Download or read book Materials for Ultra Supercritical and Advanced Ultra Supercritical Power Plants written by Augusto Di Gianfrancesco and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants provides researchers in academia and industry with an essential overview of the stronger high-temperature materials required for key process components, such as membrane wall tubes, high-pressure steam piping and headers, superheater tubes, forged rotors, cast components, and bolting and blading for steam turbines in USC power plants. Advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels, are also addressed. Chapters on international research directions complete the volume. The transition from conventional subcritical to supercritical thermal power plants greatly increased power generation efficiency. Now the introductions of the ultra-supercritical (USC) and, in the near future, advanced ultra-supercritical (A-USC) designs are further efforts to reduce fossil fuel consumption in power plants and the associated carbon dioxide emissions. The higher operating temperatures and pressures found in these new plant types, however, necessitate the use of advanced materials. - Provides researchers in academia and industry with an authoritative and systematic overview of the stronger high-temperature materials required for both ultra-supercritical and advanced ultra-supercritical power plants - Covers materials for critical components in ultra-supercritical power plants, such as boilers, rotors, and turbine blades - Addresses advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels - Includes chapters on technologies for welding technologies

Download or read book Joint EPRI 123HiMAT International Conference on Advances in High Temperature Materials written by J. Shingledecker and published by ASM International. This book was released on 2019-10-01 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings from: EPRI’s 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials

Download or read book Superalloys 2020 written by Sammy Tin and published by Springer Nature. This book was released on 2020-08-28 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Symposium on Superalloys (Superalloys 2020) highlights technologies for lifecycle improvement of superalloys. In addition to the traditional focus areas of alloy development, processing, mechanical behavior, coatings, and environmental effects, this volume includes contributions from academia, supply chain, and product-user members of the superalloy community that highlight technologies that contribute to improving manufacturability, affordability, life prediction, and performance of superalloys.

Download or read book Materials for High Temperature Power Generation and Process Plant Applications written by A. Strang and published by CRC Press. This book was released on 2000 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 2001. Routledge is an imprint of Taylor & Francis, an informa company.

Download or read book Advances in Steam Turbines for Modern Power Plants written by Tadashi Tanuma and published by Woodhead Publishing. This book was released on 2017-02-15 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Steam Turbines for Modern Power Plants provides an authoritative review of steam turbine design optimization, analysis and measurement, the development of steam turbine blades, and other critical components, including turbine retrofitting and steam turbines for renewable power plants. As a very large proportion of the world's electricity is currently generated in systems driven by steam turbines, (and will most likely remain the case in the future) with steam turbines operating in fossil-fuel, cogeneration, combined cycle, integrated gasification combined cycle, geothermal, solar thermal, and nuclear plants across the world, this book provides a comprehensive assessment of the research and work that has been completed over the past decades. - Presents an in-depth review on steam turbine design optimization, analysis, and measurement - Written by a range of experts in the area - Provides an overview of turbine retrofitting and advanced applications in power generation

Download or read book Damage Mechanisms and Life Assessment of High Temperature Components written by Ramaswamy Viswanathan and published by ASM International. This book was released on 1989 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ultra Supercritical Coal Power Plants written by Dongke Zhang FTSE and published by Elsevier. This book was released on 2013-08-31 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continued use of coal as a means of generating electricity and an increasing demand for cleaner, more efficient energy production has led to advances in power plant technology. Ultra-supercritical coal power plants reviews the engineering, operation, materials and performance of ultra-supercritical coal power plants.Following a chapter introducing advanced and ultra-supercritical coal power plants, part one goes on to explore the operating environments, materials and engineering of ultra-supercritical coal power plants. Chapters discuss the impacts of steam conditions on plant materials and operation, fuel considerations and burner design, and materials and design for boilers working under supercritical steam conditions. Chapters in part two focus on improving ultra-supercritical coal power plant performance and operability. Ash fouling, deposition and slagging in ultra-supercritical coal power plants are highlighted along with pollution control measures and the estimation, management and extension of the life of ultra-supercritical power plants. Further chapters provide an economic and engineering analysis of a 700°C advanced ultra-supercritical pulverised coal power plant and discuss CO2 capture-ready ultra-supercritical coal power plants.Ultra-supercritical coal power plants is a comprehensive technical reference for power plant operators and engineers, high-temperature materials scientists, professionals in the power industry who require an understanding of ultra-supercritical coal power plants and researchers and academics interested in the field. - Provides a comprehensive reference on the developments, materials, design and operation of ultra-supercritical power plant - Considers the degradation issues affecting this type of plant, as well as emissions control and CO2 capture technology; improved plant controls critical to improved operation and environmental performance - Contains operational assessments for plant safety, plant life management, and plant economics

Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. - Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers - A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field - The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems

Download or read book Creep Resistant Steels written by Fujio Abe and published by Elsevier. This book was released on 2008-03-14 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep-resistant steels are widely used in the petroleum, chemical and power generation industries. Creep-resistant steels must be reliable over very long periods of time at high temperatures and in severe environments. Understanding and improving long-term creep strength is essential for safe operation of plant and equipment. This book provides an authoritative summary of key research in this important area.The first part of the book describes the specifications and manufacture of creep-resistant steels. Part two covers the behaviour of creep-resistant steels and methods for strengthening them. The final group of chapters analyses applications in such areas as turbines and nuclear reactors.With its distinguished editors and international team of contributors, Creep-resistant steels is a valuable reference for the power generation, petrochemical and other industries which use high strength steels at elevated temperatures. - Describes the specifications and manufacture of creep-resistant steels - Strengthening methods are discussed in detail - Different applications are analysed including turbines and nuclear reactors

Download or read book Energy and Power Generation Handbook written by K. R. Rao and published by American Society of Mechanical Engineers. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers aspects of power generation from all known sources of energy that are in use around the globe. It contains power and energy sources such as solar, wind, hydro, tidal and wave power, bio energy including bio-mass and bio-fuels, waste-material, geothermal, fossil, petroleum, gas and nuclear. Experts were also invited to cover the role of nano-technology and the role of NASA in photovoltaic and wind energy in power generation.

Download or read book Materials for High Temperature Engineering Applications written by G.W. Meetham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise survey describes the requirements on materials operating in high-temperature environments and the processes that increase the temperature capability of metals, ceramics, and composites. The major part deals with the applicable materials and their specific properties, with one entire chapter devoted to coatings. Written for engineering and science students, researchers, and managers in industry.

Download or read book Materials for Advanced Power Engineering 1994 written by D. Coutsouradis and published by Springer Science & Business Media. This book was released on 1994 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: The role of energy in the modern world goes beyond mere technology and economics to influence welfare, the environment, the quality of life and, in broad terms, civilization itself. Since the Industrial Revolution, energy conservation technology has been at the forefront of the innovation required to satisfy the needs of mankind and, more than any other, this technology has always depended on the performance of the materials used.

Download or read book High Temperature Creep fatigue written by Ryuichi Ohtani and published by . This book was released on 1988 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Superalloys written by Roger C. Reed and published by Cambridge University Press. This book was released on 2008-07-31 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superalloys are unique high-temperature materials used in gas turbine engines, which display excellent resistance to mechanical and chemical degradation. This book introduces the metallurgical principles which have guided their development. Suitable for graduate students and researchers, it includes exercises and additional resources at www.cambridge.org/9780521859042.

Download or read book Gas Turbines for Electric Power Generation written by S. Can Gülen and published by Cambridge University Press. This book was released on 2019-02-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything you wanted to know about industrial gas turbines for electric power generation in one source with hard-to-find, hands-on technical information.

Download or read book Application of Compact Heat Exchangers For Combined Cycle Driven Efficiency In Next Generation Nuclear Power Plants written by Bahman Zohuri and published by Springer. This book was released on 2015-11-19 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamentals of combined-cycle plants to provide background for understanding the progressive design approaches at the heart of the text Discusses the types of compact heat exchanger surfaces, suggesting novel designs that can be considered for optimal cost effectiveness and maximum energy production Undertakes the thermal analysis of these compact heat exchangers throughout the life cycle, from the design perspective through operational and safety assurance stages This book describes the quest to create novel designs for compact heat exchangers in support of emergent combined cycle nuclear plants. The text opens with a concise explanation of the fundamentals of combined cycles, describing their efficiency impacts on electrical power generation systems. It then covers the implementation of these principles in nuclear reactor power systems, focusing on the role of compact heat exchangers in the combined cycle loop and applying them to the challenges facing actual nuclear power systems. The various types of compact heat exchanger surfaces and designs are given thorough consideration before the author turns his attention to discussing current and projected reactor systems, and how the novel design of these compact heat e xchangers can be applied to innovative designs, operation and safety analyses to optimize thermal efficiency. The book is written at an undergraduate level, but will be useful to practicing engineers and scientists as well.

Download or read book High Temperature Surface Engineering written by David S. Rickerby and published by CRC Press. This book was released on 2000 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Surface Engineering, the Proceedings of the Sixth International Conference in the Series 'Engineering the Surfaces', reviews the surfacing technologies appropriate to oxidation, corrosion and thermal protection. This book will be a valuable reference guide for Engineers and Material Scientists.