Download or read book Modern Gas Turbine Systems written by Peter Jansohn and published by Elsevier. This book was released on 2013-08-31 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern gas turbine power plants represent one of the most efficient and economic conventional power generation technologies suitable for large-scale and smaller scale applications. Alongside this, gas turbine systems operate with low emissions and are more flexible in their operational characteristics than other large-scale generation units such as steam cycle plants. Gas turbines are unrivalled in their superior power density (power-to-weight) and are thus the prime choice for industrial applications where size and weight matter the most. Developments in the field look to improve on this performance, aiming at higher efficiency generation, lower emission systems and more fuel-flexible operation to utilise lower-grade gases, liquid fuels, and gasified solid fuels/biomass. Modern gas turbine systems provides a comprehensive review of gas turbine science and engineering.The first part of the book provides an overview of gas turbine types, applications and cycles. Part two moves on to explore major components of modern gas turbine systems including compressors, combustors and turbogenerators. Finally, the operation and maintenance of modern gas turbine systems is discussed in part three. The section includes chapters on performance issues and modelling, the maintenance and repair of components and fuel flexibility.Modern gas turbine systems is a technical resource for power plant operators, industrial engineers working with gas turbine power plants and researchers, scientists and students interested in the field. - Provides a comprehensive review of gas turbine systems and fundamentals of a cycle - Examines the major components of modern systems, including compressors, combustors and turbines - Discusses the operation and maintenance of component parts

Download or read book Commercial Aircraft Propulsion and Energy Systems Research written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-09 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary human activities that release carbon dioxide (CO2) into the atmosphere are the combustion of fossil fuels (coal, natural gas, and oil) to generate electricity, the provision of energy for transportation, and as a consequence of some industrial processes. Although aviation CO2 emissions only make up approximately 2.0 to 2.5 percent of total global annual CO2 emissions, research to reduce CO2 emissions is urgent because (1) such reductions may be legislated even as commercial air travel grows, (2) because it takes new technology a long time to propagate into and through the aviation fleet, and (3) because of the ongoing impact of global CO2 emissions. Commercial Aircraft Propulsion and Energy Systems Research develops a national research agenda for reducing CO2 emissions from commercial aviation. This report focuses on propulsion and energy technologies for reducing carbon emissions from large, commercial aircraftâ€" single-aisle and twin-aisle aircraft that carry 100 or more passengersâ€"because such aircraft account for more than 90 percent of global emissions from commercial aircraft. Moreover, while smaller aircraft also emit CO2, they make only a minor contribution to global emissions, and many technologies that reduce CO2 emissions for large aircraft also apply to smaller aircraft. As commercial aviation continues to grow in terms of revenue-passenger miles and cargo ton miles, CO2 emissions are expected to increase. To reduce the contribution of aviation to climate change, it is essential to improve the effectiveness of ongoing efforts to reduce emissions and initiate research into new approaches.

Download or read book Gas Turbines for Electric Power Generation written by S. Can Gülen and published by Cambridge University Press. This book was released on 2019-02-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything you wanted to know about industrial gas turbines for electric power generation in one source with hard-to-find, hands-on technical information.

Download or read book Gas Turbine Design Components and System Design Integration written by Meinhard T. Schobeiri and published by Springer. This book was released on 2017-06-06 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book written by a world-renowned expert with more than forty years of active gas turbine R&D experience comprehensively treats the design of gas turbine components and their integration into a complete system. Unlike many currently available gas turbine handbooks that provide the reader with an overview without in-depth treatment of the subject, the current book is concentrated on a detailed aero-thermodynamics, design and off-deign performance aspects of individual components as well as the system integration and its dynamic operation.This new book provides practicing gas turbine designers and young engineers working in the industry with design material that the manufacturers would keep proprietary. The book is also intended to provide instructors of turbomachinery courses around the world with a powerful tool to assign gas turbine components as project and individual modules that are integrated into a complete system. Quoting many statements by the gas turbine industry professionals, the young engineers graduated from the turbomachinery courses offered by the author, had the competency of engineers equivalent to three to four years of industrial experience.

Download or read book Gas Turbine Power Generation written by Paul Breeze and published by Academic Press. This book was released on 2016-02-24 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas-Turbine Power Generation is a concise, up-to-date, and readable guide providing an introduction to gas turbine power generation technology. It includes detailed descriptions of gas fired generation systems, demystifies the functions of gas fired technology, and explores the economic and environmental risk factors Engineers, managers, policymakers and those involved in planning and delivering energy resources will find this reference a valuable guide that will help them establish a reliable power supply as they also account for both social and economic objectives. - Provides a concise, up-to-date, and readable guide on gas turbine power generation technology - Focuses on the evolution of gas-fired power generation using gas turbines - Evaluates the economic and environmental viability of the system with concise diagrams and accessible explanations

Download or read book The Design of High Efficiency Turbomachinery and Gas Turbines second edition with a new preface written by David Gordon Wilson and published by MIT Press. This book was released on 2014-09-12 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a comprehensive textbook that introduces turbomachinery and gas turbines through design methods and examples. This comprehensive textbook is unique in its design-focused approach to turbomachinery and gas turbines. It offers students and practicing engineers methods for configuring these machines to perform with the highest possible efficiency. Examples and problems are based on the actual design of turbomachinery and turbines. After an introductory chapter that outlines the goals of the book and provides definitions of terms and parts, the book offers a brief review of the basic principles of thermodynamics and efficiency definitions. The rest of the book is devoted to the analysis and design of real turbomachinery configurations and gas turbines, based on a consistent application of thermodynamic theory and a more empirical treatment of fluid dynamics that relies on the extensive use of design charts. Topics include turbine power cycles, diffusion and diffusers, the analysis and design of three-dimensional free-stream flow, and combustion systems and combustion calculations. The second edition updates every chapter, adding material on subjects that include flow correlations, energy transfer in turbomachines, and three-dimensional design. A solutions manual is available for instructors. This new MIT Press edition makes a popular text available again, with corrections and some updates, to a wide audience of students, professors, and professionals.

Download or read book Gas Turbine System Technician mechanical 1 C Volume 2 written by Marshall B. Puffenbarger and published by . This book was released on 1987 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamic Modelling of Gas Turbines written by Gennady G. Kulikov and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whereas other books in this area stick to the theory, this book shows the reader how to apply the theory to real engines. It provides access to up-to-date perspectives in the use of a variety of modern advanced control techniques to gas turbine technology.

Download or read book Systems of Commercial Turbofan Engines written by Andreas Linke-Diesinger and published by Springer Science & Business Media. This book was released on 2008-05-21 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: To understand the operation of aircraft gas turbine engines, it is not enough to know the basic operation of a gas turbine. It is also necessary to understand the operation and the design of its auxiliary systems. This book fills that need by providing an introduction to the operating principles underlying systems of modern commercial turbofan engines and bringing readers up to date with the latest technology. It also offers a basic overview of the tubes, lines, and system components installed on a complex turbofan engine. Readers can follow detailed examples that describe engines from different manufacturers. The text is recommended for aircraft engineers and mechanics, aeronautical engineering students, and pilots.

Download or read book Principles of Solar Gas Turbines for Electricity Generation written by Amos Madhlopa and published by Springer. This book was released on 2018-05-11 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to solar gas turbines, providing fundamental knowledge and state-of-the-art developments in the field. A gas turbine is a heat engine in which a mixture of fuel and air is burned in a chamber that is an integral part of the flow circuit of the working fluid. The burnt gas mixture expands and turns the turbine, which can be connected to a generator for electricity production. Solar gas turbines offer an important alternative to conventional gas turbines driven by non-renewable, polluting fossil fuels such as diesel or natural gas. The book provides a comprehensive overview of the topic as well as numerous illustrations.

Download or read book Gas Turbine System Technician mechanical 3 2 written by John J. Ahern and published by . This book was released on 1989 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gas Turbine System Technician electrical 3 2 written by Robert W. Gonser and published by . This book was released on 1988 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Technologies for Gas Turbines written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-04-19 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leadership in gas turbine technologies is of continuing importance as the value of gas turbine production is projected to grow substantially by 2030 and beyond. Power generation, aviation, and the oil and gas industries rely on advanced technologies for gas turbines. Market trends including world demographics, energy security and resilience, decarbonization, and customer profiles are rapidly changing and influencing the future of these industries and gas turbine technologies. Technology trends that define the technological environment in which gas turbine research and development will take place are also changing - including inexpensive, large scale computational capabilities, highly autonomous systems, additive manufacturing, and cybersecurity. It is important to evaluate how these changes influence the gas turbine industry and how to manage these changes moving forward. Advanced Technologies for Gas Turbines identifies high-priority opportunities for improving and creating advanced technologies that can be introduced into the design and manufacture of gas turbines to enhance their performance. The goals of this report are to assess the 2030 gas turbine global landscape via analysis of global leadership, market trends, and technology trends that impact gas turbine applications, develop a prioritization process, define high-priority research goals, identify high-priority research areas and topics to achieve the specified goals, and direct future research. Findings and recommendations from this report are important in guiding research within the gas turbine industry and advancing electrical power generation, commercial and military aviation, and oil and gas production.

Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. - Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers - A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field - The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems

Download or read book Developments in High Temperature Corrosion and Protection of Materials written by W Gao and published by Elsevier. This book was released on 2008-04-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings.Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials.This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. - Describes the latest developments in understanding high temperature corrosion - Presents the latest research by the leading innovators from around the globe - Case studies are provided to illustrate key points

Download or read book Gas Turbine System Technician electrical 1 C Volume 2 written by Robert W. Gonser and published by . This book was released on 1987 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Integrated Gasification Combined Cycle IGCC Technologies written by Ting Wang and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Gasification Combined Cycle (IGCC) Technologies discusses this innovative power generation technology that combines modern coal gasification technology with both gas turbine and steam turbine power generation, an important emerging technology which has the potential to significantly improve the efficiencies and emissions of coal power plants. The advantages of this technology over conventional pulverized coal power plants include fuel flexibility, greater efficiencies, and very low pollutant emissions. The book reviews the current status and future developments of key technologies involved in IGCC plants and how they can be integrated to maximize efficiency and reduce the cost of electricity generation in a carbon-constrained world. The first part of this book introduces the principles of IGCC systems and the fuel types for use in IGCC systems. The second part covers syngas production within IGCC systems. The third part looks at syngas cleaning, the separation of CO2 and hydrogen enrichment, with final sections describing the gas turbine combined cycle and presenting several case studies of existing IGCC plants. - Provides an in-depth, multi-contributor overview of integrated gasification combined cycle technologies - Reviews the current status and future developments of key technologies involved in IGCC plants - Provides several case studies of existing IGCC plants around the world