Download or read book Modelling and Control of Organic Rankine Cycle Based Waste Heat Recovery Systems written by Jianhua Zhang and published by Butterworth-Heinemann. This book was released on 2017-11-01 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and Control of Organic Rankine Cycle Based Waste Heat Recovery Systems is a systematic study of modeling and control of ORC-based systems for waste heat recovery, bringing together rapidly developing research in this area. The organic Rankine cycle (ORC) is now commonly accepted as a viable technology to convert low grade heat in the thermal power plant, the diesel engine and the fuel cell. In response to limited reserves, increases in cost and the environmental impact of fossil fuels, the cumulative global capacity of ORC power systems for the conversion of renewable and waste thermal energy is undergoing rapid growth. Recovery utilization for low-grade heat energy has become one of the important energy-saving methods. In addition, technological advancements and cost reduction allow for competitive organic Rankine cycle machines on the market. Chapter 1 introduces the current status of organic Rankine cycle systems and reviews advances and challenges in organic Rankine cycle (ORC) systems modeling and control strategies. Chapter 2 presents the configuration of ORC power systems, analyzes the performance of ORC systems and summarizes their features, including both the operating modes and control objectives of ORC systems. Chapter 3 establishes the physical model for ORC power systems after building basic component models (evaporator, condenser, expander, receiver and pump). The model of an ORC power system is identified using input/output data. Chapter 4 designs controllers for ORC power systems operating on both, following electric power mode and waste heat mode respectively, using optimized set-points of controlled ORC power systems. Chapter 5 focuses on using simulation tools for building development systems that experimentally validate the physical model and control strategies of ORC power systems. Engineers and professionals, as well as recent graduates in the power generation industry will find this a valuable reference. Covers all of the topics related to both modeling and controller design for organic Rankine cycle systems Focuses on the approaches for creating mathematical models and controlling for the ORC systems Illustrates clearly the multi-disciplinary nature of the subject Includes an appendix of MATLAB/Simulink code for modeling and controlling ORC

Download or read book Organic Rankine Cycle ORC Power Systems written by Ennio Macchi and published by Woodhead Publishing. This book was released on 2016-08-24 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Rankine Cycle (ORC) Power Systems: Technologies and Applications provides a systematic and detailed description of organic Rankine cycle technologies and the way they are increasingly of interest for cost-effective sustainable energy generation. Popular applications include cogeneration from biomass and electricity generation from geothermal reservoirs and concentrating solar power installations, as well as waste heat recovery from gas turbines, internal combustion engines and medium- and low-temperature industrial processes. With hundreds of ORC power systems already in operation and the market growing at a fast pace, this is an active and engaging area of scientific research and technical development. The book is structured in three main parts: (i) Introduction to ORC Power Systems, Design and Optimization, (ii) ORC Plant Components, and (iii) Fields of Application. - Provides a thorough introduction to ORC power systems - Contains detailed chapters on ORC plant components - Includes a section focusing on ORC design and optimization - Reviews key applications of ORC technologies, including cogeneration from biomass, electricity generation from geothermal reservoirs and concentrating solar power installations, waste heat recovery from gas turbines, internal combustion engines and medium- and low-temperature industrial processes - Various chapters are authored by well-known specialists from Academia and ORC manufacturers

Download or read book Organic Rankine Cycle Technology for Heat Recovery written by Enhua Wang and published by BoD – Books on Demand. This book was released on 2018-11-07 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on organic Rankine cycle technology presents nine chapters on research activities covering the wide range of current issues on the organic Rankine cycle. The first section deals with working fluid selection and component design. The second section is related to dynamic modeling, starting from internal combustion engines to industrial power plants. The third section discusses industrial applications of waste heat recovery, including internal combustion engines, LNG, and waste water. A comprehensive analysis of the technology and application of organic Rankine cycle systems is beyond the aim of the book. However, the content of this volume can be useful for scientists and students to broaden their knowledge of technologies and applications of organic Rankine cycle systems.

Download or read book Organic Rankine Cycles for Waste Heat Recovery written by Silvia Lasala and published by BoD – Books on Demand. This book was released on 2020-05-13 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises five chapters on developed research activities on organic Rankine cycles. The first section aims to provide researchers with proper modelling (Chapter 1) and experimental (Chapter 2) tools to calculate and empirically validate thermophysical properties of ORC working fluids. The second section introduces some theoretical and experimental studies of organic Rankine cycles for waste heat recovery applications: a review of different supercritical ORC (Chapter 3), ORC for waste heat recovery from fossil-fired power plants (Chapter 4), the experimental detailed characterization of a small-scale ORC of 3 kW operating with either pure fluids or mixtures (Chapter 5).

Download or read book 14th International Conference on Turbochargers and Turbocharging written by Institution of Mechanical Engineers and published by CRC Press. This book was released on 2020-09-30 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: 14th International Conference on Turbochargers and Turbocharging addresses current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The contributions focus on the development of air management solutions and waste heat recovery ideas to support thermal propulsion systems leading to high thermal efficiency and low exhaust emissions. These can be in the form of internal combustion engines or other propulsion technologies (eg. Fuel cell) in both direct drive and hybridised configuration. 14th International Conference on Turbochargers and Turbocharging also provides a particular focus on turbochargers, superchargers, waste heat recovery turbines and related air managements components in both electrical and mechanical forms.

Download or read book Waste Heat Recovery in Process Industries written by Hussam Jouhara and published by John Wiley & Sons. This book was released on 2022-05-31 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore modern waste heat recovery technology across a variety of industries In Waste Heat Recovery in Process Industries, esteemed thermal engineer Hussam Jouhara delivers an organized and comprehensive exploration of waste heat recovery systems with a focus on industrial applications in different temperature ranges. The author describes various waste heat recovery systems, like heat exchangers, waste heat boilers, air preheaters, direct electrical conversion devices, and thermal storage. The book also offers discussions of the technologies and applications relevant to different temperature ranges present in industrial settings along with revealing case studies from various industries. Waste Heat Recovery in Process Industries examines a variety of industries, from steel to ceramics, chemicals, and food, and how plants operating in these sectors can use waste heat to improve their energy efficiency, reduce energy costs, and minimize their carbon footprint. The book also offers: A thorough introduction to waste heat recovery systems, including recuperative and regenerative burners, heat exchangers, waste heat boilers, air preheaters, and heat pumps Comprehensive explorations of low temperature applications, below 100°C, including advantages and drawbacks, as well as illustrative case studies Practical discussions of medium temperature applications, between 100°C and 400°C, including case studies In-depth examination of high temperature applications, above 400°C, including several case studies Perfect for chemical, mechanical, process, and power engineers, Waste Heat Recovery in Process Industries is also an ideal resource for professionals working in the chemical, metal processing, pharmaceutical, and food industries.

Download or read book Axial and Radial Turbines written by Hany Moustapha and published by Concepts Eti. This book was released on 2003 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineering Design and Analysis of Axlal and Radial Turbines.

Download or read book Thermodynamics In Nuclear Power Plant Systems written by Bahman Zohuri and published by Springer. This book was released on 2015-04-20 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of thermodynamics required to understand electrical power generation systems, honing in on the application of these principles to nuclear reactor power systems. It includes all the necessary information regarding the fundamental laws to gain a complete understanding and apply them specifically to the challenges of operating nuclear plants. Beginning with definitions of thermodynamic variables such as temperature, pressure and specific volume, the book then explains the laws in detail, focusing on pivotal concepts such as enthalpy and entropy, irreversibility, availability, and Maxwell relations. Specific applications of the fundamentals to Brayton and Rankine cycles for power generation are considered in-depth, in support of the book’s core goal- providing an examination of how the thermodynamic principles are applied to the design, operation and safety analysis of current and projected reactor systems. Detailed appendices cover metric and English system units and conversions, detailed steam and gas tables, heat transfer properties, and nuclear reactor system descriptions.

Download or read book The Role of Exergy in Energy and the Environment written by Sandro Nižetić and published by Springer. This book was released on 2018-07-30 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the analysis and applications of energy, exergy, and environmental issues in all sectors of the economy, including industrial processes, transportation, buildings, and services. Energy sources and technologies considered are hydrocarbons, wind and solar energy, fuel cells, as well as thermal and electrical storage. This book provides theoretical insights, along with state-of-the-art case studies and examples and will appeal to the academic community, but also to energy and environmental professionals and decision makers.

Download or read book Modeling Analysis and Optimization of Process and Energy Systems written by F. Carl Knopf and published by John Wiley & Sons. This book was released on 2011-12-14 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy costs impact the profitability of virtually all industrial processes. Stressing how plants use power, and how that power is actually generated, this book provides a clear and simple way to understand the energy usage in various processes, as well as methods for optimizing these processes using practical hands-on simulations and a unique approach that details solved problems utilizing actual plant data. Invaluable information offers a complete energy-saving approach essential for both the chemical and mechanical engineering curricula, as well as for practicing engineers.

Download or read book Handbook for the Montreal Protocol on Substances that Deplete the Ozone Layer written by and published by UNEP/Earthprint. This book was released on 2006 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Trends and Challenges in Maritime Energy Management written by Aykut I. Ölçer and published by Springer. This book was released on 2018-05-03 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of contemporary trends and challenges in maritime energy management (MEM). Coordinated action is necessary to achieve a low carbon and energy-efficient maritime future, and MEM is the prevailing framework aimed at reducing greenhouse gas emissions resulting from maritime industry activities. The book familiarizes readers with the status quo in the field, and paves the way for finding solutions to perceived challenges. The 34 contributions cover six important aspects: regulatory framework; energy-efficient ship design; energy efficient ship and port operation; economic and social dimensions; alternative fuels and wind-assisted ship propulsion; and marine renewable energy. This pioneering work is intended for researchers and academics as well as practitioners and policymakers involved in this important field.

Download or read book Exergy Energy System Analysis and Optimization Volume III written by Christos A. Frangopoulos and published by EOLSS Publications. This book was released on 2009-05-13 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exergy, Energy System Analysis, and Optimization theme is a component of the Encyclopedia of Energy Sciences, Engineering and Technology Resources which is part of the global Encyclopedia of Life Support Systems (EOLSS), an integrated compendium of twenty one Encyclopedias. These three volumes are organized into five different topics which represent the main scientific areas of the theme: 1. Exergy and Thermodynamic Analysis; 2. Thermoeconomic Analysis; 3. Modeling, Simulation and Optimization in Energy Systems; 4. Artificial Intelligence and Expert Systems in Energy Systems Analysis; 5. Sustainability Considerations in the Modeling of Energy Systems. Fundamentals and applications of characteristic methods are presented in these volumes. These three volumes are aimed at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book Optimization of Energy Systems written by Ibrahim Din¿er and published by John Wiley & Sons. This book was released on 2017-05-15 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential resource for optimizing energy systems to enhance design capability, performance and sustainability Optimization of Energy Systems comprehensively describes the thermodynamic modelling, analysis and optimization of numerous types of energy systems in various applications. It provides a new understanding of the system and the process of defining proper objective functions for determination of the most suitable design parameters for achieving enhanced efficiency, cost effectiveness and sustainability. Beginning with a general summary of thermodynamics, optimization techniques and optimization methods for thermal components, the book goes on to describe how to determine the most appropriate design parameters for more complex energy systems using various optimization methods. The results of each chapter provide potential tools for design, analysis, performance improvement, and greenhouse gas emissions reduction. Key features: Comprehensive coverage of the modelling, analysis and optimization of many energy systems for a variety of applications. Examples, practical applications and case studies to put theory into practice. Study problems at the end of each chapter that foster critical thinking and skill development. Written in an easy-to-follow style, starting with simple systems and moving to advanced energy systems and their complexities. A unique resource for understanding cutting-edge research in the thermodynamic analysis and optimization of a wide range of energy systems, Optimization of Energy Systems is suitable for graduate and senior undergraduate students, researchers, engineers, practitioners, and scientists in the area of energy systems.

Download or read book Artificial Intelligence and Industrial Applications written by Tawfik Masrour and published by Springer Nature. This book was released on 2020-07-18 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers from Artificial Intelligence and Industrial Applications (A2IA’2020), the first installment of an annual international conference organized by ENSAM-Meknes at Moulay Ismail University, Morocco. The 29 papers presented here were carefully reviewed and selected from 141 submissions by an international scientific committee. They address various aspects of artificial intelligence such as digital twin, multiagent systems, deep learning, image processing and analysis, control, prediction, modeling, optimization and design, as well as AI applications in industry, health, energy, agriculture, and education. The book is intended for AI experts, offering them a valuable overview and global outlook for the future, and highlights a wealth of innovative ideas and recent, important advances in AI applications, both of a foundational and practical nature. It will also appeal to non-experts who are curious about this timely and important subject.

Download or read book Product Design written by Catalin Alexandru and published by BoD – Books on Demand. This book was released on 2020-10-28 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Product design is a comprehensive process related to the creation of new products, and the ability to design and develop efficient products are key to success in today’s dynamic global market. Written by experts in the field, this book provides a comprehensive overview of the product design process and its applications in various fields, particularly engineering. Over seven chapters, the authors explore such topics as development of new product design methodologies, implementation of effective methods for integrated products, development of more visualized environments for task-based conceptual design methods, and development of engineering design tools based on 3D photogrammetry, among others.

Download or read book Energy Solutions to Combat Global Warming written by XinRong Zhang and published by Springer. This book was released on 2016-10-17 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers an in-depth collection of 45 selected papers presented at the Global Conference on Global Warming 2014 in Beijing, China, covering a broad variety of topics from the main principles of thermodynamics and their role in design, analysis, and the improvements in performance of energy systems to the potential impact of global warming on human health and wellbeing. Given energy production’s role in contributing to global warming and climate change, this work provides solutions to global warming from the point of view of energy. Incorporating multi-disciplinary expertise and approaches, it provides a platform for the analysis of new developments in the area of global warming and climate change, as well as potential energy solutions including renewable energy, energy efficiency, energy storage, hydrogen production, CO2 capture and environmental impact assessment. The research and analysis presented herein will benefit international scientists, researchers, engineers, policymakers and all others with an interest in global warming and its potential solutions.