Download or read book Modern Methods of Construction written by and published by . This book was released on 2016 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Methods of Construction and Innovative Materials written by Arthur Lyons and published by Taylor & Francis. This book was released on 2024-04-01 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new textbook has two main themes. The first is Modern Methods of Construction (MMC) which is the off-site manufacture of a wide spectrum of products, ranging from whole buildings to be transported onto site, down to smaller units or components for site integration. The second theme describes the innovation and progress towards carbon zero by the major generators of CO2 in the construction industry – namely cement, steel and masonry. The first section of the book describes and illustrates with photographs, the major forms of Modern Methods of Construction. These include fully completed 3D units, panelised systems, pods, sub-assemblies and on-site MMC. The section on Innovative Materials then describes a wide range of construction products which are entering into the built environment sector. Some new entrants are variants on well-established construction materials such as steel and concrete. Materials such as these will remain major construction materials for the foreseeable future, but their composition and manufacturing processes will inevitably have to change. Timber also will remain a major construction material, but sustainable sourcing is key and its utilisation as cross-lamination timber (CLT) or as modified timber is rapidly developing. As a result, students and practitioners must familiarise themselves with these materials, their composition, and various uses. The book goes on to describe variants of other traditional building products, such as glass, plastic and insulation, which are undergoing major developments leading towards enhanced environmental sustainability, as well as many emergent materials, some of which are likely to be significant in future. Modern Methods of Construction and Innovative Materials is the only book combining these important elements of the future of the industry in an easy-to-read guide for students and new practitioners. It is essential reading for anyone studying and working in the built environment, be they architects, construction managers, surveyors or engineers.

Download or read book Industry 4 0 Solutions for Building Design and Construction written by Farzad Pour Rahimian and published by Routledge. This book was released on 2021-12-20 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth results and case studies in innovation from actual work undertaken in collaboration with industry partners in Architecture, Engineering, and Construction (AEC). Scientific advances and innovative technologies in the sector are key to shaping the changes emerging as a result of Industry 4.0. Mainstream Building Information Management (BIM) is seen as a vehicle for addressing issues such as industry fragmentation, value-driven solutions, decision-making, client engagement, and design/process flow; however, advanced simulation, computer vision, Internet of Things (IoT), blockchain, machine learning, deep learning, and linked data all provide immense opportunities for dealing with these challenges and can provide evidenced-based innovative solutions not seen before. These technologies are perceived as the “true” enablers of future practice, but only recently has the AEC sector recognised terms such as “golden key” and “golden thread” as part of BIM processes and workflows. This book builds on the success of a number of initiatives and projects by the authors, which include seminal findings from the literature, research and development, and practice-based solutions produced for industry. It presents these findings through real projects and case studies developed by the authors and reports on how these technologies made a real-world impact. The chapters and cases in the book are developed around these overarching themes: • BIM and AEC Design and Optimisation: Application of Artificial Intelligence in Design • BIM and XR as Advanced Visualisation and Simulation Tools • Design Informatics and Advancements in BIM Authoring • Green Building Assessment: Emerging Design Support Tools • Computer Vision and Image Processing for Expediting Project Management and Operations • Blockchain, Big Data, and IoT for Facilitated Project Management • BIM Strategies and Leveraged Solutions This book is a timely and relevant synthesis of a number of cogent subjects underpinning the paradigm shift needed for the AEC industry and is essential reading for all involved in the sector. It is particularly suited for use in Masters-level programs in Architecture, Engineering, and Construction.

Download or read book Offsite Production and Manufacturing for Innovative Construction written by Jack S. Goulding and published by Routledge. This book was released on 2019-06-19 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: The offsite and modular market is continuing to grow. This book builds on the success of a number of initiatives, including formative findings from literature, research and development and practice-based evidence (success stories). It presents new thinking and direction from leading experts in the fields of: design, process, construction, engineering, manufacturing, logistics, robotics, delivery platforms, business and transformational strategies, change management, legislation, organisational learning, software design, innovation and biomimetics. This book is particularly novel and timely, as it brings together a number of cogent subjects under one collective ‘umbrella’. Each of these chapters contain original findings, all of which culminate in three 'Key Learning Points' which provide new insight into the cross-cutting themes, interrelationships and symbiotic forces that exist between each of these chapters. This approach also provides readers with new contextualised understanding of the wider issues affecting the offsite market, from the need to embrace societal challenges, through to the development of rich value-laden solutions required for creating sector resilience. Content includes a balance between case studies and practice-based work, through to technical topics, theoretical propositions, pioneering research and future offsite opportunities ready for exploitation. This work includes: stakeholder integration, skills acquisition, new business models and processes, circularity and sustainable business strategies, robotics and automation, innovation and change, lean production methodologies and new construction methods, Design for Manufacturing and Assembly, scaled portfolio platforms and customisability, new legal regulatory standards and conformance issues and offsite feasibility scenario development/integration.

Download or read book Design and Construction of High performance Homes written by Franca Trubiano and published by Routledge. This book was released on 2013 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both professionals and students are increasingly committed to achieving high-performance metrics in the design, construction and operation of residential buildings. This book responds to this demand by offering a comprehensive guide which features: architectural innovations in building skin technologies which make lighter more transparent buildings high performing energy-free architectural design principles and advances in building-integrated photovoltaics essential engineering principles, controls and approaches to simulation for achieving net zero the advantages of integrated design in residential construction and the challenges and opportunities it engenders detailed case studies of innovative homes which have incorporated low-energy design solutions, new materials, alternative building assemblies, digital fabrication, integrated engineering systems and operational controls. Divided into four parts, the book discusses the requisite AEC (Architecture, Engineering and Construction) knowledge needed when building a high-performance home. It also communicates this information across four case studies, which provide the reader with a thorough overview of all aspects to be considered in the design and construction of sustainable homes. With contributions from experts in the field, the book provides a well-rounded and multi-faceted approach. This book is essential reading for students and professionals in design, architecture, engineering (civil, mechanical and electrical), construction and energy management.

Download or read book Societies under Construction written by Daniel J. Sage and published by Springer. This book was released on 2018-05-24 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited collection explores building construction as an inspiring, yet often overlooked, place to develop new knowledge about the development of human societies. Eschewing dominant engineering and management perspectives on construction, the book is purposefully broad in its scope, both empirically and theoretically, as reflecting the rich underexplored potential of studies of building construction to inform a wide span of intellectual debates across the social science and humanities. The seven chapters encompass contributions to theories of: spatiotemporal organization with wildlife on building sites; institutional change with building ruins; home with Mexican self-help housing; place with a suburban housing development; socio-materiality with the adaptation of a university library; migrant labour with the Parisian postwar construction boom; and gender with a female site manager in Sweden. This book seeks to develop a new critical sub-area for construction studies that focuses on the actual processes and practices of ‘constructing'. Bringing together diverse members of construction research communities working in a variety of contexts, it develops empirical engagements with building work to challenge its marginalization, relative to architectural studies, to provoke novel understandings of human history, geography and sociology.

Download or read book BIM in Small Practices written by Robert Klaschka and published by Routledge. This book was released on 2019-08-14 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: BIM (Building Information Modelling) is revolutionising architecture and construction, as more and more practices are realising the benefits it brings to design, sustainability, and construction. There is a perception that BIM is a process best left to large practices – requiring significant resources and the ability to invest heavily in IT. This book overturns that misconception: introducing a selection of inspirational BIM-enabled projects by small architectural practices. Full of practical tips and hard-won experience, BIM in Small Practices: Illustrated Case Studies includes pithy contributions from industry experts who identify and explore the important issues for small practices including how to get your practice started with BIM, and how it aligns to the new Plan of Work. This landmark publication will motivate small practices who are considering taking those first steps towards implementing BIM.

Download or read book Prefabricated and Modular Architecture written by William Hogan-O'Neill and published by The Crowood Press. This book was released on 2021-02-22 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prefabricated and Modular Architecture demystifies age-old perceptions surrounding prefabrication and modularization of buildings, offering a fresh approach to design and procurement. Experienced architect, William Hogan-O'Neill, provides a unique insight into why architectural design, manufacturing and assembly processes must coexist in parallel. In order for the architectural profession to have a meaningful existence in the future, it must examine the new opportunities that are emerging through automation and artificial intelligence from within the factory environment, as opposed to the construction site. In addition, the book explores the following topics; core elements defining prefabrication; perceptions and influences; precision, exactness and tolerances; standardization and economies of scale; panelized versus modular buildings as a design solution and, finally, common features, technical considerations and certification.

Download or read book Marshall and Worthing s The Construction of Houses written by Duncan Marshall and published by Routledge. This book was released on 2021-03-30 with total page 807 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sixth edition of The Construction of Houses builds on the success of the previous five editions. The book provides a comprehensive introduction to the principles and processes of the construction of houses and their services. As such it is aimed at providing a broad understanding of domestic building construction for students as part of their academic studies and as a useful information source for practitioners. The existing chapters have all been updated and most of them expanded to take account of changes to dwelling house construction since the last edition and there are new chapters on ‘Modern Methods of Construction’ and ‘Regulatory controls and building standards’. Additionally, many new and/or updated photographs and diagrams have been added. As with the previous editions, the authors have concentrated on presenting current mainstream approaches to the construction of houses. The detailed, yet accessible, text that is supported by hundreds of coloured photographs and diagrams provides clear explanations of the many complex processes that go into the building of a house. A deeper insight into modern construction is also given by the book’s consideration of historical building techniques from the 18th century onwards in order to illustrate how and why we build houses in the way we do now.

Download or read book Design in Modular Construction written by Mark Lawson and published by CRC Press. This book was released on 2014-02-24 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modular construction can dramatically improve efficiency in construction, through factory production of pre-engineered building units and their delivery to the site either as entire buildings or as substantial elements. The required technology and application are developing rapidly, but design is still in its infancy. Good design requires a knowled

Download or read book Land Development and Design written by Paul Syms and published by John Wiley & Sons. This book was released on 2010-08-13 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of brownfield land can address shortfalls in theavailability of land for housing and other buildings, but thesesites present a range of problems that must be overcome in anysuccessful development. Land, Development and Design addresses all of the issuesin the context of the reuse of urban land, providing a solid,readable overview of the principles and practice of theregeneration of brownfield sites. Divided into four parts, coveringthe development process and planning policies; site assessment,risk analysis and remediation of contaminated land; developmentissues and finally design issues, the principal focus of the bookis on the reuse of urban land. It includes a full discussion ofcontaminated land, so that readers are aware of the issues andoptions available to resolve this problem. Land, Development and Design has been extensively revisedsince its first edition and provides final year undergraduate andpostgraduate students of both planning and surveying, as well asprofessional planners, surveyors and developers, a solid andreadable overview of the principles and practice of regeneration ofthe built environment.

Download or read book Prefabricated Systems written by Ulrich Knaack and published by Walter de Gruyter. This book was released on 2012-12-13 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a number of years, modular construction – the use of prefabricated elements in architecture – has once again become a subject of lively discussion and debate. Long written off as monotonous, today’s building components are actually highly differentiated and capable of supporting and enhancing the architect’s creativity. Numerous structures work with prefabricated components; for single-family homes the figure is ninety-eight percent, and modular systems are available that meet high aesthetic standards. This book provides an overview of the various different systems and their possible uses, particularly in the areas of housing, office, and industrial buildings. It explains the processes and components of modular construction and the behavior of the various materials when this construction approach is used. The authors offer strategies for planning and designing with prefabricated systems so that the architect can use them productively. Numerous drawings explain the principles of modular construction, while built examples forge a link between those principles and the practical activity of building.

Download or read book Creative Design and Innovation written by Robin Roy and published by Taylor & Francis. This book was released on 2024-02-09 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using many real-world examples and cases, this book identifies key factors and processes that have contributed to the creation of successful new products, buildings, and innovations, or resulted in some failures. Such factors include the creativity of individuals and groups, their sources of inspiration, the processes of creative design and innovation, and the characteristics of the products, buildings, and innovations themselves. Much has been written about creativity and innovation, but what helps to foster creativity, enable creative ideas to be translated into practical designs, and ensure those new products or buildings succeed as innovations on the market or in use? This book discusses these elements through the author’s origination and analysis of examples and case studies ranging from the revolutionary innovation of the smartphone, through radical innovations in domestic appliances and sustainable housing, to creative designs of contemporary jewellery. The broad range of examples and cases include product and fashion design, filmmaking and fine art, as well as industrial design, engineering, and architecture, offering lessons for creatives, designers, and innovators from many subject backgrounds. Analysis of the different factors, successes, and failures are presented in text boxes throughout the book to allow readers to easily understand the key lessons from each example or case, with numerous colour visuals, diagrams, and charts for illustration. This book is a must-read for a broad audience interested in creativity, design, and innovation, including practitioners in design, engineering, architecture, and product management, and students and instructors of those subjects.

Download or read book Emerging Research in Sustainable Energy and Buildings for a Low Carbon Future written by Robert J. Howlett and published by Springer Nature. This book was released on 2021-02-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains an introduction and 20 studies, each describing a recent research investigation in the area of sustainable and resilient buildings, built environment infrastructure and renewable energy. Contributions are from many different countries of the world and on a range of topics, representing a sample of research within the ‘sustainable energy and buildings’ field. The book begins with chapters on the sustainable design of buildings, followed by descriptions of issues relating to the renovation, restoration and reconstruction of existing buildings, or in one case a railway wagon. The next part of the book covers factors that form barriers or impediments to low or zero carbon buildings, followed by studies of issues relating to policy and certification. There then follow four chapters on various topics related to sustainable buildings – undergraduate courses, insurance issues, biophilia relating to buildings and thermal conductivity measurement. There are several chapters relating to renewable energy, followed by two chapters with a sustainable transport theme, one relating to electric vehicles, and the other about a sustainable road infrastructure. The final chapter is on the manufacture of sustainable building components for the UK housing sector. The book is of use to engineers, scientists, researchers, practitioners, academics and all those who are interested to develop and use sustainability science and technology for the betterment of our planet and humankind, and to mitigate climate change reality.

Download or read book Construction Planning Programming and Control written by Brian Cooke and published by John Wiley & Sons. This book was released on 2025-01-13 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential introduction to the management of building projects Construction management is a complex discipline with many facets. The essence of construction management is the delivery of construction projects to meet the client’s goals whilst recognising the commercial interests of the many designers, consultants and contractors involved. Balancing the expected quality outcomes, the highest safety standards and time and budget pressures is not an easy task. Therefore, students and practitioners looking to understand the core principles of construction management need an authoritative, accessible and comprehensive text on the subject. Since its first edition in 1998, Construction Planning, Programming and Control has met this need with its practical approach to the management of construction projects. The book covers the principles and practice of project time and cost control and includes key related topics and more. It places the subject matter in the context of the challenges facing the construction industry and explains complex issues in a practical and understandable way. Readers of the fourth edition of Construction Planning, Programming and Control will also find detailed coverage of: Procurement and contracts, supply chain and risk management and health and safety management including CDM 2015 JCT 2016, NEC4; ICC and FIDIC conditions of contract Method statements and the development of safe systems of work Three new major case studies including an in-depth look at HS2 Fully updated content to reflect new thinking with regard to modern methods of construction (MMC), building information modelling (BIM) and the latest planning and cost management software Construction Planning, Programming and Control is an invaluable reference for students of construction management, surveying, civil engineering, and more.

Download or read book Materials for Energy Efficiency and Thermal Comfort in Buildings written by Matthew R Hall and published by Elsevier. This book was released on 2010-04-21 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost half of the total energy produced in the developed world is inefficiently used to heat, cool, ventilate and control humidity in buildings, to meet the increasingly high thermal comfort levels demanded by occupants. The utilisation of advanced materials and passive technologies in buildings would substantially reduce the energy demand and improve the environmental impact and carbon footprint of building stock worldwide.Materials for energy efficiency and thermal comfort in buildings critically reviews the advanced building materials applicable for improving the built environment. Part one reviews both fundamental building physics and occupant comfort in buildings, from heat and mass transport, hygrothermal behaviour, and ventilation, on to thermal comfort and health and safety requirements.Part two details the development of advanced materials and sustainable technologies for application in buildings, beginning with a review of lifecycle assessment and environmental profiling of materials. The section moves on to review thermal insulation materials, materials for heat and moisture control, and heat energy storage and passive cooling technologies. Part two concludes with coverage of modern methods of construction, roofing design and technology, and benchmarking of façades for optimised building thermal performance.Finally, Part three reviews the application of advanced materials, design and technologies in a range of existing and new building types, including domestic, commercial and high-performance buildings, and buildings in hot and tropical climates.This book is of particular use to, mechanical, electrical and HVAC engineers, architects and low-energy building practitioners worldwide, as well as to academics and researchers in the fields of building physics, civil and building engineering, and materials science. - Explores improving energy efficiency and thermal comfort through material selection and sustainable technologies - Documents the development of advanced materials and sustainable technologies for applications in building design and construction - Examines fundamental building physics and occupant comfort in buildings featuring heat and mass transport, hygrothermal behaviour and ventilation

Download or read book Innovations for Sustainable Building Design and Refurbishment in Scotland written by Branka Dimitrijević and published by Springer Science & Business Media. This book was released on 2013-11-08 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents innovations for sustainable building design and refurbishment developed and tested through feasibility studies undertaken by researchers at Scottish universities in collaboration with small to medium size enterprises in Scotland during the ‘CIC Start Online’ project that ran from September 2009 to February 2013. The project was led by Glasgow Caledonian University in collaboration with Edinburgh Napier University, Glasgow School of Art, Heriot-Watt University, the Robert Gordon University, University of Edinburgh and the University of Strathclyde Glasgow. The book includes chapters on Context and Policies, Planning, Building Design, Technologies, Construction, Refurbishment and Performance. The contents of each chapter are based on 63 completed studies that were initiated by businesses operating in the construction sector or providing services to the sector, indicating the scope of research required to assist the industry to develop more sustainable products and processes. The book informs the reader about the range of innovations that were tested and highlight potential future research areas. Readers can find in-depth information by accessing the project website www.cicstart.org, where full reports on most studies and the video recordings of interactive online seminars that presented the outcomes of the studies are available. Along with the new knowledge on how innovations for sustainable building design and refurbishment can be applied in practice, the book demonstrates how joint projects of several universities can be successfully managed and how an immediate knowledge transfer can be organized by using web tools to reach over 2,200 current members nationally and internationally (in UK and 53 other countries).