Download or read book Artificial Intelligence Research and Development written by Cecilio Angulo and published by IOS Press. This book was released on 2007 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers which were presented at the 10th anniversary of the International Conference of the ACIA (CCIA'07) in Sant Julia de Loria (Andorra), October 25-26th, 2007. This book is intended for those computer scientists or engineers who are interested in artificial intelligence."

Download or read book Modelling and Control of Mechatronic and Robotic Systems written by Alessandro Gasparetto and published by MDPI. This book was released on 2021-09-02 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently, the modelling and control of mechatronic and robotic systems is an open and challenging field of investigation in both industry and academia. The book encompasses the kinematic and dynamic modelling, analysis, design, and control of mechatronic and robotic systems, with the scope of improving their performance, as well as simulating and testing novel devices and control architectures. A broad range of disciplines and topics are included, such as robotic manipulation, mobile systems, cable-driven robots, wearable and rehabilitation devices, variable stiffness safety-oriented mechanisms, optimization of robot performance, and energy-saving systems.

Download or read book Computational Intelligence written by Kurosh Madani and published by Springer. This book was released on 2014-10-16 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes extended and revised versions of a set of selected papers from the Fourth International Joint Conference on Computational Intelligence (IJCCI 2012)., held in Barcelona, Spain, from 5 to 7 October, 2012. The conference was sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC) and was organized in cooperation with the Association for the Advancement of Artificial Intelligence (AAAI). The conference brought together researchers, engineers and practitioners in computational technologies, especially those related to the areas of fuzzy computation, evolutionary computation and neural computation. It is composed of three co-located conferences, each one specialized in one of the aforementioned -knowledge areas. Namely: - International Conference on Evolutionary Computation Theory and Applications (ECTA) - International Conference on Fuzzy Computation Theory and Applications (FCTA) - International Conference on Neural Computation Theory and Applications (NCTA) Recent progresses in scientific developments and applications in these three areas are reported in this book This book includes revised and extended versions of a strict selection of the best papers presented at the conference.

Download or read book Vibration Control written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2010-08-18 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibrations are a part of our environment and daily life. Many of them are useful and are needed for many purposes, one of the best example being the hearing system. Nevertheless, vibrations are often undesirable and have to be suppressed or reduced, as they may be harmful to structures by generating damages or compromise the comfort of users through noise generation of mechanical wave transmission to the body. the purpose of this book is to present basic and advanced methods for efficiently controlling the vibrations and limiting their effects. Open-access publishing is an extraordinary opportunity for a wide dissemination of high quality research. This book is not an exception to this, and I am proud to introduce the works performed by experts from all over the world.

Download or read book Transactions of the American Society of Civil Engineers written by American Society of Civil Engineers and published by . This book was released on 2003 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. 29-30 contain papers of the International Engineering Congress, Chicago, 1893; v. 54, pts. A-F, papers of the International Engineering Congress, St. Louis, 1904.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonlinear System Identification written by Oliver Nelles and published by Springer Science & Business Media. This book was released on 2001 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written from an engineering point of view, this book covers the most common and important approaches for the identification of nonlinear static and dynamic systems. The book also provides the reader with the necessary background on optimization techniques, making it fully self-contained. The new edition includes exercises.

Download or read book Magnetorheology written by Norman Wereley and published by Royal Society of Chemistry. This book was released on 2014 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading experts provide a timely overview of the key developments in the physics, chemistry and uses of magnetorheological fluids.

Download or read book Engineering Design via Surrogate Modelling written by Alexander Forrester and published by John Wiley & Sons. This book was released on 2008-09-15 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surrogate models expedite the search for promising designs by standing in for expensive design evaluations or simulations. They provide a global model of some metric of a design (such as weight, aerodynamic drag, cost, etc.), which can then be optimized efficiently. Engineering Design via Surrogate Modelling is a self-contained guide to surrogate models and their use in engineering design. The fundamentals of building, selecting, validating, searching and refining a surrogate are presented in a manner accessible to novices in the field. Figures are used liberally to explain the key concepts and clearly show the differences between the various techniques, as well as to emphasize the intuitive nature of the conceptual and mathematical reasoning behind them. More advanced and recent concepts are each presented in stand-alone chapters, allowing the reader to concentrate on material pertinent to their current design problem, and concepts are clearly demonstrated using simple design problems. This collection of advanced concepts (visualization, constraint handling, coping with noisy data, gradient-enhanced modelling, multi-fidelity analysis and multiple objectives) represents an invaluable reference manual for engineers and researchers active in the area. Engineering Design via Surrogate Modelling is complemented by a suite of Matlab codes, allowing the reader to apply all the techniques presented to their own design problems. By applying statistical modelling to engineering design, this book bridges the wide gap between the engineering and statistics communities. It will appeal to postgraduates and researchers across the academic engineering design community as well as practising design engineers. Provides an inclusive and practical guide to using surrogates in engineering design. Presents the fundamentals of building, selecting, validating, searching and refining a surrogate model. Guides the reader through the practical implementation of a surrogate-based design process using a set of case studies from real engineering design challenges. Accompanied by a companion website featuring Matlab software at http://www.wiley.com/go/forrester

Download or read book Semi Active Suspension Control Design for Vehicles written by Sergio M. Savaresi and published by Elsevier. This book was released on 2010-08-13 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semi-Active Suspension Control Design for Vehicles presents a comprehensive discussion of designing control algorithms for semi-active suspensions. It also covers performance analysis and control design. The book evaluates approaches to different control theories, and it includes methods needed for analyzing and evaluating suspension performances, while identifying optimal performance bounds. The structure of the book follows a classical path of control-system design; it discusses the actuator or the variable-damping shock absorber, models and technologies. It also models and discusses the vehicle that is equipped with semi-active dampers, and the control algorithms. The text can be viewed at three different levels: tutorial for novices and students; application-oriented for engineers and practitioners; and methodology-oriented for researchers. The book is divided into two parts. The first part includes chapters 2 to 6, in which fundamentals of modeling and semi-active control design are discussed. The second part includes chapters 6 to 8, which cover research-oriented solutions and case studies. The text is a comprehensive reference book for research engineers working on ground vehicle systems; automotive and design engineers working on suspension systems; control engineers; and graduate students in control theory and ground vehicle systems. - Appropriate as a tutorial for students in automotive systems, an application-oriented reference for engineers, and a control design-oriented text for researchers that introduces semi-active suspension theory and practice - Includes explanations of two innovative semi-active suspension strategies to enhance either comfort or road-holding performance, with complete analyses of both - Also features a case study showing complete implementation of all the presented strategies and summary descriptions of classical control algorithms for controlled dampers

Download or read book Insight into Magnetorheological Shock Absorbers written by Janusz Gołdasz and published by Springer. This book was released on 2014-12-27 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with magnetorheological fluid theory, modeling and applications of automotive magnetorheological dampers. On the theoretical side a review of MR fluid compositions and key factors affecting the characteristics of these fluids is followed by a description of existing applications in the area of vibration isolation and flow-mode shock absorbers in particular. As a majority of existing magnetorheological devices operates in a so-called flow mode a critical review is carried out in that regard. Specifically, the authors highlight common configurations of flow-mode magnetorheological shock absorbers, or so-called MR dampers that have been considered by the automotive industry for controlled chassis applications. The authors focus on single-tube dampers utilizing a piston assembly with one coil or multiple coils and at least one annular flow channel in the piston.

Download or read book Smart Actuation and Sensing Systems written by Giovanni Berselli and published by BoD – Books on Demand. This book was released on 2012-10-17 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the present book, which tries to summarize in an edited format and in a fairly comprehensive manner, many of the recent technical research accomplishments in the area of Smart Actuators and Smart Sensors, is to combine researchers and scientists from different fields into a single virtual room. The book hence reflects the multicultural nature of the field and will allow the reader to taste and appreciate different points of view, different engineering methods and different tools that must be jointly considered when designing and realizing smart actuation and sensing systems.

Download or read book Design and Modeling of Mechanical Systems written by Mohamed Haddar and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 5th International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of the congress (CMSM ́2013), organized by the Unit of Mechanics, Modeling and Manufacturing (U2MP) of the National School of Engineers of Sfax, Tunisia, the Mechanical Engineering Laboratory (MBL) of the National School of Engineers of Monastir, Tunisia and the Mechanics Laboratory of Sousse (LMS) of the National School of Engineers of Sousse, Tunisia, saw a significant increase of the international participation. This edition brought together nearly 300 attendees who exposed their work on the following topics: mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings of CMSM ́2013 and contains a careful selection of high quality contributions, which were exposed during various sessions of the congress. The original articles presented here provide an overview of recent research advancements accomplished in the field mechanical engineering.

Download or read book The Shock Absorber Handbook written by John C. Dixon and published by John Wiley & Sons. This book was released on 2008-02-28 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every one of the many millions of cars manufactured annually worldwide uses shock absorbers, otherwise known as dampers. These form a vital part of the suspension system of any vehicle, essential for optimizing road holding, performance and safety. This, the second edition of the Shock Absorber Handbook (first edition published in 1999), remains the only English language book devoted to the subject. Comprehensive coverage of design, testing, installation and use of the damper has led to the book's acceptance as the authoritative text on the automotive applications of shock absorbers. In this second edition, the author presents a thorough revision of his book to bring it completely up to date. There are numerous detail improvements, and extensive new material has been added particularly on the many varieties of valve design in the conventional hydraulic damper, and on modern developments such as electrorheological and magnetorheological dampers. "The Shock Absorber Handbook, 2nd Edition" provides a thorough treatment of the issues surrounding the design and selection of shock absorbers. It is an invaluable handbook for those working in industry, as well as a principal reference text for students of mechanical and automotive engineering.

Download or read book Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials written by Ubaidillah Sabino and published by Springer Nature. This book was released on 2020-06-01 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2019), held on 16–17 October 2019 in Surakarta, Indonesia. It focuses on two relatively broad areas – advanced materials and sustainable energy – and a diverse range of subtopics: Advanced Materials and Related Technologies: Liquid Crystals, Semiconductors, Superconductors, Optics, Lasers, Sensors, Mesoporous Materials, Nanomaterials, Smart Ferrous Materials, Amorphous Materials, Crystalline Materials, Biomaterials, Metamaterials, Composites, Polymers, Design, Analysis, Development, Manufacturing, Processing and Testing for Advanced Materials. Sustainable Energy and Related Technologies: Energy Management, Storage, Conservation, Industrial Energy Efficiency, Energy-Efficient Buildings, Energy-Efficient Traffic Systems, Energy Distribution, Energy Modeling, Hybrid and Integrated Energy Systems, Fossil Energy, Nuclear Energy, Bioenergy, Biogas, Biomass Geothermal Power, Non-Fossil Energies, Wind Energy, Hydropower, Solar Photovoltaic, Fuel Cells, Electrification, and Electrical Power Systems and Controls.

Download or read book Automotive Mechatronics Operational and Practical Issues written by B. T. Fijalkowski and published by Springer Science & Business Media. This book was released on 2010-11-25 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents operational and practical issues of automotive mechatronics with special emphasis on the heterogeneous automotive vehicle systems approach, and is intended as a graduate text as well as a reference for scientists and engineers involved in the design of automotive mechatronic control systems. As the complexity of automotive vehicles increases, so does the dearth of high competence, multi-disciplined automotive scientists and engineers. This book provides a discussion into the type of mechatronic control systems found in modern vehicles and the skills required by automotive scientists and engineers working in this environment. Divided into two volumes and five parts, Automotive Mechatronics aims at improving automotive mechatronics education and emphasises the training of students’ experimental hands-on abilities, stimulating and promoting experience among high education institutes and produce more automotive mechatronics and automation engineers. The main subject that are treated are: VOLUME I: RBW or XBW unibody or chassis-motion mechatronic control hypersystems; DBW AWD propulsion mechatronic control systems; BBW AWB dispulsion mechatronic control systems; VOLUME II: SBW AWS diversion mechatronic control systems; ABW AWA suspension mechatronic control systems. This volume was developed for undergraduate and postgraduate students as well as for professionals involved in all disciplines related to the design or research and development of automotive vehicle dynamics, powertrains, brakes, steering, and shock absorbers (dampers). Basic knowledge of college mathematics, college physics, and knowledge of the functionality of automotive vehicle basic propulsion, dispulsion, conversion and suspension systems is required.

Download or read book Wearable Robots written by José L. Pons and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wearable robot is a mechatronic system that is designed around the shape and function of the human body, with segments and joints corresponding to those of the person it is externally coupled with. Teleoperation and power amplification were the first applications, but after recent technological advances the range of application fields has widened. Increasing recognition from the scientific community means that this technology is now employed in telemanipulation, man-amplification, neuromotor control research and rehabilitation, and to assist with impaired human motor control. Logical in structure and original in its global orientation, this volume gives a full overview of wearable robotics, providing the reader with a complete understanding of the key applications and technologies suitable for its development. The main topics are demonstrated through two detailed case studies; one on a lower limb active orthosis for a human leg, and one on a wearable robot that suppresses upper limb tremor. These examples highlight the difficulties and potentialities in this area of technology, illustrating how design decisions should be made based on these. As well as discussing the cognitive interaction between human and robot, this comprehensive text also covers: the mechanics of the wearable robot and it’s biomechanical interaction with the user, including state-of-the-art technologies that enable sensory and motor interaction between human (biological) and wearable artificial (mechatronic) systems; the basis for bioinspiration and biomimetism, general rules for the development of biologically-inspired designs, and how these could serve recursively as biological models to explain biological systems; the study on the development of networks for wearable robotics. Wearable Robotics: Biomechatronic Exoskeletons will appeal to lecturers, senior undergraduate students, postgraduates and other researchers of medical, electrical and bio engineering who are interested in the area of assistive robotics. Active system developers in this sector of the engineering industry will also find it an informative and welcome resource.