Download or read book Modeling and Simulation in Thermal and Fluids Engineering written by Krishnan Murugesan and published by CRC Press. This book was released on 2022-07-29 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook comprehensively covers the fundamentals behind mathematical modeling of engineering problems to obtain the required solution. It comprehensively discusses modeling concepts through conservation principles with a proper blending of mathematical expressions. The text discusses the basics of governing equations in algebraic and differential forms and examines the importance of mathematics as a tool in modeling. It covers important topics including modeling of heat transfer problems, modeling of flow problems, modeling advection-diffusion problems and Navier-Stokes equations in depth. Pedagogical features including solved problems and unsolved exercises are interspersed throughout the text for better understanding. The textbook is primarily written for senior undergraduate and graduate students in the field of mechanical engineering for courses on modeling and simulation. The textbook will be accompanied by teaching resource including a solution manual for the instructors.
Download or read book Modeling and Simulation in Thermal and Fluids Engineering written by Krishnan Murugesan and published by CRC Press. This book was released on 2022-07-29 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook comprehensively covers the fundamentals behind mathematical modeling of engineering problems to obtain the required solution. It comprehensively discusses modeling concepts through conservation principles with a proper blending of mathematical expressions. The text discusses the basics of governing equations in algebraic and differential forms and examines the importance of mathematics as a tool in modeling. It covers important topics including modeling of heat transfer problems, modeling of flow problems, modeling advection-diffusion problems and Navier-Stokes equations in depth. Pedagogical features including solved problems and unsolved exercises are interspersed throughout the text for better understanding. The textbook is primarily written for senior undergraduate and graduate students in the field of mechanical engineering for courses on modeling and simulation. The textbook will be accompanied by teaching resource including a solution manual for the instructors.
Download or read book Modelling and Simulation in Thermal and Chemical Engineering written by J. Thoma and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main object of this advanced textbook is modelling and simulation of energetic processes by bond graphs. But even without knowledge of this powerful method, it can be used to a certain extent as an introduction to simulation in thermodynamics.
Download or read book Modeling and Simulation of Fluid Flow and Heat Transfer written by Reshu Gupta and published by CRC Press. This book was released on 2024-03-14 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the rapidly advancing modern world, scientific and technological understanding and innovation are reaching new heights. Computational fluid dynamics and heat transfer have emerged as powerful tools, playing a pivotal role in the analysis and design of complex engineering problems and processes. With the ability to mathematically model various engineering phenomena, these computational tools offer a deeper understanding of intricate dynamics before the physical prototype is created. Widely employed as simulation tools, computational fluid dynamics and heat transfer codes enable the virtual or digital prototype development of products and devices involving complex transport and multiphasic phenomena. They have become an indispensable element of the agile product development environment across diverse sectors of manufacturing, facilitating accelerated product development cycles. Key features of this book: Covers the analysis of advanced thermal engineering systems Explores the simulation of various fluids with slip effect Applies entropy and optimization techniques to thermal engineering systems Discusses heat and mass transfer phenomena Explores fluid flow and heat transfer in porous media Captures recent developments in analytical and computational methods used to investigate the complex mathematical models of fluid dynamics Covers the application of mathematical and computational modeling techniques to fluid flow problems in various geometries Modeling and Simulation of Fluid Flow and Heat Transfer delves into the fascinating world of fluid dynamics and heat transfer modeling, presenting an extensive exploration of these subjects. This book is a valuable resource for researchers, engineers, and students seeking to comprehend and apply numerical methods and computational tools in fluid dynamics and heat transfer problems.
Download or read book Modelling and Simulation of Turbulent Heat Transfer written by B. Sundén and published by WIT Press. This book was released on 2005-02-21 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing invaluable information for both graduate researchers and R & D engineers in industry and consultancy, this book focuses on the modelling and simulation of fluid flow and thermal transport phenomena in turbulent convective flows. Its overall objective is to present state-of-the-art knowledge in order to predict turbulent heat transfer processes in fundamental and idealized flows as well as in engineering applications. The chapters, which are invited contributions from some of the most prominent scientists in this field, cover a wide range of topics and follow a unified outline and presentation to aid accessibility.
Download or read book Applications of Computational Fluid Dynamics Simulation and Modeling written by Suvanjan Bhattacharyya and published by BoD – Books on Demand. This book was released on 2022-10-26 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides well-balanced coverage of computational fluid dynamics analysis for thermal and flow characteristics of various thermal and flow systems. It presents the latest research work to provide insight into modern thermal engineering applications. It also discusses enhanced heat transfer and flow characteristics.
Download or read book Thermofluid Modeling for Energy Efficiency Applications written by Mohammad Masud Kamal Khan and published by Academic Press. This book was released on 2015-09-01 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermofluid Modeling for Sustainable Energy Applications provides a collection of the most recent, cutting-edge developments in the application of fluid mechanics modeling to energy systems and energy efficient technology. Each chapter introduces relevant theories alongside detailed, real-life case studies that demonstrate the value of thermofluid modeling and simulation as an integral part of the engineering process. Research problems and modeling solutions across a range of energy efficiency scenarios are presented by experts, helping users build a sustainable engineering knowledge base. The text offers novel examples of the use of computation fluid dynamics in relation to hot topics, including passive air cooling and thermal storage. It is a valuable resource for academics, engineers, and students undertaking research in thermal engineering. - Includes contributions from experts in energy efficiency modeling across a range of engineering fields - Places thermofluid modeling and simulation at the center of engineering design and development, with theory supported by detailed, real-life case studies - Features hot topics in energy and sustainability engineering, including thermal storage and passive air cooling - Provides a valuable resource for academics, engineers, and students undertaking research in thermal engineering
Download or read book Thermofluid Modeling for Energy Efficiency Applications written by M. M. K. Khan and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Thermofluid Modeling for Sustainable Energy Applications provides a collection of the most recent, cutting-edge developments in the application of fluid mechanics modeling to energy systems and energy efficient technology. Each chapter introduces relevant theories alongside detailed, real-life case studies that demonstrate the value of thermofluid modeling and simulation as an integral part of the engineering process. Research problems and modeling solutions across a range of energy efficiency scenarios are presented by experts, helping users build a sustainable engineering knowledge base. The text offers novel examples of the use of computation fluid dynamics in relation to hot topics, including passive air cooling and thermal storage. It is a valuable resource for academics, engineers, and students undertaking research in thermal engineering"--OCLC.
Download or read book Fluid Mechanics and Heat Transfer written by Kaveh Hariri Asli and published by CRC Press. This book was released on 2015-06-10 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This valuable new book focuses on new methods and techniques in fluid mechanics and heat transfer in mechanical engineering. The book includes the research of the authors on the development of optimal mathematical models and also uses modern computer technology and mathematical methods for the analysis of nonlinear dynamic processes.It covers techn
Download or read book Modeling and Simulation of Thermal Power Plants with ThermoSysPro written by Baligh El Hefni and published by Springer. This book was released on 2019-01-24 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the modelling and simulation of thermal power plants, and introduces readers to the equations needed to model a wide range of industrial energy processes. Also featuring a wealth of illustrative, real-world examples, it covers all types of power plants, including nuclear, fossil-fuel, solar and biomass. The book is based on the authors’ expertise and experience in the theory of power plant modelling and simulation, developed over many years of service with EDF. In more than forty examples, they demonstrate the component elements involved in a broad range of energy production systems, with detailed test cases for each chemical, thermodynamic and thermo-hydraulic model. Each of the test cases includes the following information: • component description and parameterization data; • modelling hypotheses and simulation results; • fundamental equations and correlations, with their validity domains; • model validation, and in some cases, experimental validation; and • single-phase flow and two-phase flow modelling equations, which cover all water and steam phases. A practical volume that is intended for a broad readership, from students and researchers, to professional engineers, this book offers the ideal handbook for the modelling and simulation of thermal power plants. It is also a valuable aid in understanding the physical and chemical phenomena that govern the operation of power plants and energy processes.
Download or read book Numerical Simulation of Fluid Flow and Heat Mass Transfer Processes written by N.C. Markatos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational fluid flow is not an easy subject. Not only is the mathematical representation of physico-chemical hydrodynamics complex, but the accurate numerical solution of the resulting equations has challenged many numerate scientists and engineers over the past two decades. The modelling of physical phenomena and testing of new numerical schemes has been aided in the last 10 years or so by a number of basic fluid flow programs (MAC, TEACH, 2-E-FIX, GENMIX, etc). However, in 1981 a program (perhaps more precisely, a software product) called PHOENICS was released that was then (and still remains) arguably, the most powerful computational tool in the whole area of endeavour surrounding fluid dynamics. The aim of PHOENICS is to provide a framework for the modelling of complex processes involving fluid flow, heat transfer and chemical reactions. PHOENICS has now been is use for four years by a wide range of users across the world. It was thus perceived as useful to provide a forum for PHOENICS users to share their experiences in trying to address a wide range of problems. So it was that the First International PHOENICS Users Conference was conceived and planned for September 1985. The location, at the Dartford Campus of Thames Polytechnic, in the event, proved to be an ideal site, encouraging substantial interaction between the participants.
Download or read book Introduction to Thermal and Fluid Engineering written by Allan D. Kraus and published by CRC Press. This book was released on 2011-09-06 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Thermal and Fluid Engineering combines coverage of basic thermodynamics, fluid mechanics, and heat transfer for a one- or two-term course for a variety of engineering majors. The book covers fundamental concepts, definitions, and models in the context of engineering examples and case studies. It carefully explains the methods used to evaluate changes in equilibrium, mass, energy, and other measurable properties, most notably temperature. It then also discusses techniques used to assess the effects of those changes on large, multi-component systems in areas ranging from mechanical, civil, and environmental engineering to electrical and computer technologies. Includes a motivational student study guide on CD to promote successful evaluation of energy systems This material helps readers optimize problem solving using practices to determine equilibrium limits and entropy, as well as track energy forms and rates of progress for processes in both closed and open thermodynamic systems. Presenting a variety of system examples, tables, and charts to reinforce understanding, the book includes coverage of: How automobile and aircraft engines work Construction of steam power plants and refrigeration systems Gas and vapor power processes and systems Application of fluid statics, buoyancy, and stability, and the flow of fluids in pipes and machinery Heat transfer and thermal control of electronic components Keeping sight of the difference between system synthesis and analysis, this book contains numerous design problems. It would be useful for an intensive course geared toward readers who know basic physics and mathematics through ordinary differential equations but might not concentrate on thermal/fluids science much further. Written by experts in diverse fields ranging from mechanical, chemical, and electrical engineering to applied mathematics, this book is based on the assertion that engineers from all walks absolutely must understand energy processes and be able to quantify them.
Download or read book Modeling and Simulation in Chemical Engineering written by Christo Boyadjiev and published by Springer Nature. This book was released on 2021-12-08 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a theoretical analysis of the modern methods used for modeling various chemical engineering processes. Currently, the two primary problems in the chemical industry are the optimal design of new devices and the optimal control of active processes. Both of these problems are often solved by developing new methods of modeling. These methods for modeling specific processes may be different, but in all cases, they bring the mathematical description closer to the real processes by using appropriate experimental data. In this book, the authors detail a new approach for the modeling of chemical processes in column apparatuses. Further, they describe the types of neural networks that have been shown to be effective in solving important chemical engineering problems. Readers are also presented with mathematical models of integrated bioethanol supply chains (IBSC) that achieve improved economic and environmental sustainability. The integration of energy and mass processes is one of the most powerful tools for creating sustainable and energy efficient production systems. This book defines the main approaches for the thermal integration of periodic processes, direct and indirect, and the recent integration of small-scale solar thermal dryers with phase change materials as energy accumulators. An exciting overview of new approaches for the modeling of chemical engineering processes, this book serves as a guide for the important innovations being made in theoretical chemical engineering.
Download or read book CFD Modeling and Simulation in Materials Processing 2018 written by Laurentiu Nastac and published by Springer. This book was released on 2018-01-10 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents contributions on computational fluid dynamics (CFD) modeling and simulation of engineering processes from researchers and engineers involved in the modeling of multiscale and multiphase phenomena in material processing systems. The following processes are covered: Additive Manufacturing (Selective Laser Melting and Laser Powder Bed Fusion); Ironmaking and Steelmaking (Ladle Metallurgical Furnace, EAF, Continuous Casting, Blown Converter, Reheating Furnace, Rotary Hearth Furnace); Degassing; High Pressure Gas Atomization of Liquid Metals; Electroslag Remelting; Electrokinetic Deposition; Friction Stir Welding; Quenching; High Pressure Die Casting; Core Injection Molding; Evaporation of Metals; Investment Casting; Electromagnetic Levitation; Ingot Casting; Casting and Solidification with External Field (electromagnetic stirring and ultrasonic cavitation) Interaction and Microstructure Evolution The collection also covers applications of CFD to engineering processes, and demonstrates how CFD can help scientists and engineers to better understand the fundamentals of engineering processes.
Download or read book Spray Simulation written by Udo Fritsching and published by Cambridge University Press. This book was released on 2004-02-26 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spray forming combines the metallurgical processes of metal casting and powder metallurgy to fabricate metal products with enhanced properties. This book provides an introduction to the various modelling and simulation techniques employed in spray forming, and shows how they are applied in process analysis and development. The author begins by deriving and describing the main models. He then presents their application in the simulation of the key features of spray forming. Wherever possible he discusses theoretical results with reference to experimental data. Building on the features of metal spray forming, he also derives common characteristic modelling features that may be useful in the simulation of related spray processes. The book is aimed at researchers and engineers working in process technology, chemical engineering and materials science.
Download or read book Chemically Reacting Flow written by Robert J. Kee and published by John Wiley & Sons. This book was released on 2017-09-27 with total page 1013 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the theoretical underpinnings and practical applications of chemically reacting flow Chemically Reacting Flow: Theory, Modeling, and Simulation, Second Edition combines fundamental concepts in fluid mechanics and physical chemistry while helping students and professionals to develop the analytical and simulation skills needed to solve real-world engineering problems. The authors clearly explain the theoretical and computational building blocks enabling readers to extend the approaches described to related or entirely new applications. New to this Second Edition are substantially revised and reorganized coverage of topics treated in the first edition. New material in the book includes two important areas of active research: reactive porous-media flows and electrochemical kinetics. These topics create bridges between traditional fluid-flow simulation approaches and transport within porous-media electrochemical systems. The first half of the book is devoted to multicomponent fluid-mechanical fundamentals. In the second half the authors provide the necessary fundamental background needed to couple reaction chemistry into complex reacting-flow models. Coverage of such topics is presented in self-contained chapters, allowing a great deal of flexibility in course curriculum design. • Features new chapters on reactive porous-media flow, electrochemistry, chemical thermodynamics, transport properties, and solving differential equations in MATLAB • Provides the theoretical underpinnings and practical applications of chemically reacting flow • Emphasizes fundamentals, allowing the analyst to understand fundamental theory underlying reacting-flow simulations • Helps readers to acquire greater facility in the derivation and solution of conservation equations in new or unusual circumstances • Reorganized to facilitate use as a class text and now including a solutions manual for academic adopters Computer simulation of reactive systems is highly efficient and cost-effective in the development, enhancement, and optimization of chemical processes. Chemically Reacting Flow: Theory, Modeling, and Simulation, Second Edition helps prepare graduate students in mechanical or chemical engineering, as well as research professionals in those fields take utmost advantage of that powerful capability.
Download or read book Introduction to Thermal and Fluids Engineering written by Deborah A. Kaminski and published by John Wiley & Sons. This book was released on 2017-02-14 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: This innovative book uses unifying themes so that the boundaries between thermodynamics, heat transfer, and fluid mechanics become transparent. It begins with an introduction to the numerous engineering applications that may require the integration of principles and tools from these disciplines. The authors then present an in-depth examination of the three disciplines, providing readers with the necessary background to solve various engineering problems. The remaining chapters delve into the topics in more detail and rigor. Numerous practical engineering applications are mentioned throughout to illustrate where and when certain equations, concepts, and topics are needed. A comprehensive introduction to thermodynamics, fluid mechanics, and heat transfer, this title: Develops governing equations and approaches in sufficient detail, showing how the equations are based on fundamental conservation laws and other basic concepts. Explains the physics of processes and phenomena with language and examples that have been seen and used in everyday life. Integrates the presentation of the three subjects with common notation, examples, and problems. Demonstrates how to solve any problem in a systematic, logical manner. Presents material appropriate for an introductory level course on thermodynamics, heat transfer, and fluid mechanics.
