Download or read book Modeling Electrical Characterization and Scaling Issues of Discrete trap Non volatile Memories written by Luca Vito Bruno Perniola and published by . This book was released on 2005 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: The PhD thesis, made in collaboration between the Institut National Polytechnique de Grenoble and the University of Pisa, had the final objective to characterise and model the special effects of discrete-trap non-volatile memories as nanocrystal, SONOS or NROM memories. We could develop a common analysis of some electrical features of these different architectures, like the programming window distribution, the "dual-bit" behavior and the data retention under different experimental conditions (initial write or test's temperature). The content of the PhD thesis is made of a part constituted by experimental results of electrical characterization of memories is presented, and another part constituted by the modelling results from analytical and numerical simulations, developed for the investigation of the scaling issues related to these types of memories.

Download or read book Characterization and Modeling of Advanced Charge Trapping Non Volatile Memories written by Vincenzo Della marca and published by . This book was released on 2013 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The silicon nanocrystal memories are one of the most attractive solutions to replace the Flash floating gate for nonvolatile memory embedded applications, especially for their high compatibility with CMOS process and the lower manufacturing cost. Moreover, the nanocrystal size guarantees a weak device-to-device coupling in an array configuration and, in addition, for this technology it has been shown the robustness against SILC. One of the main challenges for embedded memories in portable and contactless applications is to improve the energy consumption in order to reduce the design constraints. Today the application request is to use the Flash memories with both low voltage biases and fast programming operation. In this study, we present the state of the art of Flash floating gate memory cell and silicon nanocrystal memories. Concerning this latter device, we studied the effect of main technological parameters in order to optimize the cell performance. The aim was to achieve a satisfactory programming window for low energy applications. Furthermore, the silicon nanocrystal cell reliability has been investigated. We present for the first time a silicon nanocrystal memory cell with a good functioning after one million write/erase cycles, working on a wide range of temperature [-40°C; 150°C]. Moreover, ten years data retention at 150°C is extrapolated. Finally, the analysis concerning the current and energy consumption during the programming operation shows the opportunity to use the silicon nanocrystal cell for low power applications. All the experimental data have been compared with the results achieved on Flash floating gate memory, to show the performance improvement.

Download or read book Emerging Non volatile Memory Technologies written by Wen Siang Lew and published by Springer Nature. This book was released on 2021-01-09 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a balanced and comprehensive guide to the core principles, fundamental properties, experimental approaches, and state-of-the-art applications of two major groups of emerging non-volatile memory technologies, i.e. spintronics-based devices as well as resistive switching devices, also known as Resistive Random Access Memory (RRAM). The first section presents different types of spintronic-based devices, i.e. magnetic tunnel junction (MTJ), domain wall, and skyrmion memory devices. This section describes how their developments have led to various promising applications, such as microwave oscillators, detectors, magnetic logic, and neuromorphic engineered systems. In the second half of the book, the underlying device physics supported by different experimental observations and modelling of RRAM devices are presented with memory array level implementation. An insight into RRAM desired properties as synaptic element in neuromorphic computing platforms from material and algorithms viewpoint is also discussed with specific example in automatic sound classification framework.

Download or read book Flash Memories written by Paulo Cappelletti and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Flash memory is a Non Volatile Memory (NVM) whose "unit cells" are fabricated in CMOS technology and programmed and erased electrically. In 1971, Frohman-Bentchkowsky developed a folating polysilicon gate tran sistor [1, 2], in which hot electrons were injected in the floating gate and removed by either Ultra-Violet (UV) internal photoemission or by Fowler Nordheim tunneling. This is the "unit cell" of EPROM (Electrically Pro grammable Read Only Memory), which, consisting of a single transistor, can be very densely integrated. EPROM memories are electrically programmed and erased by UV exposure for 20-30 mins. In the late 1970s, there have been many efforts to develop an electrically erasable EPROM, which resulted in EEPROMs (Electrically Erasable Programmable ROMs). EEPROMs use hot electron tunneling for program and Fowler-Nordheim tunneling for erase. The EEPROM cell consists of two transistors and a tunnel oxide, thus it is two or three times the size of an EPROM. Successively, the combination of hot carrier programming and tunnel erase was rediscovered to achieve a single transistor EEPROM, called Flash EEPROM. The first cell based on this concept has been presented in 1979 [3]; the first commercial product, a 256K memory chip, has been presented by Toshiba in 1984 [4]. The market did not take off until this technology was proven to be reliable and manufacturable [5].

Download or read book Nanoscale MOS Transistors written by David Esseni and published by Cambridge University Press. This book was released on 2011-01-20 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written from an engineering standpoint, this book provides the theoretical background and physical insight needed to understand new and future developments in the modeling and design of n- and p-MOS nanoscale transistors. A wealth of applications, illustrations and examples connect the methods described to all the latest issues in nanoscale MOSFET design. Key areas covered include: • Transport in arbitrary crystal orientations and strain conditions, and new channel and gate stack materials • All the relevant transport regimes, ranging from low field mobility to quasi-ballistic transport, described using a single modeling framework • Predictive capabilities of device models, discussed with systematic comparisons to experimental results

Download or read book Three Dimensional Integrated Circuit Design written by Vasilis F. Pavlidis and published by Newnes. This book was released on 2017-07-04 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Dimensional Integrated Circuit Design, Second Eition, expands the original with more than twice as much new content, adding the latest developments in circuit models, temperature considerations, power management, memory issues, and heterogeneous integration. 3-D IC experts Pavlidis, Savidis, and Friedman cover the full product development cycle throughout the book, emphasizing not only physical design, but also algorithms and system-level considerations to increase speed while conserving energy. A handy, comprehensive reference or a practical design guide, this book provides effective solutions to specific challenging problems concerning the design of three-dimensional integrated circuits. Expanded with new chapters and updates throughout based on the latest research in 3-D integration: - Manufacturing techniques for 3-D ICs with TSVs - Electrical modeling and closed-form expressions of through silicon vias - Substrate noise coupling in heterogeneous 3-D ICs - Design of 3-D ICs with inductive links - Synchronization in 3-D ICs - Variation effects on 3-D ICs - Correlation of WID variations for intra-tier buffers and wires - Offers practical guidance on designing 3-D heterogeneous systems - Provides power delivery of 3-D ICs - Demonstrates the use of 3-D ICs within heterogeneous systems that include a variety of materials, devices, processors, GPU-CPU integration, and more - Provides experimental case studies in power delivery, synchronization, and thermal characterization

Download or read book In Search of the Next Memory written by Roberto Gastaldi and published by Springer. This book was released on 2017-03-07 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides students and practicing chip designers with an easy-to-follow yet thorough, introductory treatment of the most promising emerging memories under development in the industry. Focusing on the chip designer rather than the end user, this book offers expanded, up-to-date coverage of emerging memories circuit design. After an introduction on the old solid-state memories and the fundamental limitations soon to be encountered, the working principle and main technology issues of each of the considered technologies (PCRAM, MRAM, FeRAM, ReRAM) are reviewed and a range of topics related to design is explored: the array organization, sensing and writing circuitry, programming algorithms and error correction techniques are reviewed comparing the approach followed and the constraints for each of the technologies considered. Finally the issue of radiation effects on memory devices has been briefly treated. Additionally some considerations are entertained about how emerging memories can find a place in the new memory paradigm required by future electronic systems. This book is an up-to-date and comprehensive introduction for students in courses on memory circuit design or advanced digital courses in VLSI or CMOS circuit design. It also serves as an essential, one-stop resource for academics, researchers and practicing engineers.

Download or read book Phase Change Materials written by Simone Raoux and published by Springer Science & Business Media. This book was released on 2010-06-10 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Phase Change Materials: Science and Applications" provides a unique introduction of this rapidly developing field. Clearly written and well-structured, this volume describes the material science of these fascinating materials from a theoretical and experimental perspective. Readers will find an in-depth description of their existing and potential applications in optical and solid state storage devices as well as reconfigurable logic applications. Researchers, graduate students and scientists with an interest in this field will find "Phase Change Materials" to be a valuable reference.

Download or read book Functional Metal Oxide Nanostructures written by Junqiao Wu and published by Springer Science & Business Media. This book was released on 2011-09-22 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal oxides and particularly their nanostructures have emerged as animportant class of materials with a rich spectrum of properties and greatpotential for device applications. In this book, contributions from leadingexperts emphasize basic physical properties, synthesis and processing, and thelatest applications in such areas as energy, catalysis and data storage. Functional Metal Oxide Nanostructuresis an essential reference for any materials scientist or engineer with aninterest in metal oxides, and particularly in recent progress in defectphysics, strain effects, solution-based synthesis, ionic conduction, and theirapplications.

Download or read book Atomic Layer Deposition for Semiconductors written by Cheol Seong Hwang and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering thorough coverage of atomic layer deposition (ALD), this book moves from basic chemistry of ALD and modeling of processes to examine ALD in memory, logic devices and machines. Reviews history, operating principles and ALD processes for each device.

Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.

Download or read book Semiconductor Memories written by Ashok K. Sharma and published by Wiley-IEEE Press. This book was released on 2002-09-10 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Memories provides in-depth coverage in the areas of design for testing, fault tolerance, failure modes and mechanisms, and screening and qualification methods including. * Memory cell structures and fabrication technologies. * Application-specific memories and architectures. * Memory design, fault modeling and test algorithms, limitations, and trade-offs. * Space environment, radiation hardening process and design techniques, and radiation testing. * Memory stacks and multichip modules for gigabyte storage.

Download or read book Random Telegraph Signals in Semiconductor Devices written by Eddy Simoen and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Following their first observation in 1984, random telegraph signals (RTSs) were initially a purely scientific tool to study fundamental aspects of defects in semiconductor devices. As semiconductor devices move to the nanoscale however, RTSs have become an issue of major concern to the semiconductor industry, both in development of current technology, such as memory devices and logic circuits, as well as in future semiconductor devices beyond the silicon roadmap, such as nanowire, TFET and carbon nanotube-based devices. It has become clear that the reliability of state-of-the-art and future CMOS technology nodes is dominated by RTS and single trap phenomena, and so its understanding is of vital importance for the modelling and simulation of the operation and the expected lifetime of CMOS devices and circuits. It is the aim of this book to provide a comprehensive and up-to-date review of one of the most challenging issues facing the semiconductor industry, from the fundamentals of RTSs to applied technology."--Prové de l'editor.

Download or read book Nonvolatile Memory Technologies with Emphasis on Flash written by Joe Brewer and published by John Wiley & Sons. This book was released on 2011-09-23 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented here is an all-inclusive treatment of Flash technology, including Flash memory chips, Flash embedded in logic, binary cell Flash, and multilevel cell Flash. The book begins with a tutorial of elementary concepts to orient readers who are less familiar with the subject. Next, it covers all aspects and variations of Flash technology at a mature engineering level: basic device structures, principles of operation, related process technologies, circuit design, overall design tradeoffs, device testing, reliability, and applications.

Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.

Download or read book Emerging Non Volatile Memories written by Seungbum Hong and published by Springer. This book was released on 2014-11-18 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the fundamentals of emerging non-volatile memories and provides an overview of future trends in the field. Readers will find coverage of seven important memory technologies, including Ferroelectric Random Access Memory (FeRAM), Ferromagnetic RAM (FMRAM), Multiferroic RAM (MFRAM), Phase-Change Memories (PCM), Oxide-based Resistive RAM (RRAM), Probe Storage, and Polymer Memories. Chapters are structured to reflect diffusions and clashes between different topics. Emerging Non-Volatile Memories is an ideal book for graduate students, faculty, and professionals working in the area of non-volatile memory. This book also: Covers key memory technologies, including Ferroelectric Random Access Memory (FeRAM), Ferromagnetic RAM (FMRAM), and Multiferroic RAM (MFRAM), among others. Provides an overview of non-volatile memory fundamentals. Broadens readers’ understanding of future trends in non-volatile memories.

Download or read book Computer Organization and Design RISC V Edition written by David A. Patterson and published by Morgan Kaufmann. This book was released on 2017-05-12 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new RISC-V Edition of Computer Organization and Design features the RISC-V open source instruction set architecture, the first open source architecture designed to be used in modern computing environments such as cloud computing, mobile devices, and other embedded systems. With the post-PC era now upon us, Computer Organization and Design moves forward to explore this generational change with examples, exercises, and material highlighting the emergence of mobile computing and the Cloud. Updated content featuring tablet computers, Cloud infrastructure, and the x86 (cloud computing) and ARM (mobile computing devices) architectures is included. An online companion Web site provides advanced content for further study, appendices, glossary, references, and recommended reading. - Features RISC-V, the first such architecture designed to be used in modern computing environments, such as cloud computing, mobile devices, and other embedded systems - Includes relevant examples, exercises, and material highlighting the emergence of mobile computing and the cloud