Download or read book Reactive Distillation Design and Control written by William L. Luyben and published by John Wiley & Sons. This book was released on 2009-03-30 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: After an overview of the fundamentals, limitations, and scope of reactive distillation, this book uses rigorous models for steady-state design and dynamic analysis of different types of reactive distillation columns and quantitatively compares the economics of reactive distillation columns with conventional multi-unit processes. It goes beyond traditional steady-state design that primarily considers the capital investment and energy costs when analyzing the control structure and the dynamic robustness of disturbances, and discusses how to maximize the economic and environmental benefits of reactive distillation technology.

Download or read book Reactive Distillation written by Kai Sundmacher and published by John Wiley & Sons. This book was released on 2006-08-21 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a reactive distillation column, both the chemical conversion and the distillative separation of the product mixture are carried out simultaneously. Through this integrative strategy, chemical equilibrium limitations can be overcome, higher selectivities can be achieved and heat of reaction can be directly used for distillation. Increased process efficiency and reduction of investments and operational costs are the direct results of this approach. Highly renowned international experts from both industry and academia review the state-of-the-art and the future directions in application, design, analysis and control of Reactive Distillation processes. Part I surveys various industrial applications and covers both established large scale processes as well as new chemical reaction schemes with high future potential. Part II provides the vital details for analysis of reactive phase equilibria, and discusses the importance of chemical reaction kinetics, while Part III focuses on identifying feasible column configurations and designing their internal structure. Analysis and control of the complex dynamic and steady-state behavior of reactive distillation processes are described in Part IV. Reactive Distillation - a very promising alternative to conventional reaction-distillation flow schemes.

Download or read book Distillation written by Vilmar Steffen and published by BoD – Books on Demand. This book was released on 2019-12-04 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to offer readers important topics on the modeling, simulation, and optimization of distillation processes. The book is divided into four main sections: the first section is introduction to the topic, the second presents work related to distillation process modeling, the third deals with the modeling of phase equilibrium, one of the most important steps of distillation process modeling, and the the fourth looks at the reactive distillation process, a process that has been applied successfully to a number of applications and has been revealed as a promising strategy for a number of recent challenges.

Download or read book Special Distillation Processes written by Zhigang Lei and published by Elsevier. This book was released on 2021-08-21 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special Distillation Processes, Second Edition focuses on the latest developments in the field, such as separation methods that may prove useful for solving problems encountered during research. Topics include extraction, membrane and adsorption distillation involving the separation principle, process design and experimental techniques. The relationship between processes and techniques are also presented. Comprehensive and easy-to-read, this book provides key information needed to understand processes. It will be a valuable reference source for chemical engineers and students wishing to branch out in chemical engineering. - Provides the only comprehensive book available on special distillation processes - Contains a thorough introduction to recent developments in the field - Presents a valuable reference for students, academics and engineers in chemical engineering

Download or read book Structured Catalysts and Reactors written by Andrzej Cybulski and published by CRC Press. This book was released on 2005-11-02 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in structured catalysts is steadily increasing due to the already proven, as well as potential, advantages of these catalysts. Updating the comprehensive coverage of the first edition published in 1998 with the latest science and applications, Structured Catalysts and Reactors, Second Edition gives detailed information on all aspect

Download or read book Process Intensification written by Fernando Israel Gómez-Castro and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-10-21 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intensified processes have found widespread application in the chemical and petrochemical industries. The use of intensified systems allows for a reduction of operating costs and supports the “greening” of chemical processes. However, the design of intensified equipment requires special methodologies. This book describes the fundamentals and applications of these design methods, making it a valuable resource for use in both industry and academia.

Download or read book Modeling and Simulation of Catalytic Reactors for Petroleum Refining written by Jorge Ancheyta and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Simulation of Catalytic Reactors for Petroleum Refining deals with fundamental descriptions of the main conversion processes employed in the petroleum refining industry: catalytic hydrotreating, catalytic reforming, and fluid catalytic cracking. Common approaches for modeling of catalytic reactors for steady-state and dynamic simulations are also described and analyzed. Aspects such as thermodynamics, reaction kinetics, process variables, process scheme, and reactor design are discussed in detail from both research and commercial points of view. Results of simulation with the developed models are compared with those determined at pilot plant scale as well as commercial practice. Kinetics data used in the reactor model are either taken from the literature or obtained under controlled experiments at the laboratory.

Download or read book Petroleum Refinery Process Modeling written by Y. A. Liu and published by John Wiley & Sons. This book was released on 2018-02-09 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the theory and practice of the simulation and optimization of the petroleum refining processes Petroleum Refinery Process Modeling offers a thorough review of how to quantitatively model key refinery reaction and fractionation processes. The text introduces the basics of dealing with the thermodynamics and physical property predictions of hydrocarbon components in the context of process modeling. The authors - three experts on the topic - outline the procedures and include the key data required for building reaction and fractionation models with commercial software. The text shows how to filter through the extensive data available at the refinery and using plant data to begin calibrating available models and extend the models to include key fractionation sub-models. It provides a sound and informed basis to understand and exploit plant phenomena to improve yield, consistency, and performance. In addition, the authors offer information on applying models in an overall refinery context through refinery planning based on linear programming. This important resource: -Offers the basic information of thermodynamics and physical property predictions of hydrocarbon components in the context of process modeling -Uses the key concepts of fractionation lumps and physical properties to develop detailed models and workflows for atmospheric (CDU) and vacuum (VDU) distillation units -Discusses modeling FCC, catalytic reforming and hydroprocessing units Written for chemical engineers, process engineers, and engineers for measurement and control, this resource explores the advanced simulation tools and techniques that are available to support experienced and aid new operators and engineers.

Download or read book 21st European Symposium on Computer Aided Process Engineering written by E. N. Pistikopoulos and published by Elsevier. This book was released on 2011-07-21 with total page 2087 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Symposium on Computer Aided Process Engineering (ESCAPE) series presents the latest innovations and achievements of leading professionals from the industrial and academic communities. The ESCAPE series serves as a forum for engineers, scientists, researchers, managers and students to present and discuss progress being made in the area of computer aided process engineering (CAPE). European industries large and small are bringing innovations into our lives, whether in the form of new technologies to address environmental problems, new products to make our homes more comfortable and energy efficient or new therapies to improve the health and well being of European citizens. Moreover, the European Industry needs to undertake research and technological initiatives in response to humanity's "Grand Challenges," described in the declaration of Lund, namely, Global Warming, Tightening Supplies of Energy, Water and Food, Ageing Societies, Public Health, Pandemics and Security. Thus, the Technical Theme of ESCAPE 21 will be "Process Systems Approaches for Addressing Grand Challenges in Energy, Environment, Health, Bioprocessing & Nanotechnologies."

Download or read book Modeling of Process Intensification written by Frerich J. Keil and published by John Wiley & Sons. This book was released on 2007-06-27 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining the knowledge involved in process engineering and process modeling, this is the first book to cover all modeling methods applicable to process intensification. Both the editors and authors are renowned experts from industry and academia in the various fields of process modeling and integrated chemical processes. Following an introduction to the topic, the book goes on to look at equipment and operational methods, monolithic catalysis, HEX, micro- and reverse flow reactors, catalytic and reactive distillation, the simulated-moving bed and vibration bubble column as well as ultrasound and ultrasonic reactors. A final chapter is devoted to processes under supercritical conditions. In its treatment of hot topics of multidisciplinary interest, this book is of great value to researchers and engineers alike.

Download or read book Distillation written by Marisa Mendes and published by BoD – Books on Demand. This book was released on 2017-06-28 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to offer innovative applications of the distillation process. The book is divided in two main sections, one containing chapters that deal with process design and calculations, and the other, chapters that discuss distillation applications. Moreover, the chapters involve wide applications as in fruit spirits production, in organic liquid compounds produced by oil and fats cracking, energy evaluation in distillation processes, and applicability of solar membrane distillation. I believe that this book will provide new ideas and possibilities of the development of innovative research lines for the readers.

Download or read book Advanced Distillation Technologies written by Anton A. Kiss and published by John Wiley & Sons. This book was released on 2013-02-26 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distillation has historically been the main method for separating mixtures in the chemical process industry. However, despite the flexibility and widespread use of distillation processes, they still remain extremely energy inefficient. Increased optimization and novel distillation concepts can deliver substantial benefits, not just in terms of significantly lower energy use, but also in reducing capital investment and improving eco-efficiency. While likely to remain the separation technology of choice for the next few decades, there is no doubt that distillation technologies need to make radical changes in order to meet the demands of the energy-conscious society. Advanced Distillation Technologies: Design, Control and Applications gives a deep and broad insight into integrated separations using non-conventional arrangements, including both current and upcoming process intensification technologies. It includes: Key concepts in distillation technology Principles of design, control, sizing and economics of distillation Dividing-wall column (DWC) – design, configurations, optimal operation and energy efficient and advanced control DWC applications in ternary separations, azeotropic, extractive and reactive distillation Heat integrated distillation column (HIDiC) – design, equipment and configurations Heat-pump assisted applications (MVR, TVR, AHP, CHRP, TAHP and others) Cyclic distillation technology – concepts, modeling approach, design and control issues Reactive distillation – fundamentals, equipment, applications, feasibility scheme Results of rigorous simulations in Mathworks Matlab & Simulink, Aspen Plus, Dynamics and Custom Modeler Containing abundant examples and industrial case studies, this is a unique resource that tackles the most advanced distillation technologies – all the way from the conceptual design to practical implementation. The author of Advanced Distillation Technologies, Dr. Ir. Anton A. Kiss, has been awarded the Hoogewerff Jongerenprijs 2013. Find out more (website in Dutch)...

Download or read book Model Based Control written by Paul Serban Agachi and published by John Wiley & Sons. This book was released on 2007-09-24 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in the literature for a practical approach to the topic, this book is unique in including a whole section of case studies presenting a wide range of applications from polymerization reactors and bioreactors, to distillation column and complex fluid catalytic cracking units. A section of general tuning guidelines of MPC is also present.These thus aid readers in facilitating the implementation of MPC in process engineering and automation. At the same time many theoretical, computational and implementation aspects of model-based control are explained, with a look at both linear and nonlinear model predictive control. Each chapter presents details related to the modeling of the process as well as the implementation of different model-based control approaches, and there is also a discussion of both the dynamic behaviour and the economics of industrial processes and plants. The book is unique in the broad coverage of different model based control strategies and in the variety of applications presented. A special merit of the book is in the included library of dynamic models of several industrially relevant processes, which can be used by both the industrial and academic community to study and implement advanced control strategies.

Download or read book Distillation Design and Control Using Aspen Simulation written by William L. Luyben and published by John Wiley & Sons. This book was released on 2006-04-20 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely treatment of distillationcombining steady-state designand dynamic controllability As the world continues to seek new sources of energy, the distillation process remains one of the most important separation methods in the chemical, petroleum, and energy industries. And as new renewable sources of energy and chemical feedstocks become more universally utilized, the issues of distillation design and control will remain vital to a future sustainable lifestyle. Distillation Design and Control Using Aspen Simulation introduces the current status and future implications of this vital technology from the dual perspectives of steady-state design and dynamics. Where traditional design texts have focused mainly on the steady-state economic aspects of distillation design, William Luyben also addresses such issues as dynamic performance in the face of disturbances. Utilizing the commercial simulators Aspen Plus and Aspen Dynamics, the text guides future and practicing chemical engineers first in the development of optimal steady-state designs of distillation systems, and then in the development of effective control structures. Unique features of the text include: * In-depth coverage of the dynamics of column design to help develop effective control structures for distillation columns * Development of rigorous simulations of single distillation columns and sequences of columns * Coverage of design and control of petroleum fractionators Encompassing nearly four decades of research and practical developments in this dynamic field, the text represents an important reference for both students and experienced engineers faced with distillation problems.

Download or read book Chemical Process Design and Simulation Aspen Plus and Aspen Hysys Applications written by Juma Haydary and published by John Wiley & Sons. This book was released on 2019-01-16 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and example oriented text for the study of chemical process design and simulation Chemical Process Design and Simulation is an accessible guide that offers information on the most important principles of chemical engineering design and includes illustrative examples of their application that uses simulation software. A comprehensive and practical resource, the text uses both Aspen Plus and Aspen Hysys simulation software. The author describes the basic methodologies for computer aided design and offers a description of the basic steps of process simulation in Aspen Plus and Aspen Hysys. The text reviews the design and simulation of individual simple unit operations that includes a mathematical model of each unit operation such as reactors, separators, and heat exchangers. The author also explores the design of new plants and simulation of existing plants where conventional chemicals and material mixtures with measurable compositions are used. In addition, to aid in comprehension, solutions to examples of real problems are included. The final section covers plant design and simulation of processes using nonconventional components. This important resource: Includes information on the application of both the Aspen Plus and Aspen Hysys software that enables a comparison of the two software systems Combines the basic theoretical principles of chemical process and design with real-world examples Covers both processes with conventional organic chemicals and processes with more complex materials such as solids, oil blends, polymers and electrolytes Presents examples that are solved using a new version of Aspen software, ASPEN One 9 Written for students and academics in the field of process design, Chemical Process Design and Simulation is a practical and accessible guide to the chemical process design and simulation using proven software.

Download or read book Process Synthesis written by Dale F. Rudd and published by Prentice Hall. This book was released on 1973-01-01 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Distillation written by Andrzej Gorak and published by Academic Press. This book was released on 2014-07-22 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distillation: Fundamentals and Principles — winner of the 2015 PROSE Award in Chemistry & Physics — is a single source of authoritative information on all aspects of the theory and practice of modern distillation, suitable for advanced students and professionals working in a laboratory, industrial plants, or a managerial capacity. It addresses the most important and current research on industrial distillation, including all steps in process design (feasibility study, modeling, and experimental validation), together with operation and control aspects. This volume features an extra focus on the conceptual design of distillation. - Winner of the 2015 PROSE Award in Chemistry & Physics from the Association of American Publishers - Practical information on the newest development written by recognized experts - Coverage of a huge range of laboratory and industrial distillation approaches - Extensive references for each chapter facilitates further study