Download or read book Modelling of Soil Behaviour with Hypoplasticity written by David Mašín and published by Springer. This book was released on 2018-12-12 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the hypoplastic modelling framework. It is divided into two parts, the first of which is devoted to principles of hypoplasticity. First, the basic features of soil’s mechanical behaviour are introduced, namely non-linearity and asymptotic properties. These features are then incorporated into simple one-dimensional hypoplastic equations for compression and shear. Subsequently, a hypoplastic equivalent of the Modified Cam-Clay model is developed in 2D space using stress and strain invariants to demonstrate key similarities and differences between elasto-plastic and hypoplastic formulations. Lastly, the mathematical structure of hypoplastic models is explained by tracing their historical development, from the early trial-and-error models to more recent approaches. In turn, Part II introduces specific hypoplastic models for soils. First, two reference models for sand and clay are defined. After summarising their mathematical formulations, calibration procedures are described and discussed. Subsequently, more advanced modelling approaches are covered: the intergranular strain concept incorporating the effects of small strain stiffness and cyclic loading, viscohypoplasticity for predicting rate effects, soil structure to represent structured and bonded materials and soil anisotropy. The book concludes with a description of partial saturation and thermal effects: topics that are increasingly important to the disciplines of energy and environmental geotechnics. Selecting a constitutive model and its parameters is often the most important and yet challenging part of any numerical analysis in geotechnical engineering. Hypoplasticity involves a specific class of soil constitutive models, which are described in detail here. The book offers an essential resource, both for model users who need a more advanced model for their geotechnical calculations and are mainly interested in parameter calibration procedures, and for model developers who are seeking a comprehensive understanding of the mathematical structure of hypoplasticity.

Download or read book Introduction to Hypoplasticity written by D. Kolymbas and published by CRC Press. This book was released on 2000-01-01 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to give the reader a short, tractable and as far as possible complete introduction to the young theory of hypoplasticity, which is a new approach to constitutive modelling of granular media in terms of rational continuum mechanics.

Download or read book Soil Constitutive Models written by Jerry A. Yamamuro and published by Amer Society of Civil Engineers. This book was released on 2005-01 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 128 contains papers by 19 prominent constitutive modelers presented at the Geo-Frontier Conference, held in Austin, Texas, January 24-26, 2005.

Download or read book Analysis and Prediction of Soil Behaviour written by T. S. Nagaraj and published by Taylor & Francis. This book was released on 1994 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Brings Out The Possibilities Of Generalizations Of Behaviour Of Soils And Hence Of Predicting The Required Engineering Properties Without Elaborate Testing. We Recognize That A Single Approach Cannot Be Evolved For All Soil Types And Hence The Necessity For Classifying Soils Into Different Categories And To Use Appropriate Model For Each. First Of All, Based On Mechanism Of Stress Transfer And Interaction Between The Phases, Two Obvious Classes, The Fine Grained And Coarse-Grained Soils Have Been Differentiated.The Discussions Bring Out That Because Of Identical Mode Of Stress Transfer, The Mechanical Behaviour I.E., Compressibility, Shear Strength Relations, Permeability Variations Etc. Can Be Generalized For All Fine Grained Soils, Enabling The Prediction Of Behaviour Of Such Soils With Just The Knowledge Of Certain State And Index Properties. The Sequence Of Discussion Is On The Characterization Of Specific Soil States And Prediction Of Proportion Starting From The Ideal Saturated Uncemented Soils, Both Normally And Over Consolidated, Cemented Saturated Soils And Partly Saturated Soils.In Dealing With The Behaviour Of Coarse Grained Soils, The Importance Of Microfabric And The Difficulties In Possible Generalizations Are Discussed. Perhaps The Unique Feature Of This Book Is That The Division Of The Chapters Is Based On Different Soil States, All The Mechanical Behaviours Being Discussed Under Each Soil State.The Book Will Be Of Interest To Both Academicians And Practising Engineers, Researchers And Postgraduate Students. It Would Serve As A Textbook For Undergraduate Students With Prior Knowledge Of Basic Soil Mechanics.

Download or read book Unsaturated Soils Advances in Geo Engineering written by D.G. Toll and published by CRC Press. This book was released on 2008-06-23 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unsaturated Soils: Advances in Geo-Engineering comprises 136 contributions from leading international researchers and practitioners, presented at the First European Conference on Unsaturated Soils (Durham, UK, 2-4 July 2008). The papers report on the latest advances in geo-engineering aspects of unsaturated soils. It is the first collection to focu

Download or read book Dynamics and Control of Advanced Structures and Machines written by Hans Irschik and published by Springer Nature. This book was released on 2021-09-20 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected contributions to the 4th International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines. The workshop, which was held in Linz, Austria in September 2019, continued a series of international workshops — the Japan-Austria Joint Workshop on Mechanics and Model Based Control of Smart Materials and Structures, the Russia-Austria Joint Workshop on Advanced Dynamics and Model Based Control of Structures and Machines, and the first three editions of the International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines. The chapters cover a broad spectrum of topics in the field of Advanced Structures and Machines both with respect to theoretical aspects as well as applications to contemporary engineering problems.

Download or read book Proceedings of GeoShanghai 2018 International Conference Fundamentals of Soil Behaviours written by Annan Zhou and published by Springer. This book was released on 2018-05-10 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second volume of the proceedings of the 4th GeoShanghai International Conference that was held on May 27 - 30, 2018. The book, entitled “Fundamentals of Soil Behaviours”, presents the recent advances and technology in the understanding and modelling of fundamentals of soil’s behaviours. The subject of this book covers a wide range of topics related to soil behaviours in geotechnical engineering, geoenvironmental engineering and transportation engineering. The state-of-the-art theories, methodologies and findings in the related topics are included. This book may benefit researchers and scientists from the academic fields of soil and rock mechanics, geotechnical engineering, geoenvironmental engineering, transportation engineering, geology, mining and energy, as well as practical engineers from industry. Each of the papers included in this book received at least two positive peer reviews. The editors would like to express their sincerest appreciation to all of the anonymous reviewers all over the world, for their diligent work.

Download or read book Soil Behaviour and Critical State Soil Mechanics written by David Muir Wood and published by Cambridge University Press. This book was released on 1991-04-26 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soils can rarely be described as ideally elastic or perfectly plastic and yet simple elastic and plastic models form the basis for the most traditional geotechnical engineering calculations. With the advent of cheap powerful computers the possibility of performing analyses based on more realistic models has become widely available. One of the aims of this book is to describe the basic ingredients of a family of simple elastic-plastic models of soil behaviour and to demonstrate how such models can be used in numerical analyses. Such numerical analyses are often regarded as mysterious black boxes but a proper appreciation of their worth requires an understanding of the numerical models on which they are based. Though the models on which this book concentrates are simple, understanding of these will indicate the ways in which more sophisticated models will perform.

Download or read book Constitutive Modelling of Granular Materials written by Dimitrios Kolymbas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: In view of its extreme complexity the mathematical description of the mechanical behaviour of granular materials is an extremely difficult task. Today many different models compete with each other. However, the complexity of the models hinders their comparison, and the potential users are confused and, often, disencouraged. This book is expected to serve as a milestone in the present situation, to evaluate the present methodes, to clear up the situation, to focus and encourage for further research activities.

Download or read book Behaviour of Granular Materials written by Bernard Cambou and published by Springer. This book was released on 2014-05-04 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a complete and comprehensive analysis of the behaviour of granular materials including the description of experimental results, the different ways to define the global behaviour from local phenomena at the particle scale, the various modellings which can be used for a D.E.M. analysis to solve practical problems and finally the analysis of strain localisation. The concepts developed in this book are applicable to many kinds of granular materials considered in civil, mechanical or chemical engineering.

Download or read book New Developments in Materials for Infrastructure Sustainability and the Contemporary Issues in Geo environmental Engineering written by Shanzhi Shu and published by Springer. This book was released on 2018-07-11 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains research papers focusing on recent advances throughout the world in theories and technologies of geotechnical engineering and the relevant disciplines. Topics includes: numerical modeling, earthquake engineering, geomaterial application in soil improvement and geo-environmental engineering, foundation engineering, and geo-environmental engineering.. Papers were selected from the 5th GeoChina International Conference 2018 – Civil Infrastructures Confronting Severe Weathers and Climate Changes: From Failure to Sustainability, held on July 23 to 25, 2018 in HangZhou, China.

Download or read book Constitutive Modeling of Geomaterials written by Qiang Yang and published by Springer Science & Business Media. This book was released on 2012-08-22 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second International Symposium on Constitutive Modeling of Geomaterials: Advances and New Applications (IS-Model 2012), is to be held in Beijing, China, during October 15-16, 2012. The symposium is organized by Tsinghua University, the International Association for Computer Methods and Advances in Geomechanics (IACMAG), the Committee of Numerical and Physical Modeling of Rock Mass, Chinese Society for Rock Mechanics and Engineering, and the Committee of Constitutive Relations and Strength Theory, China Institution of Soil Mechanics and Geotechnical Engineering, China Civil Engineering Society. This Symposium follows the first successful International Workshop on Constitutive Modeling held in Hong Kong, which was organized by Prof. JH Yin in 2007. Constitutive modeling of geomaterials has been an active research area for a long period of time. Different approaches have been used in the development of various constitutive models. A number of models have been implemented in the numerical analyses of geotechnical structures. The objective of the symposium is to provide a forum for researchers and engineers working or interested in the area of constitutive modeling to meet together and share new ideas, achievements and experiences through presentations and discussions. Emphasis is placed on recent advances of constitutive modeling and its applications in both theoretic and experimental aspects. Six famous scholars have been invited for the plenary speeches of the symposiums. Some prominent scholars have been invited to organize four specialized workshops on hot topics, including “Time-dependent stress-strain behavior of geomaterials”, “Constitutive modeling within critical state soil mechanics”, “Multiscale and multiphysics in geomaterials”, and “Damage to failure in rock structures”. A total of 49 papers are included in the above topics. In addition, 51 papers are grouped under three topics covering “Behaviour of geomaterials”, “Constitutive model”, and “Applications”. The editors expect that the book can be helpful as a reference to all those in the field of constitutive modeling of geomaterials.

Download or read book Numerical Methods in Geotechnical Engineering IX written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-19 with total page 2563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering.

Download or read book Advances in Spatio Temporal Analysis written by Xinming Tang and published by CRC Press. This book was released on 2007-08-23 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Geographic Information Technology have raised the expectations of users. A static map is no longer enough; there is now demand for a dynamic representation. Time is of great importance when operating on real world geographical phenomena, especially when these are dynamic. Researchers in the field of Temporal Geographical Information Systems (TGIS) have been developing methods of incorporating time into geographical information systems. Spatio-temporal analysis embodies spatial modelling, spatio-temporal modelling and spatial reasoning and data mining. Advances in Spatio-Temporal Analysis contributes to the field of spatio-temporal analysis, presenting innovative ideas and examples that reflect current progress and achievements.

Download or read book Numerical Models in Geomechanics written by G.N. Pande and published by CRC Press. This book was released on 2020-12-18 with total page 1528 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume a number of developments on a variety of topics have been reported. These topics include: partially saturated soil; instabilities in soil behaviour; environmental geomechanics; parallel computing; and applications to tunnels, embankments, slopes, foundations and anchors.

Download or read book Numerical Methods in Geotechnical Engineering written by Thomas Benz and published by CRC Press. This book was released on 2010-05-25 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering contains 153 scientific papers presented at the 7th European Conference on Numerical Methods in Geotechnical Engineering, NUMGE 2010, held at Norwegian University of Science and Technology (NTNU) in Trondheim, Norway, 2 4 June 2010.The contributions cover topics from emerging research to engineering pra

Download or read book Numerical Methods in Geotechnical Engineering IX Volume 2 written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-27 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering. This is volume 2 of the NUMGE 2018 set.