Download or read book Instrumentation and Control Systems for Nuclear Power Plants written by Mauro Cappelli and published by Woodhead Publishing. This book was released on 2023-03-21 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation and Control Systems for Nuclear Power Plants provides the latest innovative research onthe design of effective modern I&C systems for both existing and newly commissioned plants, along withinformation on system implementation. Dr. Cappelli and his team of expert contributors cover fundamentals,explore the most advanced research in control systems technology, and tackle topics such as the human–machine interface, control room redesign, and control modeling. The inclusion of codes and standards,inspection procedures, and regulatory issues ensure that the reader can confidently design their own I&Csystems and integrate them into existing nuclear sites and projects. - Covers various viewpoints, including theory, modeling, design and applications of I&C systems - Includes codes and standards, inspection procedures and regulatory issues - Combines engineering and physics aspects in one thorough resource, presenting human factors, modeling and HMI together for the first time - Instrumentation and Control Systems for Nuclear Power Plants highlights the key role nuclear energy plays in the transition to a lower-carbon energy mix

Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by National Research Council and published by National Academies Press. This book was released on 1997-04-18 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.

Download or read book Modern Instrumentation and Control for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1999 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report replaces Technical Reports Series No. 239, Nuclear Power Plant Instrumentation and Control: A Guidebook (1984), in particular by changing the emphasis from guidance to summarizing operating experience and discussing new technologies. It provides an up to date overview of nuclear power plant instrumentation and control technology and the background against which such systems are implemented. It is directed to meet the needs of instrumentation and control engineers, but also of nuclear power plant designers and regulators.

Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by Committee on Application of Digital Instrumentation and Control Systems to Nuclear Power Plant Operations and Safety and published by National Academies Press. This book was released on 1997-05-02 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.

Download or read book Nuclear Power Plant Instrumentation and Control Systems for Safety and Security written by Yastrebenetsky, Michael and published by IGI Global. This book was released on 2014-02-28 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accidents and natural disasters involving nuclear power plants such as Chernobyl, Three Mile Island, and the recent meltdown at Fukushima are rare, but their effects are devastating enough to warrant increased vigilance in addressing safety concerns. Nuclear Power Plant Instrumentation and Control Systems for Safety and Security evaluates the risks inherent to nuclear power and methods of preventing accidents through computer control systems and other such emerging technologies. Students and scholars as well as operators and designers will find useful insight into the latest security technologies with the potential to make the future of nuclear energy clean, safe, and reliable.

Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by National Research Council and published by Joseph Henry Press. This book was released on 1997-02 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation, without introducing off-setting safety problems. This final report of a two-phased study identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. The book focuses on eight areas: software, quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and adequacy of technical infrastructure.

Download or read book Power plant Control and Instrumentation written by David Lindsley and published by IET. This book was released on 2000 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes control systems for boilers and heat-recovery steam generators (HRSGs) in a variety of applications, from waste-to-energy plants to combined-cycle gas-turbine power stations. Basics such as methods of connecting instruments are explained, and more advanced discussions of design features of distributed control systems are also included. At every stage, emphasis is given to the interactive nature of plants and to troubleshooting and problem solving. Includes chapter summaries. The author is Fellow of the Institution of Electrical Engineers, and the Institute of Marine Engineers, and is a Senior Member of the Instrument Society of America. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Preparing and Conducting Review Missions Instrumentation and Control Systems in Nuclear Power Plants written by and published by . This book was released on 2016 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Power Plants Innovative Technologies for Instrumentation and Control Systems written by Yang Xu and published by Springer Nature. This book was released on 2020-01-07 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a compilation of selected papers from the Fourth International Symposium on Software Reliability, Industrial Safety, Cyber Security and Physical Protection of Nuclear Power Plant, held in August 2019 in Guiyang, China. The purpose of the symposium was to discuss inspection, testing, certification and research concerning the software and hardware of instrument and control (I&C) systems used at nuclear power plants (NPP), such as sensors, actuators and control systems. The event provides a venue for exchange among experts, scholars and nuclear power practitioners, as well as a platform for the combination of teaching and research at universities and enterprises to promote the safe development of nuclear power plants. Readers will find a wealth of valuable insights into achieving safer and more efficient instrumentation and control systems.

Download or read book Modernization of Instrumentation and Control in Nuclear Power Plants written by and published by . This book was released on 1998 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Energy Power Generation Automation and Intelligent Technology written by Pengfei Gu and published by Springer Nature. This book was released on 2023-05-24 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers from the Seventh Symposium on Digital Instrumentation and Control Technology for Nuclear Power Plant, held online on January 11, 2023. The purpose of this symposium is to discuss inspection, test, certification and research for the software and hardware of Instrumentation and Control (I&C) systems in nuclear power plants (NPP), such as sensors, actuators and control system. It provides a platform of technical exchange and experience sharing for those broad masses of experts and scholars and nuclear power practitioners. At the same time, it also provides a platform for the combination of production, teaching and research in universities and enterprises to promote the safe development of nuclear power plant. Readers will encounter new ideas for realizing a more efficient and safer instrumentation and control system.

Download or read book Management of Ageing and Obsolescence of Instrumentation and Control Systems and Equipment in Nuclear Power Plants and Related Facilities Through Mode written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2023-02-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ageing of instrumentation and control (I&C) equipment at nuclear facilities has the potential to degrade mechanisms, which can in turn reduce safety margins and increase operating and maintenance costs. Obsolescence of I&C equipment can compound matters as suitable replacements become difficult to source. In 2019, the IAEA Technical Working Group on Nuclear Power Plant Instrumentation and Control acknowledged that relevant system and strategy guidance was required to implement modern technology at nuclear facilities. The purpose of this publication is to assist Member States in developing strategies to address ageing and obsolescence issues for I&C systems and it provides detail on modernization considerations and information from relevant recent operator experience. An appendix summarizes cable ageing management through condition monitoring, and several annexes describe Member States' practices and experience with l&C ageing management and modernization.

Download or read book Approaches for Overall Instrumentation and Control Architectures of Nuclear Power Plants written by and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by and published by . This book was released on 1995 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Maintenance of Process Instrumentation in Nuclear Power Plants written by H.M. Hashemian and published by Springer Science & Business Media. This book was released on 2006-11-09 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a training course for I and C maintenance engineers in power, process, chemical, and other industries. It summarizes all the scattered literature in this field. The book compiles 30 years of knowledge gained by the author and his staff in testing the I and C systems of nuclear power plants around the world. It focuses on process temperature and pressure sensors and the verification of these sensors’ calibration and response time.

Download or read book Implementing Digital Instrumentation and Control Systems in the Modernization of Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2009 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication describes a process for planning and conducting a project to implement digital instrumentation and control (I&C) systems in the modernization of a nuclear power plant (NPP). Many of the existing NPPs in the world are approaching, or have reached, the midpoint of their design life. At the same time, there have been tremendous advances in electronics, computers and networks. These new technologies have been incorporated into the digital I&C hardware and software currently available. Even though advanced digital I&C systems have been used extensively in many other industries, their use in the nuclear industry is still very limited. The complexity of digital I&C systems requires a comprehensive implementation plan to ensure that plant safety is maintained, and this publication presents the experience gained to date. It is intended to be of use to those involved in the design or implementation of such modernization projects.