Download or read book Modeling and Simulation in Fibrous Materials written by Asis Patanaik and published by Nova Science Publishers. This book was released on 2012-03-01 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Book Description: This book deals with modeling and simulation techniques and its application in the field of fibrous materials. The different modeling and simulation techniques covered in this book include finite element analysis, computational fluid dynamics, artificial neural network, fuzzy logic, empirical and statistical modeling. In addition, this book is a good reference volume for undergraduate to graduate level courses covering the background, current trend and applications of modeling in fibrous materials. This book is also a good source of information for a number of inter-disciplinary departments like mathematics, materials science, mechanical, chemical and textile engineering, and computer science. (Imprint: Nova)
Download or read book Mechanics of Fibrous Materials and Applications written by Catalin Picu and published by Springer. This book was released on 2019-07-31 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores the state of the art in the mechanics of fibrous media, providing an overview of the theoretical, modelling and practical aspects of designing and working with these materials. It also describes the advanced methods needed to handle their specific features, including the mechanics of generalized continua, dedicated homogenization methods and computational techniques, and presents applications of fibrous media to diverse fields and over a broad spectrum of scales, ranging from aeronautics to biomechanics.
Download or read book Advances in Modeling and Simulation in Textile Engineering written by Nicholus Tayari Akankwasa and published by Elsevier. This book was released on 2021-04-07 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Modeling and Simulation in Textile Engineering: New Concepts, Methods, and Applications explains the advanced principles and techniques that can be used to solve textile engineering problems using numerical modeling and simulation. The book draws on innovative research and industry practice to explain methods for the modeling of all of these processes, helping readers apply computational power to more areas of textile engineering. Experimental results are presented and linked closely to processes and methods of implementation. Diverse concepts such as heat transfer, fluid dynamics, three-dimensional motion, and multi-phase flow are addressed. Finally, tools, theoretical principles, and numerical models are extensively covered. Textile engineering involves complex processes which are not easily expressed numerically or simulated, such as fiber motion simulation, yarn to fiber formation, melt spinning technology, optimization of yarn production, textile machinery design and optimization, and modeling of textile/fabric reinforcements. Provides new approaches and techniques to simulate a wide range of textile processes from geometry to manufacturing Includes coverage of detailed mathematical methods for textiles, including neural networks, genetic algorithms, and the finite element method Addresses modeling techniques for many different phenomena, including heat transfer, fluid dynamics and multi-phase flow
Download or read book Multiscale Modeling and Simulation of Composite Materials and Structures written by Young Kwon and published by Springer Science & Business Media. This book was released on 2007-12-04 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in multiscale modeling and simulation techniques for composite materials and structures. It focuses on the structural and functional properties of engineering composites and the sustainable high performance of components and structures. The multiscale techniques can be also applied to nanocomposites which are important application areas in nanotechnology. There are few books available on this topic.
Download or read book Mechanics of Fibrous Materials and Applications written by Catalin Picu and published by . This book was released on 2020 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores the state of the art in the mechanics of fibrous media, providing an overview of the theoretical, modelling and practical aspects of designing and working with these materials. It also describes the advanced methods needed to handle their specific features, including the mechanics of generalized continua, dedicated homogenization methods and computational techniques, and presents applications of fibrous media to diverse fields and over a broad spectrum of scales, ranging from aeronautics to biomechanics.
Download or read book Multi field modeling and simulation of fiber reinforced polymers written by Schulte, Jonathan and published by KIT Scientific Publishing. This book was released on 2023-03-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work proposes a new numerical approach for analyzing the behavior of fiber-reinforced materials, which have gained popularity in various applications. The approach combines theories and methods to model the fracture behavior of the polymeric matrix and the embedded fibers separately, and includes a modified plasticity model that considers the temperature-dependent growth of voids. Tests are conducted to explore different types and sequences of failure in long fiber-reinforced polymers.
Download or read book Advances in Modeling and Simulation in Textile Engineering written by Nicholus Tayari Akankwasa and published by Woodhead Publishing. This book was released on 2021-03-28 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Modeling and Simulation in Textile Engineering: New Concepts, Methods, and Applications explains the advanced principles and techniques that can be used to solve textile engineering problems using numerical modeling and simulation. The book draws on innovative research and industry practice to explain methods for the modeling of all of these processes, helping readers apply computational power to more areas of textile engineering. Experimental results are presented and linked closely to processes and methods of implementation. Diverse concepts such as heat transfer, fluid dynamics, three-dimensional motion, and multi-phase flow are addressed. Finally, tools, theoretical principles, and numerical models are extensively covered. Textile engineering involves complex processes which are not easily expressed numerically or simulated, such as fiber motion simulation, yarn to fiber formation, melt spinning technology, optimization of yarn production, textile machinery design and optimization, and modeling of textile/fabric reinforcements. Provides new approaches and techniques to simulate a wide range of textile processes from geometry to manufacturing Includes coverage of detailed mathematical methods for textiles, including neural networks, genetic algorithms, and the finite element method Addresses modeling techniques for many different phenomena, including heat transfer, fluid dynamics and multi-phase flow
Download or read book Thermal and Moisture Transport in Fibrous Materials written by N Pan and published by Woodhead Publishing. This book was released on 2006-10-30 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transfer of heat and moisture through textiles is vital to the manufacture and design of clothing, technical and protective textiles. Continued advances in textile processing technology, the growth of manufactured nonwovens and the application of nanotechnology have resulted in a wealth of research in order to characterise the behaviour of these materials. Thermal and moisture transport in fibrous materials provides a comprehensive guide of the technological developments and scientific understanding in this area. The first section summarises the structure, geometry and stereology of fibrous materials. The fundamentals of wetting and its dynamics are also discussed. Part two analyses thermal and liquid interactions in textiles and offers insights into the thermodynamic behaviour of moisture as well as heat and moisture coupling. The book concludes with chapters on the human thermoregulatory system, interfacing between fibrous materials and the human body and innovative computer modelling simulations. Thermal and moisture transport in fibrous materials is an essential reference for all those involved in the textile industry, especially those concerned with the design and manufacture of technical textiles and protective clothing. Summarises the structure, geometry and stereology of fibrous materials Discusses the fundamentals of wetting and its dynamics Analyses thermal and liquid interactions in textiles
Download or read book Modelling Stochastic Fibrous Materials with Mathematica written by William Wyatt Sampson and published by Springer Science & Business Media. This book was released on 2008-10-10 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in the use of electrospun fibrous materials, for application in tissue engineering and in carbon fibrous materials in fuel cells, has generated new interest in the dependence of the properties and structure of these materials on those of their constituent fibres. “Modelling Stochastic Fibrous Materials with Mathematica” provides an overview of the structure of stochastic fibrous materials, and the use of Mathematica® to develop models describing their structure and performance. The book introduces the techniques of statistical geometry and probabilistic modelling for non-mathematicians, and assumes no previous experience of Mathematica®. Using accessible notation and by providing examples of Mathematica® code, expressions are derived for the structural characteristics of stochastic fibrous materials providing insights into the ways these depend upon each other and the extent to which they can be modified in the laboratory or in a manufacturing environment.
Download or read book Contact Angle Wettability and Adhesion Volume 5 written by Kash L. Mittal and published by CRC Press. This book was released on 2008-08-31 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the 5th International Symposium on Contact Angle, Wettability and Adhesion, Toronto, Canada, June 2006. Wettability is of pivotal importance in many and varied arenas, ranging from mundane to micro-and nanofluidics to lithography to biomedical. It should be underscored that in the last years there has been
Download or read book Computer simulation of electrically stimulated nerve fibers in the human spinal cord written by and published by Simon Danner. This book was released on 2010 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Materials Sports Equipment Design written by De Huai Yang and published by Trans Tech Publications Ltd. This book was released on 2013-10-31 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 International Conference on Advanced Materials & Sports Equipment Design (AMSED 2013), September 21-23, 2013, Singapore. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 73 papers are grouped as follows: Chapter 1: Materials and Their Application; Chapter 2: Biochemistry and Medicine; Chapter 3: Engineering Research; Chapter 4: Development of Sport Equipment; Chapter 5: Computer Technology in Sports; Chapter 6: Applied Research in Sport.
Download or read book Handbook of Fibrous Materials 2 Volumes written by Jinlian Hu and published by John Wiley & Sons. This book was released on 2020-03-31 with total page 1316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses Handbuch erörtert den aktuellen Stand der Technik bei Faserstoffen und bietet einen breiten Überblick über deren Einsatz in Forschung und Entwicklung. Herausgeber ist ein führender Experte des Fachgebiets. Abhandlungen stammen von erfahrenen Forschern im Bereich Fasern und Textilien. Band 1 legt den Schwerpunkt auf Faserklassen, die Herstellung und Charakterisierung von Fasern. Band 2 stellt Anwendungen vor, darunter auch neue Anwendungen aus den Bereichen Energie, Umweltwissenschaften und Gesundheitswesen. Ein hochaktuelles Fachbuch und einzigartiges Wissenskompendium für Hochschule und Industrie.
Download or read book Modelling Stochastic Fibrous Materials with Mathematica written by William Wyatt Sampson and published by Springer. This book was released on 2009-08-29 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in the use of electrospun fibrous materials, for application in tissue engineering and in carbon fibrous materials in fuel cells, has generated new interest in the dependence of the properties and structure of these materials on those of their constituent fibres. “Modelling Stochastic Fibrous Materials with Mathematica” provides an overview of the structure of stochastic fibrous materials, and the use of Mathematica® to develop models describing their structure and performance. The book introduces the techniques of statistical geometry and probabilistic modelling for non-mathematicians, and assumes no previous experience of Mathematica®. Using accessible notation and by providing examples of Mathematica® code, expressions are derived for the structural characteristics of stochastic fibrous materials providing insights into the ways these depend upon each other and the extent to which they can be modified in the laboratory or in a manufacturing environment.
Download or read book Ceramic Matrix Composites written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2014-10-27 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive source of information on various aspects of ceramic matrix composites (CMC). It covers ceramic and carbon fibers; the fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration and joining. Each chapter in the book is written by specialists and internationally renowned researchers in the field. This book will provide state-of-the-art information on different aspects of CMCs. The book will be directed to researchers working in industry, academia, and national laboratories with interest and professional competence on CMCs. The book will also be useful to senior year and graduate students pursuing degrees in ceramic science and engineering, materials science and engineering, aeronautical, mechanical, and civil or aerospace engineering. Presents recent advances, new approaches and discusses new issues in the field, such as foreign object damage, life predictions, multiscale modeling based on probabilistic approaches, etc. Caters to the increasing interest in the application of ceramic matrix composites (CMC) materials in areas as diverse as aerospace, transport, energy, nuclear, and environment. CMCs are considered ans enabling technology for advanced aeropropulsion, space propulsion, space power, aerospace vehicles, space structures, as well as nuclear and chemical industries. Offers detailed descriptions of ceramic and carbon fibers; fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration/joining.
Download or read book Numerical Methods and Advanced Simulation in Biomechanics and Biological Processes written by Miguel Cerrolaza and published by Academic Press. This book was released on 2017-10-17 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods and Advanced Simulation in Biomechanics and Biological Processes covers new and exciting modeling methods to help bioengineers tackle problems for which the Finite Element Method is not appropriate. The book covers a wide range of important subjects in the field of numerical methods applied to biomechanics, including bone biomechanics, tissue and cell mechanics, 3D printing, computer assisted surgery and fluid dynamics. Modeling strategies, technology and approaches are continuously evolving as the knowledge of biological processes increases. Both theory and applications are covered, making this an ideal book for researchers, students and R&D professionals. Provides non-conventional analysis methods for modeling Covers the Discrete Element Method (DEM), Particle Methods (PM), MessLess and MeshFree Methods (MLMF), Agent-Based Methods (ABM), Lattice-Boltzmann Methods (LBM) and Boundary Integral Methods (BIM) Includes contributions from several world renowned experts in their fields Compares pros and cons of each method to help you decide which method is most applicable to solving specific problems
Download or read book Microcomputer Modeling of Growth Processes of Single crystal Sheets and Fibers written by Thomas F. George and published by Nova Publishers. This book was released on 2006 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre (rod) and sheet-shaped crystals with specified size for use as final products without additional machining are required in various applications of modern engineering. In order to avoid formation of internal mechanical stress in the crystal, lateral surface shaping without contact with container walls is preferred. As the crystal is not restricted by crucible walls, its cross-section is determined by the meniscus-shaping capillary forces and the heat and mass-exchange in the melt-crystal system. Any variation of the pulling rate, pressure, temperature gradient in the furnace, and melt temperature at the meniscus base leads to a change in the crystal cross-section and to pinch formation. Over the past two decades, many experimental and theoretical studies have been reported on a powerful approach to crystal lateral surface shaping without contact with container walls, namely the so-called edge-defined film-fed growth (EFG) technique. The shape and size of a single crystal grown by EFG is determined by the shape and size of the meniscus, (i.e: the liquid bridge retained between the die and the crystal) which depend on the radius or half-thickness of the die and other properties such as pulling rate, pressure, temperature gradient and melt temperature. In this book, theoretical and numerical results are obtained using a non-linear mathematical model of the EFG method. Theoretical results presented for fibres and sheets are rigorously obtained on the basis of the equations of the model. Numerical results are obtained on the basis of theoretical results using experimental data. Such results offer a complete package of the possibilities of the model for equipment designers and practical crystal growers.
