Download or read book Modelling and Simulation in Thermal and Chemical Engineering written by J. Thoma and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main object of this advanced textbook is modelling and simulation of energetic processes by bond graphs. But even without knowledge of this powerful method, it can be used to a certain extent as an introduction to simulation in thermodynamics.
Download or read book Modeling and Simulation in Chemical Engineering written by Christo Boyadjiev and published by Springer Nature. This book was released on 2021-12-08 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a theoretical analysis of the modern methods used for modeling various chemical engineering processes. Currently, the two primary problems in the chemical industry are the optimal design of new devices and the optimal control of active processes. Both of these problems are often solved by developing new methods of modeling. These methods for modeling specific processes may be different, but in all cases, they bring the mathematical description closer to the real processes by using appropriate experimental data. In this book, the authors detail a new approach for the modeling of chemical processes in column apparatuses. Further, they describe the types of neural networks that have been shown to be effective in solving important chemical engineering problems. Readers are also presented with mathematical models of integrated bioethanol supply chains (IBSC) that achieve improved economic and environmental sustainability. The integration of energy and mass processes is one of the most powerful tools for creating sustainable and energy efficient production systems. This book defines the main approaches for the thermal integration of periodic processes, direct and indirect, and the recent integration of small-scale solar thermal dryers with phase change materials as energy accumulators. An exciting overview of new approaches for the modeling of chemical engineering processes, this book serves as a guide for the important innovations being made in theoretical chemical engineering.
Download or read book Modeling and Simulation of Chemical Process Systems written by Nayef Ghasem and published by CRC Press. This book was released on 2018-11-08 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this textbook, the author teaches readers how to model and simulate a unit process operation through developing mathematical model equations, solving model equations manually, and comparing results with those simulated through software. It covers both lumped parameter systems and distributed parameter systems, as well as using MATLAB and Simulink to solve the system model equations for both. Simplified partial differential equations are solved using COMSOL, an effective tool to solve PDE, using the fine element method. This book includes end of chapter problems and worked examples, and summarizes reader goals at the beginning of each chapter.
Download or read book Process Modelling and Simulation in Chemical Biochemical and Environmental Engineering written by Ashok Kumar Verma and published by CRC Press. This book was released on 2014-10-17 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of simulation plays a vital part in developing an integrated approach to process design. By helping save time and money before the actual trial of a concept, this practice can assist with troubleshooting, design, control, revamping, and more. Process Modelling and Simulation in Chemical, Biochemical and Environmental Engineering explores effective modeling and simulation approaches for solving equations. Using a systematic treatment of model development and simulation studies for chemical, biochemical, and environmental processes, this book explains the simplification of a complicated process at various levels with the help of a "model sketch." It introduces several types of models, examines how they are developed, and provides examples from a wide range of applications. This includes the simple models based on simple laws such as Fick’s law, models that consist of generalized equations such as equations of motion, discrete-event models and stochastic models (which consider at least one variable as a discrete variable), and models based on population balance. Divided into 11 chapters, this book: Presents a systematic approach of model development in view of the simulation need Includes modeling techniques to model hydrodynamics, mass and heat transfer, and reactors for single as well as multi-phase systems Provides stochastic and population balance models Covers the application and development of artificial neural network models and hybrid ANN models Highlights gradients based techniques as well as statistical techniques for model validation and sensitivity analysis Contains examples on development of analytical, stochastic, numerical, and ANN-based models and simulation studies using them Illustrates modeling concepts with a wide spectrum of classical as well as recent research papers Process Modelling and Simulation in Chemical, Biochemical and Environmental Engineering includes recent trends in modeling and simulation, e.g. artificial neural network (ANN)-based models, and hybrid models. It contains a chapter on flowsheeting and batch processes using commercial/open source software for simulation.
Download or read book Process Modeling and Simulation for Chemical Engineers written by Simant R. Upreti and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a rigorous treatment of the fundamental concepts and techniques involved in process modeling and simulation. The book allows the reader to: (i) Get a solid grasp of “under-the-hood” mathematical results (ii) Develop models of sophisticated processes (iii) Transform models to different geometries and domains as appropriate (iv) Utilize various model simplification techniques (v) Learn simple and effective computational methods for model simulation (vi) Intensify the effectiveness of their research Modeling and Simulation for Chemical Engineers: Theory and Practice begins with an introduction to the terminology of process modeling and simulation. Chapters 2 and 3 cover fundamental and constitutive relations, while Chapter 4 on model formulation builds on these relations. Chapters 5 and 6 introduce the advanced techniques of model transformation and simplification. Chapter 7 deals with model simulation, and the final chapter reviews important mathematical concepts. Presented in a methodical, systematic way, this book is suitable as a self-study guide or as a graduate reference, and includes examples, schematics and diagrams to enrich understanding. End of chapter problems with solutions and computer software available online at www.wiley.com/go/upreti/pms_for_chemical_engineers are designed to further stimulate readers to apply the newly learned concepts.
Download or read book Modeling and Simulation of Thermal Power Plants with ThermoSysPro written by Baligh El Hefni and published by Springer. This book was released on 2019-01-24 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the modelling and simulation of thermal power plants, and introduces readers to the equations needed to model a wide range of industrial energy processes. Also featuring a wealth of illustrative, real-world examples, it covers all types of power plants, including nuclear, fossil-fuel, solar and biomass. The book is based on the authors’ expertise and experience in the theory of power plant modelling and simulation, developed over many years of service with EDF. In more than forty examples, they demonstrate the component elements involved in a broad range of energy production systems, with detailed test cases for each chemical, thermodynamic and thermo-hydraulic model. Each of the test cases includes the following information: • component description and parameterization data; • modelling hypotheses and simulation results; • fundamental equations and correlations, with their validity domains; • model validation, and in some cases, experimental validation; and • single-phase flow and two-phase flow modelling equations, which cover all water and steam phases. A practical volume that is intended for a broad readership, from students and researchers, to professional engineers, this book offers the ideal handbook for the modelling and simulation of thermal power plants. It is also a valuable aid in understanding the physical and chemical phenomena that govern the operation of power plants and energy processes.
Download or read book Chemical Engineering written by Tanase Gh. Dobre and published by Wiley-VCH. This book was released on 2007-06-27 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: A description of the use of computer aided modeling and simulation in the development, integration and optimization of industrial processes. The two authors elucidate the entire procedure step-by-step, from basic mathematical modeling to result interpretation and full-scale process performance analysis. They further demonstrate similitude comparisons of experimental results from different systems as a tool for broadening the applicability of the calculation methods. Throughout, the book adopts a very practical approach, addressing actual problems and projects likely to be encountered by the reader, as well as fundamentals and solution strategies for complex problems. It is thus equally useful for student and professional engineers and chemists involved in industrial process and production plant design, construction or upgrading.
Download or read book A Step by Step Approach to the Modeling of Chemical Engineering Processes written by Liliane Maria Ferrareso Lona and published by Springer. This book was released on 2017-12-15 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats modeling and simulation in a simple way, that builds on the existing knowledge and intuition of students. They will learn how to build a model and solve it using Excel. Most chemical engineering students feel a shiver down the spine when they see a set of complex mathematical equations generated from the modeling of a chemical engineering system. This is because they usually do not understand how to achieve this mathematical model, or they do not know how to solve the equations system without spending a lot of time and effort. Trying to understand how to generate a set of mathematical equations to represent a physical system (to model) and solve these equations (to simulate) is not a simple task. A model, most of the time, takes into account all phenomena studied during a Chemical Engineering course. In the same way, there is a multitude of numerical methods that can be used to solve the same set of equations generated from the modeling, and many different computational languages can be adopted to implement the numerical methods. As a consequence of this comprehensiveness and combinatorial explosion of possibilities, most books that deal with this subject are very extensive and embracing, making need for a lot of time and effort to go through this subject. It is expected that with this book the chemical engineering student and the future chemical engineer feel motivated to solve different practical problems involving chemical processes, knowing they can do that in an easy and fast way, with no need of expensive software.
Download or read book Modelling Simulation and Control of Thermal Energy Systems written by Kwang Y. Lee and published by MDPI. This book was released on 2020-11-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Faced with an ever-growing resource scarcity and environmental regulations, the last 30 years have witnessed the rapid development of various renewable power sources, such as wind, tidal, and solar power generation. The variable and uncertain nature of these resources is well-known, while the utilization of power electronic converters presents new challenges for the stability of the power grid. Consequently, various control and operational strategies have been proposed and implemented by the industry and research community, with a growing requirement for flexibility and load regulation placed on conventional thermal power generation. Against this background, the modelling and control of conventional thermal engines, such as those based on diesel and gasoline, are experiencing serious obstacles when facing increasing environmental concerns. Efficient control that can fulfill the requirements of high efficiency, low pollution, and long durability is an emerging requirement. The modelling, simulation, and control of thermal energy systems are key to providing innovative and effective solutions. Through applying detailed dynamic modelling, a thorough understanding of the thermal conversion mechanism(s) can be achieved, based on which advanced control strategies can be designed to improve the performance of the thermal energy system, both in economic and environmental terms. Simulation studies and test beds are also of great significance for these research activities prior to proceeding to field tests. This Special Issue will contribute a practical and comprehensive forum for exchanging novel research ideas or empirical practices that bridge the modelling, simulation, and control of thermal energy systems. Papers that analyze particular aspects of thermal energy systems, involving, for example, conventional power plants, innovative thermal power generation, various thermal engines, thermal energy storage, and fundamental heat transfer management, on the basis of one or more of the following topics, are invited in this Special Issue: • Power plant modelling, simulation, and control; • Thermal engines; • Thermal energy control in building energy systems; • Combined heat and power (CHP) generation; • Thermal energy storage systems; • Improving thermal comfort technologies; • Optimization of complex thermal systems; • Modelling and control of thermal networks; • Thermal management of fuel cell systems; • Thermal control of solar utilization; • Heat pump control; • Heat exchanger control.
Download or read book Modeling and Simulation in Chemical Engineering written by Roger G. E. Franks and published by Wiley-Interscience. This book was released on 1972-06-16 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Modeling and Simulation for Chemical Engineers written by Simant Ranjan Upreti and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a rigorous treatment of the fundamental concepts and techniques involved in process modeling and simulation. The book allows the reader to: (i) Get a solid grasp of "under-the-hood" mathematical results (ii) Develop models of sophisticated processes (iii) Transform models to different geometries and domains as appropriate (iv) Utilize various model simplification techniques (v) Learn simple and effective computational methods for model simulation (vi) Intensify the effectiveness of their research Modeling and Simulation for Chemical Engineers: Theory and Practice begins with an introduction to the terminology of process modeling and simulation. Chapters 2 and 3 cover fundamental and constitutive relations, while Chapter 4 on model formulation builds on these relations. Chapters 5 and 6 introduce the advanced techniques of model transformation and simplification. Chapter 7 deals with model simulation, and the final chapter reviews important mathematical concepts. Presented in a methodical, systematic way, this book is suitable as a self-study guide or as a graduate reference, and includes examples, schematics and diagrams to enrich understanding. End of chapter problems (with solutions and computer software available online) are designed to further stimulate readers to apply the newly-learned concepts. End of chapter problems (with solutions and computer software available online ) are designed to further stimulate readers to apply the newly learned concepts.
Download or read book Chemical Engineering Dynamics written by John Ingham and published by John Wiley & Sons. This book was released on 2008-02-08 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the modelling of dynamic chemical engineering processes is presented in a highly understandable way using the unique combination of simplified fundamental theory and direct hands-on computer simulation. The mathematics is kept to a minimum, and yet the nearly 100 examples supplied on www.wiley-vch.de illustrate almost every aspect of chemical engineering science. Each example is described in detail, including the model equations. They are written in the modern user-friendly simulation language Berkeley Madonna, which can be run on both Windows PC and Power-Macintosh computers. Madonna solves models comprising many ordinary differential equations using very simple programming, including arrays. It is so powerful that the model parameters may be defined as "sliders", which allow the effect of their change on the model behavior to be seen almost immediately. Data may be included for curve fitting, and sensitivity or multiple runs may be performed. The results can be seen simultaneously on multiple-graph windows or by using overlays. The resultant learning effect of this is tremendous. The examples can be varied to fit any real situation, and the suggested exercises provide practical guidance. The extensive experience of the authors, both in university teaching and international courses, is reflected in this well-balanced presentation, which is suitable for the teacher, the student, the chemist or the engineer. This book provides a greater understanding of the formulation and use of mass and energy balances for chemical engineering, in a most stimulating manner. This book is a third edition, which also includes biological, environmental and food process examples.
Download or read book Heat Transfer Modeling written by George Sidebotham and published by Springer. This book was released on 2015-02-13 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This innovative text emphasizes a "less-is-more" approach to modeling complicated systems such as heat transfer by treating them first as "1-node lumped models" that yield simple closed-form solutions. The author develops numerical techniques for students to obtain more detail, but also trains them to use the techniques only when simpler approaches fail. Covering all essential methods offered in traditional texts, but with a different order, Professor Sidebotham stresses inductive thinking and problem solving as well as a constructive understanding of modern, computer-based practice. Readers learn to develop their own code in the context of the material, rather than just how to use packaged software, offering a deeper, intrinsic grasp behind models of heat transfer. Developed from over twenty-five years of lecture notes to teach students of mechanical and chemical engineering at The Cooper Union for the Advancement of Science and Art, the book is ideal for students and practitioners across engineering disciplines seeking a solid understanding of heat transfer. This book also: · Adopts a novel inductive pedagogy where commonly understood examples are introduced early and theory is developed to explain and predict readily recognized phenomena · Introduces new techniques as needed to address specific problems, in contrast to traditional texts’ use of a deductive approach, where abstract general principles lead to specific examples · Elucidates readers’ understanding of the "heat transfer takes time" idea—transient analysis applications are introduced first and steady-state methods are shown to be a limiting case of those applications · Focuses on basic numerical methods rather than analytical methods of solving partial differential equations, largely obsolete in light of modern computer power · Maximizes readers’ insights to heat transfer modeling by framing theory as an engineering design tool, not as a pure science, as has been done in traditional textbooks · Integrates practical use of spreadsheets for calculations and provides many tips for their use throughout the text examples
Download or read book Mathematical Modelling and Simulation in Chemical Engineering written by M. Chidambaram and published by Cambridge University Press. This book was released on 2018-03-09 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: An easy to understand guide covering key principles of mathematical modelling and simulation in chemical engineering.
Download or read book Modeling and Simulation in Engineering Sciences written by Noreen Sher Akbar and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features state-of-the-art contributions in mathematical, experimental and numerical simulations in engineering sciences. The contributions in this book, which comprise twelve chapters, are organized in six sections spanning mechanical, aerospace, electrical, electronic, computer, materials, geotechnical and chemical engineering. Topics include metal micro-forming, compressible reactive flows, radio frequency circuits, barrier infrared detectors, fiber Bragg and long-period fiber gratings, semiconductor modelling, many-core architecture computers, laser processing of materials, alloy phase decomposition, nanofluids, geo-materials and rheo-kinetics. Contributors are from Europe, China, Mexico, Malaysia and Iran. The chapters feature many sophisticated approaches including Monte Carlo simulation, FLUENT and ABAQUS computational modelling, discrete element modelling and partitioned frequency-time methods. The book will be of interest to researchers and also consultants engaged in many areas of engineering simulation.
Download or read book Chemical Engineering Dynamics written by John Ingham and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the reader is guided through the complex study of dynamic chemical engineering systems by the unique combination of a simplified presentation of the fundamental theory (Part 1) and direct hands-on computer experimentation with the provision of 85 accompanying computer-based simulation examples (Part 2) supplied on diskette. The ISIM digital simulation language is very simple to use and its powerful interactive nature enables the readers to create their own simulations, based on their own specific problems. This powerful dynamic ISIM software is ready to run on any DOS personal computer. The treatment employed in this book is well tried and tested, based on over 20 years experience in teaching an international post- experience course. Whether for the teacher, the student, the chemist or engineer, this book serves as the key to a greater understanding of chemical engineering dynamics through the fun and enjoyment of active learning.
Download or read book Mesoscale Modeling in Chemical Engineering written by and published by Academic Press. This book was released on 2016-02-16 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mesoscale Modeling in Chemical Engineering, a volume in the Advances in Chemical Engineering series provides the reader with personal views of authorities in the field. Subjects covered are not limited to the classical chemical engineering disciplines, with contributions connecting chemical engineering to related scientific fields, thus providing new ideas for additional thought. The book balances well developed areas such as process industry, transformation of materials, energy, and environmental issues with areas where applications of chemical engineering are more recent or emerging. Contains reviews by leading authorities in the respective areas Presents Up-to-date reviews of latest techniques in modeling of catalytic processes Includes a mix of US and European authors, as well as academic/industrial/research institute perspectives Contains the critical connections between computation and experimental methods
