Download or read book Chemical Engineering written by Morton Denn and published by Cambridge University Press. This book was released on 2011-09-30 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Chemical engineering is the field of applied science that employs physical, chemical, and biological rate processes for the betterment of humanity'. This opening sentence of Chapter 1 has been the underlying paradigm of chemical engineering. Chemical Engineering: An Introduction is designed to enable the student to explore the activities in which a modern chemical engineer is involved by focusing on mass and energy balances in liquid-phase processes. Problems explored include the design of a feedback level controller, membrane separation, hemodialysis, optimal design of a process with chemical reaction and separation, washout in a bioreactor, kinetic and mass transfer limits in a two-phase reactor, and the use of the membrane reactor to overcome equilibrium limits on conversion. Mathematics is employed as a language at the most elementary level. Professor Morton M. Denn incorporates design meaningfully; the design and analysis problems are realistic in format and scope.
Download or read book Modern Chemical Enhanced Oil Recovery written by James J.Sheng and published by Gulf Professional Publishing. This book was released on 2010-11-25 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crude oil development and production in U.S. oil reservoirs can include up to three distinct phases: primary, secondary, and tertiary (or enhanced) recovery. During primary recovery, the natural pressure of the reservoir or gravity drive oil into the wellbore, combined with artificial lift techniques (such as pumps) which bring the oil to the surface. But only about 10 percent of a reservoir's original oil in place is typically produced during primary recovery. Secondary recovery techniques to the field's productive life generally by injecting water or gas to displace oil and drive it to a production wellbore, resulting in the recovery of 20 to 40 percent of the original oil in place. In the past two decades, major oil companies and research organizations have conducted extensive theoretical and laboratory EOR (enhanced oil recovery) researches, to include validating pilot and field trials relevant to much needed domestic commercial application, while western countries had terminated such endeavours almost completely due to low oil prices. In recent years, oil demand has soared and now these operations have become more desirable. This book is about the recent developments in the area as well as the technology for enhancing oil recovery. The book provides important case studies related to over one hundred EOR pilot and field applications in a variety of oil fields. These case studies focus on practical problems, underlying theoretical and modelling methods, operational parameters (e.g., injected chemical concentration, slug sizes, flooding schemes and well spacing), solutions and sensitivity studies, and performance optimization strategies. The book strikes an ideal balance between theory and practice, and would be invaluable to academicians and oil company practitioners alike. - Updated chemical EOR fundamentals providing clear picture of fundamental concepts - Practical cases with problems and solutions providing practical analogues and experiences - Actual data regarding ranges of operation parameters providing initial design parameters - Step-by-step calculation examples providing practical engineers with convenient procedures
Download or read book Process Advancement in Chemistry and Chemical Engineering Research written by Gennady E. Zaikov and published by CRC Press. This book was released on 2016-01-06 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains peer-reviewed chapters and original research on chemistry and its broad range of applications in chemical engineering. Covering both theoretical and practical applications of modern chemistry, the book presents a different aspects of chemistry and chemical engineering. The book includes the most significant new research papers
Download or read book Statistics for Chemical and Process Engineers written by Yuri A.W. Shardt and published by Springer. This book was released on 2015-10-16 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: A coherent, concise and comprehensive course in the statistics needed for a modern career in chemical engineering; covers all of the concepts required for the American Fundamentals of Engineering examination. This book shows the reader how to develop and test models, design experiments and analyse data in ways easily applicable through readily available software tools like MS Excel® and MATLAB®. Generalized methods that can be applied irrespective of the tool at hand are a key feature of the text. The reader is given a detailed framework for statistical procedures covering: · data visualization; · probability; · linear and nonlinear regression; · experimental design (including factorial and fractional factorial designs); and · dynamic process identification. Main concepts are illustrated with chemical- and process-engineering-relevant examples that can also serve as the bases for checking any subsequent real implementations. Questions are provided (with solutions available for instructors) to confirm the correct use of numerical techniques, and templates for use in MS Excel and MATLAB can also be downloaded from extras.springer.com. With its integrative approach to system identification, regression and statistical theory, Statistics for Chemical and Process Engineers provides an excellent means of revision and self-study for chemical and process engineers working in experimental analysis and design in petrochemicals, ceramics, oil and gas, automotive and similar industries and invaluable instruction to advanced undergraduate and graduate students looking to begin a career in the process industries.
Download or read book General Chemistry for Engineers written by Jeffrey Gaffney and published by Elsevier. This book was released on 2017-11-13 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: General Chemistry for Engineers explores the key areas of chemistry needed for engineers. This book develops material from the basics to more advanced areas in a systematic fashion. As the material is presented, case studies relevant to engineering are included that demonstrate the strong link between chemistry and the various areas of engineering. - Serves as a unique chemistry reference source for professional engineers - Provides the chemistry principles required by various engineering disciplines - Begins with an 'atoms first' approach, building from the simple to the more complex chemical concepts - Includes engineering case studies connecting chemical principles to solving actual engineering problems - Links chemistry to contemporary issues related to the interface between chemistry and engineering practices
Download or read book Introduction to Chemical Engineering Computing written by Bruce A. Finlayson and published by John Wiley & Sons. This book was released on 2012-07-31 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Step-by-step instructions enable chemical engineers to master key software programs and solve complex problems Today, both students and professionals in chemical engineering must solve increasingly complex problems dealing with refineries, fuel cells, microreactors, and pharmaceutical plants, to name a few. With this book as their guide, readers learn to solve these problems using their computers and Excel®, MATLAB, Aspen Plus, and COMSOL Multiphysics. Moreover, they learn how to check their solutions and validate their results to make sure they have solved the problems correctly. Now in its Second Edition, Introduction to Chemical Engineering Computing is based on the author's firsthand teaching experience. As a result, the emphasis is on problem solving. Simple introductions help readers become conversant with each program and then tackle a broad range of problems in chemical engineering, including: Equations of state Chemical reaction equilibria Mass balances with recycle streams Thermodynamics and simulation of mass transfer equipment Process simulation Fluid flow in two and three dimensions All the chapters contain clear instructions, figures, and examples to guide readers through all the programs and types of chemical engineering problems. Problems at the end of each chapter, ranging from simple to difficult, allow readers to gradually build their skills, whether they solve the problems themselves or in teams. In addition, the book's accompanying website lists the core principles learned from each problem, both from a chemical engineering and a computational perspective. Covering a broad range of disciplines and problems within chemical engineering, Introduction to Chemical Engineering Computing is recommended for both undergraduate and graduate students as well as practicing engineers who want to know how to choose the right computer software program and tackle almost any chemical engineering problem.
Download or read book Advanced Process Control and Simulation for Chemical Engineers written by Hossein Ghanadzadeh Gilani and published by CRC Press. This book was released on 2016-04-19 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a modern view of process control in the context of today's technology. It provides innovative chapters on the growth of educational, scientific, and industrial research among chemical engineers. It presents experimental data on thermodynamics and provides a broad understanding of the main computational techniques used for chemical
Download or read book Microreactors written by Wolfgang Ehrfeld and published by . This book was released on 2000 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents general aspects of microreaction technology. Discusses in detail microfabrication techniques, micromixers, micro heat exchangers, microseparation systems, micosystems for liquid and gas phase reactions, gas/liquid microreactors, and microsystems for energy generation, catalyst, and material screening.
Download or read book Advanced Data Analysis and Modelling in Chemical Engineering written by Denis Constales and published by Elsevier. This book was released on 2016-08-23 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Data Analysis and Modeling in Chemical Engineering provides the mathematical foundations of different areas of chemical engineering and describes typical applications. The book presents the key areas of chemical engineering, their mathematical foundations, and corresponding modeling techniques. Modern industrial production is based on solid scientific methods, many of which are part of chemical engineering. To produce new substances or materials, engineers must devise special reactors and procedures, while also observing stringent safety requirements and striving to optimize the efficiency jointly in economic and ecological terms. In chemical engineering, mathematical methods are considered to be driving forces of many innovations in material design and process development. - Presents the main mathematical problems and models of chemical engineering and provides the reader with contemporary methods and tools to solve them - Summarizes in a clear and straightforward way, the contemporary trends in the interaction between mathematics and chemical engineering vital to chemical engineers in their daily work - Includes classical analytical methods, computational methods, and methods of symbolic computation - Covers the latest cutting edge computational methods, like symbolic computational methods
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book International Benchmarking of U S Chemical Engineering Research Competitiveness written by National Research Council and published by National Academies Press. This book was released on 2007-07-12 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than $400 billion worth of products rely on innovations in chemistry. Chemical engineering, as an academic discipline and profession, has enabled this achievement. In response to growing concerns about the future of the discipline, International Benchmarking of U.S. Chemical Engineering Research Competitiveness gauges the standing of the U.S. chemical engineering enterprise in the world. This in-depth benchmarking analysis is based on measures including numbers of published papers, citations, trends in degrees conferred, patent productivity, and awards. The book concludes that the United States is presently, and is expected to remain, among the world's leaders in all subareas of chemical engineering research. However, U.S. leadership in some classical and emerging subareas will be strongly challenged. This critical analysis will be of interest to practicing chemical engineers, professors and students in the discipline, economists, policy makers, major research university administrators, and executives in industries dependent upon innovations in chemistry.
Download or read book Basic Principles and Calculations in Chemical Engineering written by David Mautner Himmelblau and published by . This book was released on 1967 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Engineering Explained written by David Shallcross and published by Royal Society of Chemistry. This book was released on 2017-12-04 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for those less comfortable with science and mathematics, this text introduces the major chemical engineering topics for non-chemical engineers. With a focus on the practical rather than the theoretical, the reader will obtain a foundation in chemical engineering that can be applied directly to the workplace. By the end of this book, the user will be aware of the major considerations required to safely and efficiently design and operate a chemical processing facility. Case studies are included throughout, building a real-world connection. This book is ideal for professionals working with chemical engineers, and decision makers in chemical engineering industries.
Download or read book Beyond the Molecular Frontier written by National Research Council and published by National Academies Press. This book was released on 2003-03-19 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry and chemical engineering have changed significantly in the last decade. They have broadened their scopeâ€"into biology, nanotechnology, materials science, computation, and advanced methods of process systems engineering and controlâ€"so much that the programs in most chemistry and chemical engineering departments now barely resemble the classical notion of chemistry. Beyond the Molecular Frontier brings together research, discovery, and invention across the entire spectrum of the chemical sciencesâ€"from fundamental, molecular-level chemistry to large-scale chemical processing technology. This reflects the way the field has evolved, the synergy at universities between research and education in chemistry and chemical engineering, and the way chemists and chemical engineers work together in industry. The astonishing developments in science and engineering during the 20th century have made it possible to dream of new goals that might previously have been considered unthinkable. This book identifies the key opportunities and challenges for the chemical sciences, from basic research to societal needs and from terrorism defense to environmental protection, and it looks at the ways in which chemists and chemical engineers can work together to contribute to an improved future.
Download or read book Preparing Chemists and Chemical Engineers for a Globally Oriented Workforce written by National Research Council and published by National Academies Press. This book was released on 2004-09-02 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Globalizationâ€"the flow of people, goods, services, capital, and technology across international bordersâ€"is significantly impacting the chemistry and chemical engineering professions. Chemical companies are seeking new ideas, a trained workforce, and new market opportunities regardless of geographic location. During an October 2003 workshop, leaders in chemistry and chemical engineering from industry, academia, government, and private funding organizations explored the implications of an increasingly global research environment for the chemistry and chemical engineering workforce. The workshop presentations described deficiencies in the current educational system and the need to create and sustain a globally aware workforce in the near future. The goal of the workshop was to inform the Chemical Sciences Roundtable, which provides a science-oriented, apolitical forum for leaders in the chemical sciences to discuss chemically related issues affecting government, industry, and universities.
Download or read book Chemical and Biochemical Engineering written by Ali Pourhashemi and published by CRC Press. This book was released on 2015-01-28 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book facilitates the study of problematic chemicals in such applications as chemical fate modeling, chemical process design, and experimental design. This volume provides comprehensive coverage of modern biochemical engineering, detailing the basic concepts underlying the behavior of bioprocesses as well as advances in bioprocess and biochemic
Download or read book Green Chemical Engineering written by S. Suresh and published by CRC Press. This book was released on 2014-12-18 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores a balance between energy and material, applied to chemical reactors with catalysis, to achieve a given purpose. It includes the fundamentals of chemical reaction engineering and explains reactor design fundamentals. The book spans the full range-from the fundamentals of kinetics and heterogeneous catalysis via modern experimental and theoretical results of model studies-to their equivalent large-scale industrial production processes. It also includes significant developments, with recent research case studies and literature.
