Download or read book Modelling of Water Cooled Fuel Including Design Basis and Severe Accidents written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Nuclear fuel performance and management play an essential role in ensuring safety, competitiveness and public acceptance of nuclear power. Reliability of fuel depends on its proper design, manufacturing, and ability to withstand required normal operational conditions, as well as possible accidents. In-reactor loads on the core materials are extremely high, which defines a need for detailed R & D as a basis for prediction of in-pile fuel behaviour. The Fukushima Daiichi accident has demonstrated the need for adequate analysis of all aspects of fuel performance to prevent a failure, and also to mitigate consequences if an accident occurs. In order to satisfy these demands, new national and international programmes have been launched and advanced modelling codes have been developed. The experience and lessons learned during three sessions of an IAEA technical meeting on modelling of water cooled fuel, including design basis and severe accidents are presented in this publication."--Publisher's description.
Download or read book Comprehensive Nuclear Materials written by and published by Elsevier. This book was released on 2020-07-22 with total page 4871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field
Download or read book Handbook on Thermal Hydraulics in Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Elsevier. This book was released on 2024-07-29 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook on Thermal Hydraulics of Water-Cooled Nuclear Reactors, Volume 2, Modelling includes all new chapters which delve deeper into the topic, adding context and practical examples to help readers apply learnings to their own setting. Topics covered include experimental thermal-hydraulics and instrumentation, numerics, scaling and containment in thermal-hydraulics, as well as a title dedicated to good practices in verification and validation. This book will be a valuable reference for graduate and undergraduate students of nuclear or thermal engineering, as well as researchers in nuclear thermal-hydraulics and reactor technology, engineers working in simulation and modeling of nuclear reactors, and more. In addition, nuclear operators, code developers and safety engineers will also benefit from the practical guidance provided. Presents a comprehensive analysis on the connection between nuclear power and thermal hydraulics Includes end-of-chapter questions, quizzes and exercises to confirm understanding and provides solutions in an appendix Covers applicable nuclear reactor safety considerations and design technology throughout
Download or read book Assessment of Size Aspects in Modelling Molten Fuel Coolant Interaction written by and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: ABSTRACT Severe accidents in light water nuclear reactors occur when reactor vessel water inventory decreases and there is no available additional water coolant to be delivered into the core. In general, during an extended severe accident sequence a period exists in which the reactor core, after a partial or total melt down, is poured into the lower plenum that can have some water present. The study of the interaction of the melt fuel with the water is the objective of MFCI (Melt Fuel Coolant Interaction) activities. MFCI is one of the most important issues awaiting resolution in water cooled reactor safety analysis. The progression of a severe accident in a water cooled reactor can lead to energetic (steam explosion) or non-energetic (melt quenching) interactions as the molten fuel relocates and eventually interacts with the coolant either in the vessel lower head (in vessel) or in the cavity (ex-vessel). The MFCI experiments at JRC Ispra site were conducted in the FARO (Furnace And Release Oven) test facility under realistic melt composition and prototypical accident conditions to provide basic information on underlying phenomena. The experimental programme was complemented by comprehensive pre-test and post-test analytical activities based on the development and application of the thermalhydraulic COMETA (COre MElt Thermalhydraulic Analysis) code. The code is developed and assessed on the basis of experimental information acquired in the FARO facility tests, and there are some limitations and uncertainties in their application to the full plant, which need to be identified and possibly quantified. In general the main objective of the PhD research was achieved expanding the general knowledge in Melt Fuel Coolant Interaction. The knowledge was complemented collaborating and complementing the application of COMETA code under conditions not experimented before, developing and improving COMETA code sources and verifying the code consistency, analysing and unifying the.
Download or read book Thermal Hydraulics of Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Woodhead Publishing. This book was released on 2017-05-18 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Hydraulics of Water-Cooled Nuclear Reactors reviews flow and heat transfer phenomena in nuclear systems and examines the critical contribution of this analysis to nuclear technology development. With a strong focus on system thermal hydraulics (SYS TH), the book provides a detailed, yet approachable, presentation of current approaches to reactor thermal hydraulic analysis, also considering the importance of this discipline for the design and operation of safe and efficient water-cooled and moderated reactors. Part One presents the background to nuclear thermal hydraulics, starting with a historical perspective, defining key terms, and considering thermal hydraulics requirements in nuclear technology. Part Two addresses the principles of thermodynamics and relevant target phenomena in nuclear systems. Next, the book focuses on nuclear thermal hydraulics modeling, covering the key areas of heat transfer and pressure drops, then moving on to an introduction to SYS TH and computational fluid dynamics codes. The final part of the book reviews the application of thermal hydraulics in nuclear technology, with chapters on V&V and uncertainty in SYS TH codes, the BEPU approach, and applications to new reactor design, plant lifetime extension, and accident analysis. This book is a valuable resource for academics, graduate students, and professionals studying the thermal hydraulic analysis of nuclear power plants and using SYS TH to demonstrate their safety and acceptability. Contains a systematic and comprehensive review of current approaches to the thermal-hydraulic analysis of water-cooled and moderated nuclear reactors Clearly presents the relationship between system level (top-down analysis) and component level phenomenology (bottom-up analysis) Provides a strong focus on nuclear system thermal hydraulic (SYS TH) codes Presents detailed coverage of the applications of thermal-hydraulics to demonstrate the safety and acceptability of nuclear power plants
Download or read book Design basis Accident Analysis Methods For Light water Nuclear Power Plants written by Robert Martin and published by World Scientific. This book was released on 2019-02-13 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book captures the principles of safety evaluation as practiced in the regulated light-water reactor nuclear industry, as established and stabilized over the last 30 years. It is expected to serve both the current industry and those planning for the future. The work's coverage of the subject matter is the broadest to date, including not only the common topics of modeling and simulation, but also methods supporting the basis for the underlying assumptions, the extension to radiological safety, what to expect in a licensing review, historical perspectives and the implication for new designs.This text is an essential resource for practitioners and students, on the current best-practices in nuclear power plant safety and their basis. Contributors of this work are subject matter experts in their specialties, much of which was nurtured and inspired by Prof. Larry Hochreiter, a prominent nuclear safety pioneer.Related Link(s)
Download or read book Modelling of Fuel Behaviour in Design Basis Accidents and Design Extension Conditions written by International Atomic Energy Agency and published by . This book was released on 2020-07-30 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is the result of an IAEA technical meeting and reports on Member States' capabilities in modelling, predicting and improving their understanding of the behaviour of nuclear fuel under accident conditions. The main results and outcomes of a coordinated research project (CRP) on this topic are also presented.
Download or read book Severe Accident Scoping Simulations of Accident Tolerant Fuel Concepts for BWRs written by and published by . This book was released on 2015 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accident-tolerant fuels (ATFs) are fuels and/or cladding that, in comparison with the standard uranium dioxide Zircaloy system, can tolerate loss of active cooling in the core for a considerably longer time period while maintaining or improving the fuel performance during normal operations [1]. It is important to note that the currently used uranium dioxide Zircaloy fuel system tolerates design basis accidents (and anticipated operational occurrences and normal operation) as prescribed by the US Nuclear Regulatory Commission. Previously, preliminary simulations of the plant response have been performed under a range of accident scenarios using various ATF cladding concepts and fully ceramic microencapsulated fuel. Design basis loss of coolant accidents (LOCAs) and station blackout (SBO) severe accidents were analyzed at Oak Ridge National Laboratory (ORNL) for boiling water reactors (BWRs) [2]. Researchers have investigated the effects of thermal conductivity on design basis accidents [3], investigated silicon carbide (SiC) cladding [4], as well as the effects of ATF concepts on the late stage accident progression [5]. These preliminary analyses were performed to provide initial insight into the possible improvements that ATF concepts could provide and to identify issues with respect to modeling ATF concepts. More recently, preliminary analyses for a range of ATF concepts have been evaluated internationally for LOCA and severe accident scenarios for the Chinese CPR1000 [6] and the South Korean OPR-1000 [7] pressurized water reactors (PWRs). In addition to these scoping studies, a common methodology and set of performance metrics were developed to compare and support prioritizing ATF concepts [8]. A proposed ATF concept is based on iron-chromium-aluminum alloys (FeCrAl) [9]. With respect to enhancing accident tolerance, FeCrAl alloys have substantially slower oxidation kinetics compared to the zirconium alloys typically employed. During a severe accident, FeCrAl would tend to generate heat and hydrogen from oxidation at a slower rate compared to the zirconium-based alloys in use today. The previous study, [2], of the FeCrAl ATF concept during station blackout (SBO) severe accident scenarios in BWRs was based on simulating short term SBO (STSBO), long term SBO (LTSBO), and modified SBO scenarios occurring in a BWR-4 reactor with MARK-I containment. The analysis indicated that FeCrAl had the potential to delay the onset of fuel failure by a few hours depending on the scenario, and it could delay lower head failure by several hours. The analysis demonstrated reduced in-vessel hydrogen production. However, the work was preliminary and was based on limited knowledge of material properties for FeCrAl. Limitations of the MELCOR code were identified for direct use in modeling ATF concepts. This effort used an older version of MELCOR (1.8.5). Since these analyses, the BWR model has been updated for use in MELCOR 1.8.6 [10], and more representative material properties for FeCrAl have been modeled. Sections 2 4 present updated analyses for the FeCrAl ATF concept response during severe accidents in a BWR. The purpose of the study is to estimate the potential gains afforded by the FeCrAl ATF concept during BWR SBO scenarios.
Download or read book Super Light Water Reactors and Super Fast Reactors written by Yoshiaki Oka and published by Springer Science & Business Media. This book was released on 2010-07-01 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Super Light Water Reactors and Super Fast Reactors provides an overview of the design and analysis of nuclear power reactors. Readers will gain the understanding of the conceptual design elements and specific analysis methods of supercritical-pressure light water cooled reactors. Nuclear fuel, reactor core, plant control, plant stand-up and stability are among the topics discussed, in addition to safety system and safety analysis parameters. Providing the fundamentals of reactor design criteria and analysis, this volume is a useful reference to engineers, industry professionals, and graduate students involved with nuclear engineering and energy technology.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Thermal Hydraulic and Two Phase Flow written by Jun Wang and published by Frontiers Media SA. This book was released on 2018-10-11 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear energy is one of the most important clear energy and contributes more than 10% electric power to human society in the past decades of years. The nuclear thermal hydraulic and two-phase flow is one of the basic branches of nuclear technology and provides structure design and safety analysis to the nuclear power reactors. In the new century, the basic theoretical research of thermal hydraulic and two-phase flow, and innovative design for the next generation nuclear power plants (especially for the small modular reactor and molten salt reactor), along with other nuclear branches, constantly support the development of nuclear technology.
Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1977 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Safety written by and published by . This book was released on 1969 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reactor Safety written by and published by . This book was released on 1971 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975-08 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration. Technical Information Center and published by . This book was released on 1977 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Code of Federal Regulations written by and published by . This book was released on with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt:
