems, as well as enhancing their interaction with humans. The book presents recent advances in industrial robotics, and robotic design and modeling for various domains, and discusses the methodological foundations of the collaborative robotics concept as a breakthrough in modern industrial technologies. It also describes the implementation of multi-agent models, programs and methods that could be used in future processes for control, condition assessment, diagnostics, prognostication, and proactive maintenance. Further, the book addresses the issue of ensuring the space robotics systems and proposes reliable novel solutions. The authors also illustrate the integration of deep-learning methods and mathematical modeling based on examples of successful robotic systems in various countries, and analyze the connections between robotic modeling and design from the positions of new industrial challenges. The book is intended for practitioners and enterprise representatives, as well as scientists and Ph.D. and Master’s students pursuing research in the area of cyber-physical system development and implementation in various domains.
Download or read book Robotics written by Bruno Siciliano and published by Springer Science & Business Media. This book was released on 2010-08-20 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the successful Modelling and Control of Robot Manipulators by Sciavicco and Siciliano (Springer, 2000), Robotics provides the basic know-how on the foundations of robotics: modelling, planning and control. It has been expanded to include coverage of mobile robots, visual control and motion planning. A variety of problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained. The text includes coverage of fundamental topics like kinematics, and trajectory planning and related technological aspects including actuators and sensors. To impart practical skill, examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, end-of-chapter exercises are proposed, and the book is accompanied by an electronic solutions manual containing the MATLAB® code for computer problems; this is available free of charge to those adopting this volume as a textbook for courses.
Download or read book Advances in Robotics and Virtual Reality written by Tauseef Gulrez and published by Springer Science & Business Media. This book was released on 2011-11-13 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: A beyond human knowledge and reach, robotics is strongly involved in tackling challenges of new emerging multidisciplinary fields. Together with humans, robots are busy exploring and working on the new generation of ideas and problems whose solution is otherwise impossible to find. The future is near when robots will sense, smell and touch people and their lives. Behind this practical aspect of human-robotics, there is a half a century spanned robotics research, which transformed robotics into a modern science. The Advances in Robotics and Virtual Reality is a compilation of emerging application areas of robotics. The book covers robotics role in medicine, space exploration and also explains the role of virtual reality as a non-destructive test bed which constitutes a premise of further advances towards new challenges in robotics. This book, edited by two famous scientists with the support of an outstanding team of fifteen authors, is a well suited reference for robotics researchers and scholars from related disciplines such as computer graphics, virtual simulation, surgery, biomechanics and neuroscience.
Download or read book Mechatronics and Robotics written by Marina Indri and published by CRC Press. This book was released on 2020-11-24 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term “mechatronics” was coined in 1969, merging “mecha” from mechanism and “tronics” from electronics, to reflect the original idea at the basis of this discipline, that is, the integration of electrical and mechanical systems into a single device. The spread of this term, and of mechatronics itself, has been growing in the years, including new aspects and disciplines, like control engineering, computer engineering and communication/information engineering. Nowadays mechatronics has a well-defined and fundamental role, in strict relation with robotics. Drawing a sharp border between mechatronics and robotics is impossible, as they share many technologies and objectives. Advanced robots could be defined as mechatronic devices equipped with a “smart brain”, but there are also up-to-date mechatronic devices, used in tight interaction with humans, that are governed by smart architectures (for example, for safety purposes). Aim of this book is to offer a wide overview of new research trends and challenges for both mechatronics and robotics, through the contribution of researchers from different institutions, providing their view on specific subjects they consider as “hot topics” in both fields, with attention to new fields of application, new challenges to the research communities and new technologies available. The reader of this book will enjoy the various contributions, as they have been prepared with actual applications in mind, along a journey from advanced actuators and sensors to human-robot interaction, through robot control, navigation, planning and programming issues. The book presents several state-of-the-art solutions, like multiple-stage actuation to cope with conflicting specification of large motion-spans, ultra-high accuracy, model-based control for high-tech mechatronic systems, modern approaches of software systems engineering to robotics, aand humanoids for human assistance. The reader can also find new techniques in approaching the design of mechatronic systems in some possible industrial and service robotics scenarios, with a particular attention for the interaction between humans and mechanisms.
Download or read book New Laws of Robotics written by Frank Pasquale and published by Harvard University Press. This book was released on 2020-10-27 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: AI is poised to disrupt our work and our lives. We can harness these technologies rather than fall captive to them—but only through wise regulation. Too many CEOs tell a simple story about the future of work: if a machine can do what you do, your job will be automated. They envision everyone from doctors to soldiers rendered superfluous by ever-more-powerful AI. They offer stark alternatives: make robots or be replaced by them. Another story is possible. In virtually every walk of life, robotic systems can make labor more valuable, not less. Frank Pasquale tells the story of nurses, teachers, designers, and others who partner with technologists, rather than meekly serving as data sources for their computerized replacements. This cooperation reveals the kind of technological advance that could bring us all better health care, education, and more, while maintaining meaningful work. These partnerships also show how law and regulation can promote prosperity for all, rather than a zero-sum race of humans against machines. How far should AI be entrusted to assume tasks once performed by humans? What is gained and lost when it does? What is the optimal mix of robotic and human interaction? New Laws of Robotics makes the case that policymakers must not allow corporations or engineers to answer these questions alone. The kind of automation we get—and who it benefits—will depend on myriad small decisions about how to develop AI. Pasquale proposes ways to democratize that decision making, rather than centralize it in unaccountable firms. Sober yet optimistic, New Laws of Robotics offers an inspiring vision of technological progress, in which human capacities and expertise are the irreplaceable center of an inclusive economy.
Download or read book Our Robots Ourselves written by David A. Mindell and published by Penguin. This book was released on 2015-10-13 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: “[An] essential book… it is required reading as we seriously engage one of the most important debates of our time.”—Sherry Turkle, author of Reclaiming Conversation: The Power of Talk in a Digital Age From drones to Mars rovers—an exploration of the most innovative use of robots today and a provocative argument for the crucial role of humans in our increasingly technological future. In Our Robots, Ourselves, David Mindell offers a fascinating behind-the-scenes look at the cutting edge of robotics today, debunking commonly held myths and exploring the rapidly changing relationships between humans and machines. Drawing on firsthand experience, extensive interviews, and the latest research from MIT and elsewhere, Mindell takes us to extreme environments—high atmosphere, deep ocean, and outer space—to reveal where the most advanced robotics already exist. In these environments, scientists use robots to discover new information about ancient civilizations, to map some of the world’s largest geological features, and even to “commute” to Mars to conduct daily experiments. But these tools of air, sea, and space also forecast the dangers, ethical quandaries, and unintended consequences of a future in which robotics and automation suffuse our everyday lives. Mindell argues that the stark lines we’ve drawn between human and not human, manual and automated, aren’t helpful for understanding our relationship with robotics. Brilliantly researched and accessibly written, Our Robots, Ourselves clarifies misconceptions about the autonomous robot, offering instead a hopeful message about what he calls “rich human presence” at the center of the technological landscape we are now creating.
Download or read book State Estimation for Robotics written by Timothy D. Barfoot and published by Cambridge University Press. This book was released on 2017-07-31 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern look at state estimation, targeted at students and practitioners of robotics, with emphasis on three-dimensional applications.
Download or read book Introduction to Modern Robotics II written by Daisuke Chugo and published by Createspace Independent Publishing Platform. This book was released on 2012-08-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical guide about designing, building and programming modern robotics systems. It presents a collection of wide range research results from the robotics community. Various aspects of current research in robotics area are explored and discussed. In particular, the major part of the book is devoted to robotic vision systems, robot navigation, human-robot interactions and adaptive learning systems. Different approaches including theorems and formal proofs for these systems are provided. Some advanced mathematics will be involved. There are totally 15 chapters in this book.Chapter 1 analyzes and compares two robotics frameworks based on the identified requirements, and discusses the benefits and drawbacks of using robotics frameworks. Chapter 2 shows how mechatronics and robotics are fused with objects of daily life to become assistive systems, and thus become an integral part of our built environment. Chapter 3 describes a new framework for solving robotic navigation problems in a continuous environment. The framework balances between exploration and exploitation, and integrates global planning algorithms, local navigation routines, and exploration procedures in order to achieve the global goal. Chapter 4 addresses the Coverage Path Planning (CPP) problem applied to aerial robots whose mission is to visual cover a determinate wide area. Chapter 5 proposes a planning method to unravel deformable linear objects based on their silhouette, which corresponds to imperfect state information. Chapter 6 proposes a design method for the wheeled vehicle with the passive linkage mechanism for increasing step-climbing performance. Chapter 7 proposes an algorithm for identifying structural motifs. Chapter 8 discusses how we can use Reinforcement Learning to learn how to move a group of servos in order to achieve a motion behavior. Chapter 9 reviews the most widely adopted calibration procedures for industrial robots. In Chapter 10, the complete mathematical model of a highly complex and rigid-flexible coupling mechanical system is deduced, using the classical approach of Newton-Euler Method. Chapter 11 presents computationally efficient algorithms for the calculation of the Jacobian and direct dynamics of elastic parallel manipulators. Chapter 12 proposed a PDE based approach for grayscale image restoration. Chapter 13 presents development and research applying new approaches and means for the design of a Modular multi-Applicable Neural Network (MANN) classification structure with Programmable Logic Controllers (PLC) for industrial implementation. Chapter 14 proposes a framework for on-line novelty detection using artificial vision as main sensory input in autonomous mobile robots. Finally, chapter 15 discusses the difficulties of control system design and implement, as well as proposes a framework for tackling controller design under the context of lacking reliable information. This book is suitable for advanced undergraduate students and postgraduate students. It takes a practical approach rather than a conceptual approach. It offers a truly reader-friendly way to get to the subject related to the semantic web, making it the ideal resources for any student who is new to this subject and providing a definitive guide to anyone in this vibrant and evolving discipline. This book is an invaluable companion for students from their first encounter with the subject to more advanced studies, while the full-color artworks are designed to present the key concepts with simplicity, clarity and consistency.
Download or read book Androids Cyborgs and Robots in Contemporary Culture and Society written by Thompson, Steven John and published by IGI Global. This book was released on 2017-09-13 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mankind’s dependence on artificial intelligence and robotics is increasing rapidly as technology becomes more advanced. Finding a way to seamlessly intertwine these two worlds will help boost productivity in society and aid in a variety of ways in modern civilization. Androids, Cyborgs, and Robots in Contemporary Culture and Society is an essential scholarly resource that delves into the current issues, methodologies, and trends relating to advanced robotic technology in the modern world. Featuring relevant topics that include STEM technologies, brain-controlled androids, biped robots, and media perception, this publication is ideal for engineers, academicians, students, and researchers that would like to stay current with the latest developments in the world of evolving robotics.
Download or read book Introduction to Modern Robotics written by Daisuke Chugo and published by Createspace Independent Publishing Platform. This book was released on 2012-01-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Modern Robotics provides a practical guide about designing, building and programming a modern robotics system. It presents a collection of wide range research results from the robotics community. Chapter 1 presents the development of a connected crawler robot for rough terrain. It specifically focuses on the number of crawler stages should be connected. Chapter 2 shows the design and development process of a humanoid robotic platform that combines power efficiency with flexible and robust motion (such as balancing the need for human-like walking capabilities) without complex computation. Chapter 3 proposes a developmental model for the acquisition of motion in an infant robot by using oscillators. Chapter 4 presents an innovative concept of artificial communication partners with a multi-agent mind model in order for realization of intuitive human-robot interaction. Chapter 5 describes an approach for a robot to self-recognize his/her image on a mirror, an important milestone towards implementing theory of mind on a humanoid robot. Chapter 6 outlines relationships between robotics and software engineering, motivates and illustrates the link between component based software engineering and a service-oriented robotic component model. Chapter 7 explores both the management and the technical aspect of a modern robotic team in the platform of a robot cup competition. Chapter 8 focuses on the methods for evolving a cooperative team for a minimal soccer game by conducting a comparative evaluation of 18 methods, and shows that there are complex correlations among design decisions. Chapter 9 introduces a new coordinative control system for multi-robot system through network software platform. Chapter 10 studies Social Odometry, a new approach to multi-robot localization based on local communication, which confers the robots the possibility to learn from each other. Chapter 11 concerns with the motion coordination of a multi-robot system over a planar cluttered space. Chapter 12 introduces evolutionary-based design of controllers for continuous-time processes, drives and robots. Chapter 13 shows how GA can be used to solve the interception and rendezvous problems without placing a restriction on the chasers speed, which is contradictory to the line-of-sight approach where the speed of the chaser must always be greater than the speed of the target. Chapter 14 explores and extends the application of simulation technique as a proactive risk management tool in infrastructure planning, design and optimisation. Chapter 15 describes a system exploiting complementary data for mined area reduction. It highlights the importance of adapted modeling and of information fusion, and proposes efficient methods based on belief function and fuzzy sets theories. Chapter 16 shows how the warning signals generated using the AR approach reveal the same or better effectiveness as standard visual signals coming from an industrial signaling device that is of commonly used in machinery. Chapter 17 proposes to combine sensory information from infrared and sonar sensors to improve obstacle-avoidance in a Khepera robot. This book is suitable for advanced undergraduate students and postgraduate students. It takes a practical approach rather than a conceptual approach. It offers a truly reader-friendly way to get to the subject related to the semantic web, making it the ideal resources for any student who is new to this subject and providing a definitive guide to anyone in this vibrant and evolving discipline. This book is an invaluable companion for students from their first encounter with the subject to more advanced studies, while the full-color artworks are designed to present the key concepts with simplicity, clarity and consistency.
