Download or read book Modelling Simulation and Optimization of Industrial Fixed Bed Catalytic Reactors written by S. S. E. H. Elnashaie and published by CRC Press. This book was released on 1994-03-07 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of mathematical modelling of gas-solid catalytic reactors in industry is still limited. By consolidating progress in the understanding of catalytic processes, this book applies these fundamental advances to the development of models for design, simulation and optimization of industrial reactors.

Download or read book Modelling Simulation and Optimization of Industrial Fixed Bed Catalytic Reactors written by S.S.E.H. Elnashaie and published by Routledge. This book was released on 2022-01-26 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last two decades impressive advances have been made toward the understanding and quantitative description of the kinetics. Despite these advances, however, the use of mathematical modelling of gas-solid catalytic reactors in industry is still limited. By consolidating progress in the understanding of catalytic processes, this book applies these fundamental advances to the development of models for design, simulation and optimization of industrial reactors. Paying particular attention to the verification of the developed models against industrial data, these models are used to optimize the performance of many practical reactor cases. Using a systems approach for the development of the different components and the resulting overall models, the book is easy to read and gives an insight into the behaviour of these complex industrial systems. In addition, the practical relevance of bifurcation, instability and chaos to industrial reactors is briefly discussed.

Download or read book Theoretical Models and Experimental Approaches in Physical Chemistry written by A. K. Haghi and published by CRC Press. This book was released on 2018-10-01 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume presents an up-to-date review of modern materials and physical chemistry concepts, issues, and recent advances in the field. It presents a modern theoretical and experimental approach in applied physical chemistry. The volume discusses the developments of advanced chemical products and respective tools to characterize and predict the chemical material properties and behavior. With chapters from distinguished scientists and engineers from key institutions worldwide, the volume provides understanding through numerous examples and practical applications drawn from research and development chemistry. It emphasizes the intersection of chemistry, math, physics, and the resulting applications across many disciplines of science and explores applied physical chemistry principles in specific areas. At the same time, each topic is framed within the context of a broader more interdisciplinary approach, demonstrating its relationship and interconnectedness to other areas. This new book fills a gap within modeling texts, focusing on applications across a broad range of disciplines, and presents information on many important problems in physical chemistry. These investigations are accompanied by real-life applications in practice.

Download or read book Applied Chemistry and Chemical Engineering Volume 4 written by A. K. Haghi and published by CRC Press. This book was released on 2017-12-22 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Chemistry and Chemical Engineering, Volume 4: Experimental Techniques and Methodical Developments provides a detailed yet easy-to-follow treatment of various techniques useful for characterizing the structure and properties of engineering materials. This timely volume provides an overview of new methods and presents experimental research in applied chemistry using modern approaches. Each chapter describes the principle of the respective method as well as the detailed procedures of experiments with examples of actual applications and then goes on to demonstrate the advantage and disadvantages of each physical technique. Thus, readers will be able to apply the concepts as described in the book to their own experiments. The book is broken into several subsections: Polymer Chemistry and Technology Computational Approaches Clinical Chemistry and Bioinformatics Special Topics This volume presents research and reviews and information on implementing and sustaining interdisciplinary studies in science, technology, engineering, and mathematics.

Download or read book Complexity and Complex Thermo Economic Systems written by Stanislaw Sieniutycz and published by Elsevier. This book was released on 2019-11-24 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complexity and Complex Thermoeconomic Systems describes the properties of complexity and complex thermo-economic systems as the consequence of formulations, definitions, tools, solutions and results consistent with the best performance of a system. Applying to complex systems contemporary advanced techniques, such as static optimization, optimal control, and neural networks, this book treats the systems theory as a science of general laws for functional integrities. It also provides a platform for the discussion of various definitions of complexity, complex hierarchical structures, self-organization examples, special references, and historical issues. This book is a valuable reference for scientists, engineers and graduated students in chemical, mechanical, and environmental engineering, as well as those in physics, ecology and biology, helping them better understand the complex thermodynamic systems and enhance their technical skills in research. - Provides a lucid presentation of the dynamical properties of thermoeconomic systems - Includes original graphical material that illustrates the properties of complex systems - Written by a first-class expert in the field of advanced methods in thermodynamics

Download or read book Composition Modulation of Catalytic Reactors written by P L Silverton and published by CRC Press. This book was released on 1998-11-26 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composition modulation is a method of operating a catalytic reactor to improve catalyst activity or selectivity and has been under study for more than 25 years. In the last few years, several commercial applications have been realized and more will certainly appear. A large international research literature now exists. This book examines this literature and attempts to organize and analyze it with the intent of identifying the magnitude of improvements possible, why modulation is effective, and what questions remain unanswered. Topics include hydrogenation, oxidation, reduction, and polymerization reactions for NOX, SOX, NH3, and hydrocarbons.

Download or read book Handbook of Membrane Reactors written by Angelo Basile and published by Elsevier. This book was released on 2013-02-08 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane reactors are increasingly replacing conventional separation, process and conversion technologies across a wide range of applications. Exploiting advanced membrane materials, they offer enhanced efficiency, are very adaptable and have great economic potential. There has therefore been increasing interest in membrane reactors from both the scientific and industrial communities, stimulating research and development. The two volumes of the Handbook of membrane reactors draw on this research to provide an authoritative review of this important field.Volume 1 explores fundamental materials science, design and optimisation, beginning with a review of polymeric, dense metallic and composite membranes for membrane reactors in part one. Polymeric and nanocomposite membranes for membrane reactors, inorganic membrane reactors for hydrogen production, palladium-based composite membranes and alternatives to palladium-based membranes for hydrogen separation in membrane reactors are all discussed. Part two goes on to investigate zeolite, ceramic and carbon membranes and catalysts for membrane reactors in more depth. Finally, part three explores membrane reactor modelling, simulation and optimisation, including the use of mathematical modelling, computational fluid dynamics, artificial neural networks and non-equilibrium thermodynamics to analyse varied aspects of membrane reactor design and production enhancement.With its distinguished editor and international team of expert contributors, the two volumes of the Handbook of membrane reactors provide an authoritative guide for membrane reactor researchers and materials scientists, chemical and biochemical manufacturers, industrial separations and process engineers, and academics in this field. - Considers polymeric, dense metallic and composite membranes for membrane reactors - Discusses cereamic and carbon for membrane reactors in detail - Reactor modelling, simulation and optimisation is also discussed

Download or read book Applied Chemistry and Chemical Engineering Volume 2 written by A. K. Haghi and published by CRC Press. This book was released on 2017-12-22 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers many important aspects of applied chemistry and chemical engineering, focusing on three main aspects: principles, methodology and evaluation methods. It presents a selection of chapters on recent developments of theoretical, mathematical, and computational conceptions, as well as chapters on modeling and simulation of specific research themes covering applied chemistry and chemical engineering. This book attempts to bridge the gap between classical analysis and modern applications. Covering a selection of topics within the field of applied chemistry and chemical engineering, the book is divided into several parts: polymer chemistry and technology bioorganic and biological chemistry nanoscale technology selected topics This book is the second of the two-volume series Applied Chemistry and Chemical Engineering. The first volume is Volume 1: Mathematical and Analytical Techniques.

Download or read book Handbook of Food Process Modeling and Statistical Quality Control written by Mustafa Ozilgen and published by CRC Press. This book was released on 1998-09-16 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental techniques of mathematical modeling of processes essential to the food industry are explained in this text. Instead of concentrating on detailed theoretical analysis and mathematical derivations, important mathematical prerequisites are presented in summary tables. Readers' attention is focused on understanding modeling techniques, rather than the finer mathematical points. Topics covered include modeling of transport phenomena, kinetic processes, and food engineering operations. Statistical process analysis and quality control as applied to the food industry are also discussed. The book's main feature is the large number of worked examples presented throughout. Included are examples from almost every conceivable food process, most of which are based on real data given in the many references. Each example is followed by a clear, step- by-step worked solution.

Download or read book Chemical Science and Engineering Technology written by Devrim Balköse and published by CRC Press. This book was released on 2019-03-19 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the major areas of emphasis in the field of in chemical science and engineering technology in recent years has been interdisciplinary research, a trend that promises new insights and innovations rooted in cross-disciplinary collaboration. This volume is designed for stepping beyond traditional disciplinary boundaries and applying knowledge and insights from multiple fields. This book, Chemical Science and Engineering Technology: Perspectives on Interdisciplinary Research, provides a selection of chapters on interdisciplinary research in chemical science and engineering technology, taking a conceptual, and practical approach. The book includes case studies and supporting technologies and also explains the conceptual thinking behind current uses and potential uses not yet implemented. International experts with countless years of experience lend this volume credibility.

Download or read book Membrane Reactors written by Andreas Seidel-Morgenstern and published by John Wiley & Sons. This book was released on 2010-03-09 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative work represents a broad treatment of the field, including the basic principles of membrane reactors, a comparative study of these and conventional fixed-bed reactors or multi-tube reactors, modeling, industrial applications, and emerging applications -- all based on case studies and model reactions with a stringent mathematical framework. The significant progress made over the last few years in this inherently hot multidisciplinary field is summarized in a competent manner, such that the novice can grasp the elementary concepts, while professionals can familiarize themselves with the latest developments in the area. For the industrial practitioner, this practical book covers all important current and potential future applications.

Download or read book Hydrodynamics Mass and Heat Transfer in Chemical Engineering written by Andrei D. Polyanin and published by CRC Press. This book was released on 2001-09-27 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics, Mass and Heat Transfer in Chemical Engineering contains a concise and systematic exposition of fundamental problems of hydrodynamics, heat and mass transfer, and physicochemical hydrodynamics, which constitute the theoretical basis of chemical engineering in science. Areas covered include: fluid flows; processes of chemical engineeri

Download or read book Liquid and Vapour Flows in Porous Bodies written by N.V. Churaev and published by Routledge. This book was released on 2018-05-02 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adopts a completely original approach to the study of processes of mass transfer. In contrast to the usual approach, based on the concept of continuum media and the theory of heat and mass transfer, the topic is considered from a new viewpoint, taking into account the heterogeneous dispersal state of porous bodies. The author bases his discussion on the theory of surface forces and microhydrodynamic analysis of the processes of mass transport of gases, liquids and vapors, providing the reader with a systematic account of liquid/solid and gas/solid interfaces. Topics treated in this book include structural peculiarities, equilibrium and properties of liquids in porous bodies. Various mechanisms of mass transfer are considered, including liquid flow in pores and films, gas diffusion, combined transfer of liquid and vapor, convective diffusion in solutions, structure formation, capillary phenomena, and wetting. This unique book provides a wealth of information from the former Soviet Union, which will be of great interest to chemists, physicists and materials scientists, as well as industrialists working with a variety of different products in which disperse systems and porous bodies are important.

Download or read book Membrane Reactors for Hydrogen Production Processes written by Marcello De Falco and published by Springer Science & Business Media. This book was released on 2011-03-25 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane Reactors for Hydrogen Production Processes deals with technological and economic aspects of hydrogen selective membranes application in hydrogen production chemical processes. Membrane Reactors for Hydrogen Production Processes starts with an overview of membrane integration in the chemical reaction environment, formulating the thermodynamics and kinetics of membrane reactors and assessing the performance of different process architectures. Then, the state of the art of hydrogen selective membranes, membrane manufacturing processes and the mathematical modeling of membrane reactors are discussed. A review of the most useful applications from an industrial point of view is given. These applications include: natural gas steam reforming, autothermal reforming, water gas shift reaction, decomposition of hydrogen sulphide, and alkanes dehydrogenation. The final part is dedicated to the description of a pilot plant where the novel configuration was implemented at a semi-industrial scale. Plant engineers, researchers and postgraduate students will find Membrane Reactors for Hydrogen Production Processes a comprehensive guide to the state of the art of membrane reactor technology.

Download or read book 11th International Symposium on Process Systems Engineering PSE2012 written by Iftekhar A Karimi and published by Elsevier. This book was released on 2012-09-09 with total page 1804 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the PSE community continues its focus on understanding, synthesizing, modeling, designing, simulating, analyzing, diagnosing, operating, controlling, managing, and optimizing a host of chemical and related industries using the systems approach, the boundaries of PSE research have expanded considerably over the years. While early PSE research was largely concerned with individual units and plants, the current research spans wide ranges of scales in size (molecules to processing units to plants to global multinational enterprises to global supply chain networks; biological cells to ecological webs) and time (instantaneous molecular interactions to months of plant operation to years of strategic planning). The changes and challenges brought about by increasing globalization and the the common global issues of energy, sustainability, and environment provide the motivation for the theme of PSE2012: Process Systems Engineering and Decision Support for the Flat World. Each theme includes an invited chapter based on the plenary presentation by an eminent academic or industrial researcher Reports on the state-of-the-art advances in the various fields of process systems engineering Addresses common global problems and the research being done to solve them

Download or read book Thermal Processing of Bio Materials written by Tadeusz Kudra and published by CRC Press. This book was released on 1998-09-16 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a result of developments in biotechnology, bioengineering, and related sciences, processing of bio-materials and bioproducts has become an area of strategic importance. Written in a textbook style, this book attempts to bring together both the theory and practice of thermal processing of bio-materials. After giving the basic information on material properties, the authors describe the principal techniques such as freezing, chilling, membrane concentration, evaporation, drying, and sterilization. New methods of drying based on the authors' research experiences are presented to a great extent. Much attention is paid to quality interactions, including degradation of thermo and xerolabile bio- products. Given the strong effect of temperature on micro-organisms, a separate chapter is dedicated to thermobacteriology.

Download or read book Advances in Hydrogen Production Storage and Distribution written by Adolfo Iulianelli and published by Elsevier. This book was released on 2014-07-16 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Hydrogen Production, Storage and Distribution reviews recent developments in this key component of the emerging "hydrogen economy," an energy infrastructure based on hydrogen. Since hydrogen can be produced without using fossil fuels, a move to such an economy has the potential to reduce greenhouse gas emissions and improve energy security. However, such a move also requires the advanced production, storage and usage techniques discussed in this book. Part one introduces the fundamentals of hydrogen production, storage, and distribution, including an overview of the development of the necessary infrastructure, an analysis of the potential environmental benefits, and a review of some important hydrogen production technologies in conventional, bio-based, and nuclear power plants. Part two focuses on hydrogen production from renewable resources, and includes chapters outlining the production of hydrogen through water electrolysis, photocatalysis, and bioengineered algae. Finally, part three covers hydrogen production using inorganic membrane reactors, the storage of hydrogen, fuel cell technology, and the potential of hydrogen as a fuel for transportation. Advances in Hydrogen Production, Storage and Distribution provides a detailed overview of the components and challenges of a hydrogen economy. This book is an invaluable resource for research and development professionals in the energy industry, as well as academics with an interest in this important subject. - Reviews developments and research in this dynamic area - Discusses the challenges of creating an infrastructure to store and distribute hydrogen - Reviews the production of hydrogen using electrolysis and photo-catalytic methods