Download or read book Design of Steel Structures written by Elias G. Abu-Saba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for classroom teaching in architectural and civil engineering at the graduate and undergraduate levels. Although it has been developed from lecture notes given in structural steel design, it can be useful to practicing engineers. Many of the examples presented in this book are drawn from the field of design of structures. Design of Steel Structures can be used for one or two semesters of three hours each on the undergraduate level. For a two-semester curriculum, Chapters 1 through 8 can be used during the first semester. Heavy emphasis should be placed on Chapters 1 through 5, giving the student a brief exposure to the consideration of wind and earthquakes in the design of buildings. With the new federal requirements vis a vis wind and earthquake hazards, it is beneficial to the student to have some under standing of the underlying concepts in this field. In addition to the class lectures, the instructor should require the student to submit a term project that includes the complete structural design of a multi-story building using standard design procedures as specified by AISC Specifications. Thus, the use of the AISC Steel Construction Manual is a must in teaching this course. In the second semester, Chapters 9 through 13 should be covered. At the undergraduate level, Chapters 11 through 13 should be used on a limited basis, leaving the student more time to concentrate on composite construction and built-up girders.
Download or read book Design of Steel Structures to Eurocodes written by Ioannis Vayas and published by Springer. This book was released on 2018-11-23 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the rules for the design of steel and composite building structures according to Eurocodes, covering the structure as a whole, as well as the design of individual structural components and connections. It addresses the following topics: the basis of design in the Eurocodes framework; the loads applied to building structures; the load combinations for the various limit states of design and the main steel properties and steel fabrication methods; the models and methods of structural analysis in combination with the structural imperfections and the cross-section classification according to compactness; the cross-section resistances when subjected to axial and shear forces, bending or torsional moments and to combinations of the above; component design and more specifically the design of components sensitive to instability phenomena, such as flexural, torsional and lateral-torsional buckling (a section is devoted to composite beams); the design of connections and joints executed by bolting or welding, including beam to column connections in frame structures; and alternative configurations to be considered during the conceptual design phase for various types of single or multi-storey buildings, and the design of crane supporting beams. In addition, the fabrication and erection procedures, as well as the related quality requirements and the quality control methods are extensively discussed (including the procedures for bolting, welding and surface protection). The book is supplemented by more than fifty numerical examples that explain in detail the appropriate procedures to deal with each particular problem in the design of steel structures in accordance with Eurocodes. The book is an ideal learning resource for students of structural engineering, as well as a valuable reference for practicing engineers who perform designs on basis of Eurocodes.
Download or read book Architecture and Construction in Steel written by Alan Blanc and published by Taylor & Francis. This book was released on 2003-09-02 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide to the successful use of steel in building and will form a unique source of inspiration and reference for all those concerned with architecture in steel.
Download or read book Steel and Composite Structures written by Y. C. Wang and published by Taylor & Francis. This book was released on 2018-05-08 with total page 1099 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 150 papers representing the most recent international research findings on steel and composite structures. Including steel constructions; buckling and stability; codes; composite; control; fatigue and fracture; fire; impact; joints; maintenance; plates and shells; retrofitting; seismic; space structures; steel; structural analysis; structural components and assemblies; thin-walled structures; vibrations, and wind. A special session is dedicated on codification. A valuable source of information to researchers and practitioners in the field of steel and composite structures.
Download or read book Design of Steel Structures Vol 2 written by Ramchandra and published by Scientific Publishers. This book was released on 2015-02-01 with total page 1001 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eight edition of this book is based on Bridge Rules (Adopted in 1941, Revised in 1964 and Reprinted in 1989), and IS: 800-2007. Authors have distributed present text in the edition in thirty two chapters [that is, in Four parts (1) Steel Bridges and Influence Lines Diagrams for axial forces for the members of different types of truss-girders, (2) Special Steel Structures (3) Analysis of Structures specially, the method of tension co-efficients for determinate and indeterminate structures, (4) Aluminium structures. In order to emphasize that similar to various other subjects, this subject is also very vast. Therefore, space steel structures and stressed-skin steel structures have been described special features of this new-edition of this book may be mentioned as under (1) Historical development of different types of steel bridges details of some spans of longest spans of various types of steel bridges, (2) Design of Guyed Steel Chimneys (3) Instantaneous Centre of Rotation (ICR) and Plastic Analysis of Pitched slope (i.e., gable structure) and influences of axial forces and shear forces on the plastic moment of resistance of the member cross-sections.
Download or read book Steel Designers Manual Fifth Edition The Steel Construction Institute written by Institute Steel Construction and published by Wiley-Blackwell. This book was released on 1993-01-18 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic manual for structural steelwork design was first published in 1956. Since then, it has sold many thousands of copies worldwide. The fifth edition is the first major revision for 20 years and is the first edition to be fully based on limit state design, now used as the primary design method, and on the UK code of practice, BS 5950. It provides, in a single volume, all you need to know about structural steel design.
Download or read book Structural Analysis of Regular Multi Storey Buildings written by Karoly A. Zalka and published by CRC Press. This book was released on 2012-07-05 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: A sound and more modern Eurocode-based approach to design is the global approach, where the structures are considered as whole units, rather than to use traditional element-based design procedures. Although large frameworks and even whole buildings are now routinely analysed using computer packages, structural engineers do not always understand complex three-dimensional behaviour and thus manipulate the stiffness and the location of the bracing units to achieve an optimum structural arrangement. This guide deals with two categories of multi-storey structures. It can be used for the plane stress, stability and frequency analysis of individual bracing units such as frameworks, coupled shear walls and cores. In addition, and perhaps more importantly, it can be used for the three dimensional stress, stability and frequency analysis of whole buildings consisting of such bracing units. The closed-form solutions in the book may also prove to be useful at the preliminary design stage when quick checks are needed with different structural arrangements. Their usefulness cannot be overemphasized for checking the results of a finite element (computer-based) analysis when the input procedure involves tens of thousands of items of data and where mishandling one item of data may have catastrophic consequences. In addition to the critical load, the fundamental frequency, the maximum stresses and the top deflection of frameworks, coupled shear walls, cores and their spatial assemblies, a very important new piece of information is the "safety factor" of the structure (either a single unit or a whole building), which also acts as the performance indicator of the structure. MathCAD worksheets can be downloaded from the book’s accompanying website.
Download or read book Structural Analysis of Multi Storey Buildings written by Karoly A. Zalka and published by CRC Press. This book was released on 2020-03-02 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The structural analysis of multi-storey buildings can be carried out using discrete (computer-based) models or creating continuum models that lead to much simpler albeit normally approximate results. The book relies on the second approach and presents the theoretical background and the governing differential equations (for researchers) and simple closed-form solutions (for practicing structural engineers). The continuum models also help to understand how the stiffness and geometrical characteristics influence the three-dimensional behaviour of complex bracing systems. The back-of-the-envelop formulae for the maximum deflection and rotation, load shares, fundamental frequency and critical load facilitate quick global structural analysis for even large buildings. It is shown how the global critical load ratio can be used for monitoring the "health" of the structure acting as a performance indicator and "safety factor". Evaluating the results of over sixteen hundred calculations, the accuracy of the procedures is comprehensively demonstrated by comparing the discrete and continuum results. Nineteen worked examples illustrate the use of the methods, whose downloadable MathCad and Excel worksheets (www.crcpress.com/ 9780367350253) can also be used as templates for similar practical situations.
Download or read book Design of Structural Elements written by William McKenzie and published by Bloomsbury Publishing. This book was released on 2013-04-19 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic and well-respected textbook provides the most comprehensive coverage of the process of design for structural elements and features a wealth of practical problems and real-world examples. It introduces readers to the design requirements of the Eurocodes for the four most commonly used materials in construction: concrete, steel, timber and masonry, and illustrates the concepts and calculations necessary for the design of the most frequently encountered basic structural elements. It includes a detailed section on structural analysis. The scope of this text is wide, and its numerous examples, problems and easy-to-follow diagrams make it an ideal course text. This user-friendly text is an indispensable resource both for undergraduates in all years of civil engineering and structural engineering, in construction and architecture, and for practising engineers looking to refresh their knowledge.
Download or read book Handbook of Structural Engineering written by W.F. Chen and published by CRC Press. This book was released on 2005-02-28 with total page 1765 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuing the best-selling tradition of the Handbook of Structural Engineering, this second edition is a comprehensive reference to the broad spectrum of structural engineering, encapsulating the theoretical, practical, and computational aspects of the field. The contributors cover traditional and innovative approaches to analysis, design, and rehabilitation. New topics include: fundamental theories of structural dynamics; advanced analysis; wind- and earthquake-resistant design; design of prestressed structures; high-performance steel, concrete, and fiber-reinforced polymers; semirigid frame structures; structural bracing; and structural design for fire safety.
Download or read book Design of Steel Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2015-08-24 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the design concept of Eurocode 3 for steel structures in building construction, and their practical application. It especially comments on the regulations of the british National Annexes. Following a discussion of the basis of design, including the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively. Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will provide for a smooth transition from earlier national codes to the Eurocode.
Download or read book Modular Construction Using Light Steel Framing written by M.T. Gorgolewski and published by . This book was released on 2001 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi Storey Precast Concrete Framed Structures written by Kim S. Elliott and published by John Wiley & Sons. This book was released on 2013-10-07 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precast reinforced and prestressed concrete frames provide a high strength, stable, durable and robust solution for any multi-storey structure, and are widely regarded as a high quality, economic and architecturally versatile technology for the construction of multi-storey buildings. The resulting buildings satisfy a wide range of commercial and industrial needs. Precast concrete buildings behave in a different way to those where the concrete is cast in-situ, with the components subject to different forces and movements. These factors are explored in detail in the second edition of Multi-Storey Precast Concrete Framed Structures, providing a detailed understanding of the procedures involved in precast structural design. This new edition has been fully updated to reflect recent developments, and includes many structural calculations based on EUROCODE standards. These are shown in parallel with similar calculations based on British Standards to ensure the designer is fully aware of the differences required in designing to EUROCODE standards. Civil and structural engineers as well as final year undergraduate and postgraduate students of civil and structural engineering will all find this book to be thorough overview of this important construction technology.
Download or read book Elements of Stress Analysis written by Jacques Heyman and published by Cambridge University Press. This book was released on 1982-04 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyses problems in elasticity theory, highlighting elements of structural analysis in a simple and straightforward way.
Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2023-01-06 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 1999: The Bridge Engineering Handbook is a unique, comprehensive, and state-of-the-art reference work and resource book covering the major areas of bridge engineering with the theme "bridge to the 21st century." This third volume includes sections covering construction and maintenance, special topics, and worldwide practice.
Download or read book Steel A New and Traditional Material for Building written by Dan Dubina and published by CRC Press. This book was released on 2006-08-17 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an era of new, composite materials and high-strength concrete, and with an increasing demand for sustainable building technologies, the importance of the role of steel in construction is being challenged.. Nonetheless, steel can successfully be used to refurbish and retrofit historical buildings, as well as being a material of choice for new building structures. Steel can effectively be combined with a variety of other materials to obtain structures which are characterized by a high-performance response under different types of static and dynamic activity. The proceedings contains nine keynote lectures from international experts, and is further divided into five sections: calculation models and methods; studies and advances in design codes; steel and mixed building technology; steel under exceptional actions; and steel in remarkable constructions and refurbishment.
Download or read book Steel Structures written by T.J. MacGinley and published by CRC Press. This book was released on 2002-12-24 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this well-known book provides a series of practical design studies of a range of steel structures. It is extensively revised and contains numerous worked examples, including comparative designs for many structures.
