Download or read book Modeling Multiphase Materials Processes written by Manabu Iguchi and published by Springer Science & Business Media. This book was released on 2010-11-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling Multiphase Materials Processes: Gas-Liquid Systems describes the methodology and application of physical and mathematical modeling to multi-phase flow phenomena in materials processing. The book focuses on systems involving gas-liquid interaction, the most prevalent in current metallurgical processes. The performance characteristics of these processes are largely dependent on transport phenomena. This volume covers the inherent characteristics that complicate the modeling of transport phenomena in such systems, including complex multiphase structure, intense turbulence, opacity of fluid, high temperature, coupled heat and mass transfer, chemical reactions in some cases, and poor wettability of the reactor walls. Also discussed are: solutions based on experimental and numerical modeling of bubbling jet systems, recent advances in the modeling of nanoscale multi-phase phenomena and multiphase flows in micro-scale and nano-scale channels and reactors. Modeling Multiphase Materials Processes: Gas-Liquid Systems will prove a valuable reference for researchers and engineers working in mathematical modeling and materials processing.

Download or read book CFD Modeling and Simulation in Materials Processing written by Laurentiu Nastac and published by John Wiley & Sons. This book was released on 2012-05-09 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by Association for Iron and Steel Technology and the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA, March 11-15, 2012

Download or read book Modeling of Multiphase Flow with Solidification and Chemical Reaction in Materials Processing written by Jiuan Wei and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mathematical and Physical Modeling of Materials Processing Operations written by Olusegun Johnso Ilegbusi and published by CRC Press. This book was released on 1999-07-29 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past few decades have brought significant advances in the computational methods and in the experimental techniques used to study transport phenomena in materials processing operations. However, the advances have been made independently and with competition between the two approaches. Mathematical models are easier and less costly to implement, but experiments are essential for verifying theoretical models. In Mathematical and Physical Modeling of Materials Processing Operations, the authors bridge the gap between mathematical modelers and experimentalists. They combine mathematical and physical modeling principles for materials processing operations simulation and use numerous examples to compare theoretical and experimental results. The modeling of transport processes is multi-disciplinary, involving concepts and principles not all of which can be associated with just one field of study. Therefore, the authors have taken care to ensure that the text is self-sustaining through the variety and breadth of topics covered. Beyond the usual topics associated with transport phenomena, the authors also include detailed discussion of numerical methods and implementation of process models, software and hardware selection and application, and representation of auxiliary relationships, including turbulence modeling, chemical kinetics, magnetohydrodynamics, and multi-phase flow. They also provide several correlations for representing the boundary conditions of fluid flow, heat transfer, and mass transfer phenomena. Mathematical and Physical Modeling of Materials Processing Operations is ideal for introducing these tools to materials engineers and researchers. Although the book emphasizes materials, some of the topics will prove interesting and useful to researchers in other fields of chemical and mechanical engineering.

Download or read book Multiphase Phenomena and CFD Modeling and Simulation in Materials Processes written by Laurentiu Nastac and published by Wiley-TMS. This book was released on 2004-03-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains proceedings dealing with the topics of multiphase phenomena in materials processing and computational fluid dynamics (CFD) modeling and simulation of engineering processes. This collection gathers papers from researchers and engineers involved in the modeling of multiscale and multiphase phenomena in material processing systems. Papers address gas-particle flows, liquid-liquid phase flows, bubbly driven flows, granular flows, liquid-solid flows, multiphase flows in external fields, multiscale heat and mass transfer, and microstructure formation in these multiphase systems. Papers also focus on the CFD modeling and simulation of various engineering processes, such as metal processes including casting, forging, welding, heat treating, and VAR/ESR/PAM/EBM remelting processes; coatings including PVD, CVD, and plasma-assisted EBM-PVD technologies; and other surface engineering processes including induction, laser, and EB thermal processing. The CFD modeling and simulation proceedings discuss applications of CFD to engineering processes and demonstrate how CFD could help scientists and engineers to better understand the fundamentals of engineering processes.

Download or read book Modelling of Materials Processing written by Gregory C. Stangle and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book about mathematical modelling. It focuses on the modelling of the preparation of materials. Materials are important, of course, in an economic sense: the "goods" of goods-and-services are made of materials. This provides a strong incentive to produce good materials and to improve existing materials. Mathematical modelling can help in this regard. Without a doubt, modelling a materials processing operation is not strictly necessary. Materials synthesis and fabrication processes certainly existed before the invention of mathematics and computers, and well before the combined use of mathematics and computers. Modelling can, however, be of assistance--if done properly--and if used properly. The mathematical modelling described in this book is, at its root, a rather formal, structured way of thinking about materials synthesis and fabrication processes. It requires looking at a process as a whole. It requires considering everything that is or might be important. It requires translating the details of a given physical process into one or more mathematical equations. It requires knowing how to simplify the equations without over-simplifying them.

Download or read book Multiphase Flow and Transport Processes in the Subsurface written by Rainer Helmig and published by Springer. This book was released on 2011-09-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: One important precondition for modeling multiphase flow and transport processes in the hydrosystem "subsurface" is the general formulation of a model. The objective of this book is to present a consistent, easily accessible formulation of the fundamental phenomena and concepts, to give a uniform description of mathematical and numerical modeling, and to show the latest developments in the field of simulation of multiphase processes, especially in porous and heterogeneous media. Some general aspects which affect the selection of the relevant processes and the corresponding parameters as well as the mathematical and numerical model concepts are discussed in detail.

Download or read book Materials Processing Fundamentals 2019 written by Guillaume Lambotte and published by Springer. This book was released on 2019-02-09 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes contributions from the Materials Processing Fundamentals Symposium held at the TMS 2019 Annual Meeting & Exhibition in San Antonio, Texas. This volume includes contributions on the physical and numerical modeling of materials processing, and covers a range of metals and minerals. Authors present models and results related the basics of processing such as extraction, joining, separation, and casting. The corresponding fundamentals of mass and heat transport as well as physical and thermodynamics properties are addressed, allowing for a cross-disciplinary vision of the field.

Download or read book Quantitative Phase Field Modelling of Solidification written by Nikolas Provatas and published by CRC Press. This book was released on 2021-10-12 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a study of phase field modelling of solidification in metal alloy systems. It is divided in two main themes. The first half discusses several classes of quantitative multi-order parameter phase field models for multi-component alloy solidification. These are derived in grand potential ensemble, thus tracking solidification in alloys through the evolution of the chemical potentials of solute species rather than the more commonly used solute concentrations. The use of matched asymptotic analysis for making phase field models quantitative is also discussed at length, and derived in detail in order to make this somewhat abstract topic accessible to students. The second half of the book studies the application of phase field modelling to rapid solidification where solute trapping and interface undercooling follow highly non-equilibrium conditions. In this limit, matched asymptotic analysis is used to map phase field evolution equations onto the continuous growth model, which is generally accepted as a sharp-interface description of solidification at rapid solidification rates. This book will be of interest to graduate students and researchers in materials science and materials engineering. Key Features Presents a clear path to develop quantitative multi-phase and multi-component phase field models for solidification and other phase transformation kinetics Derives and discusses the quantitative nature of the model formulations through matched interface asymptotic analysis Explores a framework for quantitative treatment of rapid solidification to control solute trapping and solute drag dynamics

Download or read book CFD Modeling and Simulation in Materials Processing 2016 written by Laurentiu Nastac and published by Springer. This book was released on 2017-08-31 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CFD Modeling and Simulation in Materials Processing 2018 written by Laurentiu Nastac and published by Springer. This book was released on 2018-01-10 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents contributions on computational fluid dynamics (CFD) modeling and simulation of engineering processes from researchers and engineers involved in the modeling of multiscale and multiphase phenomena in material processing systems. The following processes are covered: Additive Manufacturing (Selective Laser Melting and Laser Powder Bed Fusion); Ironmaking and Steelmaking (Ladle Metallurgical Furnace, EAF, Continuous Casting, Blown Converter, Reheating Furnace, Rotary Hearth Furnace); Degassing; High Pressure Gas Atomization of Liquid Metals; Electroslag Remelting; Electrokinetic Deposition; Friction Stir Welding; Quenching; High Pressure Die Casting; Core Injection Molding; Evaporation of Metals; Investment Casting; Electromagnetic Levitation; Ingot Casting; Casting and Solidification with External Field (electromagnetic stirring and ultrasonic cavitation) Interaction and Microstructure Evolution The collection also covers applications of CFD to engineering processes, and demonstrates how CFD can help scientists and engineers to better understand the fundamentals of engineering processes.

Download or read book Homogenization Methods in Partial Differential Equations and Modeling Multiphase Materials written by Chaocheng Huang and published by . This book was released on 1995 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book From Multiscale Modeling to Meso Science written by Jinghai Li and published by Springer Science & Business Media. This book was released on 2013-03-22 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiscale modeling is becoming essential for accurate, rapid simulation in science and engineering. This book presents the results of three decades of research on multiscale modeling in process engineering from principles to application, and its generalization for different fields. This book considers the universality of meso-scale phenomena for the first time, and provides insight into the emerging discipline that unifies them, meso-science, as well as new perspectives for virtual process engineering. Multiscale modeling is applied in areas including: multiphase flow and fluid dynamics chemical, biochemical and process engineering mineral processing and metallurgical engineering energy and resources materials science and engineering Jinghai Li is Vice-President of the Chinese Academy of Sciences (CAS), a professor at the Institute of Process Engineering, CAS, and leader of the EMMS (Energy-minimizing multiscale) Group. Wei Ge, Wei Wang, Ning Yang and Junwu Wang are professors at the EMMS Group, part of the Institute of Process Engineering, CAS. Xinhua Liu, Limin Wang, Xianfeng He and Xiaowei Wang are associate professors at the EMMS Group, part of the Institute of Process Engineering, CAS. Mooson Kwauk is an emeritus director of the Institute of Process Engineering, CAS, and is an advisor to the EMMS Group.

Download or read book Chemical Reactor Modeling written by Hugo A. Jakobsen and published by Springer Science & Business Media. This book was released on 2014-04-02 with total page 1589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Reactor Modeling closes the gap between Chemical Reaction Engineering and Fluid Mechanics. The second edition consists of two volumes: Volume 1: Fundamentals. Volume 2: Chemical Engineering Applications In volume 1 most of the fundamental theory is presented. A few numerical model simulation application examples are given to elucidate the link between theory and applications. In volume 2 the chemical reactor equipment to be modeled are described. Several engineering models are introduced and discussed. A survey of the frequently used numerical methods, algorithms and schemes is provided. A few practical engineering applications of the modeling tools are presented and discussed. The working principles of several experimental techniques employed in order to get data for model validation are outlined. The monograph is based on lectures regularly taught in the fourth and fifth years graduate courses in transport phenomena and chemical reactor modeling and in a post graduate course in modern reactor modeling at the Norwegian University of Science and Technology, Department of Chemical Engineering, Trondheim, Norway. The objective of the book is to present the fundamentals of the single-fluid and multi-fluid models for the analysis of single and multiphase reactive flows in chemical reactors with a chemical reactor engineering rather than mathematical bias. Organized into 13 chapters, it combines theoretical aspects and practical applications and covers some of the recent research in several areas of chemical reactor engineering. This book contains a survey of the modern literature in the field of chemical reactor modeling.

Download or read book CFD Modeling and Simulation in Materials Processing 2016 written by Lifeng Zhang and published by John Wiley & Sons. This book was released on 2016-02-08 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection explores computational fluid dynamics (CFD) modeling and simulation of engineering processes, with contributions from researchers and engineers involved in the modeling of multiscale and multiphase phenomena in material processing systems. The papers cover the following processes: Iron and Steelmaking (Tundish, Casting, Converter, Blast Furnace); Microstructure Evolution; Casting with External Field Interaction; and Smelting, Degassing, Ladle Processing, Mechanical Mixing, and Ingot Casting. The collection also covers applications of CFD to engineering processes, and demonstrates how CFD can help scientists and engineers to better understand the fundamentals of engineering processes.

Download or read book Numerical Methods and Advanced Simulation in Biomechanics and Biological Processes written by Miguel Cerrolaza and published by Academic Press. This book was released on 2017-10-17 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods and Advanced Simulation in Biomechanics and Biological Processes covers new and exciting modeling methods to help bioengineers tackle problems for which the Finite Element Method is not appropriate. The book covers a wide range of important subjects in the field of numerical methods applied to biomechanics, including bone biomechanics, tissue and cell mechanics, 3D printing, computer assisted surgery and fluid dynamics. Modeling strategies, technology and approaches are continuously evolving as the knowledge of biological processes increases. Both theory and applications are covered, making this an ideal book for researchers, students and R&D professionals. Provides non-conventional analysis methods for modeling Covers the Discrete Element Method (DEM), Particle Methods (PM), MessLess and MeshFree Methods (MLMF), Agent-Based Methods (ABM), Lattice-Boltzmann Methods (LBM) and Boundary Integral Methods (BIM) Includes contributions from several world renowned experts in their fields Compares pros and cons of each method to help you decide which method is most applicable to solving specific problems

Download or read book Modeling Design and Optimization of Multiphase Systems in Minerals Processing written by Luis A. Cisternas and published by MDPI. This book was released on 2020-03-19 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral processing deals with complex particle systems with two-, three- and more phases. The modeling and understanding of these systems are a challenge for research groups and a need for the industrial sector. This Special Issue aims to present new advances, methodologies, applications, and case studies of computer-aided analysis applied to multiphase systems in mineral processing. This includes aspects such as modeling, design, operation, optimization, uncertainty analysis, among other topics. The special issue contains a review article and eleven articles that cover different methodologies of modeling, design, optimization, and analysis in problems of adsorption, leaching, flotation, and magnetic separation, among others. Consequently, the topics covered are of interest to readers from academia and industry.