Download or read book INDEPENDENT METERING SYSTEM WITH ELECTRO HYDRAULIC CONTROL written by Min Cheng and published by Springer Nature. This book was released on 2024 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows an independent metering electro-hydraulic control system involving its flexible hardware layouts, complex software control, representative products and applications. The book includes one chapter introducing the background and motivation of the independent metering electro-hydraulic control system. It also includes one chapter to summarize various hardware layouts involving the utilized hydraulic components and circuits, as well as analyze their advantages and disadvantages. It emphatically consists of four chapters demonstrating the detailed multivariable control strategies from three levels: load, valve and pump, together with fault-tolerant control under the fault condition. It includes a last chapter, in which products of independent metering control valve and their applications in some typical heavy-duty mobile machinery are collective works of reviews illustrative of recent advances. This book is interesting and useful to a wide readership in the various fields of fluid power transmission and control.

Download or read book Proceedings of the ASME Fluid Power Systems and Technology Division written by and published by . This book was released on 2005 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Data Digest written by and published by . This book was released on 1947 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control Strategies for Dynamic Systems written by John H. Lumkes, Jr. and published by CRC Press. This book was released on 2001-12-13 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a unified modeling approach to demonstrate the common components inherent in all physical systems, Control Strategies for Dynamic Systems comprehensively covers the theory, design, and implementation of analog, digital, and advanced control systems for electronic, aeronautical, automotive, and industrial applications. Detailing advanced tools and strategies used to analyze controller performance, the book summarizes hardware and software utilization; frequency response and root locus methods; the evaluation of PID, phase-lag, and phase-lead controllers; and the effect of disturbances and command inputs on steady-state errors. It also includes numerous case studies and MATLAB® examples.

Download or read book Confidential Documents written by United States. Army Air Forces and published by . This book was released on 1947-07 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydraulic Control Systems written by Herbert E. Merritt and published by John Wiley & Sons. This book was released on 1991-09-03 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of hydraulic control is rapidly growing and the objective of this book is to present a rational and well-balanced treatment of its components and systems. Coverage includes a review of applicable topics in fluid mechanisms; components encountered in hydraulic servo controlled systems; systems oriented issues and much more. Also offers practical suggestions concerning testing and limit cycle oscillation problems.

Download or read book Hydraulic Power System Analysis written by Arthur Akers and published by CRC Press. This book was released on 2006-04-17 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The excitement and the glitz of mechatronics has shifted the engineering community's attention away from fluid power systems in recent years. However, fluid power still remains advantageous in many applications compared to electrical or mechanical power transmission methods. Designers are left with few practical resources to help in the design and

Download or read book Hydraulic Control Systems written by Noah Manring and published by John Wiley & Sons. This book was released on 2005-04-15 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique resource that demystifies the physical basics of hydraulic systems Hydraulic Control Systems offers students and professionals a reliable, complete volume of the most up-to-date hows and whys of today's hydraulic control system fundamentals. Complete with insightful industry examples, it features the latest coverage of modeling and control systems with a widely accepted approach to systems design. Hydraulic Control Systems is a powerful tool for developing a solid understanding of hydraulic control systems that will serve the practicing engineer in the field. Throughout the book, illustrative case studies highlight important topics and demonstrate how equations can be implemented and used in the real world. Featuring exercise problems at the end of every chapter, Hydraulic Control Systems presents: A useful review of fluid mechanics and system dynamics Thorough analysis of transient fluid flow forces within valves Discussions of flow ripple for both gear pumps and axial piston pumps Updated analysis of the pump control problems associated with swash plate type machines A successful methodology for hydraulic system design—starting from the load point of the system and working backward to the ultimate power source Reduced-order models and PID controllers showing control objectives of position, velocity, and effort

Download or read book Liquid Rocket Valve Components written by H. J. Ellis and published by . This book was released on 1973 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Valve Selection Handbook written by Peter Smith and published by Elsevier. This book was released on 2004-01-24 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valves are the components in a fluid flow or pressure system that regulate either the flow or the pressure of the fluid. They are used extensively in the process industries, especially petrochemical. Though there are only four basic types of valves, there is an enormous number of different kinds of valves within each category, each one used for a specific purpose. No other book on the market analyzes the use, construction, and selection of valves in such a comprehensive manner. - Covers new environmentally-conscious equipment and practices, the most important hot-button issue in the petrochemical industry today - Details new generations of valves for offshore projects, the oil industry's fastest-growing segment - Includes numerous new products that have never before been written about in the mainstream literature

Download or read book Pneumatic Drives written by Peter Beater and published by Springer Science & Business Media. This book was released on 2007-02-23 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the whole range of today’s technology for pneumatic drives. It details drives for factory automation and automotive applications as well as describes the technology for the process industry like positioners or spring-and-diaphragm. In addition, the book examines several control strategies like binary mode cylinder drives or position controlled drives and computer aided analysis of complex systems.

Download or read book Gas Turbine Propulsion Systems written by Bernie MacIsaac and published by John Wiley & Sons. This book was released on 2011-08-29 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Major changes in gas turbine design, especially in the design and complexity of engine control systems, have led to the need for an up to date, systems-oriented treatment of gas turbine propulsion. Pulling together all of the systems and subsystems associated with gas turbine engines in aircraft and marine applications, Gas Turbine Propulsion Systems discusses the latest developments in the field. Chapters include aircraft engine systems functional overview, marine propulsion systems, fuel control and power management systems, engine lubrication and scavenging systems, nacelle and ancillary systems, engine certification, unique engine systems and future developments in gas turbine propulsion systems. The authors also present examples of specific engines and applications. Written from a wholly practical perspective by two authors with long careers in the gas turbine & fuel systems industries, Gas Turbine Propulsion Systems provides an excellent resource for project and program managers in the gas turbine engine community, the aircraft OEM community, and tier 1 equipment suppliers in Europe and the United States. It also offers a useful reference for students and researchers in aerospace engineering.

Download or read book The Shock Absorber Handbook written by John C. Dixon and published by John Wiley & Sons. This book was released on 2008-02-28 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every one of the many millions of cars manufactured annually worldwide uses shock absorbers, otherwise known as dampers. These form a vital part of the suspension system of any vehicle, essential for optimizing road holding, performance and safety. This, the second edition of the Shock Absorber Handbook (first edition published in 1999), remains the only English language book devoted to the subject. Comprehensive coverage of design, testing, installation and use of the damper has led to the book's acceptance as the authoritative text on the automotive applications of shock absorbers. In this second edition, the author presents a thorough revision of his book to bring it completely up to date. There are numerous detail improvements, and extensive new material has been added particularly on the many varieties of valve design in the conventional hydraulic damper, and on modern developments such as electrorheological and magnetorheological dampers. "The Shock Absorber Handbook, 2nd Edition" provides a thorough treatment of the issues surrounding the design and selection of shock absorbers. It is an invaluable handbook for those working in industry, as well as a principal reference text for students of mechanical and automotive engineering.

Download or read book Airframe and Powerplant Mechanics Airframe Handbook written by United States. Flight Standards Service and published by . This book was released on 1976 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fluid Power Control written by Ahmed Abu Hanieh and published by . This book was released on 2012 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the existing books in this field discuss the hydraulic and pneumatic systems in concentrating on the design and components of the system without going deep enough into the problem of dynamic modelling and control of these systems. This book attempts to compromise between theoretical modelling and practical understanding of fluid power systems by using modern control theory based on implementing Newton's second law in second order differential equations transformed into direct relationships between inputs and outputs via transfer functions or state space approach.

Download or read book Design News written by and published by . This book was released on 1998 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stepping Motors and Their Microprocessor Controls written by Takashi Kenjō and published by Oxford University Press. This book was released on 1994 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stepping motors are used wherever repeated stop-start or intermittent motions are encountered. Found in a diverse range of machines such as clocks, typewriters, automatic draughting machines, numerically controlled machine tools, and computer peripherals, stepping motors offer easy compatibility with digital equipment and ease of control. This thoroughly updated second edition of Stepping Motors offers a practical approach to the subject and relates the workings, design, and construction of these motors to underlying electromagnetic principles. The reader is taken through a brief history of stepping-motor development and is provided with expert treatments of the theory, terminology, control systems, and likely applications associated with the devices. The text is copiously illustrated with clear and helpful diagrams and contains much detailed information. It is the perfect introduction for students and professionals in electrical and electronic engineering.