Download or read book Modeling and Testing of an Instantaneous Overcurrent Relay Using VTB and VTB RT written by Daxe Patel and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis explores the application of the Virtual Test Bed (VTB) and its real-time extension, VTB-RT, for protective relay modeling, simulation, and testing. An instantaneous overcurrent relay model was developed in VTB for a transmission line protection. The same relay model was built in Matlab/Simulink for validation purposes. Both models were tested for various fault conditions on a radial power system and results were compared. Moreover, a low cost real-time Hardware-In-the-Loop (HIL) simulation platform was implemented for relay model testing using VTB-RT and public domain software packages such as Real-Time Application Interface (RTAI), Comedi, and Comedilib, and notebook computer hardware. The applicability of VTB-RT was verified through an open-loop simulation and a HIL simulation of a simple dynamic system using dSPACE as the control hardware and NI DAQCard-6062E as the input/output interface. Simulation results are presented showing the effectiveness of the VTB-RT platform for model testing.
Download or read book MODELING AND TESTING OF AN INSTANTANEOUS OVERCURRENT RELAY USING VTB AND VTB RT written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis explores the application of the Virtual Test Bed (VTB) and its real-time extension, VTB-RT, for protective relay modeling, simulation, and testing. An instantaneous overcurrent relay model was developed in VTB for a transmission line protection. The same relay model was built in Matlab/Simulink for validation purposes. Both models were tested for various fault conditions on a radial power system and results were compared. Moreover, a low cost real-time Hardware-In-the-Loop (HIL) simulation platform was implemented for relay model testing using VTB-RT and public domain software packages such as Real-Time Application Interface (RTAI), Comedi, and Comedilib, and notebook computer hardware. The applicability of VTB-RT was verified through an open-loop simulation and a HIL simulation of a simple dynamic system using dSPACE as the control hardware and NI DAQCard-6062E as the input/output interface. Simulation results are presented showing the effectiveness of the VTB-RT platform for model testing.
Download or read book The Relay Testing Handbook 6D written by Chris Werstiuk and published by Valence Electrical Training Services LLC. This book was released on 2009-08 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: As modern protective relays become increasingly more powerful and complex, many relay testers continue to use test procedures and philosophies that are based on previous generations of relays and their limitations. Modern relays have very different characteristics that require a different testing philosophy to ensure that they will operate when required. The Relay Testing Handbook: Testing Overcurrent Protection (50/51/67) provides step-by-step procedures for testing the most common overcurrent protection applications. This volume is designed to help you understand and test: Instantaneous overcurrent protection (50) Inverse time overcurrent protection (51) Directional overcurrent protection (67) Each chapter explains the following topics for each element with realistic, practical examples and detailed instructions: Understanding the application Determining which settings are most important Recommended steps to correctly plan, perform, and evaluate pickup tests Recommended steps to correctly plan, perform, and evaluate timing tests Preventing interference from other settings inside the relay Tips and tricks to overcome common obstacles This book is included in the hardcover book The Relay Testing Handbook: Principles and Practice, or it can be ordered by itself as a soft-cover book, Adobe Acrobat PDF digital download, or both. Paperback: 70 pages Trim Size: 8.5"x11" Publisher: Valence Electrical Training Services LLC Language: English ISBN-13: 978-1-934348-13-0 LCCN: 2012934622
Download or read book Microgrids and Active Distribution Networks written by Sunetra Chowdhury and published by IET. This book was released on 2009-06-24 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microgrids and Active Distribution Networks offer a potential solution for sustainable, energy-efficient power supply to cater for increasing load growth, supplying power to remote areas, generation of clean power and reduction in emission of greenhouse gases & particulates as per Kyoto protocol.
Download or read book Noise Reduction Techniques in Electronic Systems written by Henry W. Ott and published by Wiley-Interscience. This book was released on 1988-03-23 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated and expanded version of the very successful first edition offers new chapters on controlling the emission from electronic systems, especially digital systems, and on low-cost techniques for providing electromagnetic compatibility (EMC) for consumer products sold in a competitive market. There is also a new chapter on the susceptibility of electronic systems to electrostatic discharge. There is more material on FCC regulations, digital circuit noise and layout, and digital circuit radiation. Virtually all the material in the first edition has been retained. Contains a new appendix on FCC EMC test procedures.
Download or read book Advances in Communication Devices and Networking written by Rabindranath Bera and published by Springer. This book was released on 2019-02-15 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers recent trends in the field of devices, wireless communication and networking. It presents the outcomes of the International Conference in Communication, Devices and Networking (ICCDN 2018), which was organized by the Department of Electronics and Communication Engineering, Sikkim Manipal Institute of Technology, Sikkim, India on 2–3 June, 2018. Gathering cutting-edge research papers prepared by researchers, engineers and industry professionals, it will help young and experienced scientists and developers alike to explore new perspectives, and offer them inspirations on addressing real-world problems in the field of electronics, communication, devices and networking.
Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Elsevier. This book was released on 2010-07-19 with total page 1189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics, which is a rapidly growing area in terms of research and applications, uses modern electronics technology to convert electric power from one form to another, such as ac-dc, dc-dc, dc-ac, and ac-ac with a variable output magnitude and frequency. Power electronics has many applications in our every day life such as air-conditioners, electric cars, sub-way trains, motor drives, renewable energy sources and power supplies for computers. This book covers all aspects of switching devices, converter circuit topologies, control techniques, analytical methods and some examples of their applications. * 25% new content* Reorganized and revised into 8 sections comprising 43 chapters* Coverage of numerous applications, including uninterruptable power supplies and automotive electrical systems* New content in power generation and distribution, including solar power, fuel cells, wind turbines, and flexible transmission
Download or read book Protective Relaying written by J. Lewis Blackburn and published by CRC Press. This book was released on 2014-02-11 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years, Protective Relaying: Principles and Applications has been the go-to text for gaining proficiency in the technological fundamentals of power system protection. Continuing in the bestselling tradition of the previous editions by the late J. Lewis Blackburn, the Fourth Edition retains the core concepts at the heart of power system analysis. Featuring refinements and additions to accommodate recent technological progress, the text: Explores developments in the creation of smarter, more flexible protective systems based on advances in the computational power of digital devices and the capabilities of communication systems that can be applied within the power grid Examines the regulations related to power system protection and how they impact the way protective relaying systems are designed, applied, set, and monitored Considers the evaluation of protective systems during system disturbances and describes the tools available for analysis Addresses the benefits and problems associated with applying microprocessor-based devices in protection schemes Contains an expanded discussion of intertie protection requirements at dispersed generation facilities Providing information on a mixture of old and new equipment, Protective Relaying: Principles and Applications, Fourth Edition reflects the present state of power systems currently in operation, making it a handy reference for practicing protection engineers. And yet its challenging end-of-chapter problems, coverage of the basic mathematical requirements for fault analysis, and real-world examples ensure engineering students receive a practical, effective education on protective systems. Plus, with the inclusion of a solutions manual and figure slides with qualifying course adoption, the Fourth Edition is ready-made for classroom implementation.
Download or read book Advanced Solutions in Power Systems written by Mircea Eremia and published by John Wiley & Sons. This book was released on 2016-09-27 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides insight on both classical means and new trends in the application of power electronic and artificial intelligence techniques in power system operation and control This book presents advanced solutions for power system controllability improvement, transmission capability enhancement and operation planning. The book is organized into three parts. The first part describes the CSC-HVDC and VSC-HVDC technologies, the second part presents the FACTS devices, and the third part refers to the artificial intelligence techniques. All technologies and tools approached in this book are essential for power system development to comply with the smart grid requirements. Discusses detailed operating principles and diagrams, theory of modeling, control strategies and physical installations around the world of HVDC and FACTS systems Covers a wide range of Artificial Intelligence techniques that are successfully applied for many power system problems, from planning and monitoring to operation and control Each chapter is carefully edited, with drawings and illustrations that helps the reader to easily understand the principles of operation or application Advanced Solutions in Power Systems: HVDC, FACTS, and Artificial Intelligence is written for graduate students, researchers in transmission and distribution networks, and power system operation. This book also serves as a reference for professional software developers and practicing engineers.
Download or read book Protective Relaying written by Walter A. Elmore and published by CRC Press. This book was released on 2003-09-09 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Targeting the latest microprocessor technologies for more sophisticated applications in the field of power system short circuit detection, this revised and updated source imparts fundamental concepts and breakthrough science for the isolation of faulty equipment and minimization of damage in power system apparatus. The Second Edition clearly describes key procedures, devices, and elements crucial to the protection and control of power system function and stability. It includes chapters and expertise from the most knowledgeable experts in the field of protective relaying, and describes microprocessor techniques and troubleshooting strategies in clear and straightforward language.
Download or read book Electric Cables Handbook written by BICC Cables Ltd and published by Wiley-Blackwell. This book was released on 1997-12-08 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Cables Handbook provides a comprehensive and substantial coverage of all types of energy cables--from wiring and flexible cables for general use, to distribution, transmission and submarine cables. It includes information on materials, design principles, installation, operating experience and standards, and several appendices contain extensive data tables on commonly used cable types and their properties. Electric Cables Handbook is an extensive source of up-to-date and essential information for electrical engineers, contractors, supply authorities and cable manufacturers.
Download or read book Computer Relaying for Power Systems written by Arun G. Phadke and published by John Wiley & Sons. This book was released on 2009-07-20 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since publication of the first edition of Computer Relaying for Power Systems in 1988, computer relays have been widely accepted by power engineers throughout the world and in many countries they are now the protective devices of choice. The authors have updated this new edition with the latest developments in technology and applications such as adaptive relaying, wide area measurements, signal processing, new GPS-based measurement techniques and the application of artificial intelligence to digital relays. New material also includes sigma-delta and oversampling A/D converters, self-polarizing and cross-polarizing in transmission lines protection and optical current and voltage transformers. Phadke and Thorp have been working together in power systems engineering for more than 30 years. Their impressive work in the field has been recognized by numerous awards, including the prestigious 2008 Benjamin Franklin Medal in Electrical Engineering for their pioneering contributions to the development and application of microprocessor controllers in electric power systems. Provides the student with an understanding of computer relaying Authored by international authorities in computer relaying Contents include relaying practices, mathematical basis for protective relaying algorithms, transmission line relaying, protection of transformers, machines and buses, hardware organization in integrated systems, system relaying and control, and developments in new relaying principles Features numerous solved examples to explain several of the more complex topics, as well as a problem at the end of each chapter Includes an updated list of references and a greatly expanded subject index.
Download or read book FACTS Controllers written by K. R PADIYAR and published by . This book was released on 2020-10 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Key Features:Concepts are explained with illustrative examples and case studies. Applications of SVC, TCSC, GCSC, SPST, STATCOM, SSSC, UPFC, IPFC and IPC for voltage/power control in transmission systems. Application of DSTATCOM, DVR and UPQC for improving power quality in distribution systems. Design of Power Oscillation Damping (POD) controllers. Mitigation of SSR using series FACTS Controllers. About the Book:The emerging technology of Flexible AC Transmission System (FACTS) enables planning and operation of power systems at minimum cost, without compromising security. This is based on modern high power electronic systems that provide fast controllability to ensure 'flexible' operation under changing system conditions. This book presents a comprehensive treatment of the subject by discussing the operating principles, mathematical models, control design and issues that affect the applications.
Download or read book Advances in Smart Grid and Renewable Energy written by Karma Sonam Sherpa and published by Springer Nature. This book was released on 2021-01-04 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the international conference ETAEERE 2020, and primarily focuses on renewable energy resources and smart grid technologies. The book provides valuable information on the technology and design of power grid integration on microgrids of green energy sources. Some of the topics covered include solar PV array, hybrid microgrid, daylight harvesting, green computing, photovoltaic applications, nanogrid applications, AC/DC/AC converter for wind energy systems, solar photovoltaic panels, PEM fuel cell system, and biogas run dual-fueled diesel engine. The contents of this book will be useful for researchers and practitioners working in the areas of smart grids and renewable energy generation, distribution, and management.
Download or read book Second NASA Aerospace Pyrotechnic Systems Workshop written by and published by . This book was released on 1994 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Network Protection Automation Guide written by and published by . This book was released on 2002 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wide Area Monitoring Protection and Control Systems written by Alfredo Vaccaro and published by IET. This book was released on 2016-08-04 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wide area monitoring, protection and control systems (WAMPACs) have been recognized as the most promising enabling technologies to meet challenges of modern electric power transmission systems, where reliability, economics, environmental and other social objectives must be balanced to optimize the grid assets and satisfy growing electrical demand. To this aim WAMPAC requires precise phasor and frequency information, which are acquired by deploying multiple time synchronized sensors, known as Phasor Measurement Units (PMUs), providing precise synchronized information about voltage and current phasors, frequency and rate-of-change-of-frequency.
