Download or read book Damage Modeling of Composite Structures written by Pengfei Liu and published by Elsevier. This book was released on 2021-03-09 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damage Modeling of Composite Structures: Strength, Fracture, and Finite Element Analysis provides readers with a fundamental overview of the mechanics of composite materials, along with an outline of an array of modeling and numerical techniques used to analyze damage, failure mechanisms and safety tolerance. Strength prediction and finite element analysis of laminated composite structures are both covered, as are modeling techniques for delaminated composites under compression and shear. Viscoelastic cohesive/friction coupled model and finite element analysis for delamination analysis of composites under shear and for laminates under low-velocity impact are all covered at length. A concluding chapter discusses multiscale damage models and finite element analysis of composite structures. Integrates intralaminar damage and interlaminar delamination under different load patterns, covering intralaminar damage constitutive models, failure criteria, damage evolution laws, and virtual crack closure techniques Discusses numerical techniques for progressive failure analysis and modeling, as well as numerical convergence and mesh sensitivity, thus allowing for more accurate modeling Features models and methods that can be seamlessly extended to analyze failure mechanisms and safety tolerance of composites under more complex loads, and in more extreme environments Demonstrates applications of damage models and numerical methods

Download or read book Damage and Failure of Composite Materials written by Ramesh Talreja and published by Cambridge University Press. This book was released on 2012-06-07 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together materials mechanics and modelling, this book provides a complete guide to damage mechanics of composite materials for engineers.

Download or read book Multiscale Modelling of Damage and Fracture Processes in Composite Materials written by Tomasz Sadowski and published by Springer Science & Business Media. This book was released on 2007-03-23 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores damage growth and fracture processes in cementitious, ceramic, polymer and metal matrix composites, integrating properties like stiffness and strength with observation at below macroscopic scale. Advances in multiscale modelling and analysis pertain directly to materials which either have a range of relevant microstructural scales, like metals, or do not have a well-defined microstructure, like cementitious or ceramic composites.

Download or read book Damage and Fracture of Composite Materials and Structures written by Mohd Nasir Tamin and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents recent research findings on fracture properties and behavior of the composites, and their damage and cracking process under both quasi-static and impact loading conditions. Theoretical treatment, experimental investigation and numerical simulation aspects of the mechanics of composites, including sandwich structures are included.

Download or read book Numerical Modelling of Failure in Advanced Composite Materials written by Pedro P. Camanho and published by Woodhead Publishing. This book was released on 2015-08-07 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Modelling of Failure in Advanced Composite Materials comprehensively examines the most recent analysis techniques for advanced composite materials. Advanced composite materials are becoming increasingly important for lightweight design in aerospace, wind energy, and mechanical and civil engineering. Essential for exploiting their potential is the ability to reliably predict their mechanical behaviour, particularly the onset and propagation of failure. Part One investigates numerical modeling approaches to interlaminar failure in advanced composite materials. Part Two considers numerical modelling approaches to intralaminar failure. Part Three presents new and emerging advanced numerical algorithms for modeling and simulation of failure. Part Four closes by examining the various engineering and scientific applications of numerical modeling for analysis of failure in advanced composite materials, such as prediction of impact damage, failure in textile composites, and fracture behavior in through-thickness reinforced laminates. - Examines the most recent analysis models for advanced composite materials in a coherent and comprehensive manner - Investigates numerical modelling approaches to interlaminar failure and intralaminar failure in advanced composite materials - Reviews advanced numerical algorithms for modeling and simulation of failure - Examines various engineering and scientific applications of numerical modelling for analysis of failure in advanced composite materials

Download or read book Dynamic Deformation Damage and Fracture in Composite Materials and Structures written by Vadim Silberschmidt and published by Woodhead Publishing. This book was released on 2016-01-23 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials, with their higher exposure to dynamic loads, have increasingly been used in aerospace, naval, automotive, sports and other sectors over the last few decades. Dynamic Deformation, Damage and Fracture in Composite Materials and Structures reviews various aspects of dynamic deformation, damage and fracture, mostly in composite laminates and sandwich structures, in a broad range of application fields including aerospace, automotive, defense and sports engineering. As the mechanical behavior and performance of composites varies under different dynamic loading regimes and velocities, the book is divided into sections that examine the different loading regimes and velocities. Part one examine low-velocity loading and part two looks at high-velocity loading. Part three then assesses shock and blast (i.e. contactless) events and the final part focuses on impact (contact) events. As sports applications of composites are linked to a specific subset of dynamic loading regimes, these applications are reviewed in the final part. - Examines dynamic deformation and fracture of composite materials - Covers experimental, analytical and numerical aspects - Addresses important application areas such as aerospace, automotive, wind energy and defence, with a special section on sport applications

Download or read book Interface Fracture and Delaminations in Composite Materials written by Leslie Banks-Sills and published by Springer. This book was released on 2017-07-05 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part I of this SpringerBrief presents the problem of a crack between two dissimilar isotropic materials and describes the mathematical background. A fracture criterion is discussed and Methods for calculating fracture parameters such as stress intensity factors using the finite element method and three post-processors are considered. Actual test data and both deterministic and statistical failure curves are presented.In Part II of the book, similar descriptions are given for delaminations in composite laminates. The mathematical treatment of this type of damage including the first term of the asymptotic expansion of the stress and displacement fields is considered. Numerical post-processors for determining stress intensity factors for these cases are reviewed. Two examples of specific laminates are presented: one with a failure curve and the other with a failure surface. Finally, beam specimens used for testing such failures are discussed.

Download or read book Guidelines for Applying Cohesive Models to the Damage Behaviour of Engineering Materials and Structures written by Karl-Heinz Schwalbe and published by Springer Science & Business Media. This book was released on 2012-07-18 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief provides guidance for the application of cohesive models to determine damage and fracture in materials and structural components. This can be done for configurations with or without a pre-existing crack. Although the brief addresses structural behaviour, the methods described herein may also be applied to any deformation induced material damage and failure, e.g. those occurring during manufacturing processes. The methods described are applicable to the behaviour of ductile metallic materials and structural components made thereof. Hints are also given for applying the cohesive model to other materials.

Download or read book Defects and Damage in Composite Materials and Structures written by Rikard Benton Heslehurst and published by CRC Press. This book was released on 2014-04-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structure or result in unfavorable load paths. Emphasizing defect identification and restitution, Defects and Damage in Composite Materials and Structures explains how defects and damage in composite materials and structures impact composite component performance. Providing ready access to an extensive, descriptive list of defects and damage types, this must-have reference: Examines defect criticality in composite structures Recommends repair actions to restore structural integrity Discusses failure modes and mechanisms of composites due to defects Reviews NDI processes for finding and identifying defects in composite materials Relating defect detection methods to defect type, the author merges his experience in the field of in-service activities for composite airframe maintenance and repair with indispensable reports and articles on defects and damage in advanced composite materials from the last 50 years.

Download or read book Mechanics of Composite Hybrid and Multifunctional Materials Fracture Fatigue Failure and Damage Evolution Volume 3 written by Vijay Chalivendra and published by Springer Nature. This book was released on 2022-01-01 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Composite, Hybrid, and Multifunctional Materials, Fracture, Fatigue, Failure and Damage Evolution, Volume 3 of the Proceedings of the 2021 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of four from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Recycled Constituent Composites Damage Detection Advanced Imaging of Composites Multifunctional Materials Composite Interfaces Tunable Composites Novel Experimental Methods Extreme Environments Interfacial Fracture Integration of Models & Experiments Mechanics of Energy & Energetic Materials Integration of Models & Experiments In Situ Techniques for Fatigue & Fracture Microscale & Microstructural Effects on Mechanical Behavior

Download or read book New Achievements in Continuum Mechanics and Thermodynamics written by Bilen Emek Abali and published by Springer. This book was released on 2019-03-13 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a liber amicorum dedicated to Wolfgang H. Müller, and highlights recent advances in Prof. Müller’s major fields of research: continuum mechanics, generalized mechanics, thermodynamics, mechanochemistry, and geomechanics. Over 50 of Prof. Müller’s friends and colleagues contributed to this book, which commemorates his 60th birthday and was published in recognition of his outstanding contributions.

Download or read book The Virtual Crack Closure Technique History Approach and Applications written by Ronald Krueger and published by . This book was released on 2002 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the virtual crack closure technique is presented. The approach used is discussed, the history summarized, and insight into its applications provided. Equations for two-dimensional quadrilateral elements with linear and quadratic shape functions are given. Formula for applying the technique in conjuction with three-dimensional solid elements as well as plate/shell elements are also provided. Necessary modifications for the use of the method with geometrically nonlinear finite element analysis and corrections required for elements at the crack tip with different lengths and widths are discussed. The problems associated with cracks or delaminations propagating between different materials are mentioned briefly, as well as a strategy to minimize these problems. Due to an increased interest in using a fracture mechanics based approach to assess the damage tolerance of composite structures in the design phase and during certification, the engineering problems selected as examples and given as references focus on the application of the technique to components made of composite materials.

Download or read book 3D Discrete Element Workbench for Highly Dynamic Thermo mechanical Analysis written by Damien Andre and published by John Wiley & Sons. This book was released on 2015-10-26 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex behavior models (plasticity, cracks, visco elascticity) face some theoretical difficulties for the determination of the behavior law at the continuous scale. When homogenization fails to give the right behavior law, a solution is to simulate the material at a meso scale in order to simulate directly a set of discrete properties that are responsible of the macroscopic behavior. The discrete element model has been developed for granular material. The proposed set shows how this method is capable to solve the problem of complex behavior that are linked to discrete meso scale effects. The first book solves the local problem, the second one presents a coupling approach to link the structural effects to the local ones, this third book presents the software workbench that includes all the theoretical developments.

Download or read book Fracture of Polymers Composites and Adhesives written by A Pavan and published by Elsevier. This book was released on 2000-10-10 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a selection of fully peer-reviewed papers which were presented at the 2nd ESIS TC4 Conference, held in Les Diablerets, Switzerland 13 - 15 September 1999. The meeting was designed to reflect the activities of the Committee over the last 15 years, and to plan future activities. The papers have been divided into four chapters under the headings of Composites, Elastic-Plastic Fracture, Adhesion, and Impact and General Fracture. These are convenient groupings, but there are many interactions between the areas, with the common theme of Fracture Mechanics underlying it all.

Download or read book Modeling the Effect of Damage in Composite Structures written by Christos Kassapoglou and published by John Wiley & Sons. This book was released on 2015-05-06 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensively covers new and existing methods for the design and analysis of composites structures with damage present Provides efficient and accurate approaches for analysing structures with holes and impact damage Introduces a new methodology for fatigue analysis of composites Provides design guidelines, and step by step descriptions of how to apply the methods, along with evaluation of their accuracy and applicability Includes problems and exercises Accompanied by a website hosting lecture slides and solutions

Download or read book Finite Element Analysis of Composite Materials using AbaqusTM written by Ever J. Barbero and published by CRC Press. This book was released on 2013-04-18 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed from the author's graduate-level course on advanced mechanics of composite materials, Finite Element Analysis of Composite Materials with Abaqus shows how powerful finite element tools address practical problems in the structural analysis of composites. Unlike other texts, this one takes the theory to a hands-on level by actually solving

Download or read book Computational Mesomechanics of Composites written by Leon L. Mishnaevsky, Jr and published by John Wiley & Sons. This book was released on 2007-08-20 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical properties of composite materials can be improved by tailoring their microstructures. Optimal microstructures of composites, which ensure desired properties of composite materials, can be determined in computational experiments. The subject of this book is the computational analysis of interrelations between mechanical properties (e.g., strength, damage resistance stiffness) and microstructures of composites. The methods of mesomechanics of composites are reviewed, and applied to the modelling of the mechanical behaviour of different groups of composites. Individual chapters are devoted to the computational analysis of the microstructure- mechanical properties relationships of particle reinforced composites, functionally graded and particle clusters reinforced composites, interpenetrating phase and unidirectional fiber reinforced composites, and machining tools materials.