Download or read book Physical Properties and Behaviour of High Performance Concrete at High Temperature written by Pierre Pimienta and published by Springer. This book was released on 2018-09-11 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work done by the RILEM Technical Committee 227-HPB (Physical properties and behaviour of High-Performance Concrete at high temperature). It contains the latest research results on the behaviour of high-performance concretes at high temperature. The book presents the state of the art of experimental data on High-Performance concretes and it collects and synthesizes useful data about concrete behaviour at high temperatures. The book is divided into independent chapters dealing with degradation reactions in concrete exposed to high temperatures; mass transport properties; thermal properties; and mechanical properties. The results presented especially target a group of users composed by universities and testing laboratories, building material companies and industries, material scientists and experts, building and infrastructure authorities, designers and civil engineers.

Download or read book Modelling of Concrete Behaviour at High Temperature written by Alain Millard and published by Springer. This book was released on 2019-03-20 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work done by the RILEM Technical Committee 227-HPB (Physical properties and behaviour of High-Performance Concrete at high temperature). It contains the latest research results on the modelling of concrete behaviour at high temperature. Some monographs on the subject have been published already but generally they do not cover the whole range of possibilities which are encountered in the literature as well as in practice. Moreover, there has been a rapidly increasing development of computational models during the last twenty years, which deserves attention. Therefore, it is the aim of this report to compile and present most of the tools that are proposed in the literature and are nowadays available for practice in some commercial computational packages. The book is divided in 3 main chapters dealing with: - engineering modelling - advanced modelling - constitutive parameters including hydral, thermal and mechanical parameters. The results presented especially target a group of users composed by universities and research laboratories, building material companies and industries, material scientists and experts, building and infrastructure authorities, designers and civil engineers.

Download or read book Modelling of Concrete Behaviour at High Temperature written by Alain Millard and published by . This book was released on 2019 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work done by the RILEM Technical Committee 227-HPB (Physical properties and behaviour of High-Performance Concrete at high temperature). It contains the latest research results on the modelling of concrete behaviour at high temperature. Some monographs on the subject have been published already but generally they do not cover the whole range of possibilities which are encountered in the literature as well as in practice. Moreover, there has been a rapidly increasing development of computational models during the last twenty years, which deserves attention. Therefore, it is the aim of this report to compile and present most of the tools that are proposed in the literature and are nowadays available for practice in some commercial computational packages. The book is divided in 3 main chapters dealing with: - engineering modelling - advanced modelling - constitutive parameters including hydral, thermal and mechanical parameters. The results presented especially target a group of users composed by universities and research laboratories, building material companies and industries, material scientists and experts, building and infrastructure authorities, designers and civil engineers.

Download or read book Concrete at High Temperatures written by Zdeněk P. Bažant and published by Prentice Hall. This book was released on 1996 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increased use of concrete in high temperature environments, it is essential for engineers to have a knowledge of the properties and mathematical modelling of concrete in such extreme conditions. Bringing together, for the first time, vast amounts of data previously scattered throughout numerous papers and periodicals, this book provides, in two parts, a comprehensive and systematic review of both the properties and the mathematical modelling of concrete at high temperatures. Part I provides a comprehensive description of the material properties of concrete at high temperatures. Assuming only a basic knowledge of mathematics, the information is presented at an elementary level suitable for graduates of civil engineering or materials science. Part II describes the response of concrete to high temperatures in precise terms based on mathematical modelling of physical processes. Suitable for advanced graduate students, researchers and specialists, it presents detailed mathematical models of phenomena such as heat transfer, moisture diffusion, creep, volume changes, cracking and fracture. Concrete at High Temperatures will prove a valuable reference source to university researchers and graduate students in civil engineering and materials science, engineers in research laboratories, and practising engineers concerned with fire resistance, concrete structures for nuclear reactors and chemical technology vessels.

Download or read book Code type models for concrete behaviour written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2013-11-01 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Model Code 2010 represents the state-of-the-art of code-type models for structural behaviour of concrete. It comprises constitutive relations and material models together with the most important explanatory notes. However the underlying normative work, i.e. the fundamental data as well as the considerations and discussions behind the formulas could not be given within the Model Code text. Based on various experiences gained after the publication of Model Code 1990 this lacking background information will lead in the following to numerous questions arising from Model Code users. Consequently the present bulletin claims to conquer this general weakness of codes in a way to guard against any future misunderstandings of the Model Code 2010 related to its chapter 5.1 (Concrete). It discusses the given formulas in connection with experimental data and the most important international literature. The constitutive relations or material models, being included in MC1990 and forming the basis and point of origin of the Task Group’s work, were critically evaluated, if necessary and possible adjusted, or replaced by completely new approaches. Major criteria have been the physical and thermodynamical soundness as well as practical considerations like simplicity and operationality. This state-of-the-art report is intended for practicizing engineers as well as for researchers and represents a comprehensible summary of the relevant knowledge available to the members of the fib Task Group 8.7 at the time of its drafting. Besides the fact that the bulletin is a background document for Chapter 5.1 of MC2010, it will provide an important foundation for the development of future generations of code-type models related to the characteristics and the behaviour of structural concrete. Further it will offer insights into the complexity of the normative work related to concrete modelling, leading to a better understanding and adequate appreciation of MC2010.

Download or read book Computational Modelling of Concrete Structures written by Nenad Bicanic and published by CRC Press. This book was released on 2014-03-04 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EURO-C conference series (Split 1984, Zell am See 1990, Innsbruck 1994, Badgastein 1998, St Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St Anton am Alberg 2014) brings together researchers and practising engineers concerned with theoretical, algorithmic and validation aspects associated with computational simulations of concrete and

Download or read book Reactions and Mechanisms in Thermal Analysis of Advanced Materials written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2015-07-29 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strong bonds form stronger materials. For this reason, the investigation on thermal degradation of materials is a significantly important area in research and development activities. The analysis of thermal stability can be used to assess the behavior of materials in the aggressive environmental conditions, which in turn provides valuable information about the service life span of the materiel. Unlike other books published so far that have focused on either the fundamentals of thermal analysis or the degradation pattern of the materials, this book is specifically on the mechanism of degradation of materials. The mechanism of rapturing of chemical bonds as a result of exposure to high-temperature environment is difficult to study and resulting mechanistic pathway hard to establish. Limited information is available on this subject in the published literatures and difficult to excavate. Chapters in this book are contributed by the experts working on thermal degradation and analysis of the wide variety of advanced and traditional materials. Each chapter discusses the material, its possible application, behavior of chemical entities when exposed to high-temperature environment and mode and the mechanistic route of its decomposition. Such information is crucial while selecting the chemical ingredients during the synthesis or development of new materials technology.

Download or read book Multi Scale Modeling of Structural Concrete written by Koichi Maekawa and published by CRC Press. This book was released on 2008-11-28 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increases in computer power have now enabled engineers to combine materials science with structural mechanics in the design and the assessment of concrete structures. The techniques developed have become especially useful for the performance assessment of such structures under coupled mechanistic and environmental actions. This allows effective management of infrastructure over a much longer life cycle, thus satisfying the requirements for durability and sustainability. This ground-breaking new book draws on the fields of materials and structural mechanics in an integrated way to address the questions of management and maintenance. It proposes a realistic way of simulating both constituent materials and structural responses under external loading and under ambient conditions. Where the research literature discusses component or element technology related to performance assessment, this book uniquely covers the subject at the level of the whole system including soil foundation, showing engineers how to model changes in concrete structures over time and how to use this for decision making in infrastructure maintenance and asset management.

Download or read book Fire Design of Concrete Structures Materials Structures and Modelling written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2007-01-01 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire design of concrete structures has emerged in recent years as a high profile subject of great interest to both experts and the public. This has been largely prompted by severe damage to concrete in a number of recent tunnel fires, as well as a considerable amount of research and development that has taken place world-wide. fib Task Group 4.3, "Fire Design of Concrete Structures", therefore took the initiative to develop this bulletin in order to present the results of this international research to a wider group of concrete professionals. The report presents a general brief outline of the effect of fire on both concrete material and concrete structures, with emphasis placed on the important developments of the past few years, namely: (a) the increasing use of high strength concrete (HSC) in buildings, tunnels and bridges; (b) the growing acceptance of the use of performance based fire engineering calculations for the structural analysis and design against fire; (c) the problem of, and solutions to, explosive spalling; and (d) fires in tunnels. This report is not intended to be an exhaustive review of the effect of fire on concrete and concrete structures, nor to present a database of properties at high temperature. Instead, the main aims of this document are to present recent trends and developments, highlight key influencing factors, bring together the disparate but related issues in one short document, highlight the deficiencies in current practice and point to the future. The basic principles of performance based codes and fire engineering are also presented on the assumption that the reader is not a specialist in this field.

Download or read book Creep and Hygrothermal Effects in Concrete Structures written by Zdeněk P. Bažant and published by Springer. This book was released on 2018-01-17 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive treatise covers in detail practical methods of analysis as well as advanced mathematical models for structures highly sensitive to creep and shrinkage. Effective computational algorithms for century-long creep effects in structures, moisture diffusion and high temperature effects are presented. The main design codes and recommendations (including RILEM B3 and B4) are critically compared. Statistical uncertainty of century-long predictions is analyzed and its reduction by extrapolation is discussed, with emphasis on updating based on short-time tests and on long-term measurements on existing structures. Testing methods and the statistics of large randomly collected databases are critically appraised and improvements of predictions of multi-decade relaxation of prestressing steel, cyclic creep in bridges, cracking damage, etc., are demonstrated. Important research directions, such as nanomechanical and probabilistic modeling, are identified, and the need for separating the long-lasting autogenous shrinkage of modern concretes from the creep and drying shrinkage data and introducing it into practical prediction models is emphasized. All the results are derived mathematically and justified as much as possible by extensive test data. The theoretical background in linear viscoelasticity with aging is covered in detail. The didactic style makes the book suitable as a textbook. Everything is properly explained, step by step, with a wealth of application examples as well as simple illustrations of the basic phenomena which could alternate as homeworks or exams. The book is of interest to practicing engineers, researchers, educators and graduate students.

Download or read book Computational Modelling of Concrete Structures written by Gunther Meschke and published by CRC Press. This book was released on 2006-03-16 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceedings brings together the work of researchers and practising engineers concerned with computational modelling of complex concrete, reinforced concrete and prestressed concrete structures in engineering practice. The subjects considered include computational mechanics of concrete and other cementitious materials, including masonry. Advanced discretisation methods and microstructural aspects within multi-field and multi-scale settings are discussed, as well as modelling formulations and constitutive modelling frameworks and novel experimental programmes. The conference also considered the need for reliable, high-quality analysis and design of concrete structures in regard to safety-critical structures, with a view to adopting these in codes of practice or recommendations. The book is of special interest to researchers in computational mechanics, and industry experts in complex nonlinear simulations of concrete structures.

Download or read book Transport Processes in Concrete written by Robert Cerny and published by CRC Press. This book was released on 2002-04-25 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport Processes in Concrete presents a comprehensive survey of the physical and chemical processes and transport mechanisms in concrete, and analyses their significance for the movement of heat, moisture and chemical compounds.A critical analysis of the available mathematical models is given, and from this analysis the most suitable models to d

Download or read book Computational Modelling of Concrete and Concrete Structures written by Günther Meschke and published by CRC Press. This book was released on 2022-05-22 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Modelling of Concrete and Concrete Structures contains the contributions to the EURO-C 2022 conference (Vienna, Austria, 23-26 May 2022). The papers review and discuss research advancements and assess the applicability and robustness of methods and models for the analysis and design of concrete, fibre-reinforced and prestressed concrete structures, as well as masonry structures. Recent developments include methods of machine learning, novel discretisation methods, probabilistic models, and consideration of a growing number of micro-structural aspects in multi-scale and multi-physics settings. In addition, trends towards the material scale with new fibres and 3D printable concretes, and life-cycle oriented models for ageing and durability of existing and new concrete infrastructure are clearly visible. Overall computational robustness of numerical predictions and mathematical rigour have further increased, accompanied by careful model validation based on respective experimental programmes. The book will serve as an important reference for both academics and professionals, stimulating new research directions in the field of computational modelling of concrete and its application to the analysis of concrete structures. EURO-C 2022 is the eighth edition of the EURO-C conference series after Innsbruck 1994, Bad Gastein 1998, St. Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St. Anton am Arlberg 2014, and Bad Hofgastein 2018. The overarching focus of the conferences is on computational methods and numerical models for the analysis of concrete and concrete structures.

Download or read book Fire Safety Engineering Design of Structures Second Edition written by John Purkiss and published by Elsevier. This book was released on 2007 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential resource on the design and performance of common structural materials when they are exposed to fire.

Download or read book Structural Design for Fire Safety written by Andrew H. Buchanan and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.

Download or read book Fire Safety Engineering Design of Structures written by John A. Purkiss and published by CRC Press. This book was released on 2013-12-05 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing structures to withstand the effects of fire is challenging, and requires a series of complex design decisions. This third edition of Fire Safety Engineering Design of Structures provides practising fire safety engineers with the tools to design structures to withstand fires. This text details standard industry design decisions, and offers

Download or read book Computational Methods for Fracture written by Timon Rabczuk and published by MDPI. This book was released on 2019-10-28 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of 17 scientific papers about the computational modeling of fracture. Some of the manuscripts propose new computational methods and/or how to improve existing cutting edge methods for fracture. These contributions can be classified into two categories: 1. Methods which treat the crack as strong discontinuity such as peridynamics, scaled boundary elements or specific versions of the smoothed finite element methods applied to fracture and 2. Continuous approaches to fracture based on, for instance, phase field models or continuum damage mechanics. On the other hand, the book also offers a wide range of applications where state-of-the-art techniques are employed to solve challenging engineering problems such as fractures in rock, glass, concrete. Also, larger systems such as fracture in subway stations due to fire, arch dams, or concrete decks are studied.