Download or read book Modeling Verification and Optimization of Hybrid Ground Source Heat Pump Systems in Energyplus written by Sankaranarayanan Padhmanabhan and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling Simulation and Optimization of Ground Source Heat Pump Systems written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ground Source Heat Pump Systems for Renewable Heating and Cooling written by Saeid Mohammadzadeh Bina and published by Elsevier. This book was released on 2023-09-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground Source Heat Pump Systems for Renewable Heating and Cooling: Design, Numerical Modeling, and Optimization presents a comprehensive account of GSHP systems and their potential for renewable heating and cooling, based on the unique case studies carried out by Akita University since 2014.This book covers all aspects of ground source heat pump (GSHP) systems for meeting the heating and cooling demands of energy-efficient buildings across the world. With access to critical data and experimental results across countries from Japan to Canada, including both vertical and horizontal grounds heat exchangers, this book aims to gather the latest steps and best practices for utilization.Practical elements include maps, installations, field measurements, and numerical modeling using the experience of researchers in Japan. Bringing these tools together, the chapters offer solutions to the many challenges of these systems including feasibility studies, optimum well depths, unbalanced heating and cooling demands, and hybrid systems.

Download or read book Advances in Ground Source Heat Pump Systems written by Simon Rees and published by Woodhead Publishing. This book was released on 2016-05-13 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Ground-Source Heat Pump Systems relates the latest information on source heat pumps (GSHPs), the types of heating and/or cooling systems that transfer heat from, or to, the ground, or, less commonly, a body of water. As one of the fastest growing renewable energy technologies, they are amongst the most energy efficient systems for space heating, cooling, and hot water production, with significant potential for a reduction in building carbon emissions. The book provides an authoritative overview of developments in closed loop GSHP systems, surface water, open loop systems, and related thermal energy storage systems, addressing the different technologies and component methods of analysis and optimization, among other subjects. Chapters on building integration and hybrid systems complete the volume. - Provides the geological aspects and building integration covered together in one convenient volume - Includes chapters on hybrid systems - Presents carefully selected chapters that cover areas in which there is significant ongoing research - Addresses geothermal heat pumps in both heating and cooling modes

Download or read book Development and Verification of Simulation Model of Hybrid Ground coupled Heat Pump Systems with Inclined Boreholes written by Ping Cui and published by . This book was released on 2008 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Simulation and Validation of Hybrid Ground Source and Water loop Heat Pump Systems written by Jason Earl Gentry and published by . This book was released on 2007 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Findings and conclusions. The predicted HGSHP system simulation matched very well to experimental results when each component was calibrated. From the designers' perspective, the performance of the system simulation with all models relying only on manufacturers' data was quite good and should be acceptable for design purposes.

Download or read book Dynamic Modeling and Control of Hybrid Ground Source Heat Pump Systems written by Chang Chen and published by . This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground source heat pump (GSHP) systems are one of the fastest growing applications of renewable energy in the world with annual increases of 10% over the past decade. GSHPs are potentially more efficient than conventional air-to-air heat pumps as they use the relatively constant temperature of the geothermal energy to provide heating or cooling to conditioned rooms at desired temperature and relative humidity. More importantly, GSHP systems can in fact achieve significant energy savings year round, compared to conventional HVAC systems. A hybrid ground source heat pump (HGSHP) system is designed in this study to heat and cool an office building all the year round. Dynamic models of each component of the heat pump system are developed for simulations of heat transfer between each component of the HGSHP system and for control strategy design and analysis. A detailed multiple-load aggregation algorithm (MLAA) is adapted from the literature to precisely account for and calculate the transient heat conduction in vertical ground heat exchangers with different yearly, monthly, and daily pulses of heat. Feedback PI controllers for heat pump units and On/Off controllers for boiler and cooling tower are designed and utilized to match anticipated building loads and to analyze transient response characteristics of such outputs as water flow rate and air flow rate of heat pumps, return water temperature and supply air temperature of heat pumps, water temperatures of ground loops and heat exchangers, water temperature of boiler or cooling tower, and fuel flow rate of boiler. Control strategies for the HGSHP system in both heating and cooling modes of operation are also introduced to study the system responses. With the usage of On/Off controllers and well-tuned PI controllers, as well as optimal control strategies for heating and cooling operations, the HGSHP system is expected to give better operating performance and efficiency. As a result, noticeable energy savings can be achieved in both heating and cooling modes of operation.

Download or read book Ground Source Heat Pumps written by Ioan Sarbu and published by Academic Press. This book was released on 2015-10-01 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground-Source Heat Pumps presents the theory and some of the most recent advances of GSHPs and their implementation in the heating/cooling system of buildings. The authors explore the thermodynamic cycle with calculation, operation regimes and economic indicators and GHG emissions of a vapor compression heat pump. They go on to examine substitution strategies of non-ecological refrigerants and types of compressors and heat pumps, before delving into the different GSHP systems, as well as their compared economic, energy and environmental performances using classical and optimized adjustment for various operating modes. Surface water heat pumps and ground water heat pumps are covered, and special focus is given to both vertical and horizontal ground-coupled heat pump systems, for which modelling and simulation is discussed, and experimental systems are described. Due to its advanced approach to the subject, this book will be especially valuable for researchers, graduate students and academics, and as reference for engineers and specialists in the varied domains of building services. Explores fundamentals and state-of-the-art research, including ground-coupled heat pump (GCHP) systems. Includes performance assessment and comparison for different types of GSHP, numerical simulation models, practical applications of GSHPs with details on the renewable energy integration, information on refrigerants, and economic analysis.

Download or read book Foundation Heat Exchanger Final Report written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal heat pumps, sometimes called ground-source heat pumps (GSHPs), have been proven capable of significantly reducing energy use and peak demand in buildings. Conventional equipment for controlling the temperature and humidity of a building, or supplying hot water and fresh outdoor air, must exchange energy (or heat) with the building's outdoor environment. Equipment using the ground as a heat source and heat sink consumes less non-renewable energy (electricity and fossil fuels) because the earth is cooler than outdoor air in summer and warmer in winter. The most important barrier to rapid growth of the GSHP industry is high first cost of GSHP systems to consumers. The most common GSHP system utilizes a closed-loop ground heat exchanger. This type of GSHP system can be used almost anywhere. There is reason to believe that reducing the cost of closed-loop systems is the strategy that would achieve the greatest energy savings with GSHP technology. The cost premium of closed-loop GSHP systems over conventional space conditioning and water heating systems is primarily associated with drilling boreholes or excavating trenches, installing vertical or horizontal ground heat exchangers, and backfilling the excavations. This project investigates reducing the cost of horizontal closed-loop ground heat exchangers by installing them in the construction excavations, augmented when necessary with additional trenches. This approach applies only to new construction of residential and light commercial buildings or additions to such buildings. In the business-as-usual scenario, construction excavations are not used for the horizontal ground heat exchanger (HGHX); instead the HGHX is installed entirely in trenches dug specifically for that purpose. The potential cost savings comes from using the construction excavations for the installation of ground heat exchangers, thereby minimizing the need and expense of digging additional trenches. The term foundation heat exchanger (FHX) has been coined to refer exclusively to ground heat exchangers installed in the overcut around the basement walls. The primary technical challenge undertaken by this project was the development and validation of energy performance models and design tools for FHX. In terms of performance modeling and design, ground heat exchangers in other construction excavations (e.g., utility trenches) are no different from conventional HGHX, and models and design tools for HGHX already exist. This project successfully developed and validated energy performance models and design tools so that FHX or hybrid FHX/HGHX systems can be engineered with confidence, enabling this technology to be applied in residential and light commercial buildings. The validated energy performance model also addresses and solves another problem, the longstanding inadequacy in the way ground-building thermal interaction is represented in building energy models, whether or not there is a ground heat exchanger nearby. Two side-by-side, three-level, unoccupied research houses with walkout basements, identical 3,700 ft2 floor plans, and hybrid FHX/HGHX systems were constructed to provide validation data sets for the energy performance model and design tool. The envelopes of both houses are very energy efficient and airtight, and the HERS ratings of the homes are 44 and 45 respectively. Both houses are mechanically ventilated with energy recovery ventilators, with space conditioning provided by water-to-air heat pumps with 2 ton nominal capacities. Separate water-to-water heat pumps with 1.5 ton nominal capacities were used for water heating. In these unoccupied research houses, human impact on energy use (hot water draw, etc.) is simulated to match the national average. At House 1 the hybrid FHX/HGHX system was installed in 300 linear feet of excavation, and 60% of that was construction excavation (needed to construct the home). At House 2 the hybrid FHX/HGHX system was installed in 360 feet of excavation, 50% of which was construction excavation. There are six pipes in all excavations (three parallel circuits - out and back), and the multiple instances of FHX and/or HGHX are all connected in series. The working fluid is 20% by weight propylene glycol in water. Model and design tool development was undertaken in parallel with constructing the houses, installing instrumentation, and monitoring performance for a year. Several detailed numerical models for FHX were developed as part of the project. Essentially the project team was searching for an energy performance model accurate enough to achieve project objectives while also having sufficient computational efficiency for practical use in EnergyPlus. A 3-dimensional, dual-coordinate-system, finite-volume model satisfied these criteria and was included in the October 2011 EnergyPlus Version 7 public release after being validated against measured data.

Download or read book Optimizing the Operation of a Hybrid Ground Source Heat Pump System Under Uncertainty written by Hansani Weeratunge and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid renewable energy systems that combine conventional heating, ventilation, and air conditioning (HVAC) systems and ground source heat pumps (GSHP) have become an attractive alternative for conventional HVAC systems due to their higher cost and energy efficiency.Furthermore, control strategies that exploit predictive information about weather and building occupants' activity can further reduce the system operating costs. This study proposes a Stochastic Model Predictive Control (SMPC) for hybrid GSHP systems considering the stochastic nature of the building space heating demand. In SMPC, near-optimal control decisions are found for the current and future states of the system through the application of Regression Monte-Carlo techniques. We compare the performance of SMPC to that gained by using setpoint Control (SPC) and Model Predictive Control (MPC) which uses a deterministic forecast. It is found that by taking uncertainty into account via SMPC, the operating cost reduction compared to SPC is approximately equal to half of the cost-optimality gap between SPC and an idealized controller that is represented by MPC with perfect future information. Furthermore, we find that MPC using a forecast based on expected values leads to greater operating costs compared to the simpler SPC strategy when variability and uncertainty are present.

Download or read book Simulation and Optimal Control of Hybrid Ground Source Heat Pump Systems written by Xiaowei Xu and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Simulation and Design of Hybrid Geothermal Heat Pump Systems written by Andrew D. Chiasson and published by ProQuest. This book was released on 2007 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Development of Numerical Models of Vertical Ground Heat Exchangers and Experimental Verification written by Eui-Jong Kim and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground-source heat pump systems with vertical ground heat exchangers (GHE) are gaining popularity worldwide for their higher coefficients of performance and lower CO2 emissions. However, the higher initial cost of installing the borehole GHEs is a main obstacle to spread the systems. To reduce the required total GHE length and efficiently operate the systems, various systems such as hybrid ones (e.g. solar heat injection) have recently been introduced. Accurate prediction of heat transfer in and around boreholes of such systems is crucial to avoid costly overdesigns or catastrophic failures of undersized systems as it is for typical GCHP systems. However, unlike the traditional sizing methods, it is increasingly required to take into account detailed borehole configuration and transient effects (e.g. short circuit effects between U-tubes). Many of the existing GHE models have been reviewed. Some of these models have serious limitations when it comes to transient heat transfer, particularly in the borehole itself. Accordingly, the objective of this thesis is to develop a model that is capable to accurately predict thermal behaviors of the GHEs. A precise response to input variations even in a short time-step is also expected in the model. The model also has to account for a correct temperature and flux distribution between the U-tubes and inside the borehole that seems to be important in the solar heat injection case. Considering these effects in 3D with a detailed mesh used for describing the borehole configurations is normally time-consuming. This thesis attempts to alleviate the calculation time using state model reduction techniques that use fewer modes for a fast calculation but predict similar results. Domain decomposition is also envisaged to sub-structure the domain and vary the time-step sizes. Since the decomposed domains should be coupled one another spatially as well as temporally, new coupling methods are proposed and validated particularly in the FEM. For the simulation purpose, a hybrid model (HM) is developed that combines a numerical solution, the same one as the 3D-RM but only for the borehole, and well-known analytical ones for a fast calculation. An experimental facility used for validation of the model has been built and is described. A comparison with the experimental results shows that the relatively fast transients occurring in the borehole are well predicted not only for the outlet fluid temperature but also for the grout temperatures at different depths even in very short time-steps. Even though the current version of 3D-RM is experimentally validated, it is still worth optimizing the model in terms of the computational time. Further simulations with the 3D-RM are expected to be carried out to estimate the performance of new hybrid systems and propose its appropriate sizing with correspondent thermal impacts on the ground. Finally, the development of the model 3D-RM can be an initiation to accurately model various types of GHE within an acceptable calculation time.

Download or read book Simulation and Experimental Verification of Vertical Ground coupled Heat Pump Systems written by Stephen Paul Kavanaugh and published by . This book was released on 1985 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optimal Ground Source Heat Pump System Design written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the facts that GSHPs first gained popularity as early as the 1940's and they can achieve 30 to 60 percent in energy savings and carbon emission reductions relative to conventional HVAC systems, the use of geothermal energy in the U.S. has been less than 1 percent of the total energy consumption. The key barriers preventing this technically-mature technology from reaching its full commercial potential have been its high installation cost and limited consumer knowledge and trust in GSHP systems to deliver the technology in a cost-effective manner in the market place. Led by ENVIRON, with support from University Hartford and University of Vermont, the team developed and tested a software-based a decision making tool ('OptGSHP') for the least-cost design of ground-source heat pump ('GSHP') systems. OptGSHP combines state of the art optimization algorithms with GSHP-specific HVAC and groundwater flow and heat transport simulation. The particular strength of OptGSHP is in integrating heat transport due to groundwater flow into the design, which most of the GSHP designs do not get credit for and therefore are overdesigned.

Download or read book Recovery Act Development of Design and Simulation Tool for Hybrid Geothermal Heat Pump System written by and published by . This book was released on 2014 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ground source heat pump (GSHP) system is one of the most energy efficient HVAC technologies in the current market. However, the heat imbalance may degrade the ability of the ground loop heat exchanger (GLHX) to absorb or reject heat. The hybrid GSHP system, which combines a geothermal well field with a supplemental boiler or cooling tower, can balance the loads imposed on the ground loop heat exchangers to minimize its size while retaining superior energy efficiency. This paper presents a recent simulation-based study with an intention to compare multiple common control strategies used in hybrid GSHP systems, including fixed setpoint, outside air reset, load reset, and wetbulb reset. A small office in Oklahoma City conditioned by a hybrid GSHP system was simulated with the latest version of eQUEST 3.7[1]. The simulation results reveal that the hybrid GSHP system has the excellent capability to meet the cooling and heating setpoints during the occupied hours, balance thermal loads on the ground loop, as well as improve the thermal comfort of the occupants with the undersized well field.

Download or read book Fundamentals of Geothermal Heat Pump Systems written by Louis Lamarche and published by Springer. This book was released on 2023-10-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Geothermal Heat Pump Systems: Design and Application is written for upper-level undergraduate and graduate courses in renewable energy and heat transfer. This classroom-tested text covers ground heat exchanger modeling, secondary loop ground-source system design, pumping energy, thermal response testing, commercial building applications, and horizontal and groundwater ground heat exchangers. The book is oriented to practical applications, including the economic analysis of ground source heat pump (GSHP) systems, but more theoretical sections are provided covering research-related geothermal applications. Chapters on heat transfer fundamentals and heat pump concepts are included for readers less familiar with thermal engineering concepts. A chapter covering the economic analysis of GSHP systems is also included. All of the examples and problems in the book are solved using the open-source Python programming language. The book will provide students in geothermal energy courses with a solid understanding of the subject. It will also be a valuable reference for professionals working in the field of renewable energy.