Download or read book Modelling and Optimization of Distributed Parameter Systems Applications to engineering written by K. Malanowski and published by Springer. This book was released on 2013-06-05 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spatio Temporal Modeling of Nonlinear Distributed Parameter Systems written by Han-Xiong Li and published by Springer Science & Business Media. This book was released on 2011-02-24 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this volume is to provide a brief review of the previous work on model reduction and identifi cation of distributed parameter systems (DPS), and develop new spatio-temporal models and their relevant identifi cation approaches. In this book, a systematic overview and classifi cation on the modeling of DPS is presented fi rst, which includes model reduction, parameter estimation and system identifi cation. Next, a class of block-oriented nonlinear systems in traditional lumped parameter systems (LPS) is extended to DPS, which results in the spatio-temporal Wiener and Hammerstein systems and their identifi cation methods. Then, the traditional Volterra model is extended to DPS, which results in the spatio-temporal Volterra model and its identification algorithm. All these methods are based on linear time/space separation. Sometimes, the nonlinear time/space separation can play a better role in modeling of very complex processes. Thus, a nonlinear time/space separation based neural modeling is also presented for a class of DPS with more complicated dynamics. Finally, all these modeling approaches are successfully applied to industrial thermal processes, including a catalytic rod, a packed-bed reactor and a snap curing oven. The work is presented giving a unifi ed view from time/space separation. The book also illustrates applications to thermal processes in the electronics packaging and chemical industry. This volume assumes a basic knowledge about distributed parameter systems, system modeling and identifi cation. It is intended for researchers, graduate students and engineers interested in distributed parameter systems, nonlinear systems, and process modeling and control.
Download or read book Controller Design for Distributed Parameter Systems written by Kirsten A. Morris and published by Springer Nature. This book was released on 2020-06-01 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses controller and estimator design for systems that vary both spatially and in time: systems like fluid flow, acoustic noise and flexible structures. It includes coverage of the selection and placement of actuators and sensors for such distributed-parameter systems. The models for distributed parameter systems are coupled ordinary/partial differential equations. Approximations to the governing equations, often of very high order, are required and this complicates both controller design and optimization of the hardware locations. Control system and estimator performance depends not only on the controller/estimator design but also on the location of the hardware. In helping the reader choose the best location for actuators and sensors, the analysis provided in this book is crucial because neither intuition nor trial-and-error is foolproof, especially where multiple sensors and actuators are required, and moving hardware can be difficult and costly. The mechatronic approach advocated, in which controller design is integrated with actuator location, can lead to better performance without increased cost. Similarly, better estimation can be obtained with carefully placed sensors. The text shows how proper hardware placement varies depending on whether, disturbances are present, whether the response should be reduced to an initial condition or whether controllability and/or observability have to be optimized. This book is aimed at non-specialists interested in learning controller design for distributed-parameter systems and the material presented has been used for student teaching. The relevant basic systems theory is presented and followed by a description of controller synthesis using lumped approximations. Numerical algorithms useful for efficient implementation in real engineering systems and practical computational challenges are also described and discussed.
Download or read book Control Theory for Distributed Parameter Systems and Applications written by Franz Kappel and published by Springer. This book was released on 1983-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Conference on Control Theory for Distributed Parameter Systems, Held at the Chorherrenstift Vorau, Styria, July 11-17, 1982
Download or read book Modeling Estimation and Their Applications for Distributed Parameter Systems written by Y. Sawaragi and published by . This book was released on 2014-09-01 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Estimation and Their Applications for Distributed Parameter Systems written by Yoshikazu Sawaragi and published by Springer. This book was released on 1978 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Systems Modelling and Optimization Proceedings of the 18th IFIP TC7 Conference written by Michael P. Polis and published by Chapman and Hall/CRC. This book was released on 1999-02-02 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Top researchers in optimization and control from around the world gathered in Detroit for the 18th annual IFIP TC7 Conference on Systems Modelling and Optimization held in July 1997. The papers offered in this volume were selected from among the 250 plenary, invited, and contributed works presented at the conference. The editors chose these papers to represent the myriad and diverse range of topics within the field -in theory and applications-and to disseminate important new results. The editors have organized the book into seven sections: Distributed Parameter Systems Modelling Optimal Control and Nonsmoooth Analysis Automotive Optimization and Operations Research Applications · Reliability Each section contains important advances in theoretical development of optimization and control, new results, and discussions of applications. Treatment of numerous and wide- ranging applications-from turbulent flows, European option pricing, and storage location, to wear processes, passive fire protection, and robotics-make this resource important for academic and industrial researchers working in a variety of areas in systems engineering and applied mathematics.
Download or read book System Modelling and Optimization written by Masao Iri and published by Springer. This book was released on 1988 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Estimation Techniques for Distributed Parameter Systems written by H.T. Banks and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research detailed in this monograph was originally motivated by our interest in control problems involving partial and delay differential equations. Our attempts to apply control theory techniques to such prob lems in several areas of science convinced us that in the need for better and more detailed models of distributed/ continuum processes in biology and mechanics lay a rich, interesting, and challenging class of fundamen tal questions. These questions, which involve science and mathematics, are typical of those arising in inverse or parameter estimation problems. Our efforts on inverse problems for distributed parameter systems, which are infinite dimensional in the most common realizations, began about seven years ago at a time when rapid advances in computing capabilities and availability held promise for significant progress in the development of a practically useful as well as theoretically sound methodology for such problems. Much of the research reported in our presentation was not begun when we outlined the plans for this monograph some years ago. By publishing this monograph now, when only a part of the originally intended topics are covered (see Chapter VII in this respect), we hope to stimulate the research and interest of others in an area of scientific en deavor which has exceeded even our optimistic expectations with respect to excitement, opportunity, and stimulation. The computer revolution alluded to above and the development of new codes allow one to solve rather routinely certain estimation problems that would have been out of the question ten years ago.
Download or read book Control and Optimization of Multiscale Process Systems written by Panagiotis D. Christofides and published by Springer Science & Business Media. This book was released on 2008-10-28 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book—the first of its kind—presents general methods for feedback controller synthesis and optimization of multiscale systems, illustrating their application to thin-film growth, sputtering processes, and catalytic systems of industrial interest. The authors demonstrate the advantages of the methods presented for control and optimization through extensive simulations. Included in the work are new techniques for feedback controller design and optimization of multiscale process systems that are not included in other books. The book also contains a rich collection of new research topics and references to significant recent work.
Download or read book Applied and Numerical Partial Differential Equations written by W. Fitzgibbon and published by Springer Science & Business Media. This book was released on 2010-01-08 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standing at the intersection of mathematics and scientific computing, this collection of state-of-the-art papers in nonlinear PDEs examines their applications to subjects as diverse as dynamical systems, computational mechanics, and the mathematics of finance.
Download or read book Structural Modelling and Optimization written by D. G. Carmichael and published by . This book was released on 1981 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimal Measurement Methods for Distributed Parameter System Identification written by Dariusz Ucinski and published by CRC Press. This book was released on 2004-08-27 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: For dynamic distributed systems modeled by partial differential equations, existing methods of sensor location in parameter estimation experiments are either limited to one-dimensional spatial domains or require large investments in software systems. With the expense of scanning and moving sensors, optimal placement presents a critical problem.
Download or read book Topics in Identification and Distributed Parameter Systems written by Erhard Bühler and published by Springer-Verlag. This book was released on 2013-07-02 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Modelling and Simulation written by César de Prada and published by MDPI. This book was released on 2019-09-23 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since process models are nowadays ubiquitous in many applications, the challenges and alternatives related to their development, validation, and efficient use have become more apparent. In addition, the massive amounts of both offline and online data available today open the door for new applications and solutions. However, transforming data into useful models and information in the context of the process industry or of bio-systems requires specific approaches and considerations such as new modelling methodologies incorporating the complex, stochastic, hybrid and distributed nature of many processes in particular. The same can be said about the tools and software environments used to describe, code, and solve such models for their further exploitation. Going well beyond mere simulation tools, these advanced tools offer a software suite built around the models, facilitating tasks such as experiment design, parameter estimation, model initialization, validation, analysis, size reduction, discretization, optimization, distributed computation, co-simulation, etc. This Special Issue collects novel developments in these topics in order to address the challenges brought by the use of models in their different facets, and to reflect state of the art developments in methods, tools and industrial applications.
Download or read book Modeling Simulation and Optimization for Science and Technology written by William Fitzgibbon and published by Springer. This book was released on 2014-06-18 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains thirteen articles on advances in applied mathematics and computing methods for engineering problems. Six papers are on optimization methods and algorithms with emphasis on problems with multiple criteria; four articles are on numerical methods for applied problems modeled with nonlinear PDEs; two contributions are on abstract estimates for error analysis; finally one paper deals with rare events in the context of uncertainty quantification. Applications include aerospace, glaciology and nonlinear elasticity. Herein is a selection of contributions from speakers at two conferences on applied mathematics held in June 2012 at the University of Jyväskylä, Finland. The first conference, “Optimization and PDEs with Industrial Applications” celebrated the seventieth birthday of Professor Jacques Périaux of the University of Jyväskylä and Polytechnic University of Catalonia (Barcelona Tech) and the second conference, “Optimization and PDEs with Applications” celebrated the seventy-fifth birthday of Professor Roland Glowinski of the University of Houston. This work should be of interest to researchers and practitioners as well as advanced students or engineers in computational and applied mathematics or mechanics.
Download or read book Fractional Order Modeling of Dynamic Systems with Applications in Optimization Signal Processing and Control written by Ahmed G. Radwan and published by Academic Press. This book was released on 2021-10-22 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractional-order Modelling of Dynamic Systems with Applications in Optimization, Signal Processing and Control introduces applications from a design perspective, helping readers plan and design their own applications. The book includes the different techniques employed to design fractional-order systems/devices comprehensively and straightforwardly. Furthermore, mathematics is available in the literature on how to solve fractional-order calculus for system applications. This book introduces the mathematics that has been employed explicitly for fractional-order systems. It will prove an excellent material for students and scholars who want to quickly understand the field of fractional-order systems and contribute to its different domains and applications. Fractional-order systems are believed to play an essential role in our day-to-day activities. Therefore, several researchers around the globe endeavor to work in the different domains of fractional-order systems. The efforts include developing the mathematics to solve fractional-order calculus/systems and to achieve the feasible designs for various applications of fractional-order systems. - Presents a simple and comprehensive understanding of the field of fractional-order systems - Offers practical knowledge on the design of fractional-order systems for different applications - Exposes users to possible new applications for fractional-order systems
