Download or read book Modern Completion Technology for Oil and Gas Wells written by Ding Zhu and published by McGraw Hill Professional. This book was released on 2018-06-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest oil and gas well completion technologies and best practices Increase oil and gas production and maximize revenue generation using the start-to-finish completion procedures contained in this hands-on guide. Written by a pair of energy production experts, Modern Completion Technology for Oil and Gas Wells introduces each technique, shows how it works, and teaches how to deploy it effectively. You will get full explanations of the goals of completion along with detailed examples and case studies that clearly demonstrate how to successfully meet those goals. Modern production methods such as hydraulic fracturing, acid simulation, and intelligent well completions are thoroughly covered. Coverage includes: •Functions and goals of oil and gas well completion •Well completion fundamentals •Completion impact in near-wellbore region to inflow performance •Completions for fracturing •Completions for acid stimulation •Intelligent well completion: downhole monitoring and flow control •Completion designs for production and injection optimization

Download or read book Advanced Well Completion Engineering written by Wan Renpu and published by Gulf Professional Publishing. This book was released on 2011-08-23 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. Matchless in-depth technical advice for achieving operational excellence with advance solutions.

Download or read book Well Completion and Servicing written by Denis Perrin and published by Editions Technips. This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides technical information on well completion, from drilling in the pay zone to production start-up. It also covers the main methods for artificial lift, and well servicing. The reader will find a discussion of the concepts and equipment that are indispensable for scheduling and designing completion and servicing operations. The book's chief objective is to provide comprehensive information to those who require a thorough understanding of the completion engineer's aims and the resources he needs for oil field development and production. It is particularly well-suited to the needs of the specialist whose field of activity is located upstream from oil and gas production, e.g., geologists, geophysicists, and reservoir, drilling or production facility engineers. It should also be of use to oil company administrative personnel, including those in management, and those in the insurance and legal departments. The text is fully illustrated, thus helping the reader grasp the basics of this highly technical field.Contents: 1. Introduction to completion. 1.1. Main factors influencing completion design. 1.2. Overall approach to a well's flow capacity. 1.3. Major types of completion configurations. 1.4. Main phases in completion. 2. Connecting the pay zone and the borehole. 2.1. Drilling and casing the pay zone. 2.2. Evaluating and restoring the cement job. 2.3. Perforating. 2.4. Treating the pay zone. 2.5. The special case of horizontal wells. 3. The equipment of naturally flowing wells. 3.1. General configuration of flowing well equipment. 3.2. The production wellhead. 3.3. The production string or tubing. 3.4. Packers. 3.5. Downhole equipment. 3.6. Subsurface safety valves. 3.7. Running procedure. 4. Artificial lift. 4.1. Pumping. 4.2. Gas lift. 4.3. Choosing an artificial lift process. 5. Well servicing and workover. 5.1. Main types of operations. 5.2. Light operations on live wells. 5.3. Heavy operations on live wells. 5.4. Operations on killed wells. 5.5. Special cases. Bibliography. Index.

Download or read book Offshore Well Completion and Stimulation written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-06-08 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the public is generally aware of the use of hydraulic fracturing for unconventional resource development onshore, it is less familiar with the well completion and stimulation technologies used in offshore operations, including hydraulic fracturing, gravel packs, "fracpacks," and acid stimulation. Just as onshore technologies have improved, these well completion and stimulation technologies for offshore hydrocarbon resource development have progressed over many decades. To increase public understanding of these technologies, the National Academies of Sciences, Engineering, and Medicine established a planning committee to organize and convene a workshop on Offshore Well Completion and Stimulation: Using Hydraulic Fracturing and Other Technologies on October 2-3, 2017, in Washington, DC. This workshop examined the unique features about operating in the U.S. offshore environment, including well completion and stimulation technologies, environmental considerations and concerns, and health and safety management. Participants from across government, industry, academia, and nonprofit sectors shared their perspectives on operational and regulatory approaches to mitigating risks to the environment and to humans in the development of offshore resources. This publication summarizes the presentations and discussions from the workshop.

Download or read book Drilling and Completion in Petroleum Engineering written by Xinpu Shen and published by CRC Press. This book was released on 2011-10-19 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern petroleum and petrotechnical engineering is increasingly challenging due to the inherently scarce and decreasing number of global petroleum resources. Exploiting these resources efficiently will require researchers, scientists, engineers and other practitioners to develop innovative mathematical solutions to serve as basis for new asset deve

Download or read book Petroleum Engineering written by Carl Gatlin and published by . This book was released on 1965 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Fracturing written by Michael J. Economides and published by . This book was released on 2007 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Natural gas is rapidly emerging as a premier fuel for the world economy with markedly increasing trans-national trade. With proven reserves far exceeding those for crude oil, natural gas is likely to be around for centuries. This is a book about enhancing natural gas production using one of the most important and widespread well completion technologies -- hydraulic fracturing. The book addresses the way that natural gas is produced from reservoirs and then describes diagnostic techniques that can pinpoint whether the well is producing as it should or whether intervention should be undertaken, which is the central theme of this book."--Back cover.

Download or read book Well Completion Design written by Jonathan Bellarby and published by Elsevier. This book was released on 2009-04-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. * Course book based on course well completion design by TRACS International * Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world. * Full colour

Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Petroleum Production Engineering written by Boyun Guo, and published by Gulf Professional Publishing. This book was released on 2017-02-10 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Production Engineering, Second Edition, updates both the new and veteran engineer on how to employ day-to-day production fundamentals to solve real-world challenges with modern technology. Enhanced to include equations and references with today’s more complex systems, such as working with horizontal wells, workovers, and an entire new section of chapters dedicated to flow assurance, this go-to reference remains the most all-inclusive source for answering all upstream and midstream production issues. Completely updated with five sections covering the entire production spectrum, including well productivity, equipment and facilities, well stimulation and workover, artificial lift methods, and flow assurance, this updated edition continues to deliver the most practical applied production techniques, answers, and methods for today’s production engineer and manager. In addition, updated Excel spreadsheets that cover the most critical production equations from the book are included for download. Updated to cover today’s critical production challenges, such as flow assurance, horizontal and multi-lateral wells, and workovers Guides users from theory to practical application with the help of over 50 online Excel spreadsheets that contain basic production equations, such as gas lift potential, multilateral gas well deliverability, and production forecasting Delivers an all-inclusive product with real-world answers for training or quick look up solutions for the entire petroleum production spectrum

Download or read book Well Control for Completions and Interventions written by Howard Crumpton and published by Gulf Professional Publishing. This book was released on 2018-04-04 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Well Control for Completions and Interventions explores the standards that ensure safe and efficient production flow, well integrity and well control for oil rigs, focusing on the post-Macondo environment where tighter regulations and new standards are in place worldwide. Too many training facilities currently focus only on the drilling side of the well’s cycle when teaching well control, hence the need for this informative guide on the topic. This long-awaited manual for engineers and managers involved in the well completion and intervention side of a well’s life covers the fundamentals of design, equipment and completion fluids. In addition, the book covers more important and distinguishing components, such as well barriers and integrity envelopes, well kill methods specific to well completion, and other forms of operations that involve completion, like pumping and stimulation (including hydraulic fracturing and shale), coiled tubing, wireline, and subsea intervention. Provides a training guide focused on well completion and intervention Includes coverage of subsea and fracturing operations Presents proper well kill procedures Allows readers to quickly get up-to-speed on today’s regulations post-Macondo for well integrity, barrier management and other critical operation components

Download or read book Petroleum Production Systems written by Michael J. Economides and published by Pearson Education. This book was released on 2013 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by four leading experts, this edition thoroughly introduces today's modern principles of petroleum production systems development and operation, considering the combined behaviour of reservoirs, surface equipment, pipeline systems, and storage facilities. The authors address key issues including artificial lift, well diagnosis, matrix stimulation, hydraulic fracturing and sand control. They show how to optimise systems for diverse production schedules using queuing theory, as well as linear and dynamic programming. Throughout, they provide both best practices and rationales, fully illuminating the exploitation of unconventional oil and gas reservoirs. Updates include: Extensive new coverage of hydraulic fracturing, including high permeability fracturing New sand and water management techniques * An all-new chapter on Production Analysis New coverage of digital reservoirs and self-learning techniques New skin correlations and HW flow techniques

Download or read book The environmental aspects of modern oil and gas development written by United States. Congress. House. Committee on Resources. Subcommittee on Energy and Mineral Resources and published by . This book was released on 2003 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Emergency Response Management of Offshore Oil Spills written by Nicholas P. Cheremisinoff and published by John Wiley & Sons. This book was released on 2010-12-28 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: EMERGENCY RESPONSE MANAGEMENT OF OFFSHORE Examines the Deepwater Horizon disaster and offers processes for safety and environmental protection Though renewable energy is a growing piece of the energy “pie,” fossil fuels still dominate our energy supplies and will continue to do so for decades. This makes offshore drilling, especially in places like the Gulf of Mexico and North Sea, extremely important for the future of the world’s energy supply. Unfortunately, the world has been witnessing, over and over again, accidents, deadly explosions, spills, and environmental disasters that could have been avoided with proper safety and environmental processes put in place. The Deepwater Horizon catastrophe is the largest offshore oil spill in U.S. history and an ecological nightmare of epic proportions. Emergency Response Management of Offshore Oil Spills aids in the response of this and future disasters by providing this handy reference volume for engineers, managers, and other emergency responders. This timely publication outlines the toxic nature of crude oil, covering properties of crude oil, chemical composition, toxicity to humans and marine life, and investigates the impact of oil spills from historical case studies. The current arsenals available to address oil spills, such as dispersants, absorbing booms, skimming, and other methods, are also discussed. Technologies that are rapidly being developed to address the Gulf Oil Spill are considered, along with extensive information on chemical protective clothing, air monitoring, respiratory protection, management of waste, and much more. The book concludes with a chapter discussing responsible care and takes a critical look at the reasons why the Deepwater Horizon rig catastrophe happened and examines the follow-up that ensued after the incident. Emergency Response Management of Offshore Oil Spills provides: Examples of 26 major oil spills ranked from largest to smallest, describing each incident and the amount of oil spilled Recommendations and guidance on proper air monitoring methods Suggestions related to protective garments such as respirators Comparative product information on chemical dispersants, shoreline bleaching and cleaning chemicals Detailed toxicity data for humans and marine life Discussions in the areas of deficiencies in responding to spills and why the oil industry needs to be more responsive to developing technologies Hazardous materials protocols, including OSHA- and EPA- recommended safe work practices for dealing with hazardous materials

Download or read book Handbook of Offshore Oil and Gas Operations written by James G. Speight and published by Elsevier. This book was released on 2014-10-22 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Offshore Oil and Gas Operations is an authoritative source providing extensive up-to-date coverage of the technology used in the exploration, drilling, production, and operations in an offshore setting. Offshore oil and gas activity is growing at an expansive rate and this must-have training guide covers the full spectrum including geology, types of platforms, exploration methods, production and enhanced recovery methods, pipelines, and envinronmental managment and impact, specifically worldwide advances in study, control, and prevention of the industry's impact on the marine environment and its living resources. In addition, this book provides a go-to glossary for quick reference. Handbook of Offshore Oil and Gas Operations empowers oil and gas engineers and managers to understand and capture on one of the fastest growing markets in the energy sector today. Quickly become familiar with the oil and gas offshore industry, including deepwater operations Understand the full spectrum of the business, including environmental impacts and future challenges Gain knowledge and exposure on critical standards and real-world case studies

Download or read book Composition and Properties of Drilling and Completion Fluids written by Ryen Caenn and published by Gulf Professional Publishing. This book was released on 2011-09-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum industry in general has been dominated by engineers and production specialists. The upstream segment of the industry is dominated by drilling/completion engineers. Usually, neither of those disciplines have a great deal of training in the chemistry aspects of drilling and completing a well prior to its going on production. The chemistry of drilling fluids and completion fluids have a profound effect on the success of a well. For example, historically the drilling fluid costs to drill a well have averaged around 7% of the overall cost of the well, before completion. The successful delivery of up to 100% of that wellbore, in many cases may be attributable to the fluid used. Considered the "bible" of the industry, Composition and Properties of Drilling and Completion Fluids, first written by Walter Rogers in 1948, and updated on a regular basis thereafter, is a key tool to achieving successful delivery of the wellbore. In its Sixth Edition, Composition and Properties of Drilling and Completion Fluids has been updated and revised to incorporate new information on technology, economic, and political issues that have impacted the use of fluids to drill and complete oil and gas wells. With updated content on Completion Fluids and Reservoir Drilling Fluids, Health, Safety & Environment, Drilling Fluid Systems and Products, new fluid systems and additives from both chemical and engineering perspectives, Wellbore Stability, adding the new R&D on water-based muds, and with increased content on Equipment and Procedures for Evaluating Drilling Fluid Performance in light of the advent of digital technology and better manufacturing techniques, Composition and Properties of Drilling and Completion Fluids has been thoroughly updated to meet the drilling and completion engineer's needs. Explains a myriad of new products and fluid systems Cover the newest API/SI standards New R&D on water-based muds New emphases on Health, Safety & Environment New Chapter on waste management and disposal

Download or read book Analysis for Well Completion written by Mark Longley and published by Petroleum Extension Service. This book was released on 1984 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series was reviewed by a subcommittee of the API Advisory Committee for the School of Production Technology and approved by the instructor of the topic covered. Each book is divided into sections that consist of learning objectives, instructional text, and a test. A glossary and an answer key are included. Surveys standard analysis of several types of oilfield data affecting well completion. Describes the characteristics of reservoirs and their fluids, explains methods for gathering data on those characteristics, and discusses ways in which those data are interpreted.