Download or read book Modeling the Mechanical Behavior of Aluminum Laminated Metal Composites During High Temperature Deformation written by and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A constitutive model for deformation of a novel laminated metal composite (LMC) which is comprised of 21 alternating layers of Al 5182 alloy and Al 6090/SiC/25p metal matrix composite (MMC) has been proposed. The LMC as well as the constituent or neat structures have been deformed in uniaxial tension within a broad range of strain rates (i.e. 10(exp-6) to 10/s) and moderate to high homologous temperatures (i.e. 0.3>= 0.95 Tm). The LMC structure exhibits a behavior somewhat closer to the MMC layers. The results of these experiments have lead to a thorough characterization of the neat layer's mechanical behavior and a subsequent semi-empirical constitutive rate equation for both the Al 5182 and Al 6O9O/SiC/25p. These predictive relations for the neat layers have been coupled with a proposed model for deformation. This deformation model has led to the development of a constitutive relationship between flow stress and applied strain rate for the laminated structure which has been compared with experimental data.

Download or read book Carbon Nanotubes written by Andy Nieto and published by CRC Press. This book was released on 2021-05-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This discovery of carbon nanotubes (CNT) three decades ago ushered in the technological era of nanotechnology. Among the most widely studied areas of CNT research is their use as structural reinforcements in composites. This book describes the development of CNT reinforced metal matrix composites (CNT-MMCs) over the last two decades. The field of CNT-MMCs is abundant in fundamental science, rich in engineering challenges and innovations and ripe for technological maturation and commercialization. The authors have sought to present the current state of the-art in CNT-MMC technology from their synthesis to their myriad potential end-use applications. Specifically, topics explored include: • Advantages, limitations, and evolution of processing techniques used to synthesize and fabricate CNT-MMCs • Emphasizes dispersion techniques of CNTs in metallic systems, a key challenge to the successful and widespread implementation of CNT-MMCs. Methods for quantification and improved control of CNT distributions are presented • Methods for quantification and improved control of CNT distributions are presented • Characterization techniques uniquely suited for charactering these nanoscale materials and their many chemical and physical interactions with the metal matrix, including real-time in-situ characterization of deformation mechanisms • Electron microscope images from premier studies enrich discussions on micro-mechanical modeling, interfacial design, mechanical behavior, and functional properties • A chapter is dedicated to the emergence of dual reinforcement composites that seek to enhance the efficacy of CNTs and lead to material properties by design This book highlights seminal findings in CNT-MMC research and includes several tables listing processing methods, associated CNT states, and resulting properties in order to aid the next generation of researchers in advancing the science and engineering of CNT-MMCs. In addition, a survey of the patent literature is presented in order to shed light on what the first wave of CNT-MMC commercialization may look like and the challenges that will have to be overcome, both technologically and commercially.

Download or read book Thermal and Mechanical Behavior of Metal Matrix and Ceramic Matrix Composites written by John M. Kennedy and published by ASTM International. This book was released on 1990 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of interest to researchers and practitioners in materials science, especially in the aerospace industry, 16 papers from a symposium in Atlanta, Georgia, November 1988 discuss the analysis, modeling, and behavior of both continuous and discontinuous ceramic and metal matrix composites, and methods of

Download or read book Mechanical Behavior of Aluminum Stainless Steel Composites Subjected to Elevated Temperature Exposure written by A. Pattnaik and published by . This book was released on 1971 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Room temperature tensile behavior to failure is correlated with associated intereface microstructure, matrix substructure, and fracture morphology in aluminum-stainless steel composites (Vf = 6.5%.19.6%) in the as-pressed condition and after exposure at temperatures of 550C or 625C. Heat-treatment at either temperature does not affect stages I and II of the stress-strain curve but does reduce the ultimate tensile strength; strain to failure is not impared after the 550C heat-treatment but is significantly lower following heat-treatment at 625C. These observations are consistent with the observed fracture morphology of composites and wires pulled to failure after extraction from the composites. A 'corn-cob' structure develops on the wire surface at each temperature; ductile behavior of the wires is confirmed after heat-treatment at 550C but not after heat-treatment at the higher temperatures. Reduction in strength is attributed to the development of a brittle interfacial zone. Composite tensile strengths in the three conditions are in reasonable agreement with rule-of-mixtures predictions using measured strength levels for the extracted wires in the calculation. In each condition, a dislocation cell structure develops in stage III with the cell size relatively independent of distance from the matrix-wire interface; the cell structure is comparable to that formed in unreinforced aluminum at comparable levels of strain. (Author).

Download or read book Metal Matrix Composites written by Minoru Taya and published by Elsevier. This book was released on 2016-01-11 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Matrix Composites: Thermomechanical Behavior discusses metal matrix composites, elaborating on that consists of two phases—fiber as reinforcement and metal as matrix. This book focuses on polymer matrix composites, including topics in metal matrix composites ranging from processing to fracture mechanics. The three basic types of composite materials—dispersion-strengthened, particle-reinforced, and fiber (whisker)-reinforced, are also described in detail. Dispersion-strengthened is characterized by a microstructure consisting of an elemental matrix within which fine particles are uniformly dispersed, while particle-reinforced is indicated by dispersed particles of greater than 1.0 μm diameter with a volume fraction of 5 to 40%. Fiber (whisker)-reinforced provides a distinguishing microstructural feature of fiber-reinforced materials, such as that the reinforcing fiber has one long dimension, while the reinforcing particles of the other two types do not. This publication serves as a reference data book to students and researchers aiming to acquire knowledge of the thermomechanical behavior of metal matrix composites.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 36 (thesis year 1991) a total of 11,024 thesis titles from 23 Canadian and 161 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 36 reports theses submitted in 1991, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2016-04-19 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differenti

Download or read book NASA Technical Memorandum written by and published by . This book was released on 1988 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engine Structures written by and published by . This book was released on 1988 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hot Deformation of Aluminum Alloys II written by Thomas R. Bieler and published by Minerals, Metals, & Materials Society. This book was released on 1998 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: These symposium proceedings from the 1998 TMS Fall Meeting examine the relationships between mechanical behavior and microstructural evolution that must be quantified to develop predictive models for hot deformation. Issues addressed include constitutive modeling; process design and modeling; laboratory simulation of large scale hot working processes; the evolution of microstructure; texture, damage, dynamic precipitation, recovery, and recrystallization processes; creep and superplastic deformation; and the ability to predict phenomena such as corrosion and formability after hot deformation.

Download or read book Mechanical Behavior of an Aluminum silicon Carbide Metal Matrix Composite Under Plane Stress plane Strain Deformation Field written by Francisco J. Irizarry Lago and published by . This book was released on 1995 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Japanese Science and Technology written by and published by . This book was released on 1986 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metals Abstracts Index written by and published by . This book was released on 1995 with total page 1390 pages. Available in PDF, EPUB and Kindle. Book excerpt: