Download or read book Modeling Groundwater Flow and Contaminant Transport written by Jacob Bear and published by Springer Science & Business Media. This book was released on 2010-01-18 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many parts of the world, groundwater resources are under increasing threat from growing demands, wasteful use, and contamination. To face the challenge, good planning and management practices are needed. A key to the management of groundwater is the ability to model the movement of fluids and contaminants in the subsurface. The purpose of this book is to construct conceptual and mathematical models that can provide the information required for making decisions associated with the management of groundwater resources, and the remediation of contaminated aquifers. The basic approach of this book is to accurately describe the underlying physics of groundwater flow and solute transport in heterogeneous porous media, starting at the microscopic level, and to rigorously derive their mathematical representation at the macroscopic levels. The well-posed, macroscopic mathematical models are formulated for saturated, single phase flow, as well as for unsaturated and multiphase flow, and for the transport of single and multiple chemical species. Numerical models are presented and computer codes are reviewed, as tools for solving the models. The problem of seawater intrusion into coastal aquifers is examined and modeled. The issues of uncertainty in model input data and output are addressed. The book concludes with a chapter on the management of groundwater resources. Although one of the main objectives of this book is to construct mathematical models, the amount of mathematics required is kept minimal.
Download or read book Characterization Modeling Monitoring and Remediation of Fractured Rock written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2021-01-29 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractured rock is the host or foundation for innumerable engineered structures related to energy, water, waste, and transportation. Characterizing, modeling, and monitoring fractured rock sites is critical to the functioning of those infrastructure, as well as to optimizing resource recovery and contaminant management. Characterization, Modeling, Monitoring, and Remediation of Fractured Rock examines the state of practice and state of art in the characterization of fractured rock and the chemical and biological processes related to subsurface contaminant fate and transport. This report examines new developments, knowledge, and approaches to engineering at fractured rock sites since the publication of the 1996 National Research Council report Rock Fractures and Fluid Flow: Contemporary Understanding and Fluid Flow. Fundamental understanding of the physical nature of fractured rock has changed little since 1996, but many new characterization tools have been developed, and there is now greater appreciation for the importance of chemical and biological processes that can occur in the fractured rock environment. The findings of Characterization, Modeling, Monitoring, and Remediation of Fractured Rock can be applied to all types of engineered infrastructure, but especially to engineered repositories for buried or stored waste and to fractured rock sites that have been contaminated as a result of past disposal or other practices. The recommendations of this report are intended to help the practitioner, researcher, and decision maker take a more interdisciplinary approach to engineering in the fractured rock environment. This report describes how existing tools-some only recently developed-can be used to increase the accuracy and reliability of engineering design and management given the interacting forces of nature. With an interdisciplinary approach, it is possible to conceptualize and model the fractured rock environment with acceptable levels of uncertainty and reliability, and to design systems that maximize remediation and long-term performance. Better scientific understanding could inform regulations, policies, and implementation guidelines related to infrastructure development and operations. The recommendations for research and applications to enhance practice of this book make it a valuable resource for students and practitioners in this field.
Download or read book Flow and Contaminant Transport in Fractured Rock written by Jacob Bear and published by Academic Press. This book was released on 2012-12-02 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past two or three decades, fractured rock domains have received increasing attention not only in reservoir engineering and hydrology, but also in connection with geological isolation of radioactive waste. Locations in both the saturated and unsaturated zones have been under consideration because such repositories are sources of heat and potential sources of groundwater contamination. Thus, in addition to the transport of mass of fluid phases in single and multiphase flow, the issues of heat transport and mass transport of components have to be addressed.
Download or read book Plans and Practices for Groundwater Protection at the Los Alamos National Laboratory written by National Research Council and published by National Academies Press. This book was released on 2007-10-18 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world's first nuclear bomb was a developed in 1954 at a site near the town of Los Alamos, New Mexico. Designated as the Los Alamos National Laboratory (LANL) in 1981, the 40-square-mile site is today operated by Log Alamos National Security LLC under contract to the National Nuclear Security Administration (NNSA) of the U.S. Department of Energy (DOE). Like other sites in the nation's nuclear weapons complex, the LANL site harbors a legacy of radioactive waste and environmental contamination. Radioactive materials and chemical contaminants have been detected in some portions of the groundwater beneath the site. Under authority of the U.S. Environmental Protection Agency, the State of New Mexico regulates protection of its water resources through the New Mexico Environment Department (NMED). In 1995 NMED found LANL's groundwater monitoring program to be inadequate. Consequently LANL conducted a detailed workplan to characterize the site's hydrogeology in order to develop an effective monitoring program. The study described in Plans and Practices for Groundwater Protection at the Los Alamos National Laboratory: Final Report was initially requested by NNSA, which turned to the National Academies for technical advice and recommendations regarding several aspects of LANL's groundwater protection program. The DOE Office of Environmental Management funded the study. The study came approximately at the juncture between completion of LANL's hydrogeologic workplan and initial development of a sitewide monitoring plan.
Download or read book Rock Fractures and Fluid Flow written by Committee on Fracture Characterization and Fluid Flow and published by National Academies Press. This book was released on 1996-09-10 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific understanding of fluid flow in rock fractures--a process underlying contemporary earth science problems from the search for petroleum to the controversy over nuclear waste storage--has grown significantly in the past 20 years. This volume presents a comprehensive report on the state of the field, with an interdisciplinary viewpoint, case studies of fracture sites, illustrations, conclusions, and research recommendations. The book addresses these questions: How can fractures that are significant hydraulic conductors be identified, located, and characterized? How do flow and transport occur in fracture systems? How can changes in fracture systems be predicted and controlled? Among other topics, the committee provides a geomechanical understanding of fracture formation, reviews methods for detecting subsurface fractures, and looks at the use of hydraulic and tracer tests to investigate fluid flow. The volume examines the state of conceptual and mathematical modeling, and it provides a useful framework for understanding the complexity of fracture changes that occur during fluid pumping and other engineering practices. With a practical and multidisciplinary outlook, this volume will be welcomed by geologists, petroleum geologists, geoengineers, geophysicists, hydrologists, researchers, educators and students in these fields, and public officials involved in geological projects.
Download or read book Scientific Investigations Report written by Sharon E. Kroening and published by . This book was released on 2004 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Groundwater in Fractured Bedrock Environments Managing Catchment and Subsurface Resources written by U. Ofterdinger and published by Geological Society of London. This book was released on 2019-07-19 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractured bedrock aquifers have traditionally been regarded as low-productivity aquifers, with only limited relevance to regional groundwater resources. It is now being increasingly recognised that these complex bedrock aquifers can play an important role in catchment management and subsurface energy systems. At shallow to intermediate depth, fractured bedrock aquifers help to sustain surface water baseflows and groundwater dependent ecosystems, provide local groundwater supplies and impact on contaminant transfers on a catchment scale. At greater depths, understanding the properties and groundwater flow regimes of these complex aquifers can be crucial for the successful installation of subsurface energy and storage systems, such as deep geothermal or Aquifer Thermal Energy Storage systems and natural gas or CO2 storage facilities as well as the exploration of natural resources such as conventional/unconventional oil and gas. In many scenarios, a robust understanding of fractured bedrock aquifers is required to assess the nature and extent of connectivity between such engineered subsurface systems at depth and overlying receptors in the shallow subsurface.
Download or read book Karst Aquifers Characterization and Engineering written by Zoran Stevanović and published by Springer. This book was released on 2015-02-25 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical training guidebook makes an important contribution to karst hydrogeology. It presents supporting material for academic courses worldwide that include this and similar topics. It is an excellent sourcebook for students and other attendees of the International Karst School: Characterization and Engineering of Karst Aquifers, which opened in Trebinje, Bosnia & Herzegovina in 2014 and which will be organized every year in early summer. As opposed to more theoretical works, this is a catalog of possible engineering interventions in karst and their implications. Although the majority of readers will be professionals with geology/hydrogeology backgrounds, the language is not purely technical making it accessible to a wider audience. This means that the methodology, case studies and experiences presented will also benefit water managers working in karst environments.
Download or read book Applied Hydrogeology of Fractured Rocks written by B.B.S. Singhal † and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrology is a topical and growing subject, as the earth's water resources become scarcer and more vulnerable. Although more than half the surface area of continents is covered with hard fractured rocks, there has until now been no single book available dealing specifically with fractured rock hydrogeology. This book deals comprehensively with the fundamental principles for understanding these rocks, as well as with exploration techniques and assessment. It also provides in-depth discussion of structural mapping, remote sensing, geophysical exploration, GIS, field hydraulic testing, groundwater quality and contamination, geothermal reservoirs, and resources assessment and management. Hydrogeological aspects of various lithology groups, including crystalline rocks, volcanic rocks, carbonate rocks and clastic formations, are dealt with separately, using and discussing examples from all over the world. Applied Hydrogeology of Fractured Rocks will be an invaluable reference source for postgraduate students, researchers, exploration scientists, and engineers engaged in the field of groundwater development in fractured rock areas.
Download or read book A Guide to Regional Groundwater Flow in Fractured Rock Aquifers written by Peter G. Cook and published by CSIRO Publishing. This book was released on 2003-01-01 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes field methods for measuring rates of groundwater flow in fractured rock aquifers and draws heavily on results of three recent studies in the Clare Valley, South Australia; Atherton Tablelands, Queensland; and Wagga Wagga, NSW.
Download or read book The Handbook of Groundwater Engineering written by John H. Cushman and published by CRC Press. This book was released on 2016-11-25 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition adds several new chapters and is thoroughly updated to include data on new topics such as hydraulic fracturing, CO2 sequestration, sustainable groundwater management, and more. Providing a complete treatment of the theory and practice of groundwater engineering, this new handbook also presents a current and detailed review of how to model the flow of water and the transport of contaminants both in the unsaturated and saturated zones, covers the protection of groundwater, and the remediation of contaminated groundwater.
Download or read book Applied Contaminant Transport Modeling written by Chunmiao Zheng and published by Wiley. This book was released on 1995-08-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Contaminant Transport Modeling Theory and Practice Chunmiao Zheng and Gordon D. Bennett The design of remedial systems for groundwater contamination requires a thorough understanding of how various interacting processes — advection, dispersion, and chemical reactions — influence the movement and fate of contaminants. Solute transport simulation provides an ideal vehicle to synthesize these controlling processes, evaluate their interactions, and test the effectiveness of remedial measures. Applied Contaminant Transport Modeling is the first complete resource designed to provide clear coverage of the basic principles of solute transport simulation — including the theory behind the most common numerical techniques for solving transport equations, and step-by-step guidance on the development and use of field-scale models. Written by two experts with extensive practical experience in the field, Applied Contaminant Transport Modeling clearly explains: Factors controlling the transport and fate of solutes in the subsurface —g including advective and dispersive transport and chemical reaction — and the equations governing these processes Development of mathematical models of solute transport regimes and representative analytical solutions to the transport equation Particle tracking as a practical tool for solving many types of field problems Development of Eulerian-Lagrangian methods for solving advection-dispersion-reaction equations Step-by-step development and application of solute transport models — emphasizing problem formulation, model setup, parameter selection, calibration, and sensitivity analysis Sources of uncertainty in transport simulation, and methods of evaluating and managing uncertainty Applied Contaminant Transport Modeling presents detailed case histories illustrating how hydrologists, geologists, chemists, and environmental engineers apply transport models in real-life situations, including landfills, hazardous waste sites, and contaminated aquifers. An optional diskette designed to accompany the text provides software to help the reader explore the concepts and techniques presented in the text and gain hands-on experience in transport simulation. Driven by growing concern over groundwater quality and the rapid dissemination of computer technology, solute transport simulation has become an essential means of evaluating and solving groundwater contamination and remediation problems. Applied Contaminant Transport Modeling provides you with the tools to master this significant field of study.
Download or read book Hydrogeology written by Alain Dassargues and published by CRC Press. This book was released on 2018-09-03 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text combines the science and engineering of hydrogeology in an accessible, innovative style. As well as providing physical descriptions and characterisations of hydrogeological processes, it also sets out the corresponding mathematical equations for groundwater flow and solute/heat transport calculations. And, within this, the methodological and conceptual aspects for flow and contaminant transport modelling are discussed in detail. This comprehensive analysis forms the ideal textbook for graduate and undergraduate students interested in groundwater resources and engineering, and indeed its analyses can apply to researchers and professionals involved in the area.
Download or read book Assessing Ground water Vulnerability to Contamination written by Michael J. Focazio and published by . This book was released on 2002 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bioremediation and Natural Attenuation written by Pedro J. Alvarez and published by John Wiley & Sons. This book was released on 2005-12-16 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: A groundbreaking text and professional resource on natural attenuation technology Natural attenuation is rapidly becoming a widely used approach to manage groundwater and soil contamination by hazardous substances in petroleum-product releases and leachate from hazardous waste sites and landfills. This book provides, under one cover, the current methodologies needed by groundwater scientists and engineers in their efforts to evaluate subsurface contamination problems, to estimate risk to human health and ecosystems through mathematical models, and to design and formulate appropriate remediation strategies. Incorporating the authors' extensive backgrounds as educators, researchers, and consultants in environmental biotechnology and hydrogeology, the text emphasizes new concepts and recent advances in the science, including: Quantification of the role of microbes in natural attenuation Biodegradation and chemical transformation principles Immobilization and phase change Biotransformation mechanisms Groundwater flow and contaminant transport Analytical models for contaminant transport and reaction processes Numerical modeling of contaminant transport, transformation, and degradation Detailed descriptions of fundamental processes, characterization approaches, and analytical and numerical methods tied to relevant real-world applications make Bioremediation and Natural Attenuation: Process Fundamentals and Mathematical Models both a timely course text in hydrogeology and environmental engineering and a valuable reference for anyone in the groundwater or risk assessment professions.
Download or read book Design Guidelines for Conventional Pump and treat Systems written by and published by . This book was released on 1997 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FEFLOW written by Hans-Jörg G. Diersch and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: FEFLOW is an acronym of Finite Element subsurface FLOW simulation system and solves the governing flow, mass and heat transport equations in porous and fractured media by a multidimensional finite element method for complex geometric and parametric situations including variable fluid density, variable saturation, free surface(s), multispecies reaction kinetics, non-isothermal flow and multidiffusive effects. FEFLOW comprises theoretical work, modeling experiences and simulation practice from a period of about 40 years. In this light, the main objective of the present book is to share this achieved level of modeling with all required details of the physical and numerical background with the reader. The book is intended to put advanced theoretical and numerical methods into the hands of modeling practitioners and scientists. It starts with a more general theory for all relevant flow and transport phenomena on the basis of the continuum approach, systematically develops the basic framework for important classes of problems (e.g., multiphase/multispecies non-isothermal flow and transport phenomena, discrete features, aquifer-averaged equations, geothermal processes), introduces finite-element techniques for solving the basic balance equations, in detail discusses advanced numerical algorithms for the resulting nonlinear and linear problems and completes with a number of benchmarks, applications and exercises to illustrate the different types of problems and ways to tackle them successfully (e.g., flow and seepage problems, unsaturated-saturated flow, advective-diffusion transport, saltwater intrusion, geothermal and thermohaline flow).
