Download or read book Modelling of Gas fired Furnaces and Boilers and Other Industrial Heating Processes written by Jeffrey Michael Rhine and published by McGraw-Hill Companies. This book was released on 1991 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides information on the physical and mathematical techniques used in the thermal design and development of gas-fired heating plants found in manufacturing and process industries and in commerce. The techniques described include boilers and glass ceramics.
Download or read book Computational Fluid Dynamics in Industrial Combustion written by Charles E. Baukal, Jr. and published by CRC Press. This book was released on 2000-10-26 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although many books have been written on computational fluid dynamics (CFD) and many written on combustion, most contain very limited coverage of the combination of CFD and industrial combustion. Furthermore, most of these books are written at an advanced academic level, emphasize theory over practice, and provide little help to engineers who need to use CFD for combustion modeling. Computational Fluid Dynamics in Industrial Combustion fills this gap in the literature. Focusing on topics of interest to the practicing engineer, it codifies the many relevant books, papers, and reports written on this combined subject into a single, coherent reference. It looks at each topic from a somewhat narrow perspective to see how that topic affects modeling in industrial combustion. The editor and his team of expert authors address these topics within three main sections: Modeling Techniques-The basics of CFD modeling in combustion Industrial Applications-Specific applications of CFD in the steel, aluminum, glass, gas turbine, and petrochemical industries Advanced Techniques-Subjects rarely addressed in other texts, including design optimization, simulation, and visualization Rapid increases in computing power and significant advances in commercial CFD codes have led to a tremendous increase in the application of CFD to industrial combustion. Thorough and clearly representing the techniques and issues confronted in industry, Computational Fluid Dynamics in Industrial Combustion will help bring you quickly up to date on current methods and gain the ability to set up and solve the various types of problems you will encounter.
Download or read book Industrial Combustion Pollution and Control written by Jr., Charles E. Baukal and published by CRC Press. This book was released on 2003-10-15 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference overflows with an abundance of experimental techniques, simulation strategies, and practical applications useful in the control of pollutants generated by combustion processes in the metals, minerals, chemical, petrochemical, waste, incineration, paper, glass, and foods industries. The book assists engineers as they attempt to meet e
Download or read book Heat Transfer in Industrial Combustion written by Jr., Charles E. Baukal and published by CRC Press. This book was released on 2000-05-26 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industry relies heavily on the combustion process. The already high demand for energy, primarily from combustion, is expected to continue to rapidly increase. Yet, the information is scattered and incomplete, with very little attention paid to the overall combustion system. Designed for practicing engineers, Heat Transfer in Industrial Combustion e
Download or read book Industrial and Process Furnaces written by Barrie Jenkins and published by Butterworth-Heinemann. This book was released on 2013-10-23 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Furnaces sit at the core of all branches of manufacture and industry, so it is vital that these are designed and operated safely and effi-ciently. This reference provides all of the furnace theory needed to ensure that this can be executed successfully on an industrial scale. Industrial and Process Furnaces: Principles, 2nd Edition provides comprehensive coverage of all aspects of furnace operation and design, including topics essential for process engineers and operators to better understand furnaces. This includes: the combustion process and its control, furnace fuels, efficiency, burner design and selection, aerodynamics, heat release profiles, furnace atmosphere, safety and emissions. These elements and more are brought together to illustrate how to achieve optimum design and operation, with real-world case studies to showcase their application. Up-to-date and comprehensive reference encompassing not only best practice of operation but the essential elements of furnace theory and design, essential to anyone working with furnaces, ovens and combustion-based systems. More case studies, more worked examples. New material in this second edition includes further application of Computational Fluid Dynamics (CFD), with additional content on flames and burners, costs, efficiencies and future trends.
Download or read book Encyclopedia of Dairy Sciences written by and published by Academic Press. This book was released on 2011-03-25 with total page 4072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dairy Science, Four Volume Set includes the study of milk and milk-derived food products, examining the biological, chemical, physical, and microbiological aspects of milk itself as well as the technological (processing) aspects of the transformation of milk into its various consumer products, including beverages, fermented products, concentrated and dried products, butter and ice cream. This new edition includes information on the possible impact of genetic modification of dairy animals, safety concerns of raw milk and raw milk products, peptides in milk, dairy-based allergies, packaging and shelf-life and other topics of importance and interest to those in dairy research and industry. Fully reviewed, revised and updated with the latest developments in Dairy Science Full color inserts in each volume illustrate key concepts Extended index for easily locating information
Download or read book Advances in Heat Transfer written by Ephraim M. Sparrow and published by Academic Press. This book was released on 2014-11-26 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer fills the information gap between regularly scheduled journals and university-level textbooks by providing in-depth review articles over a broader scope than in journals or texts. The articles, which serve as a broad review for experts in the field, will also be of great interest to non-specialists who need to keep up-to-date with the results of the latest research. This serial is essential reading for all mechanical, chemical and industrial engineers working in the field of heat transfer, graduate schools or industry. Never before have so many authorities provided both retrospective and current overviews.
Download or read book Theory and Calculation of Heat Transfer in Furnaces written by Yanguo Zhang and published by Elsevier. This book was released on 2016-04-13 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Calculation of Heat Transfer in Furnaces covers the heat transfer process in furnaces, how it is related to energy exchange, the characteristics of efficiency, and the cleaning of combustion, providing readers with a comprehensive understanding of the simultaneous physical and chemical processes that occur in boiler combustion, flow, heat transfer, and mass transfer. Covers all the typical boilers with most fuels, as well as the effects of ash deposition and slagging on heat transfer Combines mature and advanced technologies that are easy to understand and apply Describes basic theory with real design that is based on meaningful experimental data
Download or read book Combustion Engineering written by Kenneth Bryden and published by CRC Press. This book was released on 2022-05-26 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Engineering, Third Edition introduces the analysis, design, and building of combustion energy systems. It discusses current global energy, climate, and air pollution challenges and considers the increasing importance of renewable energy sources, such as biomass fuels. Mathematical methods are presented, along with qualitative descriptions of their use, which are supported by numerous tables with practical data and formulae, worked examples, chapter-end problems, and updated references. The new edition features new and updated sections on solid biofuels, spark-ignition, compression-ignition, soot and black carbon formation, and current energy policies. Features include: Builds a strong foundation for design and engineering of combustion systems. Provides fully updated coverage of alternative and renewable fuel topics throughout the text. Features new and updated sections on solid biofuels, spark-ignition, compression-ignition, soot and black carbon formation, and current energy policies. Includes updated data and formulae, worked examples, and additional chapter-end problems. Includes a Solutions Manual and figures slides for adopting instructors. This text is intended for undergraduate and first-year graduate mechanical engineering students taking introductory courses in combustion. Practicing heating engineers, utility engineers, and engineers consulting in energy and environmental areas will find this book a useful reference.
Download or read book Energy Efficiency in Process Technology written by P.A. Pilavachi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1975 the Commission has been stimulating R & D work aimed at energy saving. The conference objective was to provide an international forum for the presentation and discussion of recent R & D relevant to energy efficiency, taking into account environmental aspects, in the energy intensive process industries.
Download or read book Combustion Engineering written by Kenneth W. Ragland and published by CRC Press. This book was released on 2011-05-06 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Engineering, Second Edition maintains the same goal as the original: to present the fundamentals of combustion science with application to today's energy challenges. Using combustion applications to reinforce the fundamentals of combustion science, this text provides a uniquely accessible introduction to combustion for undergraduate stud
Download or read book Combustion Engineering Second Edition written by Kenneth W. Ragland and published by CRC Press. This book was released on 2011-06-15 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Engineering, Second Edition maintains the same goal as the original: to present the fundamentals of combustion science with application to today’s energy challenges. Using combustion applications to reinforce the fundamentals of combustion science, this text provides a uniquely accessible introduction to combustion for undergraduate students, first-year graduate students, and professionals in the workplace. Combustion is a critical issue impacting energy utilization, sustainability, and climate change. The challenge is to design safe and efficient combustion systems for many types of fuels in a way that protects the environment and enables sustainable lifestyles. Emphasizing the use of combustion fundamentals in the engineering and design of combustion systems, this text provides detailed coverage of gaseous, liquid and solid fuel combustion, including focused coverage of biomass combustion, which will be invaluable to new entrants to the field. Eight chapters address the fundamentals of combustion, including fuels, thermodynamics, chemical kinetics, flames, detonations, sprays, and solid fuel combustion mechanisms. Eight additional chapters apply these fundamentals to furnaces, spark ignition and diesel engines, gas turbines, and suspension burning, fixed bed combustion, and fluidized bed combustion of solid fuels. Presenting a renewed emphasis on fundamentals and updated applications to illustrate the latest trends relevant to combustion engineering, the authors provide a number of pedagogic features, including: Numerous tables with practical data and formulae that link combustion fundamentals to engineering practice Concise presentation of mathematical methods with qualitative descriptions of their use Coverage of alternative and renewable fuel topics throughout the text Extensive example problems, chapter-end problems, and references These features and the overall fundamentals-to-practice nature of this book make it an ideal resource for undergraduate, first level graduate, or professional training classes. Students and practitioners will find that it is an excellent introduction to meeting the crucial challenge of engineering sustainable combustion systems in a cost-effective manner. A solutions manual and additional teaching resources are available with qualifying course adoption.
Download or read book Information Sources in Engineering written by Ken W. Mildren and published by . This book was released on 1996 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide presents an updated evaluation of sources - from reports & journals to bibliographies & reviews - for engineering information. Topics covered include energy technology, nuclear power engineering, fluid mechanics & fluid power systems, design & ergonomics, biomedical engineering, & more.
Download or read book Reactor Processes in Synthetic Organic Chemical Manufacturing Industry Background Information for Proposed Standards written by and published by . This book was released on 1990 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Clean Combustion Technologies written by Maria da Graca Carvalho and published by CRC Press. This book was released on 1999-05-11 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seventy-five refereed papers in this volume represent the second in a series of biannual benchmarks for technologies that maximize energy conversion while minimizing undesirable emissions. Covering the entire range of industrial and transport combustion as well as strategies for energy R&D, these state-of-the-art contributions will be indispensable to mechanical and chemical engineers in academia and industry, and technical personnel in military, energy, and environmental agencies of government.
Download or read book Hazardous Air Pollutant Emissions from Process Units in the Synthetic Organic Chemical Manufacturing Industry written by and published by . This book was released on 1993 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
