Download or read book Modelling of coagulation processes and removal of non metallic inclusions at written by Kaoma Mulenga Michou and published by Editions Publibook. This book was released on 2016-09-02 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present work is devoted to optimization based upon physical and mathematical modelling of calcium treatment processes for low-alloy steel grades in Ladle, using Steel Refining Unit (SRU). The widely applicable method of calcium injection into ladle on Steel Refining Unit by means of Flux-Cored Wire (FCW) or the method of silicocalcium blowing-in often requires significant flow rate of calcium containing alloys to ensure the necessary concentration of calcium and sulfur in the finished steel. Methods of mathematical modelling are widely applied for the purpose of improvement of calcium alloys injection modes into ladle. However, mainly heating processes in the ladle are taken into consideration in this connection; meanwhile hydrodynamic processes are accounted only partially. At the same time, interfacial reactions of the metal with steam bubbles play a significant role in the processes of interaction between calcium and supernatant liquid, whereby sulfur and oxygen that are dissolved in steel take part in the reactions described above. Nevertheless, only single quantitative estimates are known for kinetics of mass exchanging processes in the ladle. Finally, efficiency of calcium treatment depends on chemical composition of steel. Probability of low-melting calcium aluminates formation, which ensure improvement of pouring capacity, depends not only on the frequently used proportion of [Ca] to [Al], but also on conditions of steel oxidation and sulfur content in the steel. Therefore, optimization of injection modes for calcium containing alloys based on the thermodynamic and kinetic analysis of steel deoxidation and modification conditions, as well as on the mathematical modelling of mass exchanging processes, represents a crucial scientific and technical challenge of nowadays.
Download or read book Mathematical Modelling of Process of Removal of Non metallic Inclusions During Argon Purging of Liquid Steel in the Ladle written by M. T. Dao and published by . This book was released on 1989 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Computational Methods in Mechanical and Materials Engineering written by Ashwani Kumar and published by CRC Press. This book was released on 2021-11-23 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth knowledge to solve engineering, geometrical, mathematical, and scientific problems with the help of advanced computational methods with a focus on mechanical and materials engineering. Divided into three subsections covering design and fluids, thermal engineering and materials engineering, each chapter includes exhaustive literature review along with thorough analysis and future research scope. Major topics covered pertains to computational fluid dynamics, mechanical performance, design, and fabrication including wide range of applications in industries as automotive, aviation, electronics, nuclear and so forth. Covers computational methods in design and fluid dynamics with a focus on computational fluid dynamics Explains advanced material applications and manufacturing in labs using novel alloys and introduces properties in material Discusses fabrication of graphene reinforced magnesium metal matrix for orthopedic applications Illustrates simulation and optimization gear transmission, heat sink and heat exchangers application Provides unique problem-solution approach including solutions, methodology, experimental setup, and results validation This book is aimed at researchers, graduate students in mechanical engineering, computer fluid dynamics,fluid mechanics, computer modeling, machine parts, and mechatronics.
Download or read book 12th International Symposium on High Temperature Metallurgical Processing written by Zhiwei Peng and published by Springer Nature. This book was released on 2022-02-04 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection includes the analysis, development, and operation of high-temperature processes that involve the extraction and processing of material resources, production, and treatment of metals, alloys, and ceramic materials. Contributions describe innovative methods for achieving property enhancement, impurity segregation and removal, byproduct recovery, waste minimization, energy efficiency, and utilization of complex ores. Also included are various technical, economic, and environmental issues associated with commercial-scale high-temperature processing methods.
Download or read book Advances in Materials Processing written by Yafang Han and published by Springer. This book was released on 2018-04-17 with total page 1274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume gathers selected papers presented at the Chinese Materials Conference 2017 (CMC2017), held in Yinchuan City, Ningxia, China, on July 06-12, 2017. This book covers a wide range of material surface science, advanced preparation and processing technologies of materials, high purity materials, silicon purification technology, solidification science and technology, performance and structure safety of petroleum tubular goods and equipment materials, materials genomes, materials simulation, computation and design. The Chinese Materials Conference (CMC) is the most important serial conference of the Chinese Materials Research Society (C-MRS) and has been held each year since the early 1990s. The 2017 installment included 37 Symposia covering four fields: Advances in energy and environmental materials; High performance structural materials; Fundamental research on materials; and Advanced functional materials. More than 5500 participants attended the congress, and the organizers received more than 700 technical papers. Based on the recommendations of symposium organizers and after peer reviewing, 490 papers have been included in the present proceedings, which showcase the latest original research results in the field of materials, achieved by more than 300 research groups at various universities and research institutes.
Download or read book Nippon Steel Technical Report written by and published by . This book was released on 1995 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Processing Fundamentals 2018 written by Guillaume Lambotte and published by Springer. This book was released on 2018-01-09 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes contributions from the Materials Processing Fundamentals Symposium held at the TMS 2018 Annual Meeting & Exhibition in Phoenix, Arizona. Covering the physical and numerical modeling of materials processing, the volume covers a range of metals and minerals. Authors present models and results related the basics of processing such as extraction, joining, separation, and casting. The corresponding fundamentals of mass and heat transport as well as physical and thermodynamics properties are addressed, allowing for a cross-disciplinary vision of the field.
Download or read book Light Metals 2023 written by Stephan Broek and published by Springer Nature. This book was released on 2023-07-20 with total page 1336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2023 collection includes contributions from the following symposia: · 60 Years of Taking Aluminum Smelting Research and Development from New Zealand to the World: An LMD Symposium in Honor of Barry J. Welch · Alumina & Bauxite · Aluminium Industry Emissions Measurement, Reporting & Reduction · Aluminium Waste Management & Utilisation · Aluminum Alloys, Characterization and Processing · Aluminum Reduction Technology · Cast Shop Technology · Electrode Technology for Aluminum Production · Scandium Extraction and Use in Aluminum Alloys
Download or read book Interfacial Physical Chemistry of High Temperature Melts written by Kusuhiro Mukai and published by CRC Press. This book was released on 2019-08-02 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: This English translation of a well-known Japanese book covers interfacial physicochemistry in materials science, especially for iron- and steelmaking processes. Interfacial Physical Chemistry of High-Temperature Melts bridges the gap between the basics and applications of physicochemistry. The book begins with an overview of the fundamentals of interfacial physical chemistry and discusses surface tension, describing the derivation of important equations to guide readers to a deep understanding of the phenomenon. The book then goes on to introduce interfacial properties of high-temperature melts, especially the Marangoni effect, and discusses applications to materials processing at high temperature focusing on recent research results by the author and the co-workers. This book is aimed at researchers, graduate students, and professionals in materials processing. Video clips of in-situ observation including experiments under microgravity condition and x-ray observation are available for download on the publisher's website to allow for a deeper understanding.
Download or read book Electroslag Remelting Towards Clean Steel written by Chengbin Shi and published by Springer Nature. This book was released on 2023-06-22 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the results that the authors have achieved on the study of functional principle of electroslag remelting for production of high-quality clean steel. The dependence of oxygen, sulfur, and non-metallic inclusions on the processing parameters of electroslag remelting is assessed. The fundamentals and technologies of clean steel production by electroslag remelting have been applied in the round to discuss oxygen, sulfur, and non-metallic inclusions evolution and control. A general concluding remark and a perspective for future work are present. The book is likely to be of interest to university teachers, researchers, R&D engineers, and graduate students in material processing and pyrometallurgy who wish to explore innovative technologies that lead to more energy-efficient and environmentally sustainable clean steel production.
Download or read book Multifunctional Ceramic Filter Systems for Metal Melt Filtration written by Christos G. Aneziris and published by Springer Nature. This book was released on with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical Processes for the Early Twenty first Century written by Hong Yong Sohn and published by Minerals, Metals, & Materials Society. This book was released on 1994 with total page 1064 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume collection of 145 international papers examines and discusses the predicted principal features of future metallurgical plants and technologies, the effects of new developments on existing processes, and the future directions of research and education. Discussion topics include: value-addition metallurgy; metals processing; new end emerging technologies; recycling, waste treatment and environmental issues; ironmaking and steelmaking; process modeling; aqueous processing; and plant modernization.
Download or read book Encyclopedia of Ocean Sciences written by and published by Academic Press. This book was released on 2019-04-12 with total page 4318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The oceans cover 70% of the Earth’s surface, and are critical components of Earth’s climate system. This new edition of Encyclopedia of Ocean Sciences, Six Volume Set summarizes the breadth of knowledge about them, providing revised, up to date entries as well coverage of new topics in the field. New and expanded sections include microbial ecology, high latitude systems and the cryosphere, climate and climate change, hydrothermal and cold seep systems. The structure of the work provides a modern presentation of the field, reflecting the input and different perspective of chemical, physical and biological oceanography, the specialized area of expertise of each of the three Editors-in-Chief. In this framework maximum attention has been devoted to making this an organic and unified reference. Represents a one-stop. organic information resource on the breadth of ocean science research Reflects the input and different perspective of chemical, physical and biological oceanography, the specialized area of expertise of each of the three Editors-in-Chief New and expanded sections include microbial ecology, high latitude systems and climate change Provides scientifically reliable information at a foundational level, making this work a resource for students as well as active researches
Download or read book ISIJ International written by and published by . This book was released on 2004 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radial Gradient Coagulation of Non metallic Inclusions and Its Consequences written by V.A Deryabin and published by . This book was released on 1987 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1996 with total page 1622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Chemistry of Fusion Welding written by German F. Deyev and published by DGD Press. This book was released on 2009 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion welding is the main technological process applied in the production of weldments. This title contains representations of physicochemical processes that occur on the borders of contacting phases. It is suitable for practical and scientific specialists in the fields of welding and metallurgy.
