Download or read book Ionized Physical Vapor Deposition written by and published by Academic Press. This book was released on 1999-10-14 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides the first comprehensive look at a pivotal new technology in integrated circuit fabrication. For some time researchers have sought alternate processes for interconnecting the millions of transistors on each chip because conventional physical vapor deposition can no longer meet the specifications of today's complex integrated circuits. Out of this research, ionized physical vapor deposition has emerged as a premier technology for the deposition of thin metal films that form the dense interconnect wiring on state-of-the-art microprocessors and memory chips.For the first time, the most recent developments in thin film deposition using ionized physical vapor deposition (I-PVD) are presented in a single coherent source. Readers will find detailed descriptions of relevant plasma source technology, specific deposition systems, and process recipes. The tools and processes covered include DC hollow cathode magnetrons, RF inductively coupled plasmas, and microwave plasmas that are used for depositing technologically important materials such as copper, tantalum, titanium, TiN, and aluminum. In addition, this volume describes the important physical processes that occur in I-PVD in a simple and concise way. The physical descriptions are followed by experimentally-verified numerical models that provide in-depth insight into the design and operation I-PVD tools.Practicing process engineers, research and development scientists, and students will find that this book's integration of tool design, process development, and fundamental physical models make it an indispensable reference.Key Features:The first comprehensive volume on ionized physical vapor depositionCombines tool design, process development, and fundamental physical understanding to form a complete picture of I-PVDEmphasizes practical applications in the area of IC fabrication and interconnect technologyServes as a guide to select the most appropriate technology for any deposition application*This single source saves time and effort by including comprehensive information at one's finger tips*The integration of tool design, process development, and fundamental physics allows the reader to quickly understand all of the issues important to I-PVD*The numerous practical applications assist the working engineer to select and refine thin film processes

Download or read book Handbook of Physical Vapor Deposition PVD Processing written by D. M. Mattox and published by Cambridge University Press. This book was released on 2014-09-19 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all aspects of physical vapor deposition (PVD) process technology from the characterizing and preparing the substrate material, through deposition processing and film characterization, to post-deposition processing. The emphasis of the book is on the aspects of the process flow that are critical to economical deposition of films that can meet the required performance specifications. The book covers subjects seldom treated in the literature: substrate characterization, adhesion, cleaning and the processing. The book also covers the widely discussed subjects of vacuum technology and the fundamentals of individual deposition processes. However, the author uniquely relates these topics to the practical issues that arise in PVD processing, such as contamination control and film growth effects, which are also rarely discussed in the literature. In bringing these subjects together in one book, the reader can understand the interrelationship between various aspects of the film deposition processing and the resulting film properties. The author draws upon his long experience with developing PVD processes and troubleshooting the processes in the manufacturing environment, to provide useful hints for not only avoiding problems, but also for solving problems when they arise. He uses actual experiences, called ""war stories"", to emphasize certain points. Special formatting of the text allows a reader who is already knowledgeable in the subject to scan through a section and find discussions that are of particular interest. The author has tried to make the subject index as useful as possible so that the reader can rapidly go to sections of particular interest. Extensive references allow the reader to pursue subjects in greater detail if desired. The book is intended to be both an introduction for those who are new to the field and a valuable resource to those already in the field. The discussion of transferring technology between R&D and manufacturing provided in Appendix 1, will be of special interest to the manager or engineer responsible for moving a PVD product and process from R&D into production. Appendix 2 has an extensive listing of periodical publications and professional societies that relate to PVD processing. The extensive Glossary of Terms and Acronyms provided in Appendix 3 will be of particular use to students and to those not fully conversant with the terminology of PVD processing or with the English language.

Download or read book Proceedings written by and published by . This book was released on 1996 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Power Impulse Magnetron Sputtering written by Daniel Lundin and published by Elsevier. This book was released on 2019-08-30 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Power Impulse Magnetron Sputtering: Fundamentals, Technologies, Challenges and Applications is an in-depth introduction to HiPIMS that emphasizes how this novel sputtering technique differs from conventional magnetron processes in terms of both discharge physics and the resulting thin film characteristics. Ionization of sputtered atoms is discussed in detail for various target materials. In addition, the role of self-sputtering, secondary electron emission and the importance of controlling the process gas dynamics, both inert and reactive gases, are examined in detail with an aim to generate stable HiPIMS processes. Lastly, the book also looks at how to characterize the HiPIMS discharge, including essential diagnostic equipment. Experimental results and simulations based on industrially relevant material systems are used to illustrate mechanisms controlling nucleation kinetics, column formation and microstructure evolution.

Download or read book Handbook of Deposition Technologies for Films and Coatings written by Peter M. Martin and published by William Andrew. This book was released on 2009-12-01 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.

Download or read book Cathodic Arcs written by André Anders and published by Springer Science & Business Media. This book was released on 2009-07-30 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cathodic arcs are among the longest studied yet least understood objects in science. Plasma-generating, tiny spots appear on the cathode; they are highly dynamic and hard to control. With an approach emphasizing the fractal character of cathode spots, strongly fluctuating plasma properties are described such as the presence of multiply charged ions that move with supersonic velocity. Richly illustrated, the book also deals with practical issues, such as arc source construction, macroparticle removal, and the synthesis of dense, well adherent coatings. The book spans a bridge from plasma physics to coatings technology based on energetic condensation, appealing to scientists, practitioners and graduate students alike.

Download or read book Principles of Vapor Deposition of Thin Films written by Professor K.S. K.S Sree Harsha and published by Elsevier. This book was released on 2005-12-16 with total page 1173 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of producing devices that are smaller, faster, more functional, reproducible, reliable and economical has given thin film processing a unique role in technology.Principles of Vapor Deposition of Thin Films brings in to one place a diverse amount of scientific background that is considered essential to become knowledgeable in thin film depostition techniques. Its ultimate goal as a reference is to provide the foundation upon which thin film science and technological innovation are possible.* Offers detailed derivation of important formulae.* Thoroughly covers the basic principles of materials science that are important to any thin film preparation.* Careful attention to terminologies, concepts and definitions, as well as abundance of illustrations offer clear support for the text.

Download or read book Atomic Layer Deposition for Semiconductors written by Cheol Seong Hwang and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering thorough coverage of atomic layer deposition (ALD), this book moves from basic chemistry of ALD and modeling of processes to examine ALD in memory, logic devices and machines. Reviews history, operating principles and ALD processes for each device.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2000 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Electric Propulsion written by Dan M. Goebel and published by John Wiley & Sons. This book was released on 2008-12-22 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout most of the twentieth century, electric propulsion was considered the technology of the future. Now, the future has arrived. This important new book explains the fundamentals of electric propulsion for spacecraft and describes in detail the physics and characteristics of the two major electric thrusters in use today, ion and Hall thrusters. The authors provide an introduction to plasma physics in order to allow readers to understand the models and derivations used in determining electric thruster performance. They then go on to present detailed explanations of: Thruster principles Ion thruster plasma generators and accelerator grids Hollow cathodes Hall thrusters Ion and Hall thruster plumes Flight ion and Hall thrusters Based largely on research and development performed at the Jet Propulsion Laboratory (JPL) and complemented with scores of tables, figures, homework problems, and references, Fundamentals of Electric Propulsion: Ion and Hall Thrusters is an indispensable textbook for advanced undergraduate and graduate students who are preparing to enter the aerospace industry. It also serves as an equally valuable resource for professional engineers already at work in the field.

Download or read book Advanced Techniques for Surface Engineering written by W. Gissler and published by Springer Science & Business Media. This book was released on 1992-10-31 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The hardest requirements on a material are in general imposed at the surface: it has to be wear resistant for tools and bearings; corrosion resistant for turbine blades; antireflecting for solar cells; and it must combine several of these properties in other applications. `Surface engineering' is the general term that incorporates all the techniques by which a surface modification can be accomplished. These techniques include both the more traditional methods, such as nitriding, boriding and carburizing, and the newer ones, such as ion implantation, laser beam melting and, in particular, coating. This book comprises and compares in a unique way all these techniques of surface engineering. It is a compilation of lectures which were held by renowned scientists and engineers in the frame of the well known `EuroCourses' of the Joint Research Centre of the Commission of the European Communities. The book is principally addressed to material and surface scientists, physicists and chemists, engineers and technicians of industries and institutes where surface engineering problems arise.

Download or read book Advanced Plasma Technology written by Riccardo d'Agostino and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: A panel of internationally renowned scientists discuss the latest results in plasma technology. This volume has been compiled with both a didactic approach and an overview of the newest achievements for industrial applications. It is divided into two main sections. One is focused on fundamental technology, including plasma production and control, high-pressure discharges, modeling and simulation, diagnostics, dust control, and etching. The section on application technology covers polymer treatments, silicon solar cell, coating and spray, biomaterials, sterilization and waste treatment, plasma propulsion, plasma display panels, and anti-corrosion coatings. The result is an indispensable work for physicists, chemists and engineers involved in the field of plasma technology.

Download or read book Physical vapor deposition and thermal stability of hard oxide coatings written by Ludvig Landälv and published by Linköping University Electronic Press. This book was released on 2019-04-26 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: The state-of-the-art tools for machining metals are primarily based on a metal-ceramic composite (WC-Co) coated with different combinations of carbide, nitride, and oxide coatings. Combinations of these coating materials are optimized to withstand specific wear conditions. Oxide coatings, mainly α-Al2O3, are especially desired because of their high hot-hardness, chemical inertness with respect to the workpiece, and their low friction. The search for possible alloy elements, which may facilitate the deposition of such oxides by means of physical vapor deposition (PVD) techniques, has been the goal of this thesis. The sought alloy should form thermodynamically stable or metastable compounds, compatible with the temperature of use in metal cutting application. This thesis deals with process development and coating characterization of such new oxide alloy thin films, focusing on the Al-V-O, Al-Cr-Si-O, and Cr-Zr-O systems. Alloying aluminum oxide with iso-valent vanadium is a candidate for forming the desired alloys. Therefore, coatings of (Al1-xVx)2O3, with x ranging from 0 to 1, were deposited with reactive sputter deposition. X-ray diffraction showed three different crystal structures depending on V-metal fraction in the coating: α-V2O3 rhombohedral structure for 100 at.% V, a defect spinel structure for the intermediate region, (63 - 42 at.% V), and a gamma-alumina-like solid solution at lower V-content, (18 and 7 at.%), were observed, the later was shifted to larger d-spacing compared to the pure γ-Al2O3 sample obtained if deposited with only Al-target. Annealing the Al-rich coatings in air resulted in formation of V2O5 crystals on the surface of the coating after annealing to 500 °C for 42 at.% V and 700 °C for 18 at.% V metal fraction respectively. The highest thermal stability was shown for pure γ-Al2O3-coating which transformed to α-Al2O3 after annealing to 1100° C. Highest hardness was observed for the Al-rich oxides, ~24 GPa. The hardness then decreases with increasing V-content, larger than 7 at.% V metal fraction. Doping the Al2O3 coating with 7 at.% V resulted in a significant surface smoothening compared to the binary oxide. The measured hardness after annealing in air decreased in conjunction with the onset of further oxidation of the coatings. This work increases the understanding of this complicated material system with respect to possible phases formed with pulsed DC magnetron sputtering deposition as well as their response to annealing in air. The inherent difficulties of depositing insulating oxide films with PVD, requiring a closed electrical circuit, makes the investigation of process stability an important part of this research. In this context, I investigated the influence of adding small amount of Si in Al-Cr cathode on the coating properties in a pulsed DC industrial cathodic arc system and the plasma characteristics, process parameters, and coating properties in a lab DC cathodic arc system. Si was chosen here due to a previous study showing improved erosion behavior of Al-Cr-Si over pure Al-Cr cathode without Si incorporation in the coating. The effect of Si in the Al-Cr cathode in the industrial cathodic arc system showed slight improvements on the cathode erosion but Si was found in all coatings where Si was added in the cathode. The Si addition promoted the formation of the B1-like metastable cubic oxide phase and the incorporation led to reduced or equal hardness values compared to the corresponding Si-free processes. The DC-arc plasma study on the same material system showed only small improvements in the cathode erosion and process stability (lower pressure and cathode voltage) when introducing 5 at.% Si in the Al70Cr30-cathode. The presence of volatile SiO species could be confirmed through plasma analysis, but the loss of Si through these species was negligible, since the coating composition matched the cathode composition also under these conditions. The positive effect of added Si on the process stability at the cathode surface, should be weighed against Si incorporation in the coating. This incorporation seems to lead to a reduction in mechanical properties in the as-deposited coatings and promote the formation of a B1-like cubic metastable oxide structure for the (Al,Cr)2O3 oxide. This formation may or may not be beneficial for the final application since literature indicates a slight stabilization of the metastable phase upon Si-incorporation, contrary to the effect of Cr, which stabilizes the α-phase. The thermal stability of alloys for metal cutting application is crucial for their use. Previous studies on another alloy system, Cr-Zr-O, had shown solid solution, for Cr-rich compositions in that material system, in the sought corundum structure. The thermal stability of α-Cr0.28Zr0.10O0.61 coating deposited by reactive radio frequency (RF)-magnetron sputtering at 500 °C was therefore investigated here after annealing in vacuum up to 870 °C. The annealed samples showed transformation of α-(Cr,Zr)2O3 and amorphous ZrOx-rich areas into tetragonal ZrO2 and bcc-Cr. The instability of the α-(Cr,Zr)2O3 is surprising and possibly related to the annealing being done under vacuum, facilitating the loss of oxygen. Further in situ synchrotron XRD annealing studies on the α-Cr0.28Zr0.10O0.61 coating in air and in vacuum showed increased stability for the air annealed sample up to at least 975 °C, accompanied with a slight increase in ex-situ measured nanohardness. The onset temperature for formation of tetragonal ZrO2 was similar to that for isothermally vacuum annealing. The synchrotron-vacuum annealed coating again decomposed into bcc-Cr and t-ZrO2, with an addition of monoclinic–ZrO2 due to grain growth. The stabilization of the room temperature metastable tetragonal ZrO2 phase, due to surface energy effects present with small grains sizes, may prove to be useful for metal cutting applications. The observed phase segregation of α-(Cr,Zr)2O3 and formation of tetragonal ZrO2 with corresponding increase in hardness for this pseudobinary oxide system also opens up design routes for pseudobinary oxides with tunable microstructural and mechanical properties.

Download or read book Modern Methods in Collisional Radiative Modeling of Plasmas written by Yuri Ralchenko and published by Springer. This book was released on 2016-02-25 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a compact yet comprehensive overview of recent developments in collisional-radiative (CR) modeling of laboratory and astrophysical plasmas. It describes advances across the entire field, from basic considerations of model completeness to validation and verification of CR models to calculation of plasma kinetic characteristics and spectra in diverse plasmas. Various approaches to CR modeling are presented, together with numerous examples of applications. A number of important topics, such as atomic models for CR modeling, atomic data and its availability and quality, radiation transport, non-Maxwellian effects on plasma emission, ionization potential lowering, and verification and validation of CR models, are thoroughly addressed. Strong emphasis is placed on the most recent developments in the field, such as XFEL spectroscopy. Written by leading international research scientists from a number of key laboratories, the book offers a timely summary of the most recent progress in this area. It will be a useful and practical guide for students and experienced researchers working in plasma spectroscopy, spectra simulations, and related fields.

Download or read book Metals Abstracts Index written by and published by . This book was released on 1995 with total page 1390 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Foundations of Vacuum Coating Technology written by Donald M. Mattox and published by William Andrew. This book was released on 2018-08-21 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Foundations of Vacuum Coating Technology, Second Edition, is a revised and expanded version of the first edition, which was published in 2003. The book reviews the histories of the various vacuum coating technologies and expands on the history of the enabling technologies of vacuum technology, plasma technology, power supplies, and low-pressure plasma-enhanced chemical vapor deposition. The melding of these technologies has resulted in new processes and products that have greatly expanded the application of vacuum coatings for use in our everyday lives. The book is unique in that it makes extensive reference to the patent literature (mostly US) and how it relates to the history of vacuum coating. The book includes a Historical Timeline of Vacuum Coating Technology and a Historical Timeline of Vacuum/Plasma Technology, as well as a Glossary of Terms used in the vacuum coating and surface engineering industries. - History and detailed descriptions of Vacuum Deposition Technologies - Review of Enabling Technologies and their importance to current applications - Extensively referenced text - Patents are referenced as part of the history - Historical Timelines for Vacuum Coating Technology and Vacuum/Plasma Technology - Glossary of Terms for vacuum coating

Download or read book Proton Therapy Physics written by Harald Paganetti and published by CRC Press. This book was released on 2016-04-19 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proton Therapy Physics goes beyond current books on proton therapy to provide an in-depth overview of the physics aspects of this radiation therapy modality, eliminating the need to dig through information scattered in the medical physics literature. After tracing the history of proton therapy, the book summarizes the atomic and nuclear physics background necessary for understanding proton interactions with tissue. It describes the physics of proton accelerators, the parameters of clinical proton beams, and the mechanisms to generate a conformal dose distribution in a patient. The text then covers detector systems and measuring techniques for reference dosimetry, outlines basic quality assurance and commissioning guidelines, and gives examples of Monte Carlo simulations in proton therapy. The book moves on to discussions of treatment planning for single- and multiple-field uniform doses, dose calculation concepts and algorithms, and precision and uncertainties for nonmoving and moving targets. It also examines computerized treatment plan optimization, methods for in vivo dose or beam range verification, the safety of patients and operating personnel, and the biological implications of using protons from a physics perspective. The final chapter illustrates the use of risk models for common tissue complications in treatment optimization. Along with exploring quality assurance issues and biological considerations, this practical guide collects the latest clinical studies on the use of protons in treatment planning and radiation monitoring. Suitable for both newcomers in medical physics and more seasoned specialists in radiation oncology, the book helps readers understand the uncertainties and limitations of precisely shaped dose distribution.