Download or read book Modelling Geomorphological Systems written by M. G. Anderson and published by . This book was released on 1988-07-04 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses a broad spectrum of topics in current modelling research in hillslope and river channel processes. The book is designed to provide a coherent basis for understanding the potential range of modelling activity within hillslope and channel process investigations and to give readers an appreciation of the modelling challenges that still remain. Topics cover research in specific areas of process study, including equilibrium, mathematical, network, and flow process models. Also discussed are alternative modelling approaches within specific fields, model validation and verification, and the development of computer simulation as a significant and established element in geomorphological investigations.
Download or read book Modelling Geomorphological Systems written by M. G. Anderson and published by . This book was released on 1988 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Geomorphology written by Andrew Goudie and published by Routledge. This book was released on 2013-04-15 with total page 1190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume editor is the leading authority in the field Alphabetically organized in two volumes c.700 comprehensively signed, cross-referenced and indexed entries Detailed bibliographies and suggestions for further reading follow most entries Fully illustrated: over 300 plates and line drawings Written by an editorial team of over 270 experts from over thirty countries
Download or read book Quantitative Modeling of Earth Surface Processes written by Jon D. Pelletier and published by Cambridge University Press. This book was released on 2008-08-07 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes some of the most effective and straightforward quantitative techniques for modeling Earth surface processes. By emphasizing a core set of equations and solution techniques, the book presents state-of-the-art models currently employed in Earth surface process research, as well as a set of simple but practical research tools. Detailed case studies demonstrate application of the methods to a wide variety of processes including hillslope, fluvial, aeolian, glacial, tectonic, and climatic systems. Exercises at the end of each chapter begin with simple calculations and then progress to more sophisticated problems that require computer programming. All the necessary computer codes are available online at www.cambridge.org/9780521855976. Assuming some knowledge of calculus and basic programming experience, this quantitative textbook is designed for advanced geomorphology courses and as a reference book for professional researchers in Earth and planetary science looking for a quantitative approach to Earth surface processes.
Download or read book Geomorphological Techniques written by Andrew Goudie and published by Routledge. This book was released on 2003-09-02 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: The specialist contributors to Geomorphological Techniques have thoroughly augmented and updated their original, authoritative coverage with critical evaluations of major recent developments in this field. A new chapter on neotectonics reflects the impact of developments in tectonic theory, and heavily revised sections deal with advances in remote sensing, image analysis, radiometric dating, geomorphometry, data loggers, radioactive tracers, and the determination of pore water pressure and the rates of denudation.
Download or read book The Basics of Geomorphology written by Kenneth J Gregory and published by SAGE. This book was released on 2014-10-20 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: "I can think of no better guides than Professors Ken Gregory and John Lewin to lead the reader through the conceptual basis of this exciting science." - Victor R. Baker, University of Arizona "A very readable and informative introduction to the discipline for senior undergraduates, postgraduates and researchers." - Angela Gurnell, Queen Mary University of London "Time will tell, but this book may well mark a turning point in the way students and scientists alike perceive Earth surface processes and landforms." - Jonathan Phillips, University of Kentucky This student focused book provides a detailed description and analysis of the key concepts, ideas, and hypotheses that inform geomorphology. Kenneth Gregory and John Lewin explain the basics of landform science in 20 concepts, each the subject of a substantive, cross-referenced entry. They use the idea of the ′geomorphic system′ to organise entries in four sections, with extensive web resources provided for each: System Contexts: The Systems Approach / Uniformitarianism / Landform / Form, Process and Materials / Equilibrium / Complexity and Non Linear Dynamical Systems System Functioning: Cycles and cascades / Force-Resistance / Geomorphic work / Process Form Models System Adjustments: Timescales / Forcings / Change Trajectories / Inheritance and Sensitivity / Anthropocene Drivers for the Future: Geomorphic Hazards / Geomorphic Engineering / Design and Prediction Aligned with the teaching literature, this innovative text provides a fully-functioning learning environment for study, revision, and even self-directed research for both undergraduate and postgraduate students of geomorphology.
Download or read book Geomorphology written by Robert S. Anderson and published by Cambridge University Press. This book was released on 2010-06-17 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern, quantitative, process-oriented approach to geomorphology and the role of Earth surface processes in shaping landforms, starting from basic principles.
Download or read book Tools in Fluvial Geomorphology written by G. Mathias Kondolf and published by John Wiley & Sons. This book was released on 2016-04-28 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluvial Geomorphology studies the biophysical processes acting in rivers, and the sediment patterns and landforms resulting from them. It is a discipline of synthesis, with roots in geology, geography, and river engineering, and with strong interactions with allied fields such as ecology, engineering and landscape architecture. This book comprehensively reviews tools used in fluvial geomorphology, at a level suitable to guide the selection of research methods for a given question. Presenting an integrated approach to the interdisciplinary nature of the subject, it provides guidance for researchers and professionals on the tools available to answer questions on river restoration and management. Thoroughly updated since the first edition in 2003 by experts in their subfields, the book presents state-of-the-art tools that have revolutionized fluvial geomorphology in recent decades, such as physical and numerical modelling, remote sensing and GIS, new field techniques, advances in dating, tracking and sourcing, statistical approaches as well as more traditional methods such as the systems framework, stratigraphic analysis, form and flow characterisation and historical analysis. This book: Covers five main types of geomorphological questions and their associated tools: historical framework; spatial framework; chemical, physical and biological methods; analysis of processes and forms; and future understanding framework. Provides guidance on advantages and limitations of different tools for different applications, data sources, equipment and supplies needed, and case studies illustrating their application in an integrated perspective. It is an essential resource for researchers and professional geomorphologists, hydrologists, geologists, engineers, planners, and ecologists concerned with river management, conservation and restoration. It is a useful supplementary textbook for upper level undergraduate and graduate courses in Geography, Geology, Environmental Science, Civil and Environmental Engineering, and interdisciplinary courses in river management and restoration.
Download or read book Geomorphological Mapping written by Mike J. Smith and published by Elsevier. This book was released on 2011-10-22 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomorphological Mapping: a professional handbook of techniques and applications is a new book targeted at academics and practitioners who use, or wish to utilise, geomorphological mapping within their work. Synthesising for the first time an historical perspective to geomorphological mapping, field based and digital tools and techniques for mapping and an extensive array of case studies from academics and professionals active in the area. Those active in geomorphology, engineering geology, reinsurance, Environmental Impact Assessors, and allied areas, will find the text of immense value. Growth of interest in geomorphological mapping and currently no texts comprehensively cover this topic Extensive case studies that will appeal to professionals, academics and students (with extensive use of diagrams, potentially colour plates) Brings together material on digital mapping (GIS and remote sensing), cartography and data sources with a focus on modern technologies (including GIS, remote sensing and digital terrain analysis) Provides readers with summaries of current advances in methodological/technical aspects Accompanied by electronic resources for digital mapping
Download or read book Handbook of Erosion Modelling written by R. P. C. Morgan and published by John Wiley & Sons. This book was released on 2016-04-13 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The movement of sediment and associated pollutants over thelandscape and into water bodies is of increasing concern withrespect to pollution control, prevention of muddy floods andenvironmental protection. In addition, the loss of soil on site hasimplications for declining agricultural productivity, loss ofbiodiversity and decreased amenity and landscape value. The fate ofsediment and the conservation of soil are important issues for landmanagers and decision-makers. In developing appropriate policiesand solutions, managers and researchers are making greater use oferosion models to characterise the processes of erosion and theirinteraction with the landscape. A study of erosion requires one to think in terms ofmicroseconds to understand the mechanics of impact of a singleraindrop on a soil surface, while landscapes form over periods ofthousands of years. These processes operate on scales ofmillimetres for single raindrops to mega-metres for continents.Erosion modelling thus covers quite a lot of ground. This bookintroduces the conceptual and mathematical frameworks used toformulate models of soil erosion and uses case studies to show howmodels are applied to a variety of purposes at a range of spatialand temporal scales. The aim is to provide land managers and otherswith the tools required to select a model appropriate to the typeand scale of erosion problem, to show what users can expect interms of accuracy of model predictions and to provide anappreciation of both the advantages and limitations of models.Problems covered include those arising from agriculture, theconstruction industry, pollution and climatic change and range inscale from farms to small and large catchments. The book will alsobe useful to students and research scientists as an up-to-datereview of the state-of-art of erosion modelling and, through aknowledge of how models are used in practice, in highlighting thegaps in knowledge that need to be filled in order to develop evenbetter models.
Download or read book Integration of Computer Modeling and Field Observations in Geomorphology written by J.F. Shroder and published by Gulf Professional Publishing. This book was released on 2003-09-26 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The integration of classic field-gathered data with new computer models has allowed many new advances in geomorphology, which the 31st Binghamton Millennium Symposium 2000 presents in this latest of the well-known Binghamton book series, the Integration of Computer Modeling and Field Observations in Geomorphology. Conceptual models have been most commonly inferred from analyses of topography and investigator perspectives derived from fieldwork. The main stumbling blocks to understanding surface processes, their interactions, temporal changes, and resulting landforms are the difficulty of observation, geological timescales involved, spatial-scale dependencies, and the inability to attribute differences to either process or age. Physically based computer models have thus become essential tools, primarily because of their ability to explore spatial and temporal trends and to determine the sensitivity of physical inputs to change without the difficulties of identification and generalization associated with the complexity of field studies. Thus, the combination of both methods, or the integration of field methods with computer modeling become a very powerful mechanism for robust understanding. This new book presents topics on fluvial processes of overland and channelized flow in arid, humid, and periglacial areas of high and low relief, as well as work on interlinked biogeographic and geomorphic fluctuations in alpine terrain, and ground penetrating radar of coastal geomorphology. Issues of long-term evolution of drainage networks are addressed in natural systems, as well as stream-table environments, and terrain analyses characterize surficial and subsurface geomorphic features by using GIS and remote sensing. Botanical and biogeomorphologic controls of landforms are assessed, along with issues of scientific visualization, cartographic representation, DEMs, spatial analyses, and scale dependencies.
Download or read book Geomorphological Models written by F. Ahnert and published by . This book was released on 1987 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Slope processes and slope form; Modelling some influences of soil erosion, landslides and walley gradient on dransity and hollow development; A theoretical study of soil detachability; A model of progressive slope failure under the effect of the neotectonic stress field; process-response models denudation at different spatial scales; Factos influencing structural landform dynamics on the colorado plateau about the necessity of calibrating theoretical models by empirical data; Some reflections modeling hillslope processes; Channels and channel processes; A vertical exchange model for coarse bedload movement numerical considerations; Chaos and order - the channel geometry of gravel bed braided rivers; Lateral migration of stream channels; A mathematical model for the geometry of meander bends; Sediment yield; The relationship between annual rainfall and sediment yield in arid and semi-arid areas. the case of the northern negev; A multivariate statistical analysis of sediment yield and prediction in Romania; Modelling of water and sediment budget: concepts and strategies; Some preliminary latent variable models of stream sediment and discharge characteristics; General considerations; The transport response function and relaxation time in geomorphic modelling; The rolon: hierarchy theory and landscape research; On the problem of geomorphological prediction; The fundamental principles of landscape evolution.
Download or read book Three Dimensional Modeling with Geoscientific Information Systems written by A.K. Turner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: A. K. TURNER Department of Geology and Geological Engineering Colorado School of Mines Golden, Colorado 80401 USA Geology deals with three-dimensional data. Geoscientists are concerned with three dimensional spatial observations, measurements, and explanations of a great variety of phenomena. The representation of three-dimensional data has always been a problem. Prior to computers, graphical displays involved specialized maps, cross-sections, fence diagrams, and geometrical constructions such as stereonets. All were designed to portray three-dimensional relationships on two-dimensional paper products, and all were time consuming to develop. Until recently, computers were of little assistance to three-dimensional data handling and representation problems. Memory was too expensive to handle the huge amounts of data required by three-dimensional assessments; computational speeds were too slow to perform the necessary calculations within a reasonable time; and graphical displays had too Iowa resolution or were much too expensive to produce useful visualizations. Much experience was gained with two-dimensional geographic information systems (GIS), which were applied to many land-use management and resource assessment problems. The two-dimensional GIS field matured rapidly in the late 1980's and became widely accepted. The advent of the modern computer workstation, with its enhanced memory and graphical capabilities at ever more affordable prices, has largely overcome these earlier constraints.
Download or read book 3D Digital Geological Models written by Andrea Bistacchi and published by John Wiley & Sons. This book was released on 2022-04-05 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D DIGITAL GEOLOGICAL MODELS Discover the practical aspects of modeling techniques and their applicability on both terrestrial and extraterrestrial structures A wide overlap exists in the methodologies used by geoscientists working on the Earth and those focused on other planetary bodies in the Solar System. Over the course of a series of sessions at the General Assemblies of the European Geosciences Union in Vienna, the intersection found in 3D characterization and modeling of geological and geomorphological structures for all terrestrial bodies in our solar system revealed that there are similar datasets and common techniques for the study of all planets—Earth and beyond—from a geological point-of-view. By looking at Digital Outcrop Models (DOMs), Digital Elevation Models (DEMs), or Shape Models (SM), researchers may achieve digital representations of outcrops, topographic surfaces, or entire small bodies of the Solar System, like asteroids or comet nuclei. 3D Digital Geological Models: From Terrestrial Outcrops to Planetary Surfaces has two central objectives, to highlight the similarities that geological disciplines have in common when applied to entities in the Solar System, and to encourage interdisciplinary communication and collaboration between different scientific communities. The book particularly focuses on analytical techniques on DOMs, DEMs and SMs that allow for quantitative characterization of outcrops and geomorphological features. It also highlights innovative 3D interpretation and modeling strategies that allow scientists to gain new and more advanced quantitative results on terrestrial and extraterrestrial structures. 3D Digital Geological Models: From Terrestrial Outcrops to Planetary Surfaces readers will also find: The first volume dedicated to this subject matter that successfully integrates methodology and applications A series of methodological chapters that provide instruction on best practices involving DOMs, DEMs, and SMs A wide range of case studies, including small- to large-scale projects on Earth, Mars, the 67P/Churyumov-Gerasimenko comet, and the Moon Examples of how data collected at surface can help reconstruct 3D subsurface models 3D Digital Geological Models: From Terrestrial Outcrops to Planetary Surfaces is a useful reference for academic researchers in earth science, structural geology, geophysics, petroleum geology, remote sensing, geostatistics, and planetary scientists, and graduate students studying in these fields. It will also be of interest for professionals from industry, particularly those in the mining and hydrocarbon fields.
Download or read book Process Modelling and Landform Evolution written by Stefan Hergarten and published by Springer. This book was released on 2006-04-10 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents approaches to landscape modelling not only from geography but also from various related disciplines, especially from applied mathematics, computer science, and geophysics. New methods of terrain representation, analysis and classification are presented as well as short- and long-term process models. The intention of the book is not to give a complete overview of these broad and complex topics, but to stimulate interdisciplinary cooperation and to encourage scientists to consider the ideas of related disciplines.
Download or read book Treatise on Geomorphology written by and published by Academic Press. This book was released on 2013-02-27 with total page 6392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing focus and approach of geomorphic research suggests that the time is opportune for a summary of the state of discipline. The number of peer-reviewed papers published in geomorphic journals has grown steadily for more than two decades and, more importantly, the diversity of authors with respect to geographic location and disciplinary background (geography, geology, ecology, civil engineering, computer science, geographic information science, and others) has expanded dramatically. As more good minds are drawn to geomorphology, and the breadth of the peer-reviewed literature grows, an effective summary of contemporary geomorphic knowledge becomes increasingly difficult. The fourteen volumes of this Treatise on Geomorphology will provide an important reference for users from undergraduate students looking for term paper topics, to graduate students starting a literature review for their thesis work, and professionals seeking a concise summary of a particular topic. Information on the historical development of diverse topics within geomorphology provides context for ongoing research; discussion of research strategies, equipment, and field methods, laboratory experiments, and numerical simulations reflect the multiple approaches to understanding Earth’s surfaces; and summaries of outstanding research questions highlight future challenges and suggest productive new avenues for research. Our future ability to adapt to geomorphic changes in the critical zone very much hinges upon how well landform scientists comprehend the dynamics of Earth’s diverse surfaces. This Treatise on Geomorphology provides a useful synthesis of the state of the discipline, as well as highlighting productive research directions, that Educators and students/researchers will find useful. Geomorphology has advanced greatly in the last 10 years to become a very interdisciplinary field. Undergraduate students looking for term paper topics, to graduate students starting a literature review for their thesis work, and professionals seeking a concise summary of a particular topic will find the answers they need in this broad reference work which has been designed and written to accommodate their diverse backgrounds and levels of understanding Editor-in-Chief, Prof. J. F. Shroder of the University of Nebraska at Omaha, is past president of the QG&G section of the Geological Society of America and present Trustee of the GSA Foundation, while being well respected in the geomorphology research community and having won numerous awards in the field. A host of noted international geomorphologists have contributed state-of-the-art chapters to the work. Readers can be guaranteed that every chapter in this extensive work has been critically reviewed for consistency and accuracy by the World expert Volume Editors and by the Editor-in-Chief himself No other reference work exists in the area of Geomorphology that offers the breadth and depth of information contained in this 14-volume masterpiece. From the foundations and history of geomorphology through to geomorphological innovations and computer modelling, and the past and future states of landform science, no "stone" has been left unturned!
Download or read book Fundamentals of Geomorphology written by Richard John Huggett and published by Routledge. This book was released on 2011-03-15 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively revised, restructured, and updated edition continues to present an engaging and comprehensive introduction to the subject, exploring the world’s landforms from a broad systems perspective. It covers the basics of Earth surface forms and processes, while reflecting on the latest developments in the field. Fundamentals of Geomorphology begins with a consideration of the nature of geomorphology, process and form, history, and geomorphic systems, and moves on to discuss: structure: structural landforms associated with plate tectonics and those associated with volcanoes, impact craters, and folds, faults, and joints process and form: landforms resulting from, or influenced by, the exogenic agencies of weathering, running water, flowing ice and meltwater, ground ice and frost, the wind, and the sea; landforms developed on limestone; and landscape evolution, a discussion of ancient landforms, including palaeosurfaces, stagnant landscape features, and evolutionary aspects of landscape change. This third edition has been fully updated to include a clearer initial explanation of the nature of geomorphology, of land surface process and form, and of land-surface change over different timescales. The text has been restructured to incorporate information on geomorphic materials and processes at more suitable points in the book. Finally, historical geomorphology has been integrated throughout the text to reflect the importance of history in all aspects of geomorphology. Fundamentals of Geomorphology provides a stimulating and innovative perspective on the key topics and debates within the field of geomorphology. Written in an accessible and lively manner, it includes guides to further reading, chapter summaries, and an extensive glossary of key terms. The book is also illustrated throughout with over 200 informative diagrams and attractive photographs, all in colour.
