Download or read book Modelling and Simulation written by Louis G. Birta and published by Springer Science & Business Media. This book was released on 2007-09-07 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a balanced and integrated presentation of modelling and simulation activity for both Discrete Event Dynamic Systems (DEDS) and Continuous Time Dynamic Systems (CYDS). The authors establish a clear distinction between the activity of modelling and that of simulation, maintaining this distinction throughout. The text offers a novel project-oriented approach for developing the modelling and simulation methodology, providing a solid basis for demonstrating the dependency of model structure and granularity on project goals. Comprehensive presentation of the verification and validation activities within the modelling and simulation context is also shown.
Download or read book Handbook of EHealth Evaluation written by Francis Yin Yee Lau and published by . This book was released on 2016-11 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: To order please visit https://onlineacademiccommunity.uvic.ca/press/books/ordering/
Download or read book Methodology for the Modeling and Simulation of Microsystems written by Bartlomiej F. Romanowicz and published by Springer Science & Business Media. This book was released on 1998-10-31 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, technologies for microsystems fabrication have made considerable progress. This has made possible a large variety of new commercial devices ranging, for example, from integrated pressure and acceleration microsensors to active micromirror arrays for image projection. In the near future, there will be a number of new devices, which will be commercialized in many application areas. The field of microsystems is characterized by its wide diversity, which requires a multidisciplinary approach for design and processes as well as in application areas. Although there is a common technological background derived from integrated circuits, it is clear that microsystems will require additional application-specific technologies. Since most microsystem technologies are based on batch processing and dedicated to mass production, prototyping is likely to be an expensive and time-consuming step. It is recognized that standardization of the processes as well as of the design tools will definitely help reduce the entry cost of microsystems. This creates a very challenging situation for the design, modeling and simulation of microsystems. Methodology for the Modeling and Simulation of Microsystems is the first book to give an overview of the problems associated with modeling and simulation of microsystems. It introduces a new methodology, which is supported by several examples. It should provide a useful starting point for both scientists and engineers seeking background information for efficient design of microsystems.
Download or read book Statistics Testing and Defense Acquisition written by National Research Council and published by National Academies Press. This book was released on 1998-05-08 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: For every weapons system being developed, the U.S. Department of Defense (DOD) must make a critical decision: Should the system go forward to full-scale production? The answer to that question may involve not only tens of billions of dollars but also the nation's security and military capabilities. In the milestone process used by DOD to answer the basic acquisition question, one component near the end of the process is operational testing, to determine if a system meets the requirements for effectiveness and suitability in realistic battlefield settings. Problems discovered at this stage can cause significant production delays and can necessitate costly system redesign. This book examines the milestone process, as well as the DOD's entire approach to testing and evaluating defense systems. It brings to the topic of defense acquisition the application of scientific statistical principles and practices.
Download or read book Process Modelling and Simulation written by César de Prada and published by MDPI. This book was released on 2019-09-23 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since process models are nowadays ubiquitous in many applications, the challenges and alternatives related to their development, validation, and efficient use have become more apparent. In addition, the massive amounts of both offline and online data available today open the door for new applications and solutions. However, transforming data into useful models and information in the context of the process industry or of bio-systems requires specific approaches and considerations such as new modelling methodologies incorporating the complex, stochastic, hybrid and distributed nature of many processes in particular. The same can be said about the tools and software environments used to describe, code, and solve such models for their further exploitation. Going well beyond mere simulation tools, these advanced tools offer a software suite built around the models, facilitating tasks such as experiment design, parameter estimation, model initialization, validation, analysis, size reduction, discretization, optimization, distributed computation, co-simulation, etc. This Special Issue collects novel developments in these topics in order to address the challenges brought by the use of models in their different facets, and to reflect state of the art developments in methods, tools and industrial applications.
Download or read book Principles of Modeling and Simulation written by John A. Sokolowski and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores wide-ranging applications of modeling and simulation techniques that allow readers to conduct research and ask "What if?" Principles of Modeling and Simulation: A Multidisciplinary Approach is the first book to provide an introduction to modeling and simulation techniques across diverse areas of study. Numerous researchers from the fields of social science, engineering, computer science, and business have collaborated on this work to explore the multifaceted uses of computational modeling while illustrating their applications in common spreadsheets. The book is organized into three succinct parts: Principles of Modeling and Simulation provides a brief history of modeling and simulation, outlines its many functions, and explores the advantages and disadvantages of using models in problem solving. Two major reasons to employ modeling and simulation are illustrated through the study of a specific problem in conjunction with the use of related applications, thus gaining insight into complex concepts. Theoretical Underpinnings examines various modeling techniques and introduces readers to two significant simulation concepts: discrete event simulation and simulation of continuous systems. This section details the two primary methods in which humans interface with simulations, and it also distinguishes the meaning, importance, and significance of verification and validation. Practical Domains delves into specific topics related to transportation, business, medicine, social science, and enterprise decision support. The challenges of modeling and simulation are discussed, along with advanced applied principles of modeling and simulation such as representation techniques, integration into the application infrastructure, and emerging technologies. With its accessible style and wealth of real-world examples, Principles of Modeling and Simulation: A Multidisciplinary Approach is a valuable book for modeling and simulation courses at the upper-undergraduate and graduate levels. It is also an indispensable reference for researchers and practitioners working in statistics, mathematics, engineering, computer science, economics, and the social sciences who would like to further develop their understanding and knowledge of the field.
Download or read book Modelling and Simulation of Integrated Systems in Engineering written by D J Murray-Smith and published by Elsevier. This book was released on 2012-05-30 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book places particular emphasis on issues of model quality and ideas of model testing and validation. Mathematical and computer-based models provide a foundation for explaining complex behaviour, decision-making, engineering design and for real-time simulators for research and training. Many engineering design techniques depend on suitable models, assessment of the adequacy of a given model for an intended application is therefore critically important. Generic model structures and dependable libraries of sub-models that can be applied repeatedly are increasingly important. Applications are drawn from the fields of mechanical, aeronautical and control engineering, and involve non-linear lumped-parameter models described by ordinary differential equations. Focuses on issues of model quality and the suitability of a given model for a specific application Multidisciplinary problems within engineering feature strongly in the applications The development and testing of nonlinear dynamic models is given very strong emphasis
Download or read book Handbook of Simulation written by Jerry Banks and published by John Wiley & Sons. This book was released on 1998-09-14 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses Buch ist eine unschätzbare Informationsquelle für alle Ingenieure, Designer, Manager und Techniker bei Entwicklung, Studium und Anwendung einer großen Vielzahl von Simulationstechniken. Es vereint die Arbeit internationaler Simulationsexperten aus Industrie und Forschung. Alle Aspekte der Simulation werden in diesem umfangreichen Nachschlagewerk abgedeckt. Der Leser wird vertraut gemacht mit den verschiedenen Techniken von Industriesimulationen sowie mit Einsatz, Anwendungen und Entwicklungen. Neueste Fortschritte wie z.B. objektorientierte Programmierung werden ebenso behandelt wie Richtlinien für den erfolgreichen Umgang mit simulationsgestützten Prozessen. Auch gibt es eine Liste mit den wichtigsten Vertriebs- und Zulieferadressen. (10/98)
Download or read book Modeling and Simulation written by Hans-Joachim Bungartz and published by Springer Science & Business Media. This book was released on 2013-10-24 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Autoren führen auf anschauliche und systematische Weise in die mathematische und informatische Modellierung sowie in die Simulation als universelle Methodik ein. Es geht um Klassen von Modellen und um die Vielfalt an Beschreibungsarten. Aber es geht immer auch darum, wie aus Modellen konkrete Simulationsergebnisse gewonnen werden können. Nach einem kompakten Repetitorium zum benötigten mathematischen Apparat wird das Konzept anhand von Szenarien u. a. aus den Bereichen „Spielen – entscheiden – planen" und „Physik im Rechner" umgesetzt.
Download or read book Modelling and Simulation in Sport and Exercise written by Arnold Baca and published by Routledge. This book was released on 2018-09-03 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and simulation techniques are of central importance to conducting research in sport and exercise science, informing data collection and helping to analyze patterns of movement and physical performance. Modelling and Simulation in Sport and Exercise is the first book to offer an instructive reference for modelling and simulation methods for researchers and sport and exercise scientists. Based around a series of research cases, describing core theories in applied, practical settings, the book draws on examples of modelling and simulation in ball games, biomechanical analysis, physiological testing and monitoring, predictive analysis and sports engineering and product design. Each research case presents a central problem, discusses different modelling approaches that could be used to deal with the issue, analysis of results and a reflection on the methodology and an exercise for students to put the techniques discussed into practice. This is an important reference for any active researcher or upper-level student in sport and exercise science with an interest in mathematical modelling, computer science or simulation techniques.
Download or read book Model Engineering for Simulation written by Lin Zhang and published by Academic Press. This book was released on 2019-02-27 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Engineering for Simulation provides a systematic introduction to the implementation of generic, normalized and quantifiable modeling and simulation using DEVS formalism. It describes key technologies relating to model lifecycle management, including model description languages, complexity analysis, model management, service-oriented model composition, quantitative measurement of model credibility, and model validation and verification. The book clearly demonstrates how to construct computationally efficient, object-oriented simulations of DEVS models on parallel and distributed environments. Guides systems and control engineers in the practical creation and delivery of simulation models using DEVS formalism Provides practical methods to improve credibility of models and manage the model lifecycle Helps readers gain an overall understanding of model lifecycle management and analysis Supported by an online ancillary package that includes an instructors and student solutions manual
Download or read book Modeling and Simulation of Computer Networks and Systems written by Faouzi Zarai and published by Morgan Kaufmann. This book was released on 2015-04-21 with total page 965 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Simulation of Computer Networks and Systems: Methodologies and Applications introduces you to a broad array of modeling and simulation issues related to computer networks and systems. It focuses on the theories, tools, applications and uses of modeling and simulation in order to effectively optimize networks. It describes methodologies for modeling and simulation of new generations of wireless and mobiles networks and cloud and grid computing systems. Drawing upon years of practical experience and using numerous examples and illustrative applications recognized experts in both academia and industry, discuss: Important and emerging topics in computer networks and systems including but not limited to; modeling, simulation, analysis and security of wireless and mobiles networks especially as they relate to next generation wireless networks Methodologies, strategies and tools, and strategies needed to build computer networks and systems modeling and simulation from the bottom up Different network performance metrics including, mobility, congestion, quality of service, security and more... Modeling and Simulation of Computer Networks and Systems is a must have resource for network architects, engineers and researchers who want to gain insight into optimizing network performance through the use of modeling and simulation. Discusses important and emerging topics in computer networks and Systems including but not limited to; modeling, simulation, analysis and security of wireless and mobiles networks especially as they relate to next generation wireless networks Provides the necessary methodologies, strategies and tools needed to build computer networks and systems modeling and simulation from the bottom up Includes comprehensive review and evaluation of simulation tools and methodologies and different network performance metrics including mobility, congestion, quality of service, security and more
Download or read book Modeling and Simulation in the Systems Engineering Life Cycle written by Margaret L. Loper and published by Springer. This book was released on 2015-04-30 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This easy to read text provides a broad introduction to the fundamental concepts of modeling and simulation (M&S) and systems engineering, highlighting how M&S is used across the entire systems engineering lifecycle. Features: reviews the full breadth of technologies, methodologies and uses of M&S, rather than just focusing on a specific aspect of the field; presents contributions from specialists in each topic covered; introduces the foundational elements and processes that serve as the groundwork for understanding M&S; explores common methods and methodologies used in M&S; discusses how best to design and execute experiments, covering the use of Monte Carlo techniques, surrogate modeling and distributed simulation; explores the use of M&S throughout the systems development lifecycle, describing a number of methods, techniques, and tools available to support systems engineering processes; provides a selection of case studies illustrating the use of M&S in systems engineering across a variety of domains.
Download or read book Simulation Modeling and Analysis with ARENA written by Tayfur Altiok and published by Elsevier. This book was released on 2010-07-26 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation Modeling and Analysis with Arena is a highly readable textbook which treats the essentials of the Monte Carlo discrete-event simulation methodology, and does so in the context of a popular Arena simulation environment. It treats simulation modeling as an in-vitro laboratory that facilitates the understanding of complex systems and experimentation with what-if scenarios in order to estimate their performance metrics. The book contains chapters on the simulation modeling methodology and the underpinnings of discrete-event systems, as well as the relevant underlying probability, statistics, stochastic processes, input analysis, model validation and output analysis. All simulation-related concepts are illustrated in numerous Arena examples, encompassing production lines, manufacturing and inventory systems, transportation systems, and computer information systems in networked settings. Introduces the concept of discrete event Monte Carlo simulation, the most commonly used methodology for modeling and analysis of complex systems Covers essential workings of the popular animated simulation language, ARENA, including set-up, design parameters, input data, and output analysis, along with a wide variety of sample model applications from production lines to transportation systems Reviews elements of statistics, probability, and stochastic processes relevant to simulation modeling
Download or read book Guide to Modeling and Simulation of Systems of Systems written by Bernard Zeigler and published by Springer Science & Business Media. This book was released on 2012-10-22 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: This user’s reference is a companion to the separate book also titled “Guide to Modelling and Simulation of Systems of Systems.” The principal book explicates integrated development environments to support virtual building and testing of systems of systems, covering in some depth the MS4 Modelling EnvironmentTM. This user’s reference provides a quick reference and exposition of the various concepts and functional features covered in that book. The topics in the user’s reference are grouped in alignment with the workflow displayed on the MS4 Modeling EnvironmentTM launch page, under the headings Atomic Models, System Entity Structure, Pruning SES, and Miscellaneous. For each feature, the reference discusses why we use it, when we should use it, and how to use it. Further comments and links to related features are also included.
Download or read book Dynamic Biosystem Modeling Simulation Methodology Integrated Accessible written by Joseph Distefano, 3rd and published by . This book was released on 2019-09-16 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is uniquely crafted for use in teaching undergraduate students in the life, math, computer and other sciences and engineering. It is INTRODUCTORY LEVEL, for students who have taken or are currently completing their undergraduate math requirements, and are acquiring analytical-thinking and doing skills, along with introductory biology, chemistry and physics subject matter. It's about learning HOW to model and simulate dynamic biological systems, which also makes it useful for graduate students and professional researchers who want a more rigorous treatment of introductory life science math modeling, integrated with the biology. It brings together the multidisciplinary pedagogy of these subjects into a SINGLE INTRODUCTORY MODELING METHODOLOGY COURSE, crystalizing the experience of an author who has been teaching dynamic biosystems modeling and simulation methodology for the life sciences for more than 50 years. DiStefano maximizes accessibility and "systems-math-biology" integration - without diminishing conceptual rigor. Minimally essential applied math and SYSTEMS ENGINEERING METHODS are included, along with a synopsis of the biology and physiology underlying dynamic biosystem modeling, all in a modeling pedagogy context. This textbook fills a major need in the training of contemporary biology students.Dynamic biosystems modeling methodology is presented over 12 distinctive chapters, primarily with systems diagrams and simple differential equations and algebra for expressing them quantitatively, integrated with the biology. Solving and analyzing (quantifying) the biomodels are then accomplished by simulation, using a facile control system simulation language Simulink, a GUI/Matlab toolbox that emulates control systems diagramming, rather than by "coding" the model in a standard computer programming language. Students see and work with the system model - not the code - a big plus. Higher math and complex analytical solutions are avoided.Each chapter begins with a list of LEARNING GOALS, to help with both perspective for the chapter material, and retrospective, to measure learning. EXERCISES for the student at the end of each chapter are designed to test and reinforce learning. A SOLUTIONS MANUAL for chapter exercises is available to qualified instructors from the author, as are LECTURE SLIDES and LAB ASSIGNMENTS AND SOLUTIONS, for courses that adopt the textbook for student use.
Download or read book Modelling and Simulation Methodology written by Maurice S. Elzas and published by North Holland. This book was released on 1989 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers are grouped into five coherent sections. The first section sets the basis for the rest of the book by addressing fundamental issues. The second section is devoted to specialized computer environments that make Modelling and Simulation easier to perform correctly, while the third section reflects the impact of rule-based methodologies (originated in the AI field) on the world of Modelling and Simulation. Section Four stands in a class of its own as it is based on a novel methodology that in itself is modelled on a biological process, providing promising inroads into the world of adaptive and self-learning methods. The last section describes various applications of the principles to generalised problems of modelling and design.
