Download or read book Modeling and Simulation in Manufacturing and Defense Acquisition written by National Research Council and published by National Academies Press. This book was released on 2002-08-01 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Committee on Modeling and Simulation Enhancements for 21st Century Manufacturing and Acquisition was formed by the NRC in response to a request from the Defense Modeling and Simulation Office (DMSO) of DOD. The committee was asked to (1) investigate next-generation evolutionary and revolutionary M&S capabilities that will support enhanced defense systems acquisition; (2) identify specific emerging design, testing, and manufacturing process technologies that can be enabled by advanced M&S capabilities; (3) relate these emerging technologies to long-term DOD requirements; (4) assess ongoing efforts to develop advanced M&S capabilities and identify gaps that must be filled to make the emerging technologies a reality; (5) identify lessons learned from industry; and (6) recommend specific government actions to expedite development and to enable maximum DOD and U.S. commercial benefit from these capabilities. To complete its task, the committee identified relevant trends and their impact on defense acquisition needs; current use and support for use of M&S within DOD; lessons learned from commercial manufacturing; three cross-cutting and especially challenging uses of M&S technologies; and the areas in which basic research is needed in M&S in order to achieve the desired goals for manufacturing and defense acquisition.
Download or read book Modeling and Simulation in Manufacturing and Defense Acquisition written by National Research Council and published by National Academies Press. This book was released on 2002-07-01 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Committee on Modeling and Simulation Enhancements for 21st Century Manufacturing and Acquisition was formed by the NRC in response to a request from the Defense Modeling and Simulation Office (DMSO) of DOD. The committee was asked to (1) investigate next-generation evolutionary and revolutionary M&S capabilities that will support enhanced defense systems acquisition; (2) identify specific emerging design, testing, and manufacturing process technologies that can be enabled by advanced M&S capabilities; (3) relate these emerging technologies to long-term DOD requirements; (4) assess ongoing efforts to develop advanced M&S capabilities and identify gaps that must be filled to make the emerging technologies a reality; (5) identify lessons learned from industry; and (6) recommend specific government actions to expedite development and to enable maximum DOD and U.S. commercial benefit from these capabilities. To complete its task, the committee identified relevant trends and their impact on defense acquisition needs; current use and support for use of M&S within DOD; lessons learned from commercial manufacturing; three cross-cutting and especially challenging uses of M&S technologies; and the areas in which basic research is needed in M&S in order to achieve the desired goals for manufacturing and defense acquisition.
Download or read book Defense Modeling and Simulation written by and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: I believe this industry day is timely because the Department of Defense, through adoption of a Modeling and Simulation Master Plan in October of 1995, has begun to move forward on a more coherent strategy for improving oversight and coordination of DoD modeling and simulation activities. In a budget constrained environment, we simply can not afford to waste dollars on redundant, stove-piped efforts - we need to be able to get more mileage out of the models and simulations we build. In an environment that is increasingly joint, often coalition, and involving system of systems architectural trades, we must be able to link simulations together and interoperate them in federations. To do that we have to find ways to facilitate their interoperability and reusability. DoD modeling and simulation activities need to be anchored in a common technical architecture and interchange data which is both authoritative and means the same thing to everyone. For the remainder of my talk today, I would like to give you the Department's perspective on the use of modeling and simulation to improve training, decision support and weapon system acquisition.
Download or read book Study on the Effectiveness of Modeling and Simulation in the Weapon System Acquisition Process written by and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In August 1995, I commissioned a one year study with the objective of assessing the effectiveness of the use of modeling and simulation (M & S) in the acquisition process. In particular, I was looking for the metrics by which the Department of Defense could ascertain the value-if any-that was returned on its investment in M & S in terms of the reduction in time, resources, and risk in weapons systems development and fielding and in terms of increase in the military utility of those systems. I also tasked the study team while gathering information to support the assessment to note technical and other challenges to realizing the postulated benefits and to report on specific M & S tools and processes being used to facilitate the acquisition of systems in the DoD and industry. This report, which documents the results of that study, provides tangible, quantitative indicators that the use of M & S can provide substantial benefit measured in time, cost, productivity, and system quality and performance. The evidence is consistent and pervasive, across both DoD and industry. I personally was impressed that the most significant return on investment was realized when M & S was used as an integrator of functions within the acquisition process, i.e., integrating design and manufacturing or linking requirements more closely to test. This leads me to believe that its real value lies as an enabler of Integrated Product and Process Development (IPPD).
Download or read book Defense Modeling Simulation and Analysis written by National Research Council and published by National Academies Press. This book was released on 2006-09-22 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, simulation, and analysis (MS&A) is a crucial tool for military affairs. MS&A is one of the announced pillars of a strategy for transforming the U.S. military. Yet changes in the enterprise of MS&A have not kept pace with the new demands arising from rapid changes in DOD processes and missions or with the rapid changes in the technology available to meet those demands. To help address those concerns, DOD asked the NRC to identify shortcomings in current practice of MS&A and suggest where and how they should be resolved. This report provides an assessment of the changing mission of DOD and environment in which it must operate, an identification of high-level opportunities for MS&A research to address the expanded mission, approaches for improving the interface between MS&A practitioners and decision makers, a discussion of training and continuing education of MS&A practitioners, and an examination of the need for coordinated military science research to support MS&A.
Download or read book Study on the Effectiveness of Modeling and Simulation in the Weapon System Acquisition Process written by Annie Patenaude and published by . This book was released on 1996 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Use of Modeling Simulation M S Tools in Acquisition Program Offices Results of a Survey written by and published by . This book was released on 2001 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DoD Deputy Director, Operational Test and Evaluation / Live Fire Testing (DDOT & E/LFT) through the DOT & E, tasked Hicks & Associates (HA & I) to conduct a survey of models and simulations (M & S) being used in support of defense acquisition programs. The tasking came as the direct result of issues first raised in an article which was published in DSMC's Program Manager (PM) Magazine in their March - April 1999 issue entitled "Meet MASTER: Modeling & Simulation Test & Evaluation Reform: Energizing the M & S Support Structure". The MASTER concept includes a number of proposals including the formation of an M & S Consortium and the possibility of finding this Consortium by tapping into the budgets of the acquisition systems which would benefit from M & S. However, when the question of how much is currently being spent in support of M & S, and related questions as to who is spending it and for what, there was little, if any, comprehensive data upon which to base a response. The purpose, then of the Hicks tasking was to identify, characterize, and determine the extent of M & S applications across a range of program office activities -- from concept exploration and engineering development through production and logistical support to systems in the field.
Download or read book Simulation based acquisition a new approach written by and published by DIANE Publishing. This book was released on with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book DoD Modeling and Simulation M S Master Plan written by United States. Office of the Under Secretary of Defense for Acquisition and Technology and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Systems Acquisition Manager s Guide for the Use of Models and Simulations written by Lalit K. Piplani and published by . This book was released on 1994 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Perspectives on the Use of M S to Support Systems Acquisition written by and published by . This book was released on 2002 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis Analysis Practices and Implications for Modeling and Simulation written by Paul K. Davis and published by Rand Corporation. This book was released on 2007 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: An examination of analysis and analysis practices for defense planning, the paper1s purpose is to delineate priorities for the way ahead, i.e., for investments and other actions to ensure that future models and simulations will serve the needs of decisionmakers. The analysis in question is accomplished for Quadrennial Reviews and for continuing work on capability assessments, requirements analysis, and program analysis.
Download or read book Developmemnt sic of a Modeling and Simulation Training Needs Model for Selected Defense Acquisition Workforce Communities written by Lik Chun Peh and published by . This book was released on 2008 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DoD Modeling and Simulation Steering Committee (M & S SC) identified Modeling and Simulation (M & S) as an educational objective for the Acquisition, Technology and Logistics (AT & L) workforce. Notably, past usages of M & S in system acquisitions for both DoD and commercial industry have demonstrated improvements in efficiency and effectiveness over traditional acquisition techniques. However, to achieve expected and consistent performance by this workforce in these new techniques, the M & S essential skill requirements for this workforce may be extensive. This research aims to validate the content and level of competency in selected M & S tools and technology necessary for consistent workforce performance. The notion here is to achieve greater efficiency and effectiveness in the acquisition process through thresholds of competency that must be resident in or available to the acquisition workforce. This research proposes a matrix of training objectives and levels of competency for portions of the AT & L workforce that was validated through survey by individuals who are leading experts in both M & S and acquisition. This effort combines rigorously defined learning objectives and parameters by academia with practical learning insights from the military and industry ground perspectives. The resultant Joint Learning Model aims to identify the workforce educational foundations necessary to achieve more widespread efficiency and effectiveness in current and future DoD acquisitions.
Download or read book Defense Science Board task force report engineering in the manufacturing process written by United States. Defense Science Board. Task Force on Engineering in the Manufacturing Process and published by DIANE Publishing. This book was released on 1993 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Hierarchy of Models and Simulations Used in Support of System Acquisition written by and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is an assessment of the various steps within the M & S hierarchy typically used in the system acquisition life cycle of a weapon system. This assessment addresses the different levels of M & S fidelity and scope within a hierarchy and how the IPPD management technique utilizes the M & S results to support the Milestone Decision Authority (MDA) associated with system acquisition. Also, this document addresses interoperability between the different levels of within the hierarchy and provides a recommended effort between two popular M & S currently being used by a variety of DoD agencies. These are the FireSim21 force level and GENEric Smart Indirect fire (GENESIS) many on many engagement level M & S.
Download or read book Engineering Principles of Combat Modeling and Distributed Simulation written by Andreas Tolk and published by John Wiley & Sons. This book was released on 2012-03-20 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the military and combat applications of modeling and simulation Engineering Principles of Combat Modeling and Distributed Simulation is the first book of its kind to address the three perspectives that simulation engineers must master for successful military and defense related modeling: the operational view (what needs to be modeled); the conceptual view (how to do combat modeling); and the technical view (how to conduct distributed simulation). Through methods from the fields of operations research, computer science, and engineering, readers are guided through the history, current training practices, and modern methodology related to combat modeling and distributed simulation systems. Comprised of contributions from leading international researchers and practitioners, this book provides a comprehensive overview of the engineering principles and state-of-the-art methods needed to address the many facets of combat modeling and distributed simulation and features the following four sections: Foundations introduces relevant topics and recommended practices, providing the needed basis for understanding the challenges associated with combat modeling and distributed simulation. Combat Modeling focuses on the challenges in human, social, cultural, and behavioral modeling such as the core processes of "move, shoot, look, and communicate" within a synthetic environment and also equips readers with the knowledge to fully understand the related concepts and limitations. Distributed Simulation introduces the main challenges of advanced distributed simulation, outlines the basics of validation and verification, and exhibits how these systems can support the operational environment of the warfighter. Advanced Topics highlights new and developing special topic areas, including mathematical applications fo combat modeling; combat modeling with high-level architecture and base object models; and virtual and interactive digital worlds. Featuring practical examples and applications relevant to industrial and government audiences, Engineering Principles of Combat Modeling and Distributed Simulation is an excellent resource for researchers and practitioners in the fields of operations research, military modeling, simulation, and computer science. Extensively classroom tested, the book is also ideal for courses on modeling and simulation; systems engineering; and combat modeling at the graduate level.
Download or read book Retooling Manufacturing written by National Research Council and published by National Academies Press. This book was released on 2004-09-30 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the Department of Defense continues development of the future warrior system, the difficulty of moving rapidly from design to manufacturing for complex technologies is becoming a major concern. In particular, there are communication gaps between design and manufacturing that hinder rapid development of new products important for these future military developments. To help address those concerns, DOD asked the NRC to develop a framework for "bridging" these gaps through data management, modeling, and simulation. This report presents the results of this study. It provides a framework for virtual design and manufacturing and an assessment of the necessary tools; an analysis of the economic dimensions; an examination of barriers to virtual design and manufacturing in the DOD acquisition process; and a series of recommendations and research needs.
