Download or read book Modelling and Simulation written by IASTED International Conference (1993: Pittsburgh, PA) and published by . This book was released on 1993 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific Modeling and Simulations written by Sidney Yip and published by Springer Science & Business Media. This book was released on 2010-04-07 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although computational modeling and simulation of material deformation was initiated with the study of structurally simple materials and inert environments, there is an increasing demand for predictive simulation of more realistic material structure and physical conditions. In particular, it is recognized that applied mechanical force can plausibly alter chemical reactions inside materials or at material interfaces, though the fundamental reasons for this chemomechanical coupling are studied in a material-speci c manner. Atomistic-level s- ulations can provide insight into the unit processes that facilitate kinetic reactions within complex materials, but the typical nanosecond timescales of such simulations are in contrast to the second-scale to hour-scale timescales of experimentally accessible or technologically relevant timescales. Further, in complex materials these key unit processes are “rare events” due to the high energy barriers associated with those processes. Examples of such rare events include unbinding between two proteins that tether biological cells to extracellular materials [1], unfolding of complex polymers, stiffness and bond breaking in amorphous glass bers and gels [2], and diffusive hops of point defects within crystalline alloys [3].

Download or read book Principles of Modeling and Simulation written by John A. Sokolowski and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores wide-ranging applications of modeling and simulation techniques that allow readers to conduct research and ask "What if?" Principles of Modeling and Simulation: A Multidisciplinary Approach is the first book to provide an introduction to modeling and simulation techniques across diverse areas of study. Numerous researchers from the fields of social science, engineering, computer science, and business have collaborated on this work to explore the multifaceted uses of computational modeling while illustrating their applications in common spreadsheets. The book is organized into three succinct parts: Principles of Modeling and Simulation provides a brief history of modeling and simulation, outlines its many functions, and explores the advantages and disadvantages of using models in problem solving. Two major reasons to employ modeling and simulation are illustrated through the study of a specific problem in conjunction with the use of related applications, thus gaining insight into complex concepts. Theoretical Underpinnings examines various modeling techniques and introduces readers to two significant simulation concepts: discrete event simulation and simulation of continuous systems. This section details the two primary methods in which humans interface with simulations, and it also distinguishes the meaning, importance, and significance of verification and validation. Practical Domains delves into specific topics related to transportation, business, medicine, social science, and enterprise decision support. The challenges of modeling and simulation are discussed, along with advanced applied principles of modeling and simulation such as representation techniques, integration into the application infrastructure, and emerging technologies. With its accessible style and wealth of real-world examples, Principles of Modeling and Simulation: A Multidisciplinary Approach is a valuable book for modeling and simulation courses at the upper-undergraduate and graduate levels. It is also an indispensable reference for researchers and practitioners working in statistics, mathematics, engineering, computer science, economics, and the social sciences who would like to further develop their understanding and knowledge of the field.

Download or read book System Design Modeling and Simulation written by Claudius Ptolemaeus and published by Lee & Seshia. This book was released on 2013-09-27 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a definitive introduction to models of computation for the design of complex, heterogeneous systems. It has a particular focus on cyber-physical systems, which integrate computing, networking, and physical dynamics. The book captures more than twenty years of experience in the Ptolemy Project at UC Berkeley, which pioneered many design, modeling, and simulation techniques that are now in widespread use. All of the methods covered in the book are realized in the open source Ptolemy II modeling framework and are available for experimentation through links provided in the book. The book is suitable for engineers, scientists, researchers, and managers who wish to understand the rich possibilities offered by modern modeling techniques. The goal of the book is to equip the reader with a breadth of experience that will help in understanding the role that such techniques can play in design.

Download or read book Second International Conference on Modelling and Simulation written by and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modelling and Simulation 1993 written by Alain Pavé (Biometrician) and published by . This book was released on 1993 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced System Modelling and Simulation with Block Diagram Languages written by Nicholas M. Karayanakis and published by CRC Press. This book was released on 1995-06-09 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced System Modelling and Simulation with Block Diagram Languages explores and describes the use of block languages in dynamic modelling and simulation. The application of block diagrams to dynamic modelling is reviewed, not only in terms of known components and systems, but also in terms of the development of new systems. Methods by which block diagrams clarify the dynamic essence of systems and their components are emphasized throughout the book, and sufficient introductory material is included to elucidate the book's advanced material. Widely used continuous dynamic system simulation (CDSS) languages are analyzed, and their technical features are discussed. This self-contained resource includes a review section on block diagram algebra and applied transfer functions, both of which are important mathematical subjects, relevant to the understanding of continuous dynamic system simulation.

Download or read book Mathematical Modeling and Simulation written by Kai Velten and published by John Wiley & Sons. This book was released on 2009-06-01 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise and clear introduction to the topic requires only basic knowledge of calculus and linear algebra - all other concepts and ideas are developed in the course of the book. Lucidly written so as to appeal to undergraduates and practitioners alike, it enables readers to set up simple mathematical models on their own and to interpret their results and those of others critically. To achieve this, many examples have been chosen from various fields, such as biology, ecology, economics, medicine, agricultural, chemical, electrical, mechanical and process engineering, which are subsequently discussed in detail. Based on the author`s modeling and simulation experience in science and engineering and as a consultant, the book answers such basic questions as: What is a mathematical model? What types of models do exist? Which model is appropriate for a particular problem? What are simulation, parameter estimation, and validation? The book relies exclusively upon open-source software which is available to everybody free of charge. The entire book software - including 3D CFD and structural mechanics simulation software - can be used based on a free CAELinux-Live-DVD that is available in the Internet (works on most machines and operating systems).

Download or read book Agricultural Systems Modeling and Simulation written by Robert M. Peart and published by CRC Press. This book was released on 2018-10-03 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a treatment of modern applications of modelling and simulation in crop, livestock, forage/livestock systems, and field operations. The book discusses methodologies from linear programming and neutral networks, to expert or decision support systems, as well as featuring models, such as SOYGRO, CROPGRO and GOSSYM/COMAX. It includes coverage on evaporation and evapotranspiration, the theory of simulation based on biological processes, and deficit irrigation scheduling.

Download or read book Bond Graph Model based Fault Diagnosis of Hybrid Systems written by Wolfgang Borutzky and published by Springer. This book was released on 2014-11-04 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents bond graph model-based fault detection with a focus on hybrid system models. The book addresses model design, simulation, control and model-based fault diagnosis of multidisciplinary engineering systems. The text beings with a brief survey of the state-of-the-art, then focuses on hybrid systems. The author then uses different bond graph approaches throughout the text and provides case studies.

Download or read book Biomedical Modeling and Simulation on a PC written by Rogier P.van Wijk van Brievingh and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: I have long had an interest in the life sciences, but have had few opportunities to indulge that interest in my professional activities. It has only been through simulation that those opportunities have arisen. Some of my most enjoyable classes were those I taught to students in the life sciences, where I attempted to show them the value of simulation to their discipline. That there is such a value cannot be questioned. Whether you are interested in population ecology, phar macokinetics, the cardiovascular system, or cell interaction, simulation can play a vital role in explaining the underlying processes and in enhancing our understanding of these processes. This book comprises an excellent collection of contributions, and clearly demonstrates the value of simulation in the particular areas of physiology and bioengineering. My main frustration when teaching these classes to people with little or no computer background was the lack of suitable simulation software. This di rectly inspired my own attempts at producing software usable by the computer novice. It is especially nice that software is available that enables readers to experience the examples in this book for themselves. I would like to congratulate and thank the editors, Rogier P. van Wijk van Brievingh and Dietmar P. P. Moller, for all of their excellent efforts. They should be proud of their achievement. This is the sixth volume in the Advances in Simulation series, and other volumes are in preparation.

Download or read book International Congress on Modelling and Simulation December 6 10 1993 The University of Western Australia written by Michael McAleer and published by . This book was released on 1994 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Conceptual Modeling for Discrete Event Simulation written by Stewart Robinson and published by CRC Press. This book was released on 2010-08-02 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together an international group of researchers involved in military, business, and health modeling and simulation, Conceptual Modeling for Discrete-Event Simulation presents a comprehensive view of the current state of the art in the field. The book addresses a host of issues, including: What is a conceptual model?How is conceptual modelin

Download or read book Principles of Object Oriented Modeling and Simulation with Modelica 2 1 written by Peter Fritzson and published by John Wiley & Sons. This book was released on 2010-08-31 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an introduction to modern object-oriented design principles and applications for the fast-growing area of modeling and simulation Covers the topic of multi-domain system modeling and design with applications that have components from several areas Serves as a reference for the Modelica language as well as a comprehensive overview of application model libraries for a number of application domains

Download or read book Air Pollution Modelling and Simulation written by Bruno Sportisse and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collates the written contributions of the Second Conference on Air Pollution Modelling and Simulation (APMS 2001). A wide range of current topics is covered, focusing on three challenging issues: (1) the modelling issue of complex, multiphase, atmospheric chemistry; (2) the numerical issue associated with comprehensive three-dimensional chemistry-transport models; and (3) the key issues of data assimilation and inverse modelling. State-of-the art research is presented with many operational procedures applied at either forecast agencies or companies.

Download or read book Principles of Object Oriented Modeling and Simulation with Modelica 3 3 written by Peter Fritzson and published by John Wiley & Sons. This book was released on 2015-01-06 with total page 1268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fritzson covers the Modelica language in impressive depth from the basic concepts such as cyber-physical, equation-base, object-oriented, system, model, and simulation, while also incorporating over a hundred exercises and their solutions for a tutorial, easy-to-read experience. The only book with complete Modelica 3.3 coverage Over one hundred exercises and solutions Examines basic concepts such as cyber-physical, equation-based, object-oriented, system, model, and simulation

Download or read book Introduction to Modeling and Simulation of Technical and Physical Systems with Modelica written by Peter Fritzson and published by John Wiley & Sons. This book was released on 2011-10-03 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master modeling and simulation using Modelica, the new powerful, highly versatile object-based modeling language Modelica, the new object-based software/hardware modeling language that is quickly gaining popularity around the world, offers an almost universal approach to high-level computational modeling and simulation. It handles a broad range of application domains, for example mechanics, electrical systems, control, and thermodynamics, and facilitates general notation as well as powerful abstractions and efficient implementations. Using the versatile Modelica language and its associated technology, this text presents an object-oriented, component-based approach that makes it possible for readers to quickly master the basics of computer-supported equation-based object-oriented (EOO) mathematical modeling and simulation. Throughout the text, Modelica is used to illustrate the various aspects of modeling and simulation. At the same time, a number of key concepts underlying the Modelica language are explained with the use of modeling and simulation examples. This book: Examines basic concepts such as systems, models, and simulations Guides readers through the Modelica language with the aid of several step-by-step examples Introduces the Modelica class concept and its use in graphical and textual modeling Explores modeling methodology for continuous, discrete, and hybrid systems Presents an overview of the Modelica Standard Library and key Modelica model libraries Readers will find plenty of examples of models that simulate distinct application domains as well as examples that combine several domains. All the examples and exercises in the text are available via DrModelica. This electronic self-teaching program, freely available on the text's companion website, guides readers from simple, introductory examples and exercises to more advanced ones. Written by the Director of the Open Source Modelica Consortium, Introduction to Modeling and Simulation of Technical and Physical Systems with Modelica is recommended for engineers and students interested in computer-aided design, modeling, simulation, and analysis of technical and natural systems. By building on basic concepts, the text is ideal for students who want to learn modeling, simulation, and object orientation.